Used Edge Gluing Machine for sale (65,160)

Condition: new, Clean air extraction / dust extractor Dust-tested to H3, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic chips High extraction performance with low space requirement Maximum performance in this class Very quiet Designed for commercial use Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right for flexible use Large inspection openings Large, mobile chip container with clamping bracket and chip collection bag Dust extractor already fully assembled on delivery, so can be used quickly All models are mobile Polyester fleece filter material, aluminized, therefore with long service life Antistatic filter tested and approved to category M-BIA as standard The fan is connected downstream of the filter Efficiency class extraction motor IE3 Nominal volume flow 1448 m³/h Nominal negative pressure 2242 Pa Power drive motor 2.2 kW, 400 V, 50 Hz Chip collection volume 2 x 165 l Nominal width of external suction connection inlet 160 mm Filter area 9.21 m² Residual dust content < 0.1 mg/m³ Sound pressure level max. 73 dB(A) L x W x H approx. = 1618 x 830 x 1653 mm Weight approx. 268 kg VERSION PM Automatic filter cleaning with pneumatic system that moves a scraper frame Ffodpsr A Eq Refx Abueu

Condition: excellent (used), Year of construction: 2002, edge seize 0,2 - 12 mm work piece dimension width min. 70 mm height min. / max. 8 / 42 mm length min 160 mm (strips) length min 60 mm from roll Durchlaufgeschwindigkeit: 12 m/ min glue coating with roller working height : 880 mm compressed air 6 bar,1/4 Zoll suction connection, DM 160 mm dimensions: L x W x H = 5600 x 950 x 1300 mm weight: ca. 2200 kg total conection: ca. 11,5 kW, 400 V, 50 Hz machine equipped with: - double top roll pressure with electric height adjustment - autom. roll magazine for rolls up to 800 mm DM, pneumatic cutting up to 3 mm - autom. infeed fence - no adjustment of edge seize premilling aggregate with 2 HF-motors 1,5 kW, 12000 n double end trim unit - 2 HF-motors 0,2 kW, 12.000 n 2 autom. positions = 0 + 3 deg. flush trimming aggregate with 2 HF-motors 0,7 kW, 12.000 n radius trimming unit - with2 HF-motors 0, 3 kW, 12.000 n, radius scraping unit, autom. set in flat scraping unit Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. Ffjdpfx Abehy Tlrjueu (We answer your inquiries only with stated address + telephone number!)

Condition: new, The model ME 40TR is SCM’s ‘bestseller and in this category offering unrivaled price / performance ratio. We can offer the following new machine SCM me 40tr, CE Volt 400 EU, frequency 50 Hz edge thickness coils 0,4 - 3 mm max. edge thickness strips 5 mm min. – max. work piece thickness 8 - 50 mm Ffodsc S Di Repfx Abueu feed speed 9 m/ min glue pot unit 0,18 kW, capacity 0,8 kg premiling aggregate 2,2 kW, 9000 U/ min end-cutting unit with "Radius" allows you to make a radius on the corners of the edged panel trimming unit 2 x 0,35 kW, 12.000 U/ min OPTIONAL device for panel preheating edge scraping unit flat scraping unit grooving unit 1,1 kW, 12.000 U/ min, notch width 4 mm brushing unit with 2 independent motors magazine for strip edges kid for quick exchange of glue unit ...

Condition: new, Hebrock Model F 2 next Offer type: New machine, SALE ONLY IN AUSTRIA! Immediately available new machine with special offer price and full manufacturer warranty. The 3.3 m long F 2 is not only inexpensive and space-saving. It also has the equipment you need to process perfect edges right from the start: diamond-tipped jointing cutters guarantee excellently prepared workpieces for edging. The equipment includes a jointing unit (up to 2 mm milling depth), the top-mounted fast heating glue container, cross-cut saw and combination router. Optionally, the F 2 can also be equipped with a surface scraper. max. edge thickness: 3 mm max. workpiece thickness: 50 mm Ready for operation in 3.5 min Feed rate approx. 10 m/min Equipment: Edge banding machine F2 next With PLC control (incl. touch screen) Hot melt glue application to the workpiece for edgebanding material up to 3 mm jointing cutter (incl. slide - tool) up to 2 mm milling depth maintenance-free glue basin with change basin pre-equipment incl. glue discharge device HF crosscut saw station (approx. 12000 rpm) HF milling station (approx. 12000 rpm) with separate pneumatic milling adjustment and interchangeable plate milling cutter (combination version) robust chain drive ball bearing mounted double roller top pressure viewing window from rear side of machine extractable workpiece support Including special equipment: Fedpel D Rp Ejfx Abuofu F2/12 surface scraper (incl. pneum. lift) F2/30 pneumatic 3-point adjustment (radius- ,chamfer-, flush milling) F2/27 Nesting for milling stations

Condition: excellent (used), Year of construction: 2007, Edge thickness 0.2 - 12 mm Workpiece thickness 8 - 52 mm Workpiece width min. 70 mm Workpiece length min. 150 mm Automatic edge magazine milling unit 2 x 1.5 kW, application-controlled Cut-off unit 2 x 0.3 kW Flush trimming unit 2 x 0.7 kW, scanning on one side Fine trimming unit 2 x 0.35 kW, tiltable 15/ 30/ 45 degrees Fine trimming unit 2 x 0.3 kW, R=2, scanning on both sides Corner copying unit 2 x 0.3 kW Scraper unit, autom. in/ out Flat scraper unit Buffing unit 2 x 0.2 kW, oscillating 5 x spray device (2 x release agent, 1 x lubricant, 2 x cleaning agent) Ffodpfslc Ewisx Abuju Color touch screen control OTT C3 Motorized height adjustment Feed 10 - 14 m/min COMBI MELT gluing part for EVA/ PUR, volume 1.5 l CE mark Total connection 12.6 kW Dimensions L x W x H approx. = 6120 x 840 x 1500 mm Weight approx. 2,900 kg

Condition: excellent (used), Edge trimming machine Working height: 800 mm Fsdpfxewiwnqo Abuofu Dimensions (L x W x H): approx. 1,060 x 720 x 930 mm Compressed air connection: 6 bar Weight: approx. 120 kg Including cutter

Condition: excellent (used), Year of construction: 1993, max. edge thickness coils 0.2 - 3 mm max. edge thickness solid strips15 mm feed speed 12/ 18 m/min glue plot heating time approx. 6 min autom. strip magazine coil magazine granulate heating pot flush trimming unit radius trimming unit operating panel extendable work piece support noice cancelation hood machine length 3800 mm Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. Fjdpefbr S Rsfx Abusfu (We answer your inquiries only with stated address + telephone number!)

Condition: good (used), Year of construction: 1988, Work piece thickness 0,4 - 8 mm Work piece height max. 51 mm Min. work piece width 50 mm min work piece length 180 mm edge magazine for PVC and strips pneumatic pressure rollers for edge magazine edge snipping unit cutting unit with 2 saws milling aggregate buffing unit Feed speed 11 m/ min Glue application with fin nozzle Air pressure 6 bar Ffedpfobahd Ejx Abuju length 3750 mm

Condition: used, Used machine Fedpfxjwwxyks Abusfu

Year of construction: 2011, condition: used, functionality: fully functional, machine/vehicle number: #1211, COMANDULLI Edge Grinding Machine Model EDILUX 10+4 SX • Belt running direction: LEFT to RIGHT, year of manufacture 2011, #1211 • 10 edge grinding units, 130 & 150 mm, with vertical oscillation • 2 pneumatic lower / 2 upper chamfering units Ffodeygxwmjpfx Abusu • Bevel/profile milling unit, manual height and side adjustment • 2 pneumatic regrinding units from above • Water groove milling unit above & below, manual height and side adjustment • Separate operator panel on swivel arm • Table extension console • Water tray • Space requirement approx. 600 x 180 cm Can be inspected under power – available from mid/end of March 03/2026

Condition: used, Year of construction: 1996, Direction of plate movement: from operator to the left Max. edge thickness: 8.0 mm Ffsdoxwdp Ujpfx Abuou Min. workpiece width: 70 mm Feed speed: 11 m/min Heating time: 4.5 min Automatic roll magazine: Yes Cutting shears up to: 0.2 - 3.0 mm Single-edge feed: Yes Automatic gluing: Glue pot with granulate, top-mounted Cut-off saw: fixed 90° Flush trimming unit: Yes Combination trimming unit: Yes Aggregate display: infeed display Control type: manual Operation: selector switch/push buttons Mobile version: No Protective hood: Yes Working height or feed table height: 870 mm Approx. weight: 670 kg Dimensions: 3600 x 1400 x 1200 mm Motor power: 11 kW Extraction diameter: 120 mm Storage location: Nattheim

Condition: used, Year of construction: 1996, Oscillation ja ja / nein Fedovwfc Tjpfx Abuefu nein ja/nein ja ja/nein Motor output 2,8 kW Table dimensions 840x340 mm Weight ca. 350 kg

Condition: new, 3 mm Total length 4122 mm Feed speed 10 m/min. Fodpsvwd Uusfx Abusfu with PLC control (incl. touchscreen) and hot-melt adhesive application to the workpiece foredgebanding material up to 3 mmjointing cutter (incl. DIA tool) up to 2 mm cutter depth1),maintenance-free glue tray with change tray pre-equipment incl. adhesive discharge device,HF cross-cut saw station (approx. 12,000 rpm),HF trimming station (approx. 12,000 rpm) with separate pneumatic trimming adjustment andchange plate trimmer (combined version),corner rounding cutter,surface scraper (incl. pneumatic discharge device) with separate pneumatic trimming adjustment andchange plate trimmer (combined version),corner rounding cutter) with separate pneumatic routing adjustment andinterchangeable plate router (combi version),corner rounding router,surface scraper (incl. pneumatic lift-out),free space (for cleaning station or radius scraper),robust chain drive,ball bearing mounted double roller top pressure,viewing window from rear of machine,pull-out workpiece support,feed rate approx. 10 m/. No. F4/00/11- Joining head WhispercutF4/500/10- Combination milling headF4/500/20- Radius milling cutter R=2mmF4/500/2- Radius corner milling cutter R=2mmF4/08/2- Quick-change equipment for corner milling cutterF4/08/4- Radius scraper (incl. F4/09- Radius radius scraper R=2mmF4/09/2- ChassisF4/10- Pneumatic 3-point adjustment(radius, chamfer, flush milling)F4/30

Condition: new, Year of construction: 2022, Stock saleYear of manufacture 2022Description:- Separate work table for solid wood and veneer sanding, manually swivelable by 45° or 35°- The stop for veneer sanding can be adjusted to 0,1 mm- Motorized height-adjustable sanding unit- Additional table with suction openings for sanding radii on the rubberized deflection roller- Sanding sleeve device with attachable work table- The welded steel machine stand guarantees high torsional rigidity and vibration-free working- Oscillating sanding belt with separate geared motor for better sanding results- Oscillation can be switched on as required- Abrasion-resistant and highly gliding plastic tracks on the work table surface- Sanding soleplate with graphite coating for a longer service life of the sanding belt- The spring-loaded belt tension automatically compensates for belt length differences- Rubberized and grooved sanding drum- Convenient operation from two sides on the rotating control panel above the machine- Centrally positioned holder for feed unitTechnical data:Dimensions and weightsLength (product): approx.1820mmWidth/depth (product): approx.1050mmHeight (product): approx.1470mmWeight (net): approx.400kgDrive powerPower oscillation motor: 0.38kWSuction connectionSuction nozzle diameter: 150mmWork table(s)Work table length: 1000mmWork table width: 280mmTable swivel: 45 / 35°Electrical dataSupply voltage: 400VMains frequency: 50HzSanding unitSanding belt length: 2640mmSanding belt width: 150mmBelt speed(s): 14m/sOscillation stroke: 20mmSanding surface length: 890mmSanding surface width: 150mmSanding height max.150mmScope of delivery:1x edge sanding machine KSO 150 M F 3 PRO1x sanding belt K1005x rubber rollers Ø25, Ø30, Ø40, Ø45, Ø50 mm6x sanding sleeves K80 - Ø25, Ø30, Ø35, Ø40, Ø45, Ø50 mmon-board toolmitre fence Ffjdpfxevwfa Sj Abueu

Condition: new, Year of construction: 2023, Stock saleYear of construction 2023Description:- Sanding unit can be swivelled by hand crank- The machine stand made of welded steel guarantees high torsional rigidity and vibration-free working- Oscillating sanding belt with separate gear motor for better sanding results- Oscillation can be switched on as required- Sanding soleplate with graphite coating for a longer service life of the sanding belt- Height-adjustable sanding table to utilize the entire sanding belt width- Additional table with suction openings for sanding radii on the rubberized deflection roller- Sanding sleeve device with attachable work table- The spring-loaded belt tension automatically compensates for belt length differences- With adjustable stops, ideal for veneer sanding- The grooved veneer stop allows the veneer overhangTECHNICAL DATADimensions and weightsLength (product) approx. 1700 mmWidth/depth (product) approx. 1000 mmHeight (product) approx. 1150 mmWeight (net) approx. 300 kgDrive powerPower oscillation motor 0,11 kWSuction connectionSuction nozzle diameter 2 x 100 mmWork table(s)Work table length 950 mmWork table width 450 mmWork table height adjustment 110 mmElectrical dataSupply voltage 400 VMains frequency 50 HzSanding unitSanding belt length 2640 mmSanding belt width 150 mmBelt speed(s) 14 m/sOscillation stroke 15 mmSanding surface length 800 mmSanding surface width 150 mmSwivel sanding unit 0 - 45°SCOPE OF DELIVERY1x sanding belt K1005x rubber rollers Ø25, Ø30, Ø40, Ø45, Ø50 mm6x sanding sleeves K80 - Ø25, Ø30, Ø35, Ø40, Ø45, Ø50 mmtool kitmitre fence Fsdpfxovwfxbo Abujfu

Condition: used, Year of construction: 1988, used, good conditionmanufactured by Brandttype F10 + EK 11 - trimmingbuilt in 1988Masch.-No. 0-260-01-2188/0-260-01-2746required space ca. 1100 mm x 1100 mm x 1700 mmlocated in 97447 Gerolzhofen, free on truck, unpackedsale in current condition as seen,without revision,without guarantee and warranty Fodpfovwf Txox Abuefu

Condition: new, Technical data:Rated voltage 230 VRated input 3050 WEdge height 10 - 65 mmSwiveling range 0 - 50 °Edge thickness 0.4 - 3.0 mmHeating time 30 sTemperature max. 520 degrees CelsiusFeed stepless 1 - 5.5 m/minDimension (L x W x H) 220 x 160 x 360 mmConnection compressed air 6 - 10 barInner radius min. 10 mmWeight 10.8 kg Ffjdpjwi Nt Esfx Abuju

Condition: new, Year of construction: 2022, Sale from stockYear of construction 2022Description:- Sanding unit can be swiveled by handwheel- The machine stand made of welded steel guarantees high torsional rigidity and vibration-free working- Oscillating sanding belt with separate gear motor for better sanding results- Oscillation can be switched on as required- Sanding soleplate with graphite coating for a longer service life of the sanding belt- Height-adjustable sanding table for utilizing the entire sanding belt width- Additional table with suction openings for sanding radii on the rubberized deflection roller- Sanding sleeve device with attachable work table- The spring-loaded belt tension automatically compensates for belt length differencesTECHNICAL DATADimensions and weightsLength (product) approx. 1700 mmWidth/depth (product) approx.1 000 mmHeight (product) approx. 1150 mmWeight (net) approx. 250 kgDrive powerPower oscillation motor 0,11 kWSuction connectionSuction nozzle diameter 2 x 100 mmWork table(s)Work table length 900 mmWork table width 360 mmWork table height adjustment 110 mmElectrical dataSupply voltage 400 VMains frequency 50 HzSanding unitSanding belt length 2580 mmSanding belt width 150 mmBelt speed(s) 14 m/sOscillation stroke 15 mmSanding surface length 800 mmSanding surface width 150 mmSanding height max. 150 mmSwivel sanding unit 0 - 90°SCOPE OF SUPPLY1x sanding belt K1005x rubber rollers Ø25, Ø30, Ø40, Ø45, Ø50 mm6x sanding sleeves K80 - Ø25, Ø30, Ø35, Ø40, Ø45, Ø50 mmOn-board toolMitre fence Fjdpfx Abovwfkqsuefu

Condition: used, Year of construction: 1993, with prejoiningused, good conditionmake Otttype Kantomat 156- FÜyear 1993glue thickness 15 mmworkpiece height min 10 mm max 60 mmworkpiece width min 60 mmworkpiece length min 60/160 mmthick edges up to 3 mmcaps from the roll up to 3 mmprejoiningcross-cutting unit K 14 / 2 x 1,1 PSflush milling HF15.1 2 x 1,5 PSChamfer 082 2 x 0,8 PS 0-45° swivelingRadius milling 2 x 0,8 PSRadius scraper controlled pneumaticBuffing oscillating pneum. with pneum. feed 2 x 0,3 HPautom. edge magazinefeed speed steplessgranulate quick heating basinsound insulation hoodlarge roller supportsuction connection D 160 mmspace requirement approx. 7400 mm x 1000 mm x 1600 mmtotal connected load 22 kWstorage location 97447 Gerolzhofen, free loaded, unpackeddelivery in as-is condition as viewed,without guarantee and warranty Fodpovwfyfefx Abusfu

Condition: used, Year of construction: 1987, Edge and profile sanding machine with new feed beltused, great condition, little used, top equipmentMake ArminiusType ST-4Year of construction 1987Machine no. 1948Belt feed with top pressure rollers and support roller conveyorapplication-controlled sanding pad that can be exchanged for a profile sanding bodyProfile grinding spindle with infinitely variable speed controlGrinding spindle 28 x 90 mm1.5 kW / max. 1,500 plessWorkpiece passage height 0-100 mmMotor 1.5kWMotorized oscillation 0.02 kWVeneer edge grinding device with controlled shoefront table approx. 500 mm x 1350 mmUnit tiltable 0-90°Belt length 1600 mmBand width 150 mmBelt speeds infinitely variablemobilemiter gaugeRound edge grinding deviceInfinitely variable feed system - belt feed with top pressure 5-25 m/e tiltable 0-90°New price approx. €25,000.00Suction connection 100 mmSpace requirement approx. 1350 mm x 930 mm x 1100 mmWeight approx. 280 kgStorage location 97447 Gerolzhofen, freely loaded, unpackedHandover in the current condition as seenWithout guarantee and guarantee Ffsdpevwfx Ijfx Abuou

Condition: new, - new -- The edge sanding machine type SK-1 is perfect for sandinglarge, curved and straight workpiece edges.- The main application area of the SK 1 is the sanding of radii andshaped parts.- The sanding unit with its radii of 80 mm, 300 mm and1000 mm also has a straight sanding surface available.- The pneumatic, infinitely height-adjustable oscillation andthe heavy cast iron sanding unit ensure completesanding belt utilization and precise sanding results.- The generously designed revolving work table with itsintegrated extraction system enables the user to work easily andergonomically.- The SK-1 is equipped with pneumatic unit oscillationand pneumatic belt tensioningTechnical data:Motor power: 4 kWBelt speed: 15 m/illation stroke: 30-150 mmBelt length: 2700 mmBelt width: 150 mmTable size: 2000 × 1000 mmSpace requirement: 3000 × 1500 mmSuction: 1 x 140 mmWeight: approx. 560 kgArt. 1020-200000 Fedpfx Aovyupuebusfu

Condition: used, Year of construction: 1994, for pre-coated edges including a lot of edge material with outriggers on both sides end cap station 3-roller feed Fedpfx Ajvwfzvjbuofu used, good condition Make Hebrock Type AKV-83 Year of construction 1994 Edge band thickness 1.0 mm Workpiece height max. 50 mm Workpiece width min. 50 mm Workpiece length min. 170 mm Space requirement approx. 1700 mm x 690 mm x 500 mm Storage location 97447 Gerolzhofen, freely loaded, unpacked Handover in the current condition as seen, without guarantee and guarantee

Condition: used, Year of construction: 2007, with feed unit for molded parts with hot melt adhesive specification used, good condition make Artech-Biesse type Single year of manufacture 2007 machine no. 91009 CE type-tested edge thickness 0.4 - 3.0 mm workpiece height min 10 max 120 mm space requirement approx. 1400 mm x 1000 mm x 1600 mm weight approx. 320 kg total connected load 5.2 kW storage location 97447 Gerolzhofen, free loading, unpacked Ffsdpfxovwgizj Abueu handed over in the current condition as viewed, without guarantee and warranty

Condition: used, Used, good condition Ffsdjwkvxwjpfx Abusu Brand Wegoma Type KS2250 GS wood dust tested Motor 2.25 kW Oscillation Front table approx. 620 mm x 220 mm Unit tiltable 0-90° Belt length 2250 mm x 150 mm Belt width 150 mm Belt speed 20 m/sec. Miter stop Round edge sanding device Extraction connection D 120 mm Space required approx. 1250 mm x 800 mm x 1200 mm Weight approx. 100 kg Storage location 97447 Gerolzhofen, free on load, unpacked Handed over in the current condition as seen, without guarantee or warranty

Condition: excellent (used), Year of construction: 2001, Langzauner edge sander EK 3/4 top condition Accessories: some abrasives still available Veneer stop jaws Table width: 350 mm Table length: 1,000 mm Maximum sanding belt width: 150 mm Sanding belt length: 3,000 mm Belt speed: 22 m/s Main motor: 2.2 kW Motorized feed Fsdovr Hw Ispfx Abusfu Veneer sanding Circular sanding support Oscillation Height adjustment: table, manual Sanding belt pivotable: Yes Conformity marking: CE mark Total connection: 4.6 kW Space required: Length: 1.7 m Width: 0.85 m Height: 0.9 m Location: from stock 54634 Bitburg - immediately available -