Used Edge Trimmer for sale (3,965)

Year of construction: 2009, operating hours: 11,720 h, condition: used, functionality: fully functional, machine/vehicle number: 2008/065, 1 thread grinding support, 1 water groove support, 7 face grinding supports, 3 upper chamfers, 3 lower chamfers, table extension console, belt running direction from right to left. Ihodpfew Exx Aox Abvew

Condition: used, Edgebander Robland 575 Pre-milling cutters Glue application by roller Pneumatic pre-cut guillotine Pressure rollers Finishing trimming saws Milling unit top-bottom R1 – R2 Flat scraper Machine length with table: 250 cm Feed speed: 5.5 m/min Max edge thickness: 2 mm Iodpfx Abeyt Ic Ssvehw Total installed power: 6.8 kW Extraction ports: 1x 80 mm, 1x 60 mm, and 1x 120 mm Machine in good condition, operates flawlessly. Possibility of inspection prior to purchase.

Condition: excellent (used), Robland KM 550 Edge Bander Glue application with roller Pneumatic pre-cut guillotine Iedpfx Asyt Hu Hobvohw Pressure rollers Final trimming saws Top and bottom milling unit R1 – R2 Flat scraper Machine length with table: 210 cm Feed speed: 5.5 m/min Max edge thickness: 2 mm Max panel thickness: 40 mm Weight: approx. 450 kg Machine in very good condition, operates flawlessly. Inspection and test possible before purchase.

Condition: good (used), Year of construction: 2017, NUMERICALLY CONTROLLED EDGE BANDER WITH PRE-MILLING (SPINDLES) & CORNER ROUNDING UNIT Brand: SCM Model: K 360 HP-T-ER1 Serial No.: AH/120944 Ref: 123304 Year: 2017 WORKING CAPACITIES: - Panel height to be machined: 8 - 58 mm Thickness 10 to 45 mm when using rounding unit - Panel length for edgebanding: 210 to 2500 mm - Minimum panel width to be machined: 90 to 1100 mm - Edge thickness in coil: 0.4 to 3 mm without rounding max 3 mm with rounding unit - Edge thickness in strips: max 6 mm without rounding max 3 mm with rounding unit - Edge width: panel thickness + 2 mm each side - Feed rate: 11 m/min - Minimum gap between panels: 600 mm - Panel overhang beyond the transfer chain: 30 mm MACHINE CONFIGURATION: - StarTouch control - Prepared for barcode reader - Reel holder table Ø800 mm - Front extension table - Easy size: digital positioning of infeed fence and panel passage height - Anti-adhesive spray unit - Pre-milling unit (RT-V trimmer) 12,000 RPM - Infrared panel preheating at infeed - Glue application unit (VC-VM) with interchangeable glue pot for granules, capacity: 1 kg. Heating time: 12 minutes Pneumatic pre-cut guillotine Digitally positioned pressure station with 3 rollers (1 roller powered and with timer) - Trimming unit (end cutting) tiltable 0-20° 12,000 RPM - Top/bottom flush trimming unit with digital positioning and copying system. 2 mm radius (or chamfer) router 12,000 RPM - Corner rounding unit R2 mm, 12,000 RPM, digital positioning - Top/bottom R1 & R2 mm radius scrapers with digital positioning Ihodpfxsrx S Ips Abvjw - Top/bottom straight scrapers - Edge finishing spray device (Nebulizer) OTHER FEATURES: - Pre-milling group motors: 2x2 kW - End trimming motors: 2x 0.19 kW - Lift/lower motor: 0.30 kW - Feed motor: 1.1 kW - Flush trimming group motors (milling): 2x 0.65 kW - CE Marked - Lockable isolator, emergency stop buttons - Power supply: 380 V, three-phase, 50 Hz - Pneumatic supply: 8-10 bar max, dry air - Extraction: 1x Ø100 mm and 5x Ø80 mm Spindles: 780 m³/h Edge trimming: 360 m³/h Scrapers: 2x360 m³/h Max. footprint in working order: 10.80 x 2.40 m Dimensions for transport (LxWxH): 4.85 x 1.20 x 1.70 m Weight: 1568 kg Machine supplied with mounted tools, manual, spare parts list and diagrams.

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Edge Control control system with 18.5" touchscreen color monitor 16:9 Swiveling operator panel, Program storage, Motorized pressure bar adjustment, Feed via transport chain, Feed speed: 8-18 m/min Extendable workpiece support, Infeed fence with motorized adjustment Jointing unit 1961, Diamond jointing cutter for climb and counter rotation, Automatic adjustment to workpiece height Edge feed 1903 Pre-trimming up to 3 x 45 mm (depending on material) Glue application system 1905 Multi-System Automatic glue height adjustment with sensor nozzle, Pressure regulator for adjusting the cartridge contact pressure, Use of PUR adhesives possible, Pressure unit 1913 MOT, First roller driven End trimming unit 1918 with pneumatic adjustment End trim saw pneumatically swiveling, Multifunction unit 1824 MOT 4 with multifunction cutter radii 1,2,3 mm Corner copying unit 1832 Corner copying up to 3 mm edge thickness Radius scraper 1929 MOT 2 With motorized adjustment of horizontal tracing rollers With pneumatic adjustment (top and bottom separate) Chip collection box for radius scraper, Surfacing scraper 1964 For removing glue residue for a clean glue line Ihjdpfsv Sv Enox Abvow With extraction hoods Spray unit 1856 for infeed and outfeed area Buffing unit 1940 For finishing and edge polishing ----- Technical Data ----- Edge thickness roll material: 3 mm, Edge thickness strip material: 8 mm, Max edge thickness for corner copying: 3 mm, Workpiece thickness: 45 mm, Workpiece thickness for corner copying: 45 mm, Min. workpiece length: 180 mm, Feed speed: 8-18 m/min, Distance workpiece support: 470 mm, Support table diameter for edge material: 800 mm, End cut knife for coiled material up to: 3 mm, Heating time: 3.5 min, Jointing unit power: 2 x 2 kW, End trim saw power: 2 x 0.22 kW, Milling station power: 2 x 0.35 kW, Corner copying power: 0.22 kW, Extraction port jointing unit: 120 mm, Extraction port milling unit: 70 mm, Extraction port scraper unit: 70 mm, Total length: 5,350 mm, Dimensions (LxWxH): 5,350 x 1,669 x 1,940 mm Picture of operating hours taken from a recording in 2022 Availability: short term Location: Röllbach

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 17000-21007552412, input voltage: 230 V, laser power: 30 W, Only 2 years of test operation – climate-controlled residential environment – no exposure to dust or workshop conditions The Epilog Fusion Edge 12 on offer is a professional CO₂ laser system designed for precise engraving and cutting applications in continuous operation. This unit was used exclusively for testing and development purposes over a period of just two years and was always located in a climate-controlled residential space. It has never been in a workshop environment, nor exposed to dust, thermal stress, or dirt, resulting in an almost factory-new condition. Ihjdpfxjyqxnge Abvew The machine has been maintained regularly by cameo Laser and is ready for immediate use. Inspection and a full functionality test are available at any time. Technical Specifications: - Model: Epilog Fusion Edge 12 - Laser Source: 30 W CO₂ "WaveGuide" - Working Area: 610 × 305 mm - Maximum Engraving Speed: 3 m/s (5G) - Maximum Material Height: 178 mm - IRIS™ Camera Positioning System - Autofocus + 2" Focusing Lens - Red Pilot Laser - Honeycomb Cutting Table - LED Interior Lighting - Large Safety Glass Viewing Window - Air Assist incl. Compressor - Laser Class: 2 - Connections: USB, Ethernet, Wi-Fi - Touchscreen + Joystick Control - 1 GB Internal Memory - SAFEGUARD Mechanical Protection - Mobile thanks to integrated castors Vacuum Extraction System vacuair UML 340 edge (included) Recirculating Air Base Unit: - 3-stage filtration (HEPA H14, pre-filter, 15 kg activated carbon) - Airflow: 340 m³/h - Separation Efficiency: >99% - Serial Number: 50138217001 - Very quiet operation – ideal for indoor spaces Accessories & Documentation: - Air Assist Compressor - Camera Calibration Plate - Cleaning and Maintenance Accessories - Fusion Edge Software (CD) - Printed User Manual - Original Invoice (Initial value: €22,105.98) Condition & Usage History: - Only 2 years of test operation - Used exclusively in a climate-controlled residential environment - No exposure to dust, dirt, or workshop conditions - Very low operating hours - Regularly serviced - Excellent optical and technical condition, almost as new - Ready for immediate use

Year of construction: 1990, condition: ready for operation (used), Multi-edge milling machine for 2 - 4 - 6 edge milling on manual or CNC milling machines Manufacturer WITTE Type: MKF 1001, year 1990. For milling spindle ISO 40 Working range: SW 2 - SW 30 Length: 75 mm Spindle passage: 25 mm Weight approx. 25 kg. Operating instructions available. Ijdpfx Asvmglzobvshw

Condition: used, Year of construction: 2010, Used machine Year of manufacture 2010 With joining unit and corner rounding unit Control panel with LCD display and keypad Joining unit with 2 counter-rotating diamond cutters With edge feeder for roll and strip material Ihjdew I H Rkepfx Abvew With glue roller and glue unit With pre-trimming from the roll With pressure unit With trimming unit with pulling trimming cut With flush and radius trimming unit Corner rounding unit for front edges Manual unit adjustment Edge thickness 0.4-5 mm Workpiece height 8-60 mm Min. workpiece width 70 mm Min. workpiece length 140 mm Feed speed 11 m/min With radius scraper unit With flat scraper With polishing unit Extendable workpiece support Extraction connection 120 + 2 x 80 mm Weight approx. 990 kg L x W x H 4550 x 1550 x 1100 mm Availability: Short-term Storage location: Flörsheim

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, cutting height (max.): 160 mm, cutting width (max.): 700 mm, height adjustment type: mechanical, total length: 17,000 mm, total width: 2,500 mm, total height: 1,000 mm, saw drive: 31,000 W, Double-edge circular saw with conveyor rollers from Paul Type: PKAH Year of manufacture: 1989 Iedpfxjwa T Dcs Abvshw 5-meter driven conveyor rollers 2 x 5-meter non-driven conveyor rollers With side-mounted board removal belt Total L x W x H: 17 x 2.5 x 1 meter Boards up to 70 cm wide and 16 cm thick can be edged. Width electrically adjustable. Height mechanically adjustable. 400 V Max. 63 A 31 kW Please contact us if you are interested or have any questions.

Condition: new, Edge and contour milling machine Make: Assfalg Model: KKE 1 condition: new machine Speed: 8.000 - 24.000 rpm (infinitely variable) max. bevel width: 3 mm serially equipped with: - Guide rail - wrenches, open-end wrenches - Insert ring Ø 30 x 8 mm - Collet Ø 6 mm with union nut - Operating instructions Ihjdebhfzbepfx Abvew

Condition: new, Deburring machine brand: Aboagye Model: AF 165 Condition: new machine Ihedpfx Aodurxnebvsw Speed: 2,800 RPM maximum cutting width: 1 mm equipped as standard with: -Special flap disc K80-ST -Suction nozzle -Manual

Condition: good (used), Year of construction: 2006, functionality: fully functional, PRAWEMA 2005 204 HS-W PRAWEMA 2006 SYNCHROFINE 205 HS Iedpfsvm Efasx Abvohw

Year of construction: 2011, condition: used, functionality: fully functional, • Band running direction: LEFT to RIGHT, year 2011 #2010037 • 10 face grinding supports, 130 & 150 mm, with vertical oscillation Ihodpfsyruvcex Abvow • Horizontal oscillation for material thicknesses up to 100 mm • 1 lower & 1 upper chamfer milling support • 2 pneumatic lower & 2 upper chamfer supports • Belt infeed: motorised calibration/profile support • Belt outfeed: motorised drip rail support • Table widening console • Space requirement approx.: 725 x 180 cm

Condition: ready for operation (used), Year of construction: 2011, machine/vehicle number: 0-200-07-9819, Type: KAL210 / EDITION Machine no.: 0-200-07-9819 Year: 2011 Single-sided machine for machining straight workpiece edges. Edge banding and post-processing of various edge banding materials, in through feed lengthwise and crosswise. POWER CONTROL control PC22 Control system Windows PC Hardware: PLC control Integrated stretch control for contact-free control of the machining units Operating system Windows XP Industrial PC 10" TFT monitor with touch screen, selection and setting of all necessary production parameters, such as: program selection and workpiece thickness adjustment. PC keyboard and mouse USB connection Network connection Remote control Setting operation, start feed, emergency stop switch Unit equipment: -Release agent application unit Ihedpfx Absyn Ilpsvsw -Joint milling unit -Glue unit A20 with 2 rollers -Cutting unit HL84 -Pre-milling unit -Shape milling unit FF32 -Universal milling unit UF10 -Profile sanding unit PN10 -Finishing unit (glue joint sanding unit + polishing brushes) Technical data Minimum workpiece width: for thicknesses 12-22 mm, 60 mm for thicknesses 23-40 mm, 105 mm Workpiece overhang 30 mm Workpiece thickness 12-60 mm Molding material on roll 0.3-3 mm Molding cross-section max: For PVC 135 mm2 For veneer 100 mm2 Molding material strips 0.4-20 mm Edge cross-section for strips 900 mm2 Working height 950 mm Pneumatics 6 bar Power 400 volts, 50 Hz, 3-phase NOTE Subject to incorrectly published technical data.

Condition: excellent (used), CATALOG NUMBER: 7404 TECHNICAL DATA - Minimum workpiece thickness: 16mm - Maximum workpiece thickness: 60mm - Height to table surface: 920mm - Motor power: 1.2kW Ijdpeymd Scefx Abvjhw - Voltage: 400V - Disc – guillotine – feed rollers for tape – glue tank – 3 guide rollers (first one is the drive roller) - Worktable: 1600x670mm - Dimensions (L/W/H): 1600x1400x1100mm - Weight: 170kg ADVANTAGES – Polish manufacture – Suitable for edging both straight and curved edges – Used machine, in very good condition Net price: 5,900 PLN Net price: 1,400 EUR (based on 4.2 PLN/EUR exchange rate) (Prices may change with significant fluctuations)

Condition: good (used), Year of construction: 2007, functionality: fully functional, 10 cup wheels vertiocal glass edging machine glass thikness : 3 - 30 mm min. glass size : 50 x 50 mm max. glass weight : 1000 kg working height : 812 mm total power : 16,3 Kw water tank capacity : 422 L working speed : 0,5 - 5,5 m/min. weight : 2890 kg The machine has worked with a flocculant . Iedpfxoyhpqas Abvohw

Condition: used, TECHNICAL SPECIFICATIONS: – Length of feed rollers: 7800 mm – Roller width: 1430 mm – Roller diameter: 110 mm – Destacking system – Stacker width: 1540 mm – Package depth: 1430 mm – Package height: 1830 mm – Element collection with chains: 1600 mm x 1600 mm – Return of crossbars via belt conveyor: 3000 mm Ihjdpfx Asymd I Debvjw – Crossbar stacking up to 1370 mm at lifting height 1700 mm – Total length: 12 m

Condition: used, Year of construction: 2005, Three knife trimmer Kolbus HD 150.B Year: 2005 Description: Ihedpfx Ajvf Dtyobvew - Right hand infeed - Automatic hopper feeder for inline production - Cut counter - Exchangeable cutting tables (standard set) - Knife pre-setting device - Set of knife holders: 2 - Sets of knives: 2

Condition: used, Year of construction: 2018, total height: 1,600 mm, total length: 5,370 mm, total width: 1,020 mm, - Year: 2018 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 18421 - Transport dimensions: 5370mm x 1020mm x 1600mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Ihodpjxyy Ryofx Abvew Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, Year of construction: 2025, The KANTENKING is the most favorable edge processing solution for creating the zero joint for the trades with feed speeds from 10m / min, as well as in the industrial sector, with high speeds up to 22 m/min. The Kantenking HTK3030 has a speed of max. 22 m/min.. Your edge edger is still "in good condition", but you have already heard a lot about the null joint and ask yourself, if this is also suitable for you. You can retrofit the HOT-AIR system in any existing edge banding or BAZ. The Hot-Air-System has low maintenance and reliable. You tell us your wishes and machine data. So we can together with you and your ideas make an offer for the optimal product. Feed speeds up to 22 m/min. are possible. The Hot-Air-System is optimally integrated in your edge banding or machining center. Please don't hesitate to contact us. Ijdjd Dczzopfx Abvohw

Year of construction: 2007, condition: ready for operation (used), This HOMAG WEEKE industrial production line was manufactured in 2007. It features a comprehensive setup for high-volume panel processing and edge-banding, including automatic loading systems, a central roller conveyor, multiple edge-banding modules, and a portal manipulator for stacking. Ideal for streamlined wood production, ensuring efficient handling and precision. Consider the opportunity to buy this HOMAG WEEKE industrial production line. Contact us for more information about this machine. Application Types Iedjx D Dq Sspfx Abvehw Complete Production

Condition: good (used), Leonhard Kurz Model H Book Edge Gilding Machine This machine is in very good condition and ready to use. Ihsdpfoyrz S Dsx Abvsw This machine is from the popular Leonhard Kurz manufacturer, manufactured in Germany. Description This edge gilder is suitable for books, cards, invitations, and business cards. Hand-operated clamp, powered by only 230V. A powerful clamp with adjustable pressure ensures repeatability. The machine features a convenient material clamp, depth adjustment, and a convenient base with wheels. Specifications: Mechanical clamping mechanism Power consumption: 170W Power supply: 230V Machine weight: 80kg

Condition: good (used), Duplo DBM 150 Booklet Maker with Trimmer This machine is in very good condition, the latest booklet maker from Duplo. Made in Japan, 2019. Controlled via a control panel. Perfect condition. The Duplo DBM-150/150T is an automatic booklet maker and front trimmer, providing a compact set for booklet production. Ideal for service shops, small digital print shops, and reprographic studios. Maximum size: 320 x 460 mm Minimum size: 120 x 210 mm Iodpfxoyrz Sks Abvjhw Paper weight: 64-300 g/m² Speed: 2,400 booklets/hour Weight: 137 kg

Condition: like new (used), Year of construction: 2019, Demonstration machine in as-new condition. See documentation. New PHT: €21,000.00; front: €11,800.00. Iodpfoyk T Ibox Abvshw

Condition: used, sanding belt measurements 2.260 x 150 mm Motor output 1,5 kW Ijdpjwffpbsfx Abvehw table: schwenkbar Dust suction hood 100 mm