Used Electrostatic Precipitator for sale (129)

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, heating capacity: 1,600 kW (2,175.39 HP), Equipment: documentation/manual, hot water, Polzenith Heating Boiler 1.6 MW, year of manufacture 2007 Very well-maintained combustion system by Polzenith with a heating capacity of 1.6 MW. Complete system including: - Fuel storage. Steel construction with walking floor - Scraper conveyor - Beth electrostatic precipitator with electrical cabinet - Chimney approx. 12 m high - All flue gas lines Gjdpew Nrr Nsfx Ab Uskf - Complete with control panel and hydraulic unit System has been professionally dismantled and is immediately ready for loading.

Condition: excellent (used), Year of construction: 2013, SAACKE CNC grinding center model UW I F with 5 controlled axes X, Y, Z, A + B and fully automatic grinding wheel changer NUM Axium Power control with PC Electrostatic oil mist separator Accessories: GS filter system RBAFWT 113 stationary with coolant filtration for attachment to a CNC grinding machine SAACKE Büchele filter system Software extension for multi-spiral for cylindrical milling cutters without face, with flat face or corner chamfer with up to 12 different spiral angles Gsdpjv Ef Ekefx Ab Uekf

Condition: repair required (used), Year of construction: 2014, functionality: not functional, machine/vehicle number: 67137, Technical characteristics: Work Area - Maximum clamping plate diameter: 250 mm - Maximum turning diameter: 250 mm - Maximum machining diameter: 220 mm - Maximum workpiece length: 200 mm - X-axis travel: 886 mm / Rapid traverse X: 60 m/min - Z-axis travel: 250 mm / Rapid traverse Z: 30 m/min - Y-axis travel: -85/+100 mm / Rapid traverse Y: 30 m/min - Standard closed automation (number of loading stations by workpiece diameter): 14/(80...200), 18/(30...160), 30/(30...85) Main Spindle - Spindle (Weiss) per DIN 55026: Size A6 - Maximum speed: 5,500 rpm - Power at 100% duty cycle: 38 kW - Torque at 100% duty cycle: 300 Nm Secondary Spindle HSK63 - Spindle head size/type: HSK-A63 - Nominal speed: 2,700 rpm / Nominal power: 12 kW / Nominal torque: 42.4 Nm - Maximum speed: 15,000 rpm - Power at 100% duty cycle: 38 kW - Torque at 100% duty cycle: 300 Nm Tool Holder with Motorized Tools - Turret VDI40, Siemens-drive 0.5.440.220 (manufacturer: Sauter) - Number of stations: 12 - Live tool nominal speed: 3,000 rpm / Nominal torque: 33.1 Nm - Live tool maximum speed: 10,000 rpm / Nominal torque: 56.2 Nm - Live tool nominal power at 100% duty cycle: 10.4 kW Electrical Equipment - Operating voltage: 400 V, fused 100A GL - Connected load: 45 kW Dimensions - Overall dimensions: Length = 4,021 mm, Width = 4,709 mm, Height = 3,527 mm - Weight: 8,000 kg Main Features and Capabilities: - Vertical design for optimal chip evacuation and easy loading/unloading - Control system: Siemens 840D SL - High precision with Heidenhain linear scales for X, Y, Z axes - High-power main spindle (Weiss) with a wide speed range - High-power secondary spindle (Weiss), easily accessible for drilling/milling operations - Automated loading/unloading via integrated automation - In-process control probe: Marposs T25 - Live tooling for extended machining capabilities (drilling, milling, etc.) Gkjdpfx Aexxi Urjb Uef - Chip conveyor: Knoll - Coolant 'paper' filter unit & chiller: Knoll KF150/500 - Electrostatic mist filter: IFS type IFM1000 Machine status: NOT WORKING - Sauter turret replaced with new unit; assembly not complete – turret motor spindle installation still required - Operator panel safety switch needs replacement

Condition: new, Year of construction: 2023, There are 3 Sets of Coating System subjected to this listing; Details; 1- 2023 Wagner liquid coating system consist of; -2 pcs Isolate paint supply set Each consisting of: 1- 1 pc Isolated table approx. dimensions 3200x1000x1900 h. mm. • Standard grounding system • 2 Electric locks, one for paint supply access door and one for the spray booth access door complete with electric wiring • Lamp red / green for electrostatic on / off status 2- 3 pcs Wagner Pneumatic elevator for 25l drum covers complete with: stainless steel cover with inspection hole and suction pipe pneumatic agitator rotation block when in high position 3- 4 pcs Wagner double diaphragm pump, mod. DD10 (4 for paint and 1 for water) pressure ratio 1:1, complete with: pressure regulator and gauge for the motor feeding air fluid filter group suction hose for 25 l drum cover (for paint) suction hose for 25 lt drums (for cleaning water) 4- 1 pc flusching pressure tank for CUP BELL -2 pcs Reciprocator mod. VU 1-2700mm stroke • High stability: solid mechanical construction with light weight, but robust • design thanks to the aluminum sections and an high precision linear • guide with cage for wheels. • Sturdy: can handle up to 49kg • High safety: completely suitable for use in explosive areas EX II 3G • Simple and intuitive maintenance of the toothed belt which guarantees a • long service life • Powerful: stroke speeds from 7 up to 80m/min and • acceleration up to 6m/s • stroke speed variantion along the stroke • Electric Motor protection cover • Sliding base 600mm with electric engine to move automatically back and forth the reciprocator • Isolated mounting brackets • High stability: solid mechanical construction with light weight, but robust • design thanks to the aluminum sections and an high precision linear • guide with cage for wheels. • Sturdy: can handle up to 49kg • High safety: completely suitable for use in explosive areas EX II 3G • Simple and intuitive maintenance of the toothed belt which guarantees a • long service life • Powerful: stroke speeds from 7 up to 80m/min and 2- 2023 Wagner Projekt Powder Supercube System -Booth Supercube with 2 slot eachside In sandwich PVC- Length 2.500 -Powder Suction and Seperation Cyclone and Filter 17.000 mc/h (16.000 + 1.000) Gsdpfxexcnk Te Ab Uekf -Powder Centre SUPERCUBE EVO with IP Pump with Container Ultra siewe included + extra container without siewe -Application Technology PROFITech With N*12 PEA-C4 XL automatic guns N*16 automatic guns PEA-C4 XL (8 on reciprocator1 + 8 on reciprocator2) Movement N*2 moving reciprocators with motorised moving bases. -N*2 electronic reciprocators with fences -N*2 electronic fast mobile bases for scanning pieces -N*1 Vertical and Horizontal Scanner reading system of pieces N*1 encoder for connecting conveyor to Touch panel N*1 Software 4.0 Data production with data management Powder Consumption Colour Change Time Stop Production counter -Two external platforms (2 x manuel PEMX1 guns) For more details please get in contact ...

Year of construction: 2001, condition: ready for operation (used), Working width: 2200mm, number of fields: 6, with Three-Roller Foulard Beta, straightening unit Mahlo, weft unit Mahlo Movicat for punching basis weight samples, turret winder Brückner, heat recovery in the exhaust air 1x air/air stage and 1x air/water stage and electrostatic filter for cleaning the exhaust air. Gjdpfxopy Eufe Ab Uokf

Condition: used, TECHNICAL DETAILS - distance between centers : 200 [mm] - centers height : 100 [mm] - strokes (X/Z) : 130 / 170 [mm] WHEELHEAD - grinding wheels dimensions : 400 x 63 x 127 [mm] - peripheral speed : 45 [m/sec] - power : 3 [kW] - positioned at : 30 [°] WORKPIECEHEAD - type of cone: MT4 - speeds : 600 - 3000 [rpm] - power : 0,5 [kW] - C axis indexing precision : +/- 0,5 [°] TAILSTOCK - type of cone : CM2 - quill stroke : 30 [mm] ELECTRICAL SUPPLY - voltage : 400 [V] - frequency : 50 [Hz] - installed power : 19 [kVA] DIMENSIONS - floor space : 1760 x 2180 [mm] - height : 2630 [mm] - weight : 4.000 [kg] HOURS - under power : 46.943 [h] - working hours : 21.529 [h] EQUIPMENT - CNC FANUC 16TB - soft options : Studer Release B, Pictogramming - interface : RS232C - electronic deported handwheel - direct measuring rules on axes X/Z Gkedsuhbxmepfx Ab Uof - tailstock with fine concentricity adjustment - tailstock pinole hydraulic recoil - swiveling dressing wheel upon table : FISCHER AES-72x230/3 - dynamic wheel balancing device : DITTEL HBA 4000 - prepared for diameter sensor : MOVOMATIC ES400 - prepared for parts loading/unloading robot : FELSOMAT - automatic front door - prepared for cooling - electrostatic aspiration : ELOSTA BF2000 - pneumatic collets chuck - 1 wheel-holder - 1 grinding wheel - support arm for zero gravity wheel change - 1 balancing shaft

Condition: excellent (used), The Thermo Scientific Heraeus Biofuge Primo R centrifuge enables high-throughput and low-throughput processing with optional rotors and accessories and a maximum speed of up to 15,000 rpm. This compact, high-performance refrigerated centrifuge provides efficient and flexible sample processing. The Primo R features automatic rotor recognition and unbalance detection with uniform temperature control. The Primo R is ideal for small medical laboratories, biochemical and molecular biology research, and routine analysis in industrial laboratories. Typical applications include sedimentation of cells (algae, yeast, bacteria, etc.), sedimentation of cell organelles and cell fragments, preparation of DNA samples and protein precipitates, blood and urine analysis, and centrifugation of standard test series in microliter tubes. This refrigerated centrifuge is equipped with a fixed angle and tiltable rotor. Technical specifications: Voltage: 220-240 V Current: 2.9 A Power: 490 W Maximum centrifuge speed: 15,000 rpm (adjustable in increments of 10) Minimum centrifuge speed: 300 rpm Maximum RFC Weight: 21855 g Temperature range: -9...40°C Noise level at maximum speed: < 60 dB Rotor recognition: automatic Unbalance recognition: electronic Safety features: lid lock and interlock Rotor specification 1: Number: 7591 Type: swinging bucket rotor Maximum speed: 4000 rpm Maximum RCF: 2585 g Maximum capacity: 4 x 100 mL Gkedpfx Abet Eva Is Uef

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Z-axis: 130 mm, total height: 2,750 mm, feed rate X-axis: 1 m/min, feed rate Y-axis: 1 m/min, feed rate Z-axis: 12 m/min, table width: 630 mm, table length: 770 mm, distance table to spindle center: 585 mm, type of input current: three-phase, table load: 500 kg, overall weight: 4,500 kg, travel distance W-axis: 500 mm, distance between stands: 750 mm, Equipment: documentation/manual, CNC JIG GRINDING MACHINE HAUSER S40-400 TECHNICAL CHARACTERISTICS : Stroke X axis: 650 [mm] Gkjdpfxewu Raks Ab Uef Max. Stroke speed X axis: 4000 [mm/min] Working feed X axis: 0 - 1800 [mm/min] Stroke Y axis: 450 [mm] Working feed Y axis: 0 - 1800 [mm/min] Stroke Z axis: 130 [mm] Min. Stroke speed Z axis: 0.5 [mm/min] Max. Stroke speed Z axis: 12000 [mm/min] Stroke frequency Z axis: max. 4 [Hz] Stroke W axis: 500 [mm] Planetary speed C axis: 5 - 250 [rpm] Max. Stroke speed W axis: 800 [mm/min] Stroke U axis (radial feed): 5.5 [mm] Distance between columns: 750 [mm] Table length: 770 [mm] Table width: 630 [mm] Clearance between grinding motor and table: 585 [mm] Max. load on table: 500 [Kg] Supply voltage: 400 [V] Weight: 4550 [Kg] ADDITIONAL INFORMATION : x1 HI-CUT pack including: -work area protection -exhaust system with electrostatic air filter -fire protection system (to be assessed by a qualified body) -HTG-RWS-60 automatic belt filter cooling unit x1 MSS (Multi-Sensoric System) tool detection device x1 CBN dressing unit with HF drive for automatic dressing of CBN grinding wheels (ceramic bond and synthetic resin) x1 T16 grinding turbine - speed: 160,000 rpm - reference: 164225 x1 turbine support with filter for use with T10 and T16 turbines - reference: 166497 x1 60S-TC grinding motor, speed 9000 - 60000 [rpm], for SK20 collets - part number: 208450 x1 intermediate plate for aligning motors and urbines - reference: 192940 x1 centring watch holder for grinding motor rotor - reference: 191790 x15 wheel holder cleats x1 cable for grinding motor Various tools Full documentation Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. The HAUSER S40-400 is a high-precision CNC coordinate grinding machine. This machine excels in tight tolerance environments such as contouring applications in the aerospace, automotive and medical industries. Thanks to its robust design and advanced capabilities, the HAUSER S40-400 is comparable to machines from well-known brands such as Moore. It can be integrated into workshops comprising Mägerle (Magerle), Studer, Moore, Kellenberger, Okamoto, Jones & Shipman, and ELB machines. In addition to its performance, the HAUSER S40-400 integrates perfectly into workshops equipped with lathes, machining centres or CNC milling machines, offering a complete solution for high-precision grinding and machining of complex parts.

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 46001, Technical characteristics: Work Area - Maximum clamping plate diameter: 220 mm - Maximum turning diameter: 170 mm - Maximum machining diameter: 170 mm Gkodpfsxw Ufysx Ab Uof - Maximum workpiece length: 100 mm - X-axis travel: 495 mm / X-axis rapid traverse: 48 m/min - Z-axis travel: 250 mm / Z-axis rapid traverse: 30 m/min - Standard enclosed automation (number of loading positions by workpiece diameter: 14/(80...200), 18/(30...160), 30/(30...85)) Main Spindle - Spindle (DIN 55026): Size A5 - Maximum speed: 7000 rpm - Power at 100% duty cycle: 23 kW - Torque at 100% duty cycle: 130 Nm Tool Turret with Driven Tools - Turret VDI40, Siemens drive 0.5.435.220, Manufacturer: Sauter - Number of stations: 12 - Maximum speed: 4000 rpm Electrical Equipment - Supply voltage: 400 V, 80A GL fuse protection - Connected load: 41 kW Dimensions - Total dimensions (L×W×H): 3913 × 2160 × 2955 mm - Weight: 6500 kg Main Features and Capabilities: - Vertical design: Optimal chip evacuation and easy loading/unloading - Control system: Siemens 840D SL - High precision: X and Z axis position accuracy via Heidenhain linear scales - Main spindle by Weiss: High power and broad speed range - Automated loading/unloading: Parts are loaded and unloaded via integrated automation - In-process control probe: Marposs T25 - Driven tools: Enables drilling and milling operations - Chip conveyor: Knoll - Coolant “paper” filtration & chiller unit: Knoll KF150/950 - Fire suppression system: Kraft&Bauer - Electrostatic mist collector: IF Vario EC1500 Machine status: - Working

Condition: excellent (used), Year of construction: 2019, UV ink printer, year of manufacture and installation 2019 - production Japan According to the attached counter capture - 1,551 operating hours and 37,000 sqm printed. Perfect working condition - equipment is in production and can be viewed / tested Working table and material dimensions: Fixed table with dimensions of 125 X 250 cm and payload of 34 KG; Maximum material thickness - 5,08 cm; High power vacuum system - 6 vacuum zones; 5 pneumatic guides. Minimum per support with guides 60X80 cm; Printing heads: 2 piezoelectric heads 636 nozzles per channel and variable drop between 6 and 42 picolitres; Maximum print area covered by the heads is 126 X 251 cm for edge to edge printing; Nozzle detection and compensation system; Automatic self-cleaning optional not mandatory. Number of colours : Digital Printer UV ink; 4 colours - CMYK (Cyan, Magenta, Yellow, Black) with the possibility to reactivate 6 colours white + transparent colourless lacquer. Resolution and Productivity : Maximum resolution 1440 dpi; Express speed - 58,7 mp/hour; Production speed - 35,7 mp/hour; Quality speed - 25,3 mp/hour; Quality speed 2 layers - 12,5 mp/hour; UV ink barrels - minimum 1 litre. Accuracy: Line thickness: Maximum error +/- 0.8 mm per 2.5 m side; Maximum error +/- 0.4 mm on 1.25 m side. Straightness: Maximum error +/- 0.7 mm on 2.5 m side; Maximum error +/- 0,5 mm on 1,25 m side. Diagonal error: Maximum error +/- 1,0 mm on 2,5 X 1,25 m. Other: Patented solution to achieve grey gradients; Stand/Working stand Ionizing bar (electrostatic discharge) Gkodpfx Abomcw S Sj Uef Special bridge for loading and moving equipment. EXW - old price 49.000 euro - new price 35.000 (without VAT in EU)

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 106882-11, total length: 4,400 mm, total width: 1,700 mm, total height: 2,700 mm, overall weight: 7,000 kg, The drilling process of the deep hole drilling machine utilizes the single-lip drilling method. Drilling Unit Information: - Drilling depth: 200 mm - Min./max. drilling diameter: 1–12 mm based on ST 60 - Number of spindles: 2 - Spindle distance: 200 mm - Spindle drive: 2 x 2.4/4.2 kW - Infinitely variable spindle speed: 1,000–20,000 rpm - Infinitely variable feed rate: 10–25,000 mm/min - Rapid traverse: 25,000 mm/min - Slide travel (nominal): 650 mm - Slide width: 460 mm - X-axis slide travel: 200 mm, rapid traverse: 25,000 mm/min - Y-axis slide travel: 200 mm, rapid traverse: 25,000 mm/min Fluid Information: - Coolant supply: deep hole drilling oil - Tank capacity: 500 liters - 1x automatic filter, filter performance: 50 l/min - 1x monitoring filter - 2x ELB drilling oil supply lines - 1x flow divider - 1x air cooler with recirculation pump - 1x electrostatic oil mist extraction unit - 1x scraper belt chip conveyor - 1x hydraulic unit and pneumatic unit/equipment - 1x sump pump - 3x submersible pumps - 1x radial piston pump with remote adjustment: Delivery rate: 1–38 l/min Gksdpfxswh Rp Ee Ab Uef Pump drive: 7.5 kW Spindle Unit: - Motorized spindles with frequency-controlled, infinitely variable speed regulation - Spindle head with connection for tool holder - 2 x tool holders for collet sleeves according to VDI 3208 SE10x60, permanently bolted to the spindle head of the motorized spindle Drill Bushing Carrier: - The drill bushing carrier is positionable via the NC axis - Cast iron design, mounted on linear guideways - W-axis drive via AC servomotor and ball screw with indirect, absolute position measurement system Workpiece Slide: - The workpiece slide is designed as a cross-slide for vertical and horizontal positioning of the workpiece, for mounting clamping plates or special fixtures - Base unit in cast iron design with linear roller guideways - X and Y axes driven by AC servomotors and ball screws - Direct, absolute position measurement systems. Table plate with clamping or alignment grooves Clamping Table with NC rotary indexing device for positioning: - With rotary and swivel axes - Hydraulic clamping in rotary and swivel axes Technical Data: - Swivel range: 270º - Rotary range: 360º - Center height: 25 ± 0.02 - Spindle distance: 200 ± 0.005 - Indexing accuracy: rotary axis ± 15" / swivel axis ± 30" Electrical Equipment Information: - 1x drilling process monitoring - 1x CNC control 840D (Solution Line) Connection Data: - Operating voltage: 3AC 400V ± 10% - Frequency: 50 Hz - Control voltage: 24 V DC - Total rated power: 25 kW Additional Machine Equipment: - 2 x holders for resilient drill bushing holders, arranged on the drill bushing carrier - For max. drilling Ø18 mm.

Condition: used, Year of construction: 2002, max. wheel diameter 275 mm max. module 6 min. module 1,5 Control SINUMERIK 840 C tooth width 5,5 mm spiral angle min. 0 / max. 60 ° max. number of teeth 120 min. number of teeth 5 ratio of transmission 1:10 min. ratio of transmission 1:1 work piece spindle speed max. 110 U/min blade head turning speeds 20 - 110 U/min total power requirement 100 kW weight of the machine ca. 16,7 t Godpfxevxwnwj Ab Uskf dimensions of the machine ca. 5,20 x 2,30 x 2,40 m Internal deburring device U axis / Q spindle chip conveyor coolant device Electrostatic air purifier ELBARON no tools No workpiece clamping device

Condition: used, Effluent plant for waste water treatment. Includes: - Mixing and equalisation tanks 1, 140 m3 - Mixing and equalisation tanks 2, 40 m3 - Mixing and equalisation tanks 3, 80 m3 - Bioreactor 1, 240 m3 - Bioreactor 2, 240 m3 - 2 air compressors for aeration in the reactors - Secondary sedimentation tank 1, 100 m3 - Secondary sedimentation tank 2, 100 m3 - Thin sludge tank, 70 m3 - Thick sludge tank, 90 m3 - Sludge dewatering 1 and 2 - Precipitant tank, 25 m3 - Various process water pumps Bioreactor capacity 2 x: 240 m3 Operation / Control: Siemens Simatic S7 Gjdpovcql Rsfx Ab Uekf Features: Mixing and equalisation tank 1, 2 & 3; Pumping station 1 - inlet bioreactor; pumping station 2 - inlet bioreactor; bioreactor 1; bioreactor 2; pumping station - outlet bioreactors; 2 x air compressor; Precipitant tank; filling unit; 2 x flocculent mixing station; secondary sedimentation tank 1 & 2; mixing tank; thin sludge tank; 2 x sludge dewatering; thick sludge tank

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 650 mm, travel distance Z-axis: 130 mm, feed rate X-axis: 1 m/min, feed rate Y-axis: 1 m/min, feed rate Z-axis: 12 m/min, table length: 770 mm, distance table to spindle center: 585 mm, type of input current: three-phase, table load: 500 kg, overall weight: 4,550 kg, travel distance W-axis: 500 mm, distance between stands: 750 mm, clearance between the columns: 750 mm, Equipment: documentation/manual, CNC Jig grinder HAUSER S 40 400 TECHNICAL CHARACTERISTICS : Stroke X axis : 650 [mm] Max. Stroke speed X axis : 4000 [mm/min] Working feed X axis : 0 - 1800 [mm/min] Stroke Y axis : 450 [mm] Working feed Y axis : 0 - 1800 [mm/min] Stroke Z axis : 130 [mm] Min. Stroke speed Z axis : 0.5 [mm/min] Max. Stroke speed Z axis : 12000 [mm/min] Stroke frequency Z axis : max. 4 [Hz] Stroke W axis : 500 [mm] Planetary speed C axis : 5 - 250 [rpm] Max. Stroke speed W axis : 800 [mm/min] Stroke U axis (radial feed) : 5.5 [mm] Distance between columns : 750 [mm] Table length : 770 [mm] Table width : 630 [mm] Clearance between grinding motor and table : 585 [mm] Max. load on table : 500 [Kg] Supply voltage : 400 [V] Weight : 4550 [Kg] EQUIPMENT INCLUDED: x1 HI-CUT pack including: -work area protection -exhaust system with electrostatic air filter -fire protection system (to be assessed by a qualified body) -automatic paper tape filtration unit x1 grinding motor 22 S, speed 4500 - 22500 [rpm], for EX23 collets - part number: 181561 x1 45 S grinding motor, speed 9000 - 4500 [rpm], for EX19 collets - reference: 144017 x1 80 S grinding motor, speed 40000 - 80000 [rpm], for F6 collets - reference: 144021 Gkodswu Dwpepfx Ab Ujf x1 grinding motor for slot grinding (motor + belt are included) - reference: 144022 x3 grinding tools for slot grinder x1 set of belts for slot grinding motor x1 intermediate plate for alignment of grinding motors - reference: 192940 x1 infinitely adjustable cantilever plate with mounted grinding motor for grinding up to Ø360 [mm] - reference: 144023 x1 adjustable plate, for tilting grinding motors and turbines (up to 16°) - reference: 126148 x1 set of 2 HAUSER 90° angle brackets - reference: 155361 x1 centring microscope - reference: 146318 x1 tool contact detection device - reference: 162334 x20 grinding wheel holders x1 cable for grinding motor Various tools Complete documentation Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. The HAUSER S40-400 is a high-precision CNC coordinate grinding machine. This machine excels in tight tolerance environments such as contouring applications in the aerospace, automotive and medical industries. Thanks to its robust design and advanced capabilities, the HAUSER S40-400 is comparable to machines from well-known brands such as Moore. It can be integrated into workshops comprising Mägerle (Magerle), Studer, Moore, Kellenberger, Okamoto, Jones & Shipman, and ELB machines. In addition to its performance, the HAUSER S40-400 integrates perfectly into workshops equipped with lathes, machining centres or CNC milling machines, offering a complete solution for high-precision grinding and machining of complex parts.

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 46003, Technical characteristics: Work Area # Maximum diameter of the clamping plate: 220 mm # Maximum turning diameter: 170 mm # Maximum machining diameter: 170 mm # Maximum workpiece length: 100 mm # X-axis travel: 495 mm / Rapid feed in X: 48 m/min # Z-axis travel: 250 mm / Rapid feed in Z: 30 m/min # Standard enclosed automation (number of loading stations by workpiece diameter: 14/(80–200 mm), 18/(30–160 mm), 30/(30–85 mm)) Main Spindle # Spindle interface to DIN 55026: Size A5 # Maximum speed: 7000 rpm # Power at 100% duty cycle: 23 kW # Torque at 100% duty cycle: 130 Nm Powered Tool Turret # Turret type: VDI40, Siemens drive 0.5.435.220, Manufacturer: Sauter # Number of stations: 12 # Maximum speed: 4000 rpm Electrical Equipment # Operating voltage: 400 V, fuse protection 80A GL # Connected load: 41 kW Dimensions # Total dimensions: Length = 3913 mm, Width = 2160 mm, Height = 2955 mm # Weight: 6500 kg Gsdpfoxw Ub Ijx Ab Uskf Main Features and Capabilities: # Vertical design: Optimal chip evacuation and easy loading/unloading # CNC control: Siemens 840D SL # High precision: Positioning in X and Z axes via Heidenhain linear encoders # Main spindle - Manufacturer: Weiss, providing high power and wide speed range # Automated loading/unloading: Integrated automation supplies and removes parts # In-process probe: Marposs T25 # Live tooling: Allows drilling and milling operations in addition to turning # Chip conveyor: Knoll # Coolant filtration and cooling: Knoll KF150/950 paper filtering unit # Fire suppression system: Kraft & Bauer # Electrostatic oil mist filter: IF Vario EC1500 Machine status: WORKING

Year of construction: 2023, condition: new, The cable granulator is widely used in copper scrap recycling to separate copper and plastic. The processing capacity is 100-150 kg/h. It can be crushed and separated without classification. It is the best choice for recycling copper scrap. Application V-S10 wire granulator machine is mainly used for processing copper and aluminum wires such as household wires, industrial wires, automobile wires and so on. Design and manufacture 99.99% excellent efficiency and reliability equipment, such as: Copper rice mill, air gravity sorting, electrostatic separation, pre-shredding, vibration screen, magnetic separation conveyor belt, self-cleaning dust separation. Technical Specifications Gkjdpfxopm E U Re Ab Usf Model V-S10 Power 17.8kw Range 0.1~30mm Weight 900kg Mea 1550*1500*2100mm Process capacity 100~150kg/h

Condition: new, functionality: fully functional, Year of construction: 2024, Box Type Electrostatic Powder Coating Oven Gkedpev Nvrvsfx Ab Uef Length:650cm, Width:450cm, Height:250cm Powder Coating Booth with Cartridge Filter: Length:400, Width:300, Height:250cm Electrostatic Powder Coating Equipment: Painting Spray Gun Set

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, spindle speed (max.): 110 rpm, wheel diameter: 275 mm, TECHNICAL DETAILS Max. gear diameter: 275 mm Module range: min. 1.5 / max. 6 Tooth width: 5.5 mm Helix angle: min. 0° / max. 60° Number of teeth: min. 5 / max. 120 Gear ratio: min. 1:1 / max. 1:10 Drive & Control Control: SINUMERIK 840 C Max. workpiece spindle speed: 110 rpm Cutter head speeds: 20 - 110 rpm Total power requirement: 100 kW Machine weight & dimensions Machine weight: approx. 16.7 t Space requirement: approx. 5,200 x 2,300 x 2,400 mm Gksdpfxov Rc Sro Ab Usf EQUIPMENT - Deburring device U-axis / Q-spindle - Chip conveyor - Coolant system - ELBARON electrostatic air cleaner - No tools or workpiece clamping devices

Condition: new, Year of construction: 2025, conveyor belt length: 3,000 mm, Powder coating set Powder Coating Oven 1500 x 3000 x 1800 mm Powder Coating Booth 2800 x 2200 mm Wagner Paint Applicator Oven/Dryer Technical Specifications: Working dimensions: 1500 x 3000 x 1800 mm with NIKO 24.000 overhead rails • Power consumption: 43 kW • Maximum operating temperature: 220°C Equipment: • NIKO 24.000 overhead rail transport • Convection (Even temperature throughout the oven) • 2 x fans for air circulation • Safety locks for opening and closing. Powder booth: Gkedpfx Aeguku Usb Ujf •Working dimensions: 2800 x 2200 mm •Fan power: 2.2 kW •Fan capacity: 10,500 m³/h •Very quiet operation •Automatic filter cleaning •LED lighting Wagner Sprint 2 electrostatic applicator CHOOSE BUMEX SP. Z O.O. Very high quality machines among those offered on the market. Professional advice and service. Warranty. Warranty and post-warranty service. Full technical documentation. 100% customer satisfaction. All BUMEX SP. Z O.O. products are EC certified. We offer our own transport – prices are determined on a case-by-case basis, based on each offer. We issue VAT invoices. Short lead times! Machines in various, customized configurations and sizes are available! Contact us today.

Condition: like new (used), SHIPPING AVAILABLE 🚚 - Brand: Graco - Part number: P1A130 - Type: Rotary Applicator - Includes Air Filtration, plus electrostatic, speed, electronic air and system logic controllers. - ProBell Electrostatic Controller for solvent solution models part no. 24Z098 - Maximum applicator voltage output 100 kV Gkjdpfx Abjr D Rgye Ujf - 1/2 NPT (external thread) - Maximum air working pressure: 7 bar - Ambient temperature range 5 to 40 °C (41 to 104 °F) - Product DEMONSTRATION (USED 1 TEST) - This product would cost 56,280 new - 1 year warranty - VAT 21% NOT included (deductible for professionals)

Year of construction: 2013, condition: as good as new (ex-display), Technical Details : - Sand Blasting + Liquid electrostatic painting line - Manufacturer - IKL AUSTRIA - Size of metal parts - max. 400x 2000 mm - Two Robots - Capacity - 400 bottles / day - Line consists . Gsdpfxohtlw Ro Ab Uekf 1. Sand Blasting line 2. Electrostatic painnting line

Year of construction: 2016, condition: as good as new (ex-display), Manual PVC powder coating line for 3D fence panels ( NEVER USED ) Type of coating – electrostatic Gedpfxjiryd Uo Ab Ujkf PVC coating line is semi-automatic. Need 2-3 workers. Capacity of furnace – 10 pieces of 3D fence panels...baking time approx. 15 minutes ( with color of manufacturer IGP ). Of course baking time depends of color quality and chemical composition of color. The line is made on a modular system, which means that it can be installed in several ways, according to the possibilities of free space in the factory. Dimensions of line components - 1. Polymerization furnace – 2.500 x 3.500 ; Height – 3.200 mm 2. Painting booth ( 2 pieces ) - 3.000 x 2.000 ; Height – 3.200 mm 3. Washing chamber - 2.200 x 3.500 ; Height – 3.200 mm 4. Bath - 2.500 x 2.500 - Height – 900 mm plus two new Gamma pistols.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, ID BYP01 We sell a used Chinese - PP melt-blown fabric extrusion line for melt blown, make: Zhangjiagang Sevenstars Machinery Co., Ltd., MFG 2020. It was used for a short time. excellent condition. All EU import duties have been paid. Output max 400 kg per 24 hours. General description: 1. Product size: PP melt blown fabric with width at 600mm (after trimming 17m*3) 2. Main Material: PP compounding material 3. Extruder type: SJ65/33 single screw extruder 4. Output capacity: 350-400kg/24hour 5. Electric power supply: 3phase, 380V; 50Hz 6. Additional equipment: • Vacuum feeder • Raw material dryer Godouiq Dhopfx Ab Uekf • Mesh manual filter • T-mould for melt blown fabric • Static electrical discharge equipment • Belt type forming 850mm • Collecting device • Winder and slitting Model L/D Output Speed of Screw Rotationl Power Center Height SJ-65 10-33 80-150kg/h 20-120r/min 18.5kw 1000mm This line contains the following machines: Automacic vacuum loader ZJ-400 and hopper dryer make RHONG model RDM-25, MFG 2020; Single screw extruder, model SJ65/33, MFG 2020; Heating oven for hot air, model HJGF101-4, MFG 2020; Extrusion T-mold, model: SUS630, made in Japan, MFG 2020; Forming device, MFG 2020; Winder & slitting system, MFG 2020; Oil free air compressor, MFG 2020; The PP melt blown nonwoven production line is a polymer melt extruded from a screw extruder. The polymer is extremely stretched by high-speed hot air or other means to form very fine short fibers, which are aggregated to A web is formed on a roller or a screen curtain, and is finally reinforced by self-adhesion or thermal bonding. Its unique properties are widely used in mask filter materials, thermal insulation filling materials, medical health materials, wiping materials, etc. The finished product can pass the N95 standard as the core material of the mask. Process of melt blown nonwoven production line Polymer preparation --- Melt extrusion --- Metering pump --- Melt blown die head assembly --- Solution thin-flow drawing --- Fibber cooling --- Auxiliary network --- Electrostatic electret --- Reinforced finished product. Melt-blown cloth is produced by melt-blown process. The equipment mainly includes: screw extruder, melt pump, screen changer, melt-blown device, winding device, air system (hot air blower and heater), etc. The function of the screw extruder is to melt the slice material; the role of the melt pump is to accurately measure, control the output and the fineness of the fiber, and continuously and evenly transfer the melt to the spinneret. The function of the screen changer is to filter out impurities in the melt so as not to block the spinneret holes. The function of the winding device is to pack the melt blown cloth into rolls. The function of the air system (hot air blower and heater) is to provide the temperature and pressure of the hot air used in the drawing of the spinning air stream. Price Euro 39.200 Euro + VAT, negotiable, FCA: Oradea / Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: excellent (used), A homogenizer is the machine that enables the size reduction of globules and fat particles of food products. In other words, it reduces variations in two heterogeneous substances, makes them uniformly consistent and reduces separation after mixing. As a result, we obtain particles of micrometer and nanometer size. This size will always depend on the characteristics of the product in question and the results we seek to achieve. Gkedpfx Ajwny Nzsb Uef Homogenizers stabilize fat emulsions and disperse solids in aqueous solutions. In this way, we avoid that with the difference in density, some parts of the mixture remain on the surface and others precipitate to the bottom. Therefore, we are not only talking about mixing particles, but about a more complex process that can integrate emulsification, homogenization, solubilization, suspension, dispersion and disintegration of solid particles. To carry out this particle size reduction, the product is pumped under pressure by means of valves and pistons in monobloc compression blocks. These valves allow us to define the desired flow rate and pressure.

Year of construction: 2016, condition: as good as new (ex-display), Manual PVC powder coating line for 3D fence panels ( NEVER USED ) Type of coating – electrostatic PVC coating line is semi-automatic. Need 2-3 workers. Capacity of furnace – 10 pieces of 3D fence panels...baking time approx. 15 minutes ( with color of manufacturer IGP ). Of course baking time depends of color quality and chemical composition of color. The line is made on a modular system, which means that it can be installed in several ways, according to the possibilities of free space in the factory. Dimensions of line components - 1. Polymerization furnace – 2.500 x 3.500 ; Height – 3.200 mm 2. Painting booth ( 2 pieces ) - 3.000 x 2.000 ; Height – 3.200 mm 3. Washing chamber - 2.200 x 3.500 ; Height – 3.200 mm Gksdjil Agnopfx Ab Uef 4. Bath - 2.500 x 2.500 - Height – 900 mm plus two new Gamma pistols.