Used Electrostatic Precipitator for sale (129)

Condition: used, Year of construction: 2018, functionality: fully functional, heating capacity: 675 kW (917.74 HP), Complete biomass heating system based on wood pellets Brand wood pellet boilers: KWB Gkjdpfx Abov Uz Efj Ujf Type: Pelletfire Plus MF2S135 (135 kW) Number: 5 (cascade setup) Control: KWB control with online remote control Power range: 40 - 675 kW Year of construction: 2018 Thermal efficiency: 93% Filters: Yes, electrostatic filters are mounted in all flue ducts to collect fine dust Setup: 2 containers on top of each other The installation is complete and custom-made as a "stand-alone", so that the containers are on top of each other. The lower container contains the 5 biomass boilers with the control technology and the upper container contains the bulk stock for the wood pellets. A fuel compartment with a removal system and drop tube has been mounted per boiler. The installation is very well maintained and only certified wood pellets with the EN plus A1 quality mark have been used as fuel. The heating installation is currently stored in a preserved state. If you are seriously interested, the installation can be visited by appointment at the storage location near Rotterdam. Transport and commissioning in consultation. The steelwork that can be seen on the outside photo is not part of the installation. The biomass installation is suitable for, among other things: apartment complexes, apartment buildings with block heating, public swimming pools, large utility buildings, horticulture

Condition: like new (used), Year of construction: 2021, functionality: fully functional, total height: 3,000 mm, total length: 8,880 mm, total width: 4,000 mm, volume flow: 38,000 m³/h, type of input current: three-phase, workpiece weight (max.): 80 kg, compressed air connection: 8 bar, suction capacity: 38,000 m³/h, load capacity: 80 kg, heating capacity: 340 kW (462.27 HP), Equipment: cabin, lighting, For sale is a brand new wet painting line. Internal dimensions of the cabin 8880x4000x3000mm. Overhead conveyor of products with a length of 41m. Pitch of swivel hinges 400mm. Load capacity 80kg/m. Production speed maximum 4m/min. Large door to the cabin 2000x2500mm (possibility of painting large parts). Ventilation exhaust unit 38,000m3/min. Paint preparation room including membrane pump 01D140. Application electrostatic gun. Gas heating 340kW. Gkodpfx Aowmm U Usb Uef

Condition: new, Extraction capacity of filter unit at spigot*: 2420 m³/h Total power consumption*: 1.84 kW Operating voltage: 400 V, 50/60 Hz,3Ph+PE Noise level*: 72 db(A) Dimensions L/W/H in mm: L 1290 / W 588 /H 595 Colour: RAL 7035 Weight: 118 kg Manufacturer: ISI Industrieprodukte GmbH *Depending on the filter equipment Special voltage or special colour on request Application: Separation of emulsion mist, for medium to very large machine workrooms. Your advantages of the COBARON series: - 15 unit variants available Gkodpsh Rfb Hsfx Ab Uof - Direct from the manufacturer - ISI-TRONIC as standard (digitalised filter control) - Electronically controlled EC fan as standard - Adjustable speed and air flow rate - Available with a wide range of filters - High-quality filter media in the pre-filter and main filter area - Separation rates of up to 99.95 - Large range of mounting and connection accessories - Flexibly adaptable to the application - Optimum service life - Quality Made in Germany With COBARON, we offer a filter system that meets today's diverse processing possibilities and the resulting pollutant profiles. In the standard programme alone, the COBARON combination filter system offers various filter equipment variants and can thus be variably configured for many applications. The various configuration levels of the COBARON series were specially developed for applications that were borderline cases for many filter systems (mechanical or electrostatic). The combination of both proven filter principles in the appropriate application increases the effectiveness of the air filter and extends the service life. COBARON can be operated as a purely mechanical filter unit with different filter stages - or additionally configured with an electrostatic filter cell. Our filter units are already digitalised as standard and can be controlled with a laptop, for example.

Year of construction: 2023, condition: new, Josan PVC Mill 500 Gksdpfeqvmn Nex Ab Uof We also offer leasing and financing options. Feel free to ask us! ‼️ Net price only €18,999 ‼️ With our complete system, as shown in the picture, you can finely mill your plastics and feed them directly into the recycling process. Of course, we also have pre-shredders, crushers, and all other types of plastic recycling machines available. Whether you are a large company, medium-sized business, or small enterprise, with our expertise we can cater to your individual needs in the recycling sector with our machines! We have machines in stock in Heilbronn for live demonstrations! From copper granulation plants, shredders, and electrostatic separators (for example, to separate sand from plastic, copper from plastic, different types of plastics, etc.), so you can directly reuse clean material. Just ask us. We manufacture the appropriate system tailored to your needs. Unfortunately, our English is not perfect. You’re also welcome to speak to us in Swabian! Josan PVC Mill 500: ▶️ Throughput approx. 200 kg/h ▶️ Power 37 kW ▶️ 24 rotating and 13 fixed blades made from the hardest special steel alloy ▶️ All-inclusive as shown in picture ▶️ Weight approx. 1,200 kg Net price: €18,999.00 +19% VAT: €3,609.81 Gross price: €22,608.81 Subject to errors. Pictures/description may vary.

Condition: used, _____ Description: Year of manuf. : 2011 Control : Siemens 840 Dsl Turning diam. : 250 mm Spindle: Technology:Motortspindle Speed:6.000 rpm Godov S Dnkjpfx Ab Uokf Power (max.):39 kW Torque (max.):460 Nm Clampingcylinder:Full-Clampingcylinder Workpiececlamping:3-Jaw chuck, SMW Autoblock, KNCS-NB-260-72 Toolcarrier I: Technology:Turret with 12 stations Taper:VDI 40 Tooldrive:6.000 rpm, 7,5 kW, 24 Nm Toolcarrier II: Technology:Drillingstation with Internal coolant supply Taper:Capto C8 In general: Movement in X/Z:1.180/525 mm Rapid travers in X/Z:60/30 m/min Equipment/Accessory: Positionsensor:Direct scales in X/Z Chipmanagement:Chip conveyor Coolingmanagement:Internal cooling unit with paperbeltfilter and high-pressure Toolmonitoring:ARTIS CTM Automation:Workpiecestorage, Circulation systems for Storage, Type L Oilmistseparation:Interface Electrostatic extraction prepared

Condition: good (used), Year of construction: 1992, Schütte WU 405, CNC(NUM) controled tool grinding machine with five axles. Fully functioning and partly revised. Serveral working grinding programms. Electrostatic filter is included. Gkodpfx Aefxz A Aob Uof X-axle 540 mm Y-axle 280 mm Z-axle 260 mm W-axle 355° pivotable A-axle Engine capacity 4.6 Kw The Machine is not used for over three years after a fire, the damage is fully repaired and the machine is completely functional. It is possible to see it working under airpressure and electricity. Availabel programs on the machine: Ballnose cutters Conical cutters Cylindrical cutters Shell end mill Drills (10 different type of noses) Tap Step tools

Condition: used, Exhaust gas filter system, exhaust gas filter system, exhaust gas filter, hot filter, industrial exhaust gas filter, exhaust air purification system, filter cleaning system, electrostatic precipitator -Manufacturer: KMA, exhaust air cleaning system filter cleaning system type SR2200 -Rated power: 0.65 kW -Individual components: see photos -Dimensions: 1220/645/H1335 mm Gksdpfxelb Iv Ej Ab Uef -Total weight: 196 kg

Condition: good (used), Year of construction: 2013, machine/vehicle number: 1305, Offer 21369 Technical Specifications - 4-stage oil mist separation - Electrostatic air filter with filter elements - Pre-separation with washable pore filter - Fine filtration with compact filter - HEPA filter (H 13) - Air flow rate approx. 4000 m³/h - Extraction pipe diameter 315 mm Gedpfev I Tfdsx Ab Uekf - Drive - Fan 400 V / 3 kW - Space requirement approx. W 750 x H 2900 x D 750 mm - Weight approx. 500 kg

Condition: new, Year of construction: 2024, functionality: fully functional, input voltage: 400 V, overall weight: 95 kg, Equipment: documentation/manual, type plate available, Extraction capacity of filter unit at spigot*: 2200 m³/h (free-eye) Total power consumption*: 0.62 kW Operating voltage: 400 V, 50/60 Hz,3Ph+PE Noise level*: 65 db(A) Gsdpeum Uzajfx Ab Ujkf Dimensions L/W/H in mm: L 1623 / W 508 /H 545 Colour: RAL 7035 Weight: 95 kg Manufacturer: ISI Industrieprodukte GmbH *Depending on filter equipment Special voltage or special colour on request Filter equipment*: - 40 mm aluminium mesh pre-filter (optional/retrofittable: PrePac pre-filter package) - 1 piece electrostatic filter cell - 20 mm knitted aluminium post-filter (optional: 40 mm post-filter range) OPTIONAL: Several pre-filter packages possible The application: Horizontal, electrostatic air cleaner with EC centrifugal fan for separating oil mist, emulsion mist and smoke from the hall air in recirculation mode. Vertical raw air capture via intake manifold with suction nozzle. Clean air recirculation via adjustable diffusion grille. Your advantages of the ELBARON series: - 6 appliance variants available - Directly from the manufacturer - Electronically controlled EC fan as standard - Adjustable speed and air flow rate - Simplex (single-stage) or duplex (two-stage) available - Wide range of air flow rates available - Adaptable to pollutant load and air performance requirements - Large programme of mounting and connection accessories - Quality made in Germany We have developed the hall extraction system as a cost-effective alternative to expensive centralised extraction systems or complex individual machine extraction systems. This allows you to protect the health of your employees and maintain your factory building without major investment. We have developed the ELBARON® filter series for use in machining operations with pure oil or for separating oil mist and smoke (oil mist separator). For many years now, the digital electrostatic air filters of the ELBARON® series have been among the most efficient filter devices on the market and are in use worldwide.

Year of construction: 2024, condition: new, We also offer leasing and financing options. Feel free to contact us! For all recycling needs, we have shredders and other recycling machines in stock in Heilbronn! From copper recycling to plastic recycling, you can purchase all machines from us. Just ask! With Josan & Söhne Maschinenbau: Profitable copper processing! ‼️ We are happy to give you a live demonstration of the machines in Heilbronn! By appointment only! ‼️ We are a German company based in Heilbronn, operating under German law, with warranty and service! We also speak English! We are happy to advise you on all recycling matters! Material separation in all recycling applications – just ask us. Electrostatic separator for separating plastic or synthetic materials from copper, iron, or other metals. You can also separate plastics from metals in uPVC windows, or separate plastic from sand or different types of plastics. ➡️ Motor: 6.59 kW ➡️ Dimensions (LxWxH): 4000 x 1400 x 3000 mm ➡️ Weight: approx. 1,000 kg ➡️ Throughput: 150–300 kg per hour Godpfxeqvmpfs Ab Uokf Price on request! Subject to errors and prior sale. Pictures, prices, and specifications may differ.

Year of construction: 2023, condition: new, A typical coating plant consists of surface pre-treatment (cleaning and / or application of a conversion coating), Intermediate drying, electrostatic coating zone ( booth / powder handling system ) and dryer ( egg oven ). The workpieces are transported through a conveyor system. Our company ROMER® plans, manufactures and assembles complete powder coating lines. Gkedpfscv Nl Rox Ab Uef Our plants can be visited and tested in Huerth near Cologne. Let us make you an offer for a plant tailored to your application.

Condition: good (used), Year of construction: 1995, nominal heat output: 3,850 kW (5,234.54 HP), Equipment: hot water, Boiler output: 3,850 kW, operating temperature: 185-190 °C, flue gas flow rate: 19,000 m3/h, fuel type: bark, sawdust, wood chips Gksdpfsv R E Iisx Ab Uof A ROTHEMÜHLE electrostatic precipitator is also available.

Condition: used, Electrician workbench ESD workplace -Dimensions: 1500/750/780 mm Gsdpfxeb A Hk Us Ab Ujkf -Conductive table top with Anka-Plast covering -for workplaces where electrostatically sensitive components and assemblies are processed. -Discharge resistance: according to DIN 51953

Condition: good (used), Year of construction: 1997, machine/vehicle number: 0001, Offer 24587 Gksdpswn Egrofx Ab Uof Technical data: - Electrostatic filter with control light - Exhausted and cleaned air is recirculated to the work area - Wall-mounted version with two jointed extraction arms - Jointed arm length approx. 9000 mm - Air volume flow approx. 4700 m³/h - Active filter surface 9.2 m² - Drive - Fan 400 V / 0.75 kW - Space requirement approx. W 700 x H 1600 x D 550 mm - Weight approx. 120 kg

Condition: new, Extraction capacity of filter unit at spigot*: 980 m³/h Total power consumption*: 0.71 kW Operating voltage: 400 V, 50/60 Hz,3Ph+PE Noise level*: 68 db(A) Dimensions L/W/H in mm: L 1290 / W 345 /H 595 Colour: RAL 7035 Weight: 79 kg Manufacturer: ISI Industrieprodukte GmbH *Depending on filter equipment Special voltage or special colour on request Application: Separation of emulsion mist, for medium to very large machine workrooms. Your advantages of the COBARON series: - 15 unit variants available - Direct from the manufacturer - ISI-TRONIC as standard (digitalised filter control) - Electronically controlled EC fan as standard - Adjustable speed and air flow rate - Available with a wide range of filters - High-quality filter media in the pre-filter and main filter area Godpfx Ajh Rfbqjb Uekf - Separation rates of up to 99.95 - Large range of mounting and connection accessories - Flexibly adaptable to the application - Optimum service life - Quality Made in Germany With COBARON, we offer a filter system that meets today's diverse processing possibilities and the resulting pollutant profiles. In the standard programme alone, the COBARON combination filter system offers various filter equipment variants and can thus be variably configured for many applications. The various configuration levels of the COBARON series were specially developed for applications that were borderline cases for many filter systems (mechanical or electrostatic). The combination of both proven filter principles in the appropriate application increases the effectiveness of the air filter and extends the service life. COBARON can be operated as a purely mechanical filter unit with different filter stages - or additionally configured with an electrostatic filter cell. Our filter units are already digitalised as standard and can be controlled with a laptop, for example.

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 610 mm, total width: 625 mm, total length: 800 mm, overall weight: 100 kg, input voltage: 230 V, suction capacity: 1,200 m³/h, The LTA E 120 air filter extraction system is an electrostatic filtration system specifically designed for the separation of oil and emulsion mists in industrial applications. Such systems are characterized by consistently high separation efficiency and contribute to sustainable production. Gksdev S E H Uopfx Ab Uof A key feature of LTA filtration systems is the automatic cleaning in place (CIP) system, which ensures consistently high filtration efficiency and long-term operational reliability. This system automatically cleans the filter elements with the cooling lubricant used in the machine, without the use of chemical additives or diluted solutions.

Condition: excellent (used), Year of construction: 2004, operating hours: 22,953 h, functionality: fully functional, machine/vehicle number: 0680000211, travel distance X-axis: 650 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 300 mm, rotational speed (max.): 5,000 rpm, New PCU in 2018! TECHNICAL DETAILS Speed: 5,000 rpm Spindle motor: 20 kW Chuck diameter (KITAGAWA): 250 mm Control: Siemens Sinumerik 840D, POWER LINE Travel paths X-axis: 650 mm Y-axis: ± 50 mm Z-axis: 300 mm Gedpfxjvvii Us Ab Ujkf Turret and tools Turret: 12 positions Tool holder: VDI 40 Tool speeds: 4,000 rpm Tool drive power: max. 11.7 kW MACHINE DETAILS Pallet conveyor: EWAB, loading station on the right Machine weight: approx. 8 t On-time hours: 34,982h Spindle hours: 22,953h EQUIPMENT - Measuring probe - Driven tools - C-axis - High-pressure pump with 20 bar, 500 l and double changeover filter - Immersion cooler for coolant - Electrostatic suction of LTA - Collecting tray under the machine - Kitagawa 3-jaw chuck B210 - EWAB pallet conveyor with loading station on the right - Chip conveyor

Condition: used, Used Isobaric Complete Bottling Line for Still and Sparkling Wine up to 3500 bph This complete bottling line has been designed and configured to provide a high-quality, consistent filling process for both still and sparkling wines. Built around an isobaric tribloc system, it integrates rinsing, filling, and capping functions in a continuous flow, ensuring excellent efficiency while maintaining product integrity. The line is currently set up for still wines at an output of 3,500 bottles per hour and for sparkling wines at 3,000 bottles per hour. It is already technically prepared for sparkling wine production and only requires the addition of a mushroom corker, a capsule applicator for spumante hoods, and a heating tunnel if needed. The system is equipped with dedicated conveyors, a centralized lubrication system, and separate control panels for conveyor management, enabling straightforward maintenance and integration into existing plant automation. The entire layout follows a linear configuration, optimised for space utilisation and ensuring smooth product transfer between each stage without unnecessary accumulation points. Bottling Process and Core Machinery At the start of the line, empty bottles are automatically fed into the system via a depalletizer. This equipment gently lifts and transfers the bottles onto the feeding table while maintaining their integrity. Bottles are then directed to the tribloc system, where three key operations are performed in sequence: rinsing, filling, and capping. Gkodpfow Imp Hex Ab Ujf The isobaric filling technology ensures precise fill levels and consistent carbonation retention for sparkling wines, while also being perfectly suited for still wine bottling. The filling valves are designed to minimise oxygen pickup, which is crucial for preserving the wine’s sensory qualities and shelf life. The rinser operates with clean water or a sanitising solution, ensuring bottles are free from contaminants prior to filling. The capping turret, currently configured for still wine closures, applies either BVS screw caps or traditional corks, depending on the selected format. A dosing unit for gum arabic is integrated into the line. This system allows for precise addition of stabilising agents post-filling, which helps maintain wine clarity and prevent precipitation during storage. A dedicated steam generator (vapouriser) is included for both line sanitisation and, when required, pre-heating applications. Prior to filling, a microfiltration unit is positioned to ensure that the product entering the tribloc meets the desired microbiological standards. This step is essential for ensuring product stability and quality without the need for excessive chemical preservatives. Downstream, bottles are transferred to the labelling station. While the labelling unit is supplied by a third-party manufacturer, it is electrically integrated into the line and can be configured for multiple label types, including adhesive and cold-glue systems.

Condition: reconditioned (used), Year of construction: 2012, operating hours: 25,150 h, functionality: fully functional, machine/vehicle number: 30017409, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, workpiece weight (max.): 600 kg, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, 5-axis simultaneous milling machine with 60 mm long workpiece feeder Hedelius RS80 S including long tower Program run time 25,130. Still in operation Spindle: 300 hours Speed: 30-8,000 rpm Power (approx.): 25 kW Torque (approx.): 244 Nm Internal coolant supply 25-70 bar Tool holder: SK 40 DIN 69871 AD Gksdpfxewl Dy Ee Ab Uef Tool magazine: 30 + 190 additional stations Encapsulated Heidenhain linear measuring system: Direct in X/Y/Z/A/C Travel: XYZ 800 800 600 Rapid traverse in X/Y/Z: 40 m/min NC swivel rotary table: A-axis: +95° / -95° C-axis: 360° Clamping surface: ø800 x 630 mm Table load (max.): 600 kg Equipment/Accessories: Chip conveyor Inclined bed coolant system SKM 1250 L High-pressure coolant pump IKZ 70 bar Flushing guns Hydraulic clamping and unclamping on the table via M command (2 pieces) Workpiece measuring probe: Infrared M&H probe Blum laser tool control and a measuring system for diameter and length Fully enclosed work area hood with blinds 2 electrostatic air filters LTA type AC 1000 Interior flushing Automatic door interface Automation Setup mode: Electronic handwheel Heidenhain 410 Lang Eco Tower 60 including 50 77 mm clamps Can be viewed under current

Condition: new, functionality: fully functional, Year of construction: 2025, Aluminum Aging Furnace is the furnace where the precipitation hardening, i.e. aging process, of the aluminum profiles drawn in the extrusion line is performed. Aluminum thermalization furnaces harden the porous structure of aluminum by subjecting the profiles kept between the specified temperature and time periods to the aging process. As HAS MAKİNA POWDER PAINTING SYSTEMS, we design and manufacture furnace production in various sizes and capacities in accordance with the demand and intended use within the necessary engineering calculations for our valued customers. Profile Thermalization Furnace, Aluminum Thermalization Furnace, Thermal oven, Aluminum aging furnace, Gkedpfxov Nkipo Ab Uef Profile thermalization furnace,

Condition: new, Extraction capacity of filter unit at spigot*: 2600 m³/h (free-eye) Total power consumption*: 0.62 kW Operating voltage: 400 V, 50/60 Hz,3Ph+PE Noise level*: 66 db(A) Gsdpfopkwauox Ab Uekf Dimensions L/W/H in mm: L 111 / W 508 /H 545 Colour: RAL 7035 Weight: 111 kg Manufacturer: ISI Industrieprodukte GmbH *Depending on filter equipment Special voltage or special colour on request NEW: Pre-filter system (optional) Application: Extraction of oil mist, emulsion mist (for emulsions with higher oil contents) and smoke, for small to very large machine workrooms | Oil mist separator. Your advantages of the ELBARON series: - 18 unit variants available - Direct from the manufacturer - ISI-TRONIC as standard (digitalised filter control) - Electronically controlled EC fan as standard - Speed and air flow rate adjustable - Simplex (single-stage) or duplex (two-stage) available - Wide range of air flow rates available - Adaptable to pollutant load and air performance requirements - Large range of mounting and connection accessories - Quality Made in Germany We have developed the ELBARON® filter series for use in machining operations with pure oil or for separating oil mist and smoke (oil mist separator). For many years now, the digital electrostatic air filters of the ELBARON® series have been among the most efficient filter units on the market and are in use worldwide. Our filter units are already digitalised as Option and can be controlled, for example, with a laptop. The ELBARON® unit series comprises 18 unit variants and can be optimally designed for your application in terms of size and performance. ELBARON® units impress with their long service life and absolute functional reliability. Our electrostatic filter cells are dimensioned in such a way that the best possible filter efficiencies, service lives and trouble-free operation are achieved under economic aspects.

Condition: new, SAPI Powder Coating The Perfect Coating for Lasting Protection. Powder coating is a highly effective and widely used method for applying a protective and decorative surface to various types of substrates. It is a dry finishing process where a fine powder made of resins, pigments, and additives is applied to a substrate. The powder is electrostatically charged, allowing it to adhere evenly to the surface and form a uniform coating. To achieve optimal adhesion and durability, the substrate is thoroughly cleaned and prepared first. Oils, dirt, and other contaminants are removed to ensure a clean surface. This is crucial for ensuring that the powder bonds effectively to the substrate, creating a strong and long-lasting coating. Components of a Powder Coating System A typical powder coating system consists of several components and devices required for applying and curing the powder coating. Gkjdpfxjun Sd Uo Ab Ujf Spray Booth and Spray Area The booth provides a clean environment for the application process and ensures an even distribution of the powder. 🎨 Powder Coating Gun A powder coating gun is used to apply the powder coating to the workpiece. 💨 Powder Feed System The powder feed system consists of a hopper or container where the powder coating material is stored. It typically includes devices like powder pumps, feed hoses, and powder sieves to transport the powder from storage to the spray gun. 🔄 Pre-treatment Equipment Pre-treatment systems are used to prepare the substrate before applying the powder coating. This can include processes like cleaning, degreasing, rinsing, and surface treatment to ensure proper adhesion and durability of the coating. 🧼 Curing Oven A curing oven is a crucial component of a powder coating system. It is used to heat the coated substrate to the correct temperature so the powder coating melts, flows, and hardens into a permanent surface. The oven usually consists of a conveyor system or racks to transport the coated parts through the oven chamber. 🔥 Exhaust System An exhaust system is installed to remove excess powder, fumes, or volatile compounds generated during the coating process. It helps maintain a clean and safe work environment for the personnel and prevents the accumulation of powder particles in the air. 🌬️ Looking for a Powder Coating Solution? Are you searching for a custom powder coating solution? We specialize in providing tailored powder coating solutions to meet your individual needs. Whether you have specific color requirements, complex designs, or challenging substrates, our experienced team is ready to deliver exceptional results. 💡 Contact us today to discuss your requirements, and let us develop a custom powder coating solution for you. 📞 Get in touch with us today!

Condition: good (used), Year of construction: 2012, Built in 2012 Size max 330 x 250 mm Size trimmed max 330 x 250 mm min 200 x 148 mm Size trimmed without lap max 340 x 260 mm booklet thickness 4-6 mm Mechanical Speed max 22.000 t/h Equipment crane system • 2 Bundle clamps gathering chain & feeders • 8 stations gathering chain • 6 feeders 0416.0440 • 6 streamfeeders 3738 with extensions • 1 Card gluer 423 • 1 Semko • 3 ELTEX static devices stitching unit 410.0425 • 2 stitching heads three knife trimmer • three knife trimmer 304 knives • 2 sets of knives controls • automatic selfajusting calipers ASAC • signature reading system ASIR • automatic make ready system Amrys Pick up station with chain and delivery station Inserter • Müller Martini Integro Gksdotryhfspfx Ab Usf • 4 stations • reject unit • transfer unit Addressing unit • Sitma 930-A Stacker • Müller Martini Robusto 451 Electrostatic Blocker • Müller Martini 457 Condition Very good working condition can been tested

Condition: excellent (used), Year of construction: 2009, Perfect Binding Line, consisting of: Gathering Machine ZU 841.A - basic frame with 21 gathering stations - 19 standard feeders - 1 handfeeding station (covering 2 housing stations) - device for electrostatic fixation of three advertising medias - integrated jogging station - Aircenter - reject unit AS 841 to the right - transfer channel as connecting unit to the binder Perfectbinder KM 473 - 26 clamps - handfeeding - main milling station - equalized milling station - notching station - micro-notching station - brushing station with roller brush - 2 Hotmelt spine gluing units - 1 Hotmelt side gluing unit - 3 premelters LH 375 - IR heating at curve - stream cover feeder SAL 411.A - scoring station for 4 scores Gkedpovg Ad Tofx Ab Uof - 2 pressing stations - gripper carriage delivery - laydown device Transport and Drying Line, incl. Ambaflex drying tower, incl. emergency delivery Three Knife Trimmer HD 153.P - copilot - right hand infeed - counter stacker - silicon spraying device - standard cutting cassettes 7 - 18 additionally available: Kolbus book block feeder with delivery belt Kolbus card gluer KK 841 PUR spine gluing unit with Nordson smelting unit Best for PUR cover 600L Kolbus destacker AE 360 Kolbus blocking unit VB 120 pallettizer Kolbus PL 770 or Kolbus PL 771

Condition: new, Year of construction: 2025, SAPI Powder Coating The perfect layer for lasting protection. Powder coating is a highly effective and widely used method for applying a protective and decorative finish to various types of surfaces. It is a dry finishing process in which a fine powder composed of resin, pigments, and additives is applied to a substrate. The powder is electrostatically charged so that it adheres evenly to the surface, forming a uniform coating. To achieve optimal adhesion and durability, the substrate is first thoroughly cleaned and prepared. Oils, dirt, and other contaminants are removed to ensure a clean surface. This is crucial for the powder to bond effectively to the substrate and achieve a strong and long-lasting coating. A powder coating system typically consists of various components and equipment required for the application and curing of powder coatings. SAPI_Powder_spray_gun Gedpfswf Dpgox Ab Uskf Spray Booth and Spray Area The booth provides a clean environment for the application process and ensures even powder distribution. Powder Coating Gun A powder coating gun is used to apply the powder coating to the workpiece. Powder Feed System The powder feed system consists of a hopper or container in which the powder coating material is stored. It typically includes equipment such as powder pumps, feed hoses, and powder screens to transport the powder from storage to the spray gun. Pretreatment Equipment Pretreatment equipment is used to prepare the substrate before the powder coating is applied. This may include processes such as cleaning, degreasing, rinsing, and surface treatment to ensure good adhesion and durability of the coating. Curing Oven A curing oven is an essential component of a powder coating system. It is used to heat the coated substrate to the correct temperature so that the powder coating can melt, flow, and cure into a durable finish. The oven typically consists of a conveyor system or racks to transport the coated parts through the oven chamber. Exhaust system An exhaust system will be installed in the facility to extract excess powder, fumes, or volatile compounds generated during the coating process. This system helps maintain a clean and safe working environment for personnel and prevents the accumulation of powder particles in the air.