Used Electrostatic Precipitator for sale (126)

Condition: good (used), Year of construction: 2012, Exhaust gas filter system, exhaust gas filter system, exhaust filter, hot filter, industrial exhaust gas filter, exhaust air purification system, filter cleaning system, electrostatic precipitator, filter system, oil mist separator, oil mist separator, air filter, mist separator, oil and emulsion mist separator, particulate filter, industrial filter -Manufacturer: ifs, exhaust air purification system industrial filter type IF-Vario M 1600 -Nominal power: 0.75 kW -Suction power: 1600 m³/h -Individual components: see photos -Dimensions: 990/600/H660 mm -Total weight: 100 kg Rbjdpfx Ajwrcbnofbet

Condition: good (used), Exhaust gas filter system, exhaust gas filter system, exhaust gas filter, hot filter, industrial exhaust gas filter, exhaust air purification system, filter cleaning system, electrostatic precipitator, filter system, oil mist separator, oil mist separator, air filter, mist separator, oil and emulsion mist separator, HEPA filter Rbjdpfolb Iv Eox Afbet -Manufacturer: KMA, Exhaust air purification system filter cleaning system type SR2200 -Rated power: 0.65 kW -Individual components: see photos -Dimensions: 1220/645/H1335 mm -Total weight: 196 kg

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, heating capacity: 1,600 kW (2,175.39 HP), Equipment: documentation/manual, hot water, Polzenith Heating Boiler 1.6 MW, year of manufacture 2007 Very well-maintained combustion system by Polzenith with a heating capacity of 1.6 MW. Complete system including: - Fuel storage. Steel construction with walking floor - Scraper conveyor Rsdpfxsw Nrr No Afbobt - Beth electrostatic precipitator with electrical cabinet - Chimney approx. 12 m high - All flue gas lines - Complete with control panel and hydraulic unit System has been professionally dismantled and is immediately ready for loading.

Condition: used, Year of construction: 2021, turning diameter max. 2.800 mm diameter of spindle flange 1.100 mm max. swing diameter 3.000 mm control 840 D sl Siemens turning speed range - main spindle max. 230 min/-1 Rodjxap Dcopfx Afbobt power capacity - main spindel 206 kW max. Torque 53.000 Nm tool taper Capto C8 swivellable B: 0 - 270 ° Spindle speed - driven tool pos. max. 6.000 min -1 max. Torque 120 Nm tool taper Capto C8 number of toolpositions 41 pos. max. tool weight 20 kg max. tool length 400 mm workpiece diameter at full load 150 mm tool taper Capto C8 number of toolpositions 25 pos. workpiece diameter at full load 150 mm max. tool weight 20 kg max. tool length 400 mm tool taper Capto C8 x-axis 1: 2.700 mm x-axis 2: 2.700 mm z-axis ((((2x 1.000 mm rapid traverse X: 40 / Z: 24 m/min feed power X/Z: 22 kN total power requirement 200 kVA weight of the machine ca. ((((ca. 30 t dimensions of the machine ca. 10,4 x 6,3 x 5,7 m CNC - Double-Spindle-Vertical-Lathe PITTLER - PV 2500 - Control system expansion / software SINUMERIK 828D/840D SL ProgramSYNC software option - Retractable step guards - Coolant circulation system - Oil hose skimmer - SIEMENS Safety integrated - Network interface / data transmission DNC option - Variable speed range to prevent vibrations - Air cleaner, electrostatic precipitator - Touch probe for in-process workpiece measurement - Walk-in work area

Condition: used, Year of construction: 2020, operating hours: 4,042 h, functionality: fully functional, machine/vehicle number: W20-1123-01, We offer this used Hamos DM43310 electrostatic sorting machine, year of manufacture 2020. Rsdpfx Asx S Ngwjfbsbt If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 1997, Description: Suitable for regrinding and manufacturing new wooden and metalworking tools of all kinds. Accessories: Software Package 1 (cylindrical tools sharp-edged, corner and full radius), Software Package 2 (conical-spiral tools sharp-edged, corner and full radius), Software Package 3 (drills and step drills), Software Package 4 (step tools) Software Package 6 (woodworking tools), Software Package 16 (warming-up program), Software Package 27 (free programming), Heli-Flute & Cone (flute calculation program for cylindrical and conical mills), stepless speed control, pneumatic workpiece clamping, Probe, automatic fire protection system, electrostatic extraction, oil collection tray, automatic central lubrication, X axis longitudinal movement: 400 mm Y - axis vertical movement: 250 mm Rbsdpfex H Nqljx Afbjt Z-axis cross movement: 580 mm C-axis rotary table: Swivel range +/- 200 ° Workpiece holder: ISO 50 max. workpiece length: 270 mm max. grinding wheel diameter: 200 mm, Max. Workpiece diameter: 260 mm Grinding spindle speed infinitely variable: 0 - 9500 rpm. weight: approx. 3200 kg Drive power grinding spindle: 10,0 kW Connected load: 15 kVA (400 V / 50 Hz) Dimensions W x D x H: 2000 x 2010 x 2150 mm colour: grey RAL 7035/7043

Condition: used, Year of construction: 2018, x-travel 3200 / 2630 mm y-travel 750 mm z-travel 695 / 800 mm Control Heidenhain TNC 640 swivelling range -98 bis 98 Grad rotary table dia. 750 mm total power requirement 29 kW weight of the machine ca. 16 t Hedelius traveling column machining center Tiltenta 7 Magnum with continuously swiveling main spindle, 5-axis CNC control Heidenhain TNC 640, 22.0 kW/117 Nm main spindle drive 50-12000 rpm, 50-fold tool magazine and NC rotary table integrated into the fixed machine table. Machine equipment: T7M-3200, operating mode 3 -Pressure booster pump 50 bar -Heidenhain TNC 640-T series -Spindle speed 12000 rpm/29.0 kW -Extended swivel range TNC/T -HR 510 handheld control unit -SK40/190 standby magazine Rbjdpfxewfqqks Afbst -Cone cleaning station -900 l slant bed coolant system -25 bar internal coolant supply -Slant bed coolant system prefilter -Electrostatic exhaust air filters T / 2x1300 -Compressed air nozzle on spindle head -Internal compressed air supply -Blow-off guns -Rinsing guns -Infrared receiver M&H 91.40 -3D infrared measuring probe M & H 25.50 -Toolsetter M&H 35.70 -Workspace partition T7 with slider Control on: 33163:56:22 Machine on: 24185:07:21 Program run: 16784:12:57 Spindle: 11751.13.08

Condition: used, This listing is for a nonoperational Eppendorf Mixmate 5353 Mixer. This unit is supplied nonoperational and is ready for immediate release. The Eppendorf MixMate 5353 is an advanced lab mixer designed for optimal precision and efficiency when handling small sample volumes, making it an essential tool for various applications in research and clinical settings. Key Features: Versatile Format Compatibility: The MixMate can accommodate a wide range of tube and plate formats, including 96 and 384 well plates, as well as 0.2ml PCR tubes, 0.5ml, 1.5ml, and 2.0ml tubes. Integrated Vortexing Action: Its unique vortexing action is perfect for applications such as resuspending bacterial pellets, DNA samples, cell cultures, conducting immunoassays, and performing solubility tests. For instance, it can quickly re-suspend DNA pellets after ethanol precipitation, ensuring thorough mixing without sample loss. Speed and Flexibility: Mixing Frequency: Ranges from 300 to 3,000 RPM in 50 RPM increments. Touch Vortexing Frequency: Reaches up to 3,500 RPM for rapid, on-demand mixing. 2D Mix Action: The innovative 2D mixing action ensures uniform mixing across all wells, which is critical for experiments requiring consistent sample homogeneity, such as high-throughput screening assays. Adjustable Mixing Time: Users can set mixing times between 15 seconds and 99.5 hours or choose continuous operation, providing flexibility for both quick mixing tasks and longer protocols. Programmable Features: The user-friendly digital control panel can store up to 5 predefined programs, allowing for quick access to frequently used mixing parameters. Specifications: Plate Dimensions: Accommodates plates sized 5 x 3 inches. Power Requirements: Operates on 115 – 230V; 50-60 Hz. Dimensions: Compact size of 9 x 7 x 7 inches. Weight: Weighs 10 lbs, making it portable yet sturdy. Applications: Rbsdpsxv A Tcsfx Afbet The Eppendorf MixMate 5353 is ideal for: Molecular Biology: Resuspending nucleic acid samples and cell cultures. Immunology: Preparing samples for immunoassays with consistent mixing. Pharmacology: Conducting solubility tests for drug compounds in different solvents.

Condition: used, This listing is for a Heraeus Biofuge Primo R Refrigerated Centrifuge. The unit is in full working condition and is ready for immediate release. The Heraeus Biofuge Primo R Refrigerated Centrifuge is an outstanding choice for small medical labs and research facilities looking for reliable and efficient sample processing. Its compact design pairs well with high-performance capabilities, making it ideal for a variety of applications. Key Features: Refrigerated Functionality: The centrifuge includes temperature control, ensuring that samples remain stable during processing, which is crucial for sensitive biological specimens. Versatile Rotor Options: The fixed angle rotor accommodates 6 x 50 mL tubes, but with the right rotor and adapter combinations, it can handle tube sizes ranging from 0.2 mL to 100 mL. This versatility allows for diverse applications from microcentrifugation to larger samples. User-Friendly Controls: A digital display shows all run parameters, while variable speed and RCF (Relative Centrifugal Force) controls let users set specific conditions. The QUICK RUN key is perfect for quick spins, enhancing efficiency. Rjdpfxsxxz Svs Afbebt Safety and Reliability: Features include automatic rotor recognition, imbalance detection, and a dual lid-locking mechanism that ensures safe operation. It also has an electronic imbalance detection system to prevent accidents during runs. Applications: Cell Sedimentation: Ideal for isolating algae, yeast, bacteria, and cell organelles. Sample Preparation: Great for preparing DNA and protein precipitates, which are essential in molecular biology labs. Clinical Analysis: Suitable for blood and urine analyses, making it a valuable tool in medical diagnostics. Centrifugation of Microliter Tubes: Capable of processing standard test series in microliter tubes, ensuring versatility in routine analyses. Specifications: Maximum Speed: 15,000 rpm Maximum RCF: 21,890 x g Control Speed: Adjustable from 300 to 15,000 rpm (±10 rpm) Noise Level:

Condition: used, This listing is for the Thermo Scientific Heraeus Biofuge Primo The unit is in full working condition and is ready for immediate release The Thermo Scientific Heraeus Biofuge Primo R Centrifuge enables high-performance, small-capacity processing with a compact design. It supports optional rotors and accessories with top speeds up to 15,000 rpm, making it a versatile, space-saving solution for laboratories that require both speed and cooling. Key Features: Refrigerated, benchtop centrifuge with temperature control from -9°C to +40°C Automatic rotor recognition and imbalance detection for safety and ease of use Uniform temperature control for sample integrity Compact design, ideal for small medical labs, biochemistry and molecular biology research, and routine industrial analysis Typical Applications: Sedimentation of cells (algae, yeast, bacteria, etc.) Centrifugation of cell organelles and fragments DNA and protein precipitate preparation Rbsdsxv A Ugjpfx Afbot Blood and urine analysis Centrifugation of microliter tube test series

Condition: ready for operation (used), Year of construction: 2008, operating hours: 12,125 h, spindle motor power: 29,000 W, spindle speed (max.): 5,000 rpm, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D, number of axes: 6, This 6-axis EMCO Hyperturn 665MC Plus turn-mill centre was manufactured in 2008. It features a multi-axis CNC system with Y-axis and B-axis for complete machining of turned and milled parts. Equipped with integrated spindle motors on both main and counter spindles, it offers a spindle speed up to 5000 min-1 for the main and 7000 min-1 for the counter spindle. Includes a 24-position tool magazine and SINUMERIK 840D control. If you are looking to get high quality turning and milling capabilities consider the EMCO Hyperturn 665MC Plus machine we have for sale. Contact us for more information about this machine. Additional equipment • Tool turret: 12-position tool VDI 30 radial with directional logic for up to 12 driven tool stations • B-PowerMill: Motorised milling spindle with 24-position tool magazine, 210° swivelling range • Optional tool package: Includes stationary and driven tool holders, collet chuck holders, reducing sleeves, and operating spanners • Hollow clamping cylinder with draw tube / Part ejector and flushing through the counter spindle / Part pick-up device for finished parts • Part pick-up device for finished parts / Coolant device in the chip conveyor / High-pressure pump (14 bar) and fine filter • Flushing pumps (3.7 bar) / Control cabinet air conditioning unit / Electrostatic oil mist separator • Hydraulic unit / Machine light / Interface for foot switch / Signal lamp • Documentation including handwheel, PC keyboard, network preparation, tool monitoring, turning window, cleaning gun • Clamping device for main spindle: Hainbuch BZI 80 centre pull / Machine Benefits Rbodpfxsx D Hwno Afbjt Technical Machine Benefits • Counter spindle: 22 kw / counter spindle: 0-7000 rpm • Main spindle: kk 6 (passage 65 mm) / counter spindle: kk 6 • Y-axis travel range: +/- 50 mm • C-axis for main and counter spindle • Counter spindle: 3-jaw chuck 210 mm • Approx. 40 capto c4 holders for milling spindle • Loader lm 1200 • Machine does not have shopturn programming. It must be programmed using iso code, whereby simple cycles are available for drilling, milling, swiveling, etc. • 12-station turret and a milling spindle

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Z-axis: 130 mm, total height: 2,750 mm, feed rate X-axis: 1 m/min, feed rate Y-axis: 1 m/min, feed rate Z-axis: 12 m/min, table width: 630 mm, table length: 770 mm, distance table to spindle center: 585 mm, type of input current: three-phase, table load: 500 kg, overall weight: 4,500 kg, travel distance W-axis: 500 mm, distance between stands: 750 mm, Equipment: documentation/manual, CNC JIG GRINDING MACHINE HAUSER S40-400 TECHNICAL CHARACTERISTICS : Stroke X axis: 650 [mm] Max. Stroke speed X axis: 4000 [mm/min] Working feed X axis: 0 - 1800 [mm/min] Stroke Y axis: 450 [mm] Working feed Y axis: 0 - 1800 [mm/min] Stroke Z axis: 130 [mm] Min. Stroke speed Z axis: 0.5 [mm/min] Max. Stroke speed Z axis: 12000 [mm/min] Stroke frequency Z axis: max. 4 [Hz] Stroke W axis: 500 [mm] Planetary speed C axis: 5 - 250 [rpm] Max. Stroke speed W axis: 800 [mm/min] Stroke U axis (radial feed): 5.5 [mm] Distance between columns: 750 [mm] Table length: 770 [mm] Table width: 630 [mm] Clearance between grinding motor and table: 585 [mm] Max. load on table: 500 [Kg] Supply voltage: 400 [V] Weight: 4550 [Kg] ADDITIONAL INFORMATION : x1 HI-CUT pack including: -work area protection Rbedpfx Ajya Dz Refbot -exhaust system with electrostatic air filter -fire protection system (to be assessed by a qualified body) -HTG-RWS-60 automatic belt filter cooling unit x1 MSS (Multi-Sensoric System) tool detection device x1 CBN dressing unit with HF drive for automatic dressing of CBN grinding wheels (ceramic bond and synthetic resin) x1 T16 grinding turbine - speed: 160,000 rpm - reference: 164225 x1 turbine support with filter for use with T10 and T16 turbines - reference: 166497 x1 60S-TC grinding motor, speed 9000 - 60000 [rpm], for SK20 collets - part number: 208450 x1 intermediate plate for aligning motors and urbines - reference: 192940 x1 centring watch holder for grinding motor rotor - reference: 191790 x15 wheel holder cleats x1 cable for grinding motor Various tools Full documentation Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. The HAUSER S40-400 is a high-precision CNC coordinate grinding machine. This machine excels in tight tolerance environments such as contouring applications in the aerospace, automotive and medical industries. Thanks to its robust design and advanced capabilities, the HAUSER S40-400 is comparable to machines from well-known brands such as Moore. It can be integrated into workshops comprising Mägerle (Magerle), Studer, Moore, Kellenberger, Okamoto, Jones & Shipman, and ELB machines. In addition to its performance, the HAUSER S40-400 integrates perfectly into workshops equipped with lathes, machining centres or CNC milling machines, offering a complete solution for high-precision grinding and machining of complex parts.

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 650 mm, travel distance Z-axis: 130 mm, feed rate X-axis: 1 m/min, feed rate Y-axis: 1 m/min, feed rate Z-axis: 12 m/min, table length: 770 mm, distance table to spindle center: 585 mm, type of input current: three-phase, table load: 500 kg, overall weight: 4,550 kg, travel distance W-axis: 500 mm, distance between stands: 750 mm, clearance between the columns: 750 mm, Equipment: documentation/manual, CNC Jig grinder HAUSER S 40 400 Rbodsya Az Nspfx Afbjt TECHNICAL CHARACTERISTICS : Stroke X axis : 650 [mm] Max. Stroke speed X axis : 4000 [mm/min] Working feed X axis : 0 - 1800 [mm/min] Stroke Y axis : 450 [mm] Working feed Y axis : 0 - 1800 [mm/min] Stroke Z axis : 130 [mm] Min. Stroke speed Z axis : 0.5 [mm/min] Max. Stroke speed Z axis : 12000 [mm/min] Stroke frequency Z axis : max. 4 [Hz] Stroke W axis : 500 [mm] Planetary speed C axis : 5 - 250 [rpm] Max. Stroke speed W axis : 800 [mm/min] Stroke U axis (radial feed) : 5.5 [mm] Distance between columns : 750 [mm] Table length : 770 [mm] Table width : 630 [mm] Clearance between grinding motor and table : 585 [mm] Max. load on table : 500 [Kg] Supply voltage : 400 [V] Weight : 4550 [Kg] EQUIPMENT INCLUDED: x1 HI-CUT pack including: -work area protection -exhaust system with electrostatic air filter -fire protection system (to be assessed by a qualified body) -automatic paper tape filtration unit x1 grinding motor 22 S, speed 4500 - 22500 [rpm], for EX23 collets - part number: 181561 x1 45 S grinding motor, speed 9000 - 4500 [rpm], for EX19 collets - reference: 144017 x1 80 S grinding motor, speed 40000 - 80000 [rpm], for F6 collets - reference: 144021 x1 grinding motor for slot grinding (motor + belt are included) - reference: 144022 x3 grinding tools for slot grinder x1 set of belts for slot grinding motor x1 intermediate plate for alignment of grinding motors - reference: 192940 x1 infinitely adjustable cantilever plate with mounted grinding motor for grinding up to Ø360 [mm] - reference: 144023 x1 adjustable plate, for tilting grinding motors and turbines (up to 16°) - reference: 126148 x1 set of 2 HAUSER 90° angle brackets - reference: 155361 x1 centring microscope - reference: 146318 x1 tool contact detection device - reference: 162334 x20 grinding wheel holders x1 cable for grinding motor Various tools Complete documentation Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. The HAUSER S40-400 is a high-precision CNC coordinate grinding machine. This machine excels in tight tolerance environments such as contouring applications in the aerospace, automotive and medical industries. Thanks to its robust design and advanced capabilities, the HAUSER S40-400 is comparable to machines from well-known brands such as Moore. It can be integrated into workshops comprising Mägerle (Magerle), Studer, Moore, Kellenberger, Okamoto, Jones & Shipman, and ELB machines. In addition to its performance, the HAUSER S40-400 integrates perfectly into workshops equipped with lathes, machining centres or CNC milling machines, offering a complete solution for high-precision grinding and machining of complex parts.

Condition: good (used), Year of construction: 2008, - Max. turning diameter over bed: 700 mm - Turning length: 1,500 mm Main spindle: - Speed range: 2,800 rpm - Enlarged main spindle: Ø 150 mm, bore: 110 mm - Drive power: 30 kW, 900 Nm - Spindle nose: Size 11 Total power requirement: 59.5 kVA Approx. machine weight: 14.5 t Space requirement approx.: 6.4 x 3.0 x 2.6 m EQUIPMENT: - 3-jaw chuck, SMW KNCS-N 400 K11 - Tailstock - Programmable CNC steady rest slide (cross slide NOT retractable) - SMW-AUTOBLOK SLU-3, self-centering steady rest, clamping range Ø 12 - 152 mm - Full clamping cylinder for partial hollow clamping, draw tube bore max. Ø 100 mm - In-process measuring system Renishaw for X-/Z-/C-axis - Programmable CNC tailstock on W-axis - Drilling/milling spindle and C-axis 0.001° - Tool changer: 80 positions Tool system: HSK-A63 - Y-axis travel +115/-115 = 230 mm - B-axis 225°, positioning in 0.001° increments - ICS / internal coolant supply for driven tools - Synchronized thread cutting with driven tools - Software for use of multifunctional tools, e.g. special tool with radially arranged indexable inserts, which can be positioned in the drilling/milling spindle at 60°, 90°, 120° and 180° positions - Software for gear hobbing for straight and helical gearing with speed synchronization of main and milling spindles Rbedpfx Asxmirgefbjt - Electrostatic extraction unit - Chip conveyor - Documentation - CE marking

Condition: good (used), Airless sprayer, painting device, spray pack, paint sprayer, paint spray system, paint pump, electrostatic sprayer, airless complete system, pneumatic piston pumps, airless high-pressure pump, air motor, AIR MOTOR -Manufacturer: Wagner, Airless sprayer type: 33-70 with transport trolley and spray gun -Material flow: max. 12.6 l/min Rsdpfx Afsw U T Atjbjbt -Air inlet pressure: max. 8 bar, operating pressure max. 264 bar -Individual components: see photos -Dimensions: 830/680/H1140 mm -Weight: 50 kg

Condition: excellent (used), Year of construction: 2011, operating hours: 31,648 h, functionality: fully functional, machine/vehicle number: 90265 2011, saw blade diameter: 710 mm, tooth pitch: 55 mm, grinding wheel diameter: 200 mm, total width: 2,662 mm, total length: 2,540 mm, total height: 2,640 mm, type of input current: AC, input current: 10 A, input frequency: 50 Hz, disc diameter: 200 mm, grinding wheel bore: 32 mm, grinding spindle motor power: 3,000 W, saw blade width: 8 mm, input voltage: 400 V, overall weight: 3,200 kg, saw blade bore: 80 mm, power: 10 kW (13.60 HP), grinding diameter: 710 mm, workpiece diameter (max.): 710 mm, Equipment: rotational speed infinitely variable, CNC saw blade sharpening machine with lateral tooth divider grinding device and saw blade magazine for blades up to D=560 mm for unmanned operation. In manual mode: 40–710 mm. Saw blade magazine with 3 holding arbors. Oil filtration system for HSS, oil cooler brand Polar 2.9. Tooth geometries HSS: Form A, B, BW, C and special tooth forms. Saw blade holders for manual loading D=75 to 250 mm and D=40 to 100 mm. Special program for grinding variable tooth pitches. CAD program for creating up to 250 custom tooth shapes. Fire extinguishing system is an oil retrofit kit with aerosol extinguishing generator. With electrostatic air extraction. Rjdpfx Asx Tct Tsfbjbt

Condition: good (used), Köhler Type: HKS 1500 The Köhler HKS 1500 salt spray chamber is an industrial testing device designed for corrosion testing according to international standards such as ISO 9227 (NSS, AASS, CASS). Rjdpswit Erofx Afbobt It is primarily used in the automotive and metalworking industries to test the resistance of materials and coatings to corrosive environments. Technical Features Model: Köhler HKS 1500 Test Volume: Approx. 1000 liters Chamber Type: Front- or Top-Loading Control: Touch panel for easy operation Temperature Range: Room temperature to approx. 50 °C Materials: Corrosion-resistant interior lining, e.g. B. Polypropylene Standards: DIN EN ISO 9227, VDA 233-102, DIN EN ISO 11997-3 This chamber enables both conventional salt spray tests and cyclic corrosion tests and can be individually adapted to specific testing requirements. Technical specifications for the salt spray cabinet: Test chamber material: Polypropylene RT - + 55°C Test chamber temperature range/salt spraying Heating/salt spraying indirectly via chamber walls Temperature range - condensate RT - + 50°C Temperature range - humidifier RT - + 75°C Heating indirectly via the test chamber walls. Temperature stability +/- 1.0 K Digital temperature control, resolution 0.1 °C (on plain text display) Digital control, heating circuit via electronic relay without power disturbances Saline supply: approx. 200 hours of continuous spraying or external Saline supply: automatic humidifier filling Fog generation: dual-fluid nozzle made of acrylic glass Air flow rate: 3.0 m³/h Precipitation rate controlled by electronic dosing pump Dimensions: Inside: Width 1030 mm, Depth 880 mm, Height 1100 mm Outside: Width 1200 mm, Depth 1000 mm, Height 2080 mm Electrical connection: Nominal voltage: 400V 3P/N 50Hz Pmax: 9800W Connected load: 3.0 KVA (salt spraying) (condensation) 2.0 KVA Compressed air connection Min. 4.5 bar, max. 8.0 bar Water connection (deionized water): Min. 2.0 bar, max. 6.0 bar Disposal: Mist outlet NW 32, Condensate outlet NW 32 Weight: 450 kg Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical specifications, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Electrician's workbench ESD workplace -Dimensions: 1500/750/780 mm -Conductive tabletop with Anka-Plast coating -for workplaces where electrostatically sensitive components and assemblies are processed. Rodob A Hk Uepfx Afbebt -Leakage resistance: according to DIN 51953

Condition: used, _____ Description: Year of manuf. : 2011 Control : Siemens 840 Dsl Turning diam. : 250 mm Rodpfjv S Dnksx Afbebt Spindle: Technology:Motortspindle Speed:6.000 rpm Power (max.):39 kW Torque (max.):460 Nm Clampingcylinder:Full-Clampingcylinder Workpiececlamping:3-Jaw chuck, SMW Autoblock, KNCS-NB-260-72 Toolcarrier I: Technology:Turret with 12 stations Taper:VDI 40 Tooldrive:6.000 rpm, 7,5 kW, 24 Nm Toolcarrier II: Technology:Drillingstation with Internal coolant supply Taper:Capto C8 In general: Movement in X/Z:1.180/525 mm Rapid travers in X/Z:60/30 m/min Equipment/Accessory: Positionsensor:Direct scales in X/Z Chipmanagement:Chip conveyor Coolingmanagement:Internal cooling unit with paperbeltfilter and high-pressure Toolmonitoring:ARTIS CTM Automation:Workpiecestorage, Circulation systems for Storage, Type L Oilmistseparation:Interface Electrostatic extraction prepared

Condition: used, Year of construction: 2001, Technical details: turning length: 300 mm x-axis: plan: 800 mm longitudinal traverse (z-axis): 300 mm control: Siemens 840D revolution per minute: Hauptantrieb: 20 - 5000 U/min Revolution driven tool (turret): 6000 U/min. revolution per minute: C-Achse: 0 - 100 U/min spindle bore: 79 mm Torque: Hauptantrieb: 200 Nm max. torque on the spindle: 240 Nm max. torque at clamping center: Werkzeugträger: 28 Nm m rapid motion - x-axis: 100 m/min rapid traverse Z-axis: 45 m/min tool turret - number of stations: 12 Stationen / Stations tool taper: VDI 40 Main spindle capacity: 27 / 20 kW spindle hours: 42.400 h operating hours - idle run: 93.728 h electrics - voltage/frequency: 3~ / 400V / 50Hz V/Hz interface: ja total power requirement: 50 kVA Weight approx.: 8,0 t dimension machine xH: 3,2 x 3,95 x 2,8 m dimension L-W-H: Späneförderer: 3400 x 1150 x 2180 mm Application: This vertical lathe is suitable for 2-axis machining (turning, drilling; milling, Y-axis) of chucked parts. Rbodpfsvamgxox Afbot Equipment: -High-pressure coolant unit BMF for 500 liters -Make Bürener chip conveyor with oil mist separator/industrial filter ifs/ IFM 1000CTV (electrostatic extraction) -Workpiece loading and unloading device with/for 20 stations -Power chuck Ø 225mm, foot switch -Clamping surface in the work area: W: 340 x H: 430mm with 7x T-slots according to DIN 650 -Hydraulics -6x various turning tool holders and 2x various tool holders (rotating) *

Condition: excellent (used), Year of construction: 2009, Perfect Binding Line, consisting of: Gathering Machine ZU 841.A - basic frame with 21 gathering stations - 19 standard feeders - 1 handfeeding station (covering 2 housing stations) - device for electrostatic fixation of three advertising medias Rjdpjvg Ad Tefx Afbjbt - integrated jogging station - Aircenter - reject unit AS 841 to the right - transfer channel as connecting unit to the binder Perfectbinder KM 473 - 26 clamps - handfeeding - main milling station - equalized milling station - notching station - micro-notching station - brushing station with roller brush - 2 Hotmelt spine gluing units - 1 Hotmelt side gluing unit - 3 premelters LH 375 - IR heating at curve - stream cover feeder SAL 411.A - scoring station for 4 scores - 2 pressing stations - gripper carriage delivery - laydown device Transport and Drying Line, incl. Ambaflex drying tower, incl. emergency delivery Three Knife Trimmer HD 153.P - copilot - right hand infeed - counter stacker - silicon spraying device - standard cutting cassettes 7 - 18 additionally available: Kolbus book block feeder with delivery belt Kolbus card gluer KK 841 PUR spine gluing unit with Nordson smelting unit Best for PUR cover 600L Kolbus destacker AE 360 Kolbus blocking unit VB 120 pallettizer Kolbus PL 770 or Kolbus PL 771

Condition: excellent (used), Year of construction: 2014, Manufacturer: Spinner Model: TC-400 Year of manufacture: 2014 Control: Fanuc 32iTB Max. bar capacity: Ø 52 mm Equipment: Short bar loader Spinner Servo-Load 80-1500V2 with support stand Rjdpfswwucusx Afbebt Control: Fanuc 32iTB with color LCD display/control panel 1 Drive motors for X/Z axes and spindle manufactured by GE Fanuc with digital AC technology, traversing paths X = 200 mm, Z = 515 mm. Main spindle up to 5,000 rpm / 52 mm; power 18 kW; torque 113 Nm (S6=40%). Main spindle as integrated motor spindle with water cooling, spindle nose A6. C-axis for spindle including software option 'Transmit' for face machining and 'cylindrical interpolation' for peripheral machining. Hydraulic hollow chuck cylinder. 12-position indexing turret for tool holders in accordance with DIN 69880/30 mm, 12 driven tool stations with turret for milling and drilling operations. Tailstock for TC400, MK4. Chip conveyor TC400 with enlarged L-shaped coolant tank, approx. 150 liters with centrifugal pump, 50 l/min, 3.3 bar. Parts catcher, tool setter arm, high-pressure pump, electrostatic air cleaner.

Year of construction: 2020, condition: new, Title Strassburger Filter SF400oDEC/30S Integra – Stainless Steel Plate and Frame Filter Press – Year 2020 – NEW / Unused Short Description For sale: unused, factory-sealed plate and frame filter presses from the renowned German manufacturer Strassburger Filter GmbH + Co. KG. The units are in brand-new condition, have never been commissioned, and remain in their original packaging from the factory. Manufacturer Strassburger Filter GmbH + Co. KG (Germany) Model / Type SF400oDEC/30S, Integra format Machine designation: FI6722 – FP PRE 1 Year of Manufacture 2020 Serial Number Among others: 032003303920 (additional serial numbers available) CE Marking Yes Condition Rbjdpfx Ajx Ihufefbst Brand new / unused Factory-sealed Never installed, never used for production Stored in warehouse Quantity Available 4 identical units available New Price Original price €94,000 per unit (Total value for 4 machines: €376,000) Design / Material All stainless steel Plate and frame filter press Gasketed plates Pharma / biotech specification Hydraulic closure incl. hydraulic unit CE-compliant Technical Data Plate format: 425 × 400 mm Number of filter chambers: 28 Total filter area: approx. 3.4 m² Total volume: approx. 13.6 liters (100%) Max. operating pressure: 6 bar Max. operating temperature: 95 °C CIP / SIP capable (cleaning up to 121 °C) Dimensions & Weight Length: approx. 1,649 mm Width: approx. 600 mm Height: approx. 1,145 mm Weight (filter frame): approx. 480 kg Weight (plate pack): approx. 120 kg Plate Pack 14 filter plates 13 filter frames 1 end frame 1 partition plate 28 filter layers per setup Hydraulics & Drive Hydraulic closure Hydraulic power unit included Motor power: 1.5 kW Electrical connection: 400 V / 50 Hz Solenoid voltage: 24 V DC Compressed air requirement: 3.0 bar Connections Product inlets and outlets: DN25 Vent / drain: DN15 Connections according to DIN 11864-2 Drip tray included Areas of Application Pharmaceutical production Biotechnology Chemical industry Pre-filtration Precipitation and clarification processes Location Germany Inspection by appointment Immediately available

Year of construction: 2023, condition: new, The cable granulator is widely used in copper scrap recycling to separate copper and plastic. The processing capacity is 100-150 kg/h. It can be crushed and separated without classification. It is the best choice for recycling copper scrap. Application V-S10 wire granulator machine is mainly used for processing copper and aluminum wires such as household wires, industrial wires, automobile wires and so on. Design and manufacture 99.99% excellent efficiency and reliability equipment, such as: Copper rice mill, air gravity sorting, electrostatic separation, pre-shredding, vibration screen, magnetic separation conveyor belt, self-cleaning dust separation. Technical Specifications Model V-S10 Power 17.8kw Range Rjdpepm E U Rsfx Afbsbt 0.1~30mm Weight 900kg Mea 1550*1500*2100mm Process capacity 100~150kg/h

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: 48300077, compressed air connection: 6 bar, total width: 17,000 mm, total length: 31,000 mm, total height: 2,000 mm, input voltage: 400 V, Equipment: compressor, For sale here are 2 Sitma 1150 W film wrapping lines, each upgraded with an extension for paper banderole processing. Both systems are fully functional and well maintained. The equipment includes (22/23) feeders, packaging module, 90-degree deflection, wrapping machine, cross stacker, banderole module (paper module), unwinder suitable for both paper and film, Robatec gluing unit, 3 Eltex electrostatic systems, 2 Schneider OZGA bundling units, and Buskro HP inkjet systems. The machine can process both film and paper rolls. The machines can be inspected in Hagen until 01.04.2026. Of course, the sale also includes a comprehensive spare parts inventory with original Sitma spare parts. Price on request. Rsdpox Hx Dzefx Afbobt A video of the machines in operation is available on request.