Used Emco 10 for sale (138)

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, turning length: 1,500 mm, turning diameter: 520 mm, spindle speed (max.): 3,200 rpm, travel distance X-axis: 280 mm, travel distance Z-axis: 1,055 mm, workpiece weight (max.): 1,200 kg, TECHNICAL DETAILS Swing over bed: 700 mm Max. turning diameter: 520 mm Spindle pitch: 1,500 mm Bodsv Hqntjpfx Aacoww Travel X1: 280 mm Travel Z1: 1,055 mm Travel Z2: 1,090 mm Control system: Siemens Sinumerik 840D Main spindle Spindle head: DIN 55026 A2-8 Clearance through the drawbar: 95 mm Inner diameter of front bearing: 160 mm Inner diameter of rear bearing: 150 mm Clamping cylinder diameter: 315 mm Speed: 750–3,200 rpm Power (S1/S6 40%): 37/54 kW Max. torque (S1/S6 40%): 470/687 Nm Max. workpiece weight in the chuck: 400 kg Center of gravity distance from chuck: 175 mm Max. workpiece weight between chuck and tailstock: 1,200 kg Counter spindle Spindle head: DIN 55026 A2-8 Drawbar clearance: 95 mm Inner diameter of front bearing: 160 mm Inner diameter of rear bearing: 150 mm Clamping cylinder diameter: 315 mm Speed: 500–3,200 rpm Power (S1/S6 40%): 17/25 kW Max. torque (S1/S6 40%): 324/478 Nm Tailstock Travel: 1,050 mm Min./Max. distance between spindle and tailstock: 320–1,370 mm Min./Max. Feed force: 50–2,000 daN Quill taper: MT 5 Feed rates Rapid traverse X1-X2-Z1-Z2 and counter spindle: 30 m/min Ball screw X1-X2, pitch: 40 x 20 mm Ball screw Z1-Z2, pitch: 50 x 20 mm Ball screw counter spindle, pitch: 50 x 20 mm Feed force X1-X2: 1,640 daN Feed force Z1-Z2: 1,640 daN Feed force counter spindle: 1,640 daN General overhaul and maintenance - Replacement of the X-axis ball screw (upper turret): 2011 - Replacement of the clamping cylinder (spindle no. 1): approx. 2018 - Bearings replaced on both spindles: 2011 - Overhaul of both turrets: ongoing EQUIPMENT - Counter spindle - 2 turrets with driven tools - Y-axis of the upper turret: starting at 50 mm - Driven tools: 2 straight + 2 angled - Holders: 2 in-hole + 2 on the surface - Clamping jaws: 2 hard base jaws - Complete machine documentation - Replacement turret (after complete overhaul)

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, Machine available IMMEDIATELY with a wide range of accessories ex works Mayrhofen for a bid Bedpfxenk Uabj Aacsww

Condition: good (used), Year of construction: 2001, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 820 mm, workpiece weight (max.): 1,000 kg, spindle speed (max.): 10,000 rpm, Includes accessories (approx. 70 SK40 tools) TECHNICAL DETAILS X-axis travel: 1,200 mm Y-axis travel: 800 mm Z-axis travel: 820 mm Feed and drive Working feed X/Y/Z: 10,000 mm/min Rapid feed X/Y/Z: 24,000 mm/min Working pressure S1 X/Y: 6,000 N Working pressure S1 Z: 11,000 N Table Table dimensions: 1,400 x 800 mm Number of slots: 7 Slot width: 18 mm Slot spacing: 100 mm Max. table load: 1,000 kg Spindle Taper DIN 69871: ISO 40 Spindle motor power (30 min): 26 kW Continuous power S1: 22 kW Speed range: 50 – 10,000 rpm Measuring system: indirect Tool changer Magazine positions: 30 Tool selection: double-sided Max. tool diameter: Ø 94 mm Max. tool length: 280 mm Max. tool weight: 6 kg Tool change time: 2.3 s Chip-to-chip time: 4 s Accuracy Positioning accuracy X/Y/Z: ±5 µm Repeatability X/Y/Z: ±1.5 µm Mean reversal error: 3 µm MACHINE DETAILS Total weight: 8,700 kg Height: 3,424 mm EQUIPMENT - Central high-pressure cooling system - Automatic base frame and workpiece washing system Bjdpswh T Rfefx Aacjww

Condition: good (used), Year of construction: 1988, functionality: fully functional, machine/vehicle number: 0-800002, CNC lathe, Emco 342 with FMB Turbo 3000 bar loader Year of manufacture: 1988 Functional: complete Bjdju Egggopfx Aaceww Description available: yes Machine description: Sinumerik 810T, FMB Turbo bar loader for 3 meter bars up to 42 mm in diameter (including collet set), turret with 8 stations, VDI20, max. speed max. 6000 rpm, including KSF chuck, clamping inserts and follow-on punch, air conditioning unit on the control cabinet Machine: • Width: 2275 mm • Depth: 2115 mm • Height: 1710 mm • Weight: 2400 kg • X-axis: 150 mm • Z-axis: 300 mm • Rapid traverse: 12 m/min Loader: • Width: 1000 mm • Depth: 3700 mm • Height: 1200 mm • Weight: approx. 500 kg Delivery ex works The offer is non-binding and subject to changes and errors in the technical data or equipment, as well as prior sale. Used machines are purchased as seen, with no warranty claims. Price ex works excluding packaging and insurance, unless otherwise agreed. Price plus statutory VAT. Payment is made before loading, as is usual for used machines.

Condition: used, Year of construction: 2013, Technical details: bar material dia.: 65 mm turning length: 644 mm turning dia. over bed: 600 mm turning diameter over slide: 430 mm y-axis: 100 (+-50) mm Bwedpfsphuwqjx Aacew turning speeds: 2x 5.000 1/min positive location each: 2x C-Achse, 0,001° Grad Sub spindle: ja/yes turret (x-stations): 2x 12 VDI 30 Pos. driven tools: 2x 12 Pos. turning speeds: 2x 4.000 1/min control: FANUC 18 iTB total power requirement: 30 kVA weight of the machine ca.: 8 t dimensions of the machine ca.: 3,5 x 2,5 x 2,3 m turning- milling center with Y-axis, collet device on main and subspindle, high pressure pumps 2x 14bar, parts catcher/conveyor, barloader ENTL 10-65, chip conveyor, lot of accessories approx. 54.500 hours "machine on", 30.500 h "automatic", 14.000 h "feeding" *

Condition: used, Year of construction: 1999, Technical details: turning diameter over bed: 340 mm turning diameter over support: 190 mm turning length: 700 mm centre distance: 700 mm revolution per minute: 55 - 2350 / 8 step mechanisch U/min spindle bore of work spindle: 50 mm tailstock quill adjustment:: 120 mm tailstock quill: MK3 mm max. torque on the spindle: 350 Nm max. workpiece weight -without tailstock: 50 kg total power requirement: 3,0 kVA weight of the machine ca.: 0,79 t dimension machine xH: 1,6 x 0,9 x 1,4 m Accessories: comparable in the picture 2x steady rest (1x closed and 1x open) various tips various lathe chucks and jaw pairs Bwodpfju Ixw Aox Aacsw *

Condition: used, Year of construction: 2007, Technical details: turning diameter: 220 mm turning length: 310 mm Bodpfx Aaowxvbzeceww total power requirement: 17 kW weight of the machine ca.: 3,3 t dimensions of the machine ca.: 2,25 x 1,63 x 1,94 m greates pass round over bed: 430 mm bore diameter: 45 mm centre distance: 687 mm slide travel radial ( X-axis ): 160 mm slide travel axial ( Z-axis ): 310 mm spindle turning speed - stepless: 0-6.300 U/min

Year of construction: 1982, condition: used, Technical details: z-travel: 260 mm pressure capacity max.: 49 - 7355 (Prüflast) N checking height: 260 mm workpiece weight: max. 160 kg throat: 200 mm interface: RS 232 voltage: 230V / 50Hz V total power requirement: 200 VA machine weight approx.: 250 (ohne Unterschrank) kg dimension machine xH: 0,7x 0,6 x 1,8 (mit Unterschrank) m The hardness tester with depth measurement operating mode is on sale with a base cabinet from Emco for hardness testers. The device is suitable for testing the following methods(Specifications according to manufacturer): Metals according to Brinell, Vickers, Rockwell Plastics testing according to DIN 53 456 Bwodpfx Aaju N Avxecjw Other materials for testing only after consultation with the manufacturer. Test loads: electronically controlled via microprocessor, DMC and DC motor for M4R-075 = 49 to 7355 N Test table height adjustable via handwheel; Ø 90mm Test bench mounting according to DIN 51 225 = Ø 25mm Operation and programming via control panel accessories: a few test tables and plates (comparable with the pictures) *

Condition: used, Year of construction: 2001, Technical details: turning diameter: 220 mm turning length: 700 / 665 mm total power requirement: 17 kW weight of the machine ca.: 2,6 t dimensions of the machine ca.: 2,63 x 1,98 x 1,94 m greates pass round over bed: 430 mm Part length max.: 510 Bwedpfew Dudxsx Aacjw slide travel radial ( X-axis ): 160 mm bore diameter: 45 mm

Condition: used, Year of construction: 2000, Technical details: turning diameter over bed: 600 mm turning dia. over face-slide: 260 mm turning length: 610 mm facing movement (x-axis): 160 mm longitudinal traverse (z-axis): 610 mm control: Siemens 810D revolution per minute: 1 - 6300 steples U/min max. torque on the spindle: 86 Nm spindle passage: Ø 42 mm external spindle dia. in forward position: Ø 80 mm feed motor: X/Z: 5000 / 7000 N rapid motion - x-axis: X/Z: 16 / 20 m/min tool turret - number of stations: 12 / VDI 30 tailstock taper ISO: MK4 tailstock adjustment: 500 (Hub) mm Main spindle capacity: 7,5 (100%=11kW) kW electrics - voltage/frequency: 3/PE ~ 400V und 50/60Hz V/Hz total power requirement: 20 kVA (11 kW) Weight approx.: 4,0 t dimension machine xH: 3,0 x 2,0 x 2,1 m Further technical specifications: C-axis Bwedju Ixwispfx Aacow Distance main spindle - tailstock: 805 mm Power chuck Röhm Ø 160 mm (without jaws), speed 7,500 rpm. Tailstock with live center Coolant device, coolant supply via tool turret Switch cabinet with cooling, Rittal type SK3393100 Workpiece collecting tray Machine lighting Accessories: 1x driven tool i.D. *

Condition: used, Year of construction: 2000, Technical details: turning diameter: 360 mm turning length: 520 mm total power requirement: 20 kW Bwjdpfowxvclex Aacjw weight of the machine ca.: 3,8 t dimensions of the machine ca.: 3 x 2 x 2 m

Condition: used, Year of construction: 2008, Technical details: turning diameter over bed: 600 mm turning dia. over face-slide: 540 mm turning length: 550 mm longitudinal traverse (z-axis): 800 mm facing movement (x-axis): 260 mm control: Fanuc 18i-TB spindle bore: Ø 73 mm bar material dia.: Ø 65 mm revolution per minute: 0 ... 5000 steples U/min max. torque on the spindle: max. 250 Nm rapid traverse in x-y-z axis: X/Z: 30 m/min. / Y: 12 m/min. rapid traverse c-axis: 1000 U/min. tool turret - number of stations: 12 (Sauter) operating pressure: 6,0 bar electrics - voltage/frequency: 3 x 400 / 50-60 V/Hz operating pressure: 6 bar total power requirement: 40 kVA Weight approx.: 5,7 t dimension machine xH: 2,2 x 3,4 x 2,4 m dimension swarf conveyor LxWxH: ca. 2,9 x 0,6 x 0,55 (0,38 to) m dimensions LxWxH: Spänewanne: ca. 1,6 x 1,3 x 0,25 (0,2 to) m transport measurements machine: ca. 3,3 x 1,9 x 2,2 m Bodpfevvtpxox Aacoww The machine has a C-axis, E-axis, Y-axis, and W-axis. Powered tools can be used in all positions. Distance between spindle and counter spindle = 1050 mm. Counter spindle: A2-6, travel distance 800 mm, spindle diameter 105 mm, torque 250 Nm. Control cabinet equipped with Rittal cooler With hinged chip conveyor Chip tray Compressed air gun The machine has NO lathe chucks on sale as is! *

Condition: used, Year of construction: 1995, Technical details: Bodpfx Aaevbhcdsceww x-travel: 600 mm y-travel: 400 mm z-travel: 400 mm table surface area: 800 x 400 mm range of revolution per miute: 63 - 3150 / 18 step U/min feed continuous: X/Y/Z: 8 - 800 / 8step mm/min. spindle taper: SK 4 spindle head swivable left - right: 90 ° quill stroke: 105 mm total power requirement: 5,3 kW weight of the machine ca.: 2245 kg machine dimensions LxWxH: 2,1 x 2,8 x 1,9 m Control screen replaced with new LCD. The milling machine is equipped with measuring system with digital display PROTOTRAK MX2. The X and Y axes can run cycles. (interpolation), the Z-axis is moved manually. Spindle with right/left travel Automatic tool clamping via control command Coolant device (without container) Chip collection tray Tool accessories (comparable in the photo) *