Center lathe

Emco EMCOMAT-17 D

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, spindle bore: 50 mm, EMCO lathe EMCOMAT 17D ex education in very clean condition. Specifications: - year of construction 2006 - turning diameter over the bed 340mm - turning diameter over the cross slide 190mm - distance between centers 700mm - speed 40-3000rpm variable in 4 steps - diameter of main spindle 50mm Dcsdpfx Acju N Dpmj Nog Accessories: - 3-jaw chuck with inner and outer jaws - 3-axis digital readout - electric diagram - multifix chisel holder with 3 holders - cooling system - machine illumination - rotating center - bedstop - machine feet

Condition: new, Center length ----- 750 mm Center height ----- 125 mm Turning diameter ----- 250 mm Passage of main spindle ----- 26 mm Bed width ----- 135 mm Spindle speed ----- variable 30-2200 rpm Dodpeq E I Avofx Ac Necg Frequency motor ----- 1.1 kW INCLUDING * Delta frequency switch * Automatic longitudinal and transverse feed * Thread cutting clock * 3 chuck 125 mm * 4 chuck 125 mm * Clamping plate * Fixed spectacles * Guiding glasses * Back plate * Back plate * Box with various tools Option * Base cabinet

Condition: new, Machine according to DIN 8605: lathe with increased accuracy. Tip width: 700 mm Peak height: 170 mm Circulating diameter over bed: 340 mm Dedpfx Acjdctnbo Necg Circulating diameter over flat slide: 190 mm Bed width: 260 mm Laengs schlitten: 600 mm Shifting path cross slide: 220 mm Shifting path upper slide: 110 mm Flat slide: 410 mm Flat slide width: 150 mm Guide load-length bed slide: 380 mm Rotary chisel cross-section: 20x20 mm Center of rotation distance - Upper slide: 34 mm Swing range upper slide (Support): 60/120° Main spindle: Spindle connection DIN 55029 (Camlock): S 5 Spindle bore: 50 mm Inner cone according to DIN 7178: 1:22 Spindle diameter in the front bearing: dia. 70 mm Max chuck diameter: 200 mm Max. washer diameter: 200 mm Spindle speeds: 40-3000 rpm Speed control: Stepless mechanical speed levels: 4 Main drive: Power at 40% ED: 5.3 kW Max rated torque a. d.Main spindle: 640 Nm Feed: 20 (28) Laengsvorschuebe Z: 0.045-0.787 mm/U 20 (28) Plan vorschuebe X: 0.023-0.406 mm/U Thread: 20 (28) metric thread (basic): 0.4 - 7.0 mm 32 inch thread (with option Raed replacement D3Z200): 56 - 4 Gg/inch 28 Module thread (with option Raed replacement D3Z200): 0.2 - 3.5 32 diam. Pitch thread (with option Raed replacement D3Z200): 112 - 8 Tailstock: Pinole diameter: 50 mm Indoor cone of the pinole: MK 3 Pinole stroke: 120 mm Side adjustment: x 13 mm Zulessige Werkstueckweights

Condition: ready for operation (used), Year of construction: 2022, travel distance X-axis: 650 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 530 mm, table load: 500 kg, overall weight: 10,000 kg, spindle speed (max.): 18,000 rpm, spindle motor power: 15,000 W, number of slots in tool magazine: 60, number of axes: 5, This 5-axis Mazak VARIAXIS C 600 was manufactured in 2022. It features a table size of 730 x 450 mm and impressive travels of 650 mm in the X-axis, 550 mm in the Y-axis, and 530 mm in the Z-axis. The machine is equipped with a spindle speed of 18,000 rpm and a tool magazine that holds 60 tools. If you are looking to get high-quality machining capabilities, consider the Mazak VARIAXIS C 600 vertical machining centre we have for sale. Contact us for further details. • Control: Smooth X • Table size: 730 x 450 mm • Through-spindle coolant: 20 bar • Number of pallets: 1 • Table type: T-slot table • Capability: Continuous simultaneous 5-axis machining Additional equipment • Renishaw probe • Remote handwheel • Air blow on spindle flange Technical Specification Taper Size ISO 40 Dcedpjyxdcgofx Ac Njg

Condition: like new (used), functionality: fully functional, Weiler Commodor Lead and Feed Screw Lathe with 3-axis K&C Digital Readout, newly overhauled, with acceptance protocol for tolerances equivalent to new machines. Technical Data: >> Machine Serial No.: 2268-87 >> Centre Height: 180 mm >> Distance Between Centres: 1000 mm >> Spindle Speeds: from 13 to 2000 rpm >> Spindle Bore: 56 mm >> Short Taper Spindle Nose DIN 55029 Camlock >> Tailstock Morse Taper 4 >> Feed Rates: 0.026 to 0.888 mm/rev >> Thread Cutting Capability: Metric, Inch, Module, and Diametral Pitch >> Metric Thread Pitches: 0.35 to 12 mm >> Weight: approx. 1500 kg >> Spindle Brake can be engaged >> Drive Power: 2.0/4.0 kW >> Dimensions (LxHxD): 2.2 m x 1.5 m x 1 m Equipment and Accessories: >> 3-axis K&C Digital Readout, new, with 12-month manufacturer’s warranty and manual >> NEW 3-jaw chuck, 200 mm, with 2 sets of jaws >> Multifix size B with 3 new tool holders >> Bed stop >> Machine feet >> Coolant system Dedpfjymznhsx Ac Nscg >> LED machine light Safety Features: >> Electronic spindle guard >> Spindle brake >> 2 emergency stops Optional: Lead and feed screw covers available on request About the machine: For sale is a Weiler Commodor lead and feed screw lathe in geometrically overhauled condition. The ways have been reground or hand-scraped. Acceptance is according to inspection protocol. Finished in 2K gloss white paint. Multifix toolpost and chuck are new. For safety: The machine is equipped with a brake motor, electronic spindle guard, and two emergency stops, making it an as-new lathe. Even at high spindle speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is extremely user-friendly and is capable of producing ground-like surface finishes. Take advantage of the opportunity to inspect the machine under power on-site and see its condition for yourself.

Condition: new, turning diameter 360 mm turning length 1000 mm Dcjdpsw U U Tmofx Ac Njg swing diameter over bed slide 360 mm centre height 180 mm turning speeds 70-2400 U/min total power requirement 2,2 kW weight of the machine ca. 680 kg dimensions of the machine ca. 2000x1500x900 mm

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, Emcomat Emco EM20D Lead and Feed Lathe, built in 1995, in excellent condition, CE compliant! Technical specifications: >> Year of manufacture: 1995 >> Center height 200 mm >> Swing over bed 400 mm >> Swing over cross slide 250 mm >> Turning length: 1000 mm >> Spindle speed: 4 speed levels, continuously variable from 35-3000 rpm >> Quill stroke 120 mm >> Tailstock: MT3 >> Spindle bore: 50 mm Dsdpfxjwag Ste Ac Nscg >> 20 longitudinal feeds 0.045 / 0.787 mm/rev >> 20 cross feeds 0.023 / 0.406 mm/rev >> Space requirements / installation dimensions approx. length 1.900 x depth 0.9 x height 1.3 meters >> Weight approx. 850 kg Accessories and equipment: >> 3-axis position indicator >> 1 piece Three-jaw chuck with 1 set of jaws >> Tool holder with 3 pockets >> Chip return wall >> Coolant system >> Bed stop About the machine: Offered is an Emcomat 20D centerline and feed spindle lathe, built in 1995, in lightly used condition. The machine is fully functional. All slides run very smoothly and evenly. The bed guides are in very good condition. Take advantage of the opportunity to view this machine on-site under power and see for yourself its condition.

Condition: excellent (used), Year of construction: 2009, L & Z Lathe (used) Manufacturer: Knuth Model: DM 1000 A Year of manufacture: 2009 Centre height: 180 mm Centre distance: 1000 mm Swing over bed: 360 mm Swing over cross slide: 240 mm Swing in gap: 600 mm Spindle bore: 56 mm Dodpfjy Axwgsx Ac Njcg Spindle speed range: 30 – 1600 rpm Tailstock taper: MT 4 Quill diameter: 60 mm Quill stroke: 130 mm Motor power (spindle motor): 5.5 kW Bed width: 290 mm Machine weight: 1,500 kg Space requirements approx. L 2200 mm x W 1000 mm x H 1600 mm 3-jaw chuck 250 mm incl. jaws Multifix toolpost, size B incl. insert 3-axis digital readout (Knuth) Chip tray Coolant system Faceplate Fixed steady Travelling steady Machine feet The machine is in good condition and ready for immediate use. Forklift available, free loading onto truck Affordable shipping possible Location of the machine: 48477 Hörstel

Condition: used, Year of construction: 2001, gebraucht 2001 010191 prompt, Zwischenverkauf v Deutschland 24500 € 1 320 mm 650 mm 160 mm 40 mm 192 mm 205 mm 5 5 MK 16 48 - 2500 1/min 24 0.02 - 0.63 mm/U 0.006 - 0.2 mm/U 0.25 - 8 mm 80 - 2 Gänge/" 0.2 - 4 200 - 5 150 mm Dodpfx Acjyxxygs Njcg 100 mm 40 mm 3 MK 85 mm 2,4 / 3 kW 1582 mm 715 mm 1245 mm 720 kg Heidenhain 3-axis digital readout NEWRöhm 3-jaw chuck, 160 mm diameter, with internal and external jaws Quick-change tool post with one rectangular insert and one round insert Quick-release collet chuck with collets from 3 to 30,5 mm Live centre Drill chuck Chuck guard Lead and feed screw guard Motor brake Coolant system Mounting feet Operating instructions in German with CE declaration of conformity

Condition: ready for operation (used), Year of construction: 2008, operating hours: 10,459 h, travel distance X-axis: 1,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: FANUC, controller model: 18i, number of axes: 4, This 4-axis EMCO MC 120-60 vertical machining centre was manufactured in 2008. It features an X-axis travel of 1200 mm, Y-axis travel of 600 mm, and Z-axis travel of 500 mm. The machine is equipped with a Fanuc 18i control unit and a tool magazine with 30 stations. It includes a Lang Eco Compact clamping system. If you are looking to get high-quality machining capabilities, consider the EMCO MC 120-60 machine we have for sale. Contact us for further details. • Quantity: 2 machines (offered together) • Price: 30,000 € for both machines • 4th axis: Yes, mounted • Tool magazine: 30 stations Dsdpfsyxnmvex Ac Njcg Additional equipment • Chip conveyor • Band filter • Automation: Lang Eco Compact 10 (fully functional) • Tool holder package SK40 • 10 vices • Custom-made wooden floor grating for ergonomic loading Technical Specification Taper Size SK 40