Used Est Ticino for sale (34,578)

Condition: excellent (used), Year of construction: 1996, spindle bore: 160 mm, Swing over bed Ø 1040 mm Swing over cross slide Ø 710 mm Swing in the gap Ø 1580 mm DBC Turning Length Bsdpfx Aextbf Ejacoww 3000/4500 mm Gap length 1500 mm Spindle bore 160 mm Spindle power 40 kW Bed width 800 mm Spindle taper 6 Mk Workpiece weight 3500 Speeds / ranges 800 Rpm Feed rate X-Axis 10000 mm/min. Feed rate Z-Axis 10000 mm/min. Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1990, Ref. -No.: 10590 Manufacturer: EST TICINO Type: 520 x 1500 Year of construction: 1990 Type of control: Konventionell Storage location: Halberstadt Country of origin: Italy Machine-No.: 0012XXXX Bwsdpsxmfagjfx Aacsw Chuck diameter: 4 x Ø 1700 mm Turning Length: 1500 mm Turning Diameter Over Bed: 1040 mm Spindle Speeds: 600 RPM Centre Distance: 1500 mm Spindle Bore: 160 mm Spindle power: 35 kW Turning diameter over cross slide: 710 mm Machine length: 5000 mm Machine width: 2350 mm Machine Height: 2100 mm Weight Of The Machine Ca.: 8,5 t Max. swing diameter: 1880 mm Further information: - Made of cast iron - Hardened and ground guideways The machine can be viewed under power by appointment.

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, Swing over bed 1,300mm, over cross slide 1.000mm, swing in gap 2,100mm, center distansen 1,500mm, 2,350mm with open bed. Spindle bore 128mm, 450 Rpm, 50 Kw, Chuck 800mm, 4-jaw plate 900mm. Fagor CNC, weight ca 12.000kg Bwedpexqp I Nefx Aacew

Condition: used, Year of construction: 1976, turning diameter over cross slide: 470 mm, spindle bore: 130 mm, turning length: 1,500 mm, quill stroke: 300 mm, quill diameter: 130 mm, bed width: 600 mm, rotational speed (max.): 600 rpm, quill mount: MK 6, Manufacturer: EST Ticino Model: ET-BM 400 Turning length: 1,500 mm Swing over bed: Ø 800 mm Swing over slide: 470 mm Swing over gap: Ø 400 mm Gap length: 750 mm Spindle bore: 130 mm Bjdpfxow Ewarj Aacoww Spindle power: 15 kW Bed width: 600 mm Quill diameter: Ø 130 mm Quill stroke: 300 mm Spindle mount: 6 MK Spindle speed: 600 rpm Dimensions (approximate) Length: 4,500 mm Width: 1,800 mm Height: 1,800 mm Weight: 5,200 kg With accessories: - Safety equipment - Faceplate, four-jaw chuck, clamping jaws, tool holder, centers, drill chuck, tools Please submit inquiries by email only. All information has been provided to the best of our knowledge. Subject to change. This offer is directed exclusively to businesses within the meaning of § 14 BGB. The sale is made with exclusion of any warranty. This exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of duty by the seller or for injury to life, body, or health. For more information, please visit the Witzenmann GmbH website under the sections “Imprint”, “Terms and Conditions”, and “Data Protection”.

Condition: excellent (used), - Digital display. - Accessories available. Working range Center height 520 mm Center width with closed bed 2000 mm Center width with open bed 3200 mm Width of cranking with open extended bed 1200 mm Turning diameter above the cross slide 710 mm Turning diameter above the bed 1040 mm Turning diameter in the crank 1780 mm Headstock spindle bore 132 mm diameter of the spindle in the front bearing 240 mm spindle nose D1-11" Camlock Torque 1100 Kgm Bed and bed slide bed width ("Meehanite" cast iron) 600 mm Length of bed slide guides 900 mm Width of the cross slide 420 mm length of the cross slide 1050 mm Travel of the cross slide 770 mm width of the rotatable top slide 270 mm Length of the rotatable top slide 650 mm Travel of the rotatable top slide 400 mm Tailstock Diameter of the quill - with driver 130 mm quill taper 6 CM/MK Quill adjustment 300 mm Miscellaneous Max. Weight capacity at the faceplate with center of gravity at 200 mm 2500 kg Max. weight absorption between centers 4500 kg Passage of fixed steady rest 200 - 500 mm Coolant pump (75 l/min) 0.2/0.15 HP/kW Bedpfx Aajikfbdecsww total length 4500 mm with upper bed extension 5700 mm height 1550 mm weight 9,1 t

Condition: good (used), Year of construction: 1987, turning diameter over cross slide: 810 mm, spindle bore: 130 mm, turning diameter: 1,140 mm, turning length: 7,500 mm, quill stroke: 300 mm, total length: 7,500 mm, total width: 2,300 mm, total height: 1,650 mm, bed width: 600 mm, Please note: not original pictures its only 3000 length not 5000 mm   3 Guide way construction 2 Axis HeidenHain Digital readout Feed in 3 directions all tool post slide Central lubrication   Work load flying in chuck 2500 kg Work load NOT supported 8500 Kg Work load supported 10000 kg   Optional 4 chuck approx. 1200 mm Optional 4 chuck approx. 1500 mm Optional package with 3 steady rest fixed model from  .... to ....  Bedpsv S Dp Ijfx Aaceww Turning length: 5000 / 7500mm Turning diameter bed Ø: 1140mm Turning diameter slide: 810mm Turning diameter pit Ø: 1500mm Pit length: 2500mm Spindle bore: 130mm Bed width: 600mm Quill: 130Ø Quill stroke: 300mm Spindle mount: 6Mk Power: 25kW Speed: 9 - 900rpm Length: 7500mm Width: 2300mm Height: 1650mm Weight: 12000kg

Condition: new, Speed relay - new, available sizes: ALNICO 01 (01T) Bsdpfx Aajwa Sngjcoww ALNICO 02 (02T) ALNICO 04 (04T ALNICO 11

Condition: used, Tenoning spindle 1 St Number of milling agregates 3 St. Spindle diameter 50 mm weight ca 7.500 kg Gubisch type EST-H 2000/2 ----- Machine still in use and can be inspected! Manufacturer's description: ----- single-sided angle combination for window and door production consisting of tenoning and slotting machine, angle transfer and trimming machine cross-cut saw: ----- P = 3 kW U = 3000-1 Saw diameter: 400 mm Bwjdpsxmk Dwefx Aacew Flange diameter: 80 mm Adjustment: horizontal: manually adjustable, readable via mechanical digital display Length stop LAS ----- Adjustment: manual Length: extended to 3.2 m Slotting unit (cross processing) ----- P = 9.2 kW U = max. 4500 but depends on your tools and is adjusted accordingly Clamping height: 300 mm Useful height: 300 mm Shaft diameter: 50 mm Largest tool diameter: 400 mm max., 240 mm min. Adjustment: vertical Adjustment range: vertical 210 mm under table Number of tools: 3 tool sets of 100 mm each provided by customer 0-height 10 mm shortest workpiece: 320 mm + tenon narrowest workpiece: 48 mm widest workpiece: 170 mm 1st profile spindle ----- Spindle position: vertical right Function: profile production and automatic synchronization P = 9.2 kW U = 6000 rpm Clamping height: 100 mm Effective height: 100 mm Diameter: 50 mm Flight circle diameter: 100 - 240 mm Adjustment range: horizontal 70 mm, tool 0-height 10 mm Number of tools: 1 a 100 mm Clamping length max. 2nd profile spindle ----- Spindle position: vertical right Function: profile production P = 9.2 kW U = 6000 rpm Clamping height: 300 mm Useful height: 300 mm Diameter: 50 mm Flight circle diameter: 100 - 240 mm Adjustment range: horizontal 70 mm, vertical 100 mm for tool 0-height 10 mm 3rd profile spindle ----- Spindle position: vertical right Function: profile production P = 9.2 kW U = 6000 rpm Clamping height: 300 mm Effective height: 300 mm Diameter: 50 mm Flying circle diameter: 100 - 240 mm Adjustment range: horizontal 70 mm, vertical 100 mm for tool 0-height 10 mm Number of tools: 3 a 100 mm clamping length max. 4th profile spindle (glazing bead sawing unit) ----- Spindle position: horizontal top, right P = 3.0 kW U = 3000 rpm Flying circle diameter: 250 mm Clamping flange holder: 60 mm diameter Hydraulic adjustment: automatic up/down, forwards/backwards for 1 basic height and 1 basic depth Further technical details ----- Clamping table Slotting unit ----- On ball guide bush and roller guides Manual swivel range: 60 degrees in both directions Speeds: 0 - 28 m/min. infinitely variable 4 speed ranges fast feed in front of slotting unit slow feed in cutting area adjustable fast feed for transfer fast return Counter beam: Counter beam changes automatically with spindle stroke Transfer type to profile area: automatic Operating mode: Single part production, frame-by-frame production and series production possible Longitudinal profiling ----- Width adjustment: against man. Turret stops Differences of up to 30 mm are absorbed by the pneumatic spring-loaded fence Range: 48 - 170 ...

Year of construction: 2016, condition: used, New: No Empty weight: 1 kg Bjdpjxhvkrefx Aaceww Part suitable for: trucks Type number: 6070010004, 0034000760, EST54 EST54 Occ besturingseenheid intarder IT3 EST 54 MAN OEM : 6070010004, 0034000760, EST54 Article nr.: V155010148-veiling Used control unit intarder IT3 EST 54 MAN

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 1,451 h, load capacity: 2,500 kg, lifting height: 5,900 mm, free lift: 1,700 mm, fuel type: electric, mast type: triplex, construction height: 2,800 mm, battery capacity: 620 Ah, battery voltage: 72 V, fork length: 700 mm, overall weight: 6,100 kg, empty load weight: 6,100 kg, total height: 2,800 mm, total length: 1,700 mm, total width: 3,150 mm, maximum load weight: 2,500 kg, fuel: electricity, Equipment: adjustable boom, front guard, lighting, pallet forks, The battery has been reconditioned and has an efficiency of 81%. Only 1451 hours. We sell forklifts after a full service. Bjdpsxrd Iyjfx Aacjww Prepared for the end user. Ready to use. We can arrange transport within Europe and worldwide.

Condition: good (used), functionality: fully functional, Year of construction: 2022, operating hours: 102 h, load capacity: 1,200 kg, lifting height: 2,700 mm, fuel type: electric, Electric high-lift stacker EP Equipment, EST 122, year of manufacture 2022, 102 operating hours, lifting height 2700 mm, 2x 12V batteries, load capacity 1200 kg, electric drive, weight 535 kg, serial no. 4311306436, incl. charger. Bwedpfjxftbpox Aacjw

Condition: used, pressure 160 t passage width / mm stroke / mm Working height 800 mm total power requirement 15 kW Bwsdjiulkqopfx Aacow weight of the machine ca. 11,8 t - Table size: 1000x1000mm - Distance table/ram, large stroke above, gain. above: 800mm extra information Removable table

Condition: used, Transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer -Manufacturer: Müco, single-phase transformer type EST 160 -Power: 160 VA Bodsub D Scspfx Aacsww -Voltage: 230V 50/60Hz -Technical data: see photo type plate -Dimensions: 100/80/H100 mm -Weight: 2.3 kg

Condition: excellent (used), Year of construction: 2009, CNC for complete processing of door frames / jambs , either or adjustable door frames in DIN norm Working width max 3.000 mm Working width min 480 mm Workpiece thickness max 98 mm Workpiece width max 280 mm Aggregates per side 2 Bwsdpfxjw Sd Uue Aacsw Saw aggregates per side 1 diam. 400 mm Drilling supports per side 1 Drills per side 5 Aggregates longside 1 Milling aggregate with 2 spindles Aggregate tiltable in angle 45° Angle adjustment - programmable controller Width adjustment - programmable controller Conformity marking - CE mark Weight 2.500 kg

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 5,346 h, load capacity: 4,000 kg, lifting height: 4,500 mm, fuel type: electric, mast type: duplex, construction height: 2,950 mm, drive type: Elektro, Four-way side loader Mast type: Duplex Bsdpfsvvpuwsx Aacoww Technical condition: good Fork positioner,

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 1,451 h, load capacity: 2,500 kg, lifting height: 5,900 mm, free lift: 1,700 mm, fuel type: electric, mast type: triplex, construction height: 2,800 mm, battery capacity: 620 Ah, battery voltage: 72 V, fork length: 700 mm, overall weight: 6,100 kg, empty load weight: 6,100 kg, total height: 2,800 mm, total length: 1,700 mm, total width: 3,150 mm, maximum load weight: 2,500 kg, fuel: electricity, Equipment: adjustable boom, front guard, lighting, pallet forks, The battery has been reconditioned and has an efficiency of 81%. Bwjdpjxl D Uyefx Aacsw Only 1451 hours. We sell forklifts after a full service. Prepared for the end user. Ready to use. We can arrange transport within Europe and worldwide.

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: C535, spindle bore: 102 mm, turning length: 2,000 mm, turning diameter over bed slide: 554 mm, center height: 284 mm, spindle speed (max.): 1,800 rpm, No reserve price – guaranteed sale to the highest bidder! Payment deadline for the machine is 20/11/2025! Bidding obligates prompt collection between 01/12/2025 and 05/12/2025! TECHNICAL DETAILS Bwodpfoxm Sm Hex Aacow Swing diameter over cross slide: 370 mm Swing diameter over bed and carriage wings: 554 mm Swing diameter in the gap: 830 mm Turning length: 2,000 mm Centre height (over bed): 284 mm Length in front of face plate: 196 mm Spindle centre height from floor: 1,238 mm Max. working length between centres: 2,152 mm Maximum spindle speed: 1,800 rpm Centre distance: 2,032 mm Spindle nose: D1-11 CAMLOCK Spindle bore taper: No. 5 MT Spindle bearing diameter: 145 mm Spindle bore: 102 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 6,000 x 1,800 x 1,800 mm Total weight: 4,250 kg EQUIPMENT Toolpost

Condition: used, Used Westfalia model CSA1-06-475 stainless steel clarifier centrifuge. Self cleaning bowl in steam sterilizable design. Internal pressure rated 1.5 bar pressure at 127 deg.c. Capacity rated approximately 13 litre. Unit includes 1.5kw, 1415rpm drive. All mounted on skid. Includes tools Bsdpfxsxrb A Uo Aaceww

Condition: used, Year of construction: 1985, functionality: fully functional, machine/vehicle number: 9/0002A/00053, SPECIFICATION Centre height 315mm Distance between centres 1500mm Swing over bed 635mm Swing over cross slide 390mm Spindle bore (max. bar dia) 115mm Spindle nose mounting D1-11 Camlock Taper in spindle nose and tailstock barrel No. 6 Morse Swing in gap 900mm Bwodoxtnvqepfx Aacjw Width of bedways 480mm Total travel of cross slide 380mm Total travel of top slide over bedways 165mm Total travel of tailstock barrel 190mm Spindle speeds (24) 6.3 – 1250rpm Drive vee belt and clutches Spindle motor 15kW Whitworth threads (88) ¼ - 112TPI Diametral threads (41) 1-60DP Metric pitches (70) 0.2 – 112mm Module pitches (37) 0.3 – 24 MOD Machine in Metric execution   MACHINE EQUIPPED WITH Sino 2 axis DRO system 3 jaw chuck Quick change toolpost and 3 off toolholders High speed threading unit Bedstop Rotating centre Stationary steady Rapid power traverse to saddle Lighting Coolant system Chuck guard

Condition: used, Year of construction: 2017, functionality: fully functional, Incoming: Presto CC 40 M baler with lifting and tipping device Technical data: Bwsdpfexuq E Dsx Aacow Manufacturer: Presto Model: CC 40 M Year of manufacture: 2017 Pressing force: 40 t Cycle time: 34 s Drive power: 15 kW Feed opening: 1080 x 1100 mm Feed volume: 0.85 m³ Tying: 4-fold, polyester strapping, manual Throughput capacity at bulk densities of: 35 kg/m³: 1.8 t/h 60 kg/m³: 2.5 t/h 100 kg/m³: 3.1 t/h Bale dimensions: 750 x 1100 mm Bale weight: 400 kg Dimensions (LxWxH): 3650 x 1590 x 2010 mm Machine weight: approx. 3800 kg Materials: paper, cardboard, film Note: Fully automatic channel exit control, lifting and tipping device suitable for large waste containers (MGB) 660, 770 and 1100 L. Please note: All technical data is based on the manufacturer's information. No liability is accepted for the details provided or for possible errors. The offer is subject to change, prior sale reserved, and may be revoked at any time. Viewings can be arranged by appointment. Sale is ex works, prepayment required, without warranty or guarantee.

Condition: excellent (used), functionality: fully functional, fuel tank capacity: 27,000 l, overall weight: 6,946 kg, empty load weight: 6,946 kg, Year of construction: 2018, machine/vehicle number: S27, Western Global S27 Tank Container / Transtainer (for diesel fuel storage) - Capacity: 27,000 litres - Dimensions (mm): 6058 x 2438 x 2896 - Fork pockets - Twistlocks on upper and lower corners - Pump cabinet with sliding door - 70 litres per minute pump capacity, 230 Volt Bwsdpfx Aajxt Icwocew - 8 metres of hose on hose reel with automatic nozzle Detailed pictures on request Complies with: - CSC, ISO fuel tank container - ULC, UL142, CAN/ULC-S601

Condition: excellent (used), Disc valve, butterfly valve, ball valve, butterfly valve, shut-off valve, directional control valve -Manufacturer: Festo, solenoid valve, original packaging -Type: MVH-5-1/4 B -Operating pressure: 2-10 bar -Number: 2 solenoid valves available -Price: per piece -Dimensions: 160/60/H35 mm Bwsdpsb A Tbxofx Aacow -Weight: 0.4 kg/piece

Condition: used, Used edible oil refinery with capacity 150 tonnes/day of edible oils. Bodpfxow U A H Uj Aacsww Plant includes (3) GEA type RSB100-01-076 separators that can produce 300 tons/day, but the rest of the plant is maximum 150 tons/day. Refinery can process soya, rapeseed, peanut; and also sunflower and corn oil because it includes winterisation step for waxes separation. Major equipment / sections include:- neutralisation, caustic soda dosing, separation for dewaxing, filtration, deodorisation, biomass boiler, water treatment system.

Condition: excellent (used), functionality: fully functional, fuel type: diesel, fuel tank capacity: 8,745 l, color: white, overall weight: 3,700 kg, empty load weight: 3,700 kg, Year of construction: 2020, machine/vehicle number: 100TT-IMDG, Western Global 100TT-IMDG Tank Container / Transtainer (for transport and storage of diesel fuel) 4 units available - Capacity: 8,745 liters - Dimensions (mm): 2,991 x 2,438 x 2,438 - Forklift pockets - Twistlocks on upper and lower corners - Pump cabinet with doors - Pump capacity: 70 liters per minute, 230 Volt - 15 meter hose with automatic nozzle Bedpfx Aaext H I Esceww Complies with: - CSC ISO fuel tank container - ADR and IMDG - RID, ULC, UL142, UN, USDoT, TIR

Condition: good (used), Disc valve, butterfly valve, ball valve, butterfly valve, shut-off valve, gate valve -Solenoid valve -Connection: 1/4" inch Price: per piece Quantity: 9 available Bwsdpeb A Sdgofx Aacsw -Weight: 0.5 kg