Sliding bed lathe EST TICINO - ET-BM-CT

Est Ticino ET-BM-CT 520

Condition: ready for operation (used), controller model: Haas, empty load weight: 12,000 kg, total length: 5,950 mm, total width: 3,048 mm, total height: 2,200 mm, swing diameter over cross slide: 2,000 mm, Grote doorlaat toolroom draaibank Draaibank met dubbele klauwplaat Spanenafvoerband CNC Hollow Spindle Slant Bed Oil Country Lathe Swing over bed: 1350 mm Swing over cross-slide: 400 mm Dia of spindle bore: 270 mm!! Power on the spindle: 55 HP Number of speeds: 1 > 500 rpm Dkedpfswu Ipijx Abueh

Condition: ready for operation (used), Year of construction: 2003, Weiler E50 x 1000 precision lathe (2003) Manufacturer: Weiler Type: E50 x 1000 Dkjdsxd Tikepfx Abujh Year of manufacture: 2003 Condition: good, used, under power Operating hours: 43.000h Technical data see pictures. Included in delivery: - Original documentation - Rota S Plus 250-62 - Bezel - Parat 4 compartment tool turret

Condition: used, max. wheel diameter 180 mm gear width 45 mm max. module 4 min. module 0,5 Dedpfxeu Uu S To Abuskh stroke length max. 0 - 52 mm spindle taper innen MK 4 table diameter 160 mm table bore diameter 75 mm no. of strokes 355 - 630 Hub/min feed range 0,008 - 0,4 mm/Hub dimensions of the machine ca. 2,30 x 1,50 x 2,36 m power capacity 6 kW weight of the machine ca. 2.500 kg Year of construction: Approx. 1970

Condition: good (used), turning diameter over cross slide: 380 mm, spindle bore: 70 mm, turning diameter: 640 mm, turning diameter over bed slide: 900 mm, Characteristics: Length between points: 2.000mm Diameter admitted on bed: 640mm Diameter admitted on carriage: 380mm Diameter admitted on neckline: 900mm Shank pitch: 70mm Includes: 400mm 3-jaw chuck 390mm 4 independent jaw chuck Open steady rest and closed steady rest Dksdpjudh Slefx Abujh Quick-change toolholder with 4 tool holders.

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, turning diameter over cross slide: 490 mm, spindle bore: 155 mm, center height: 400 mm, turning length: 3,000 mm, spindle speed (max.): 1,250 rpm, spindle speed (min.): 6 rpm, bed width: 700 mm, Turning diameter in gap: 1,050 mm, rotational speed (max.): 1,250 rpm, overall weight: 7,500 kg, three-jaw chuck diameter: 630 mm, ZMM Lathe CU800x3000, 2011, very little used, in excellent condition Specifications: Swing over bed: 890 mm Distance between centers: 3000 mm Spindle bore: 155 mm Bed width: 700 mm Dodpfxexyf Ecj Abuskh Spindle speed: 6.3–1250 rpm Weight: approx. 7500 kg Compliant with ARBO/CE Machine equipped with: • 2-axis digital readout • BISON 3-jaw chuck 630 mm • BISON 4-jaw independent chuck 800 mm • 2 x fixed steady rests with roller fingers • 1 x travelling steady rest • Electrically adjustable tailstock • Tool post with 4 holders • Coolant system • Machine lighting

Condition: reconditioned (used), Year of construction: 1992, functionality: fully functional, center height: 150 mm, grinding length: 620 mm, center width: 680 mm, grinding wheel diameter: 350 mm, total width: 500 mm, Condition of the machine: The machine is currently in a used, non-overhauled condition. The following work carried out on the machine: - Complete disassembly of the entire machine except for the guides - Replacement of all sealing and wear parts of the entire machine - Replacement of the infeed spindle of the X-axis - Replacement of the main bearing of the workpiece spindle - Replacement of grinding spindle - All machine assemblies are restored to as-new condition Geometry: - Scraping of the X-axis guide - Scraping the Z-axis guide Dodorz Nfljpfx Abujkh - Grinding the X-axis table - Grinding the Z-axis table - Grinding the upper tables - Grinding of the assembly housing (workpiece headstock, grinding headstock and tailstock) - Creation of measurement report for TSCHUDIN cylindrical grinding machine Painting: The main assemblies are repainted, the rest of the machine retains the original paintwork Electronics: The complete electronics of the machine are checked, tested and defective switches and cables are replaced

Condition: good (used), Year of construction: 1963, Vertical lathe JUNGENTHAL Type: DK 1400 built in 1963 with 1 axis digital readout. turning diameter max : 1400 mm face plate : 1250 mm Automatic turret head spindle speed : 3,5-180 rpm feeds : 0,063 - 3,15 mm/rev rapid traverse : 1800 mm/min Further data see data sheet Machine documentation available . Dkedpfx Abjvi Hryoujh Dimensions : Length 4 m Width 2,4 m Height 3 m Weight 16t Good general condition .

Condition: used, Year of construction: 2002, Technical details: Dksdpfxoxhqqmj Abush turning diameter: 475 mm turning length: 1500 mm control: HEIDENHAIN MANUAL PLUS 4110 turning diameter over slide: 260 mm turning speeds: 3000 U/min turret head: 12 Pos. spindle bore: 78 mm quill stroke: 120 mm weight of the machine ca.: 3,1 t dimensions of the machine ca.: 3,2 x 2 x 1,9 m SAUTER turret 12 pos. , VDI 30 chipconveyor, 4-jaw chuck approx. 74.000h "machine on" *

Condition: used, Technical details: spindle diameter: 150 mm x-travel: 10000 mm y-travel: 2500 mm bore spindle stroke: 700 mm ram stroke: 700 dimension of the ram: 340 x 340 mm spindle taper ISO: 50 Speed of boring spindles: 1,25 - 1250 U/min. feed speeds infinitely variable: 1 - 5000 mm/min rapid traverse: 5 m/min total power requirement: 120 kW weight of the machine ca.: 115 t dimensions of the machine ca.: 15,1 x 10 x 6,4 m with CNC SIEMENS 840 Dsl complete retrofit in 2010 FIBRO CNC rotary table 2500 x 2500 mm, 50 to. loading capacity, longitudinal movement 2500 mm, angular milling head 4 x 90° universal milling head floor plate area ca. 12000 x 6000 mm ( 72 m²) chip conveyor and coolant attachment aerostatic guideways * Dodpfxowg R Swj Abuekh

Year of construction: 1993, condition: good (used), machine/vehicle number: 03.2370, Arthur Klink - internal broaching machine (WAG 748) machine type: internal vertical hydraulic broaching machine manufacturer: Arthur Klink type: RISZ 10 x 1000 built in: 1993 stroke: 1000mm pulling force: 10.000KG working stations: 3 PCs drive: hydraulic system equipment: coolant system, magnetic chip conveyer remark: machine under power in stock the machine has an automatic workpiece loading system for 2 workpieces, ideal useable for high production Dkodpfx Abjcc D Ddsueh Optional accessories available on request: tools, workpiece holder Information about us: we are specialized for second hand broaching machine and still have anytime about 80 pcs of used broaching machines in our stock, vertical and horizontal machines from 3000kg up 63.000kg pulling force and from 1000mm stroke up to 3500mm stroke.