Used Exhaust Extraction System for sale (5,637)

Condition: new, Year of construction: 2025, The manufacturer guarantees the quality of purification. A certified control cabinet allows for constant monitoring of the correctness of operation. The negative pressure fan 11 kW / 11300 m3/h, operates on the turbine principle, and the soundproofed design of the fan allows for a significant reduction in the noise emitted during operation. Very high tightness of the entire suction system, guaranteeing the best air quality inside the plant, and no heat loss during the heating season Advantages of DCV dust extractors Durable, massive construction guaranteeing quiet and vibration-free operation of the dust absorber the new TC series of extractors has a full upper housing that absorbs noise and vibrations generated during operation and the possibility of returning warm air Very high tightness of the entire suction system, guaranteeing the best air quality inside the plant, and no heat loss during the heating season Strong and quiet radial fan guaranteeing you high negative pressure efficiency Possibility of building a ceiling system and connecting several machines working simultaneously with DCV extractors Failure-free filter shaking system with the possibility of working in an automatic cycle Mobile drive system facilitating trouble-free movement of extractors throughout the plant Waste containers designed in such a way as to maintain 99.99% airtightness of the system, have also been equipped with a mobile system mobile Control cabinet for switching the device on/off The polyester filter stops dust with a diameter of up to 5 microns, to filter smaller particles, a filter such as HEPA should be used It is prohibited to use this extractor in an explosive atmosphere The extractor is not adapted to work with wet raw materials (e.g. wet sawdust) Before starting the extractor, the lower beam must be dismantled to have free access to the chip containers Reduction - Warm air return additionally payable Technical parameters Supply voltage 400 V Power 11 kW Engine speed 3000 rpm Filter type Polyester Filter dimensions Φ160 x 960 mm Number of filters 64 pieces Csdpfxoudalwe Aflork Inlet diameter 350 mm Outlet diameter 500 mm Efficiency 11300 m3/h Dimensions (width x length x height) 1190 x 3160 x 2320 mm (without upper elbow) Net weight 710 kg

Condition: excellent (used), Year of construction: 2021, operating hours: 10 h, functionality: fully functional, exhaust gas temperature (max.): 400 °C, Smoke Extraction Roof Fans from Stock Manufacturer: Nicotra-Gebhardt 2 units RDM 56-4550-4W-16 Airflow: 6,250 m³/h at 100 Pa Certified for 120 min at 400°C Motor power: 2.2 kW Voltage: 3-230/400V-50Hz Accessories: • Flat roof curb • Inlet nozzle • Inspection switch List price: €3,019 – 60% discount 1 unit RDM 56-5671-6W-21 Airflow: 12,000 m³/h at 100 Pa Certified for 120 min at 400°C Motor power: 9 kW Voltage: 3-230/400V-50Hz Accessories: • Flat roof curb • Inlet nozzle • Inspection switch List price: €4,606 – 60% discount 1 unit RDM 56-3535-4W-10 Airflow: 2,050 m³/h at 100 Pa Certified for 120 min at 400°C Motor power: 0.55 kW Voltage: 3-230/400V-50Hz Accessories: • Flat roof curb • Inlet nozzle • Inspection switch List price: €2,213 – 60% discount 1 unit RDM 56-2528-2W-11 Airflow: 2,850 m³/h at 100 Pa Certified for 120 min at 400°C Motor power: 1.1 kW Voltage: 3x230/400V-50Hz Accessories: • Flat roof curb • Inlet nozzle • Inspection switch List price: €2,023 – 60% discount These as-new fans were initially installed but never operated. As the intended purpose was not achieved, the fans were removed again and are now palletized and ready for collection. Cedsxuwqgjpfx Aflsrk

Condition: excellent (used), Mobile Extractor Manufactured by Höcker Polytechnik Extractor Standard III A Intake diameter 160 mm Motor 2.2 kW 380 volts Air flow 2460 m3/h Year of manufacture 1992 Transport dimensions: Height with filter 2450 mm without filter 1460 mm Length 1170 mm Width 570 mm Weight 80 kg Cedpfx Afswl U U Hjlerk

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 55062012, filter area: 577 m², suction capacity: 80,000 m³/h, empty load weight: 9,900 kg, Equipment: CE marking, TECHNICAL DETAILS Capacity: 80,000 m³/h Filtration area: 577 m² Crodpfjxcnthjx Aflok MACHINE DETAILS Unladen weight: 9,900 kg Transport packages: 1 EQUIPMENT Extraction system Fire extinguishing system Control cabinet included Shaker cleaning system CE marking present

Condition: good (used), Year of construction: 2017, machine/vehicle number: 0381, Offer 25147 Technical Data: - Portable design suitable for CrNi steels - Air flow rate approx. 200 m³/h - Max. negative pressure 19,000 Pa - Filter surface area approx. 0.8 m² - Filter separation efficiency 99.9 % - Extraction connection 60 mm - Extraction hose 5 m - Water-cooled torch package with extraction function 4 m Csdpfxextatzj Afljrk - Start-stop automatic - Dust drawer - Drive - Fan: 230 V / 1.1 kW - Required space approx. W 650 x H 600 x D 250 mm - Weight approx. 25 kg

Condition: new, Design with bag filters and integrated extinguishing device Cjdpfevr I R Aox Aflsrk Technical data: extruction nozzle 250 mm engine power S1 6,5 kW, 400V nominal volume flow 3534 m³/h max. volume flow 4900 m³/h cut surface vacuum measured with 2 m hose 2740 Pa filter area 22,4 m² filter dedusting compressed air chip collection volume 2 x 250 l residual dust content H3 (

Condition: used, Year of construction: 2006, filter area: 31 m², suction capacity: 2,500 m³/h, Dust extractor, welding fume extraction unit, self-cleaning cartridge filter, pneumatic, vacuum-based, for plasma cutting, laser, sandblasting, soda blasting, shot blasting, and all types of dry dust. The Absolent TSF4F dust filter is built on the latest and most efficient filtration technology. Air is drawn into the filter cartridges, while most residual particles adhere to the outside of the cartridges. The cleaned air passes through the fan into the HEPA filter, which ensures a guaranteed and constant collection efficiency of 99.99%, capturing particles with a diameter of 0.3 µm. The HEPA filter is equipped with a manometer that indicates when the cartridge needs to be replaced. When the pressure drop across the filter cartridges exceeds the set threshold, the valves in the cleaning air tank open and a pulse of compressed air is released into the filter cartridges from the cleaning nozzles. Make: Absolent Model: TSF4F Credpjxu Hg Djfx Afljk Specifications: Fan power: 4 kW Capacity: 2500 m3/h Sound level (operation/cleaning): 60/85 dB(A) Filtration area: 31 m2 HEPA filter area: 24 m2 Stock no.: 1078

Condition: used, No. 04490 Mobile extraction unit / Mobile dust extractor ESTA Dustomat 10 Used For extracting wood dust and chips Filter type H2 for wood dust, residual dust content level 2, 0.2 mg/m3 Type 1, for extracting combustible dusts of dust explosion classes St 1 and St 2 400 V, 1.1 kW, with power cable and plug Nominal air volume flow 720 m3/h Filter area 3.5 m2 Extraction pipe connection diameter 100 mm Filter cleaning by hand crank Chip container 670 x 460 mm Mobile unit CE-compliant Transport dimensions approx. 1300 x 600 x 1700 mm LWH Weight approx. 100 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices excl. VAT, payment before collection or dispatch Credexn Tilopfx Aflok Terms of delivery: ex warehouse

Condition: new, functionality: fully functional, Year of construction: 2025, Advantages of DC Chip Extractors The purpose of the Vibra Motor shaking system is to ensure stable operating parameters and to monitor the proper functioning of the extractor. A heavy-duty design enhanced with a radial fan guarantees maximum vacuum efficiency. The extractor is intended for dry sawdust and wood chips. Thanks to the airtight construction, it is suitable for operation both outdoors and inside the facility. Adapted for operation in a positive-pressure system (fans work on the contaminated side of the dust collector) as well as in a negative-pressure system (fans work on the clean side of the dust collector). The sound-insulated design and specially shaped impeller blades contribute to quiet and efficient operation while minimizing electrical power consumption. A key advantage of the extractor is the use of flexible and durable seals in critical areas, improving the tightness of the entire system without heat loss at connection points. A multifunctional device with a modular system allowing any configuration of the extractor. Warm air recovery system. Control cabinet equipped with an intuitive control panel that allows monitoring of filter contamination levels. For filtering smaller particles, a filter such as HEPA should be used. It is forbidden to use this extractor in an explosive atmosphere. The extractor is not designed to work with wet material (e.g., wet sawdust). Industrial Chip and Sawdust Extractor DCV21750 Technical Specifications Motor Power: 25 HP / 400 V, 50 Hz Extraction Capacity: 21,750 m³/h Inlet/Outlet Diameter: 400 / 400 mm Suction Speed: 28 m/s Number of Filters: 2 × 48 Number of Waste Bags: 8 Dimensions (L × W × H): 4600 × 1700 × 3500 mm Cjdpsx Agpzofx Aflerk Weight: 1400 kg SPECIAL OFFER!!! LAST UNIT IN STOCK!

Condition: excellent (used), Unit with supply air heating in excellent condition Credpfx Afsxpg Dxolsk

Condition: good (used), Year of construction: 2017, machine/vehicle number: 0371, Offer 25146 Technical Data: Cjdextapiepfx Afljrk - Portable design suitable for CrNi steels - Air flow rate: approx. 200 m³/h - Max. negative pressure: 19,000 Pa - Filter surface area: approx. 0.8 m² - Filter separation efficiency: 99.9% - Extraction connection: 60 mm - Extraction hose: 6 m - EWM torch package, water-cooled with extraction function: 4 m - Automatic start-stop - Dust drawer - Drive – fan: 230 V / 1.1 kW - Space requirement: approx. W 650 x H 600 x D 250 mm - Weight: approx. 25 kg

Condition: used, Year of construction: 2023, intake manifold diameter: 250 mm, power: 4 kW (5.44 HP), Used extraction system with 4 kW power, in very good condition and inspected by the manufacturer. All filters have been replaced. Credpexw Ik Asfx Aflok

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, total height: 6,300 mm, total width: 2,350 mm, overall weight: 2,800 kg, type of input current: AC, volume flow: 25,000 m³/h, input voltage: 400 V, power: 55 kW (74.78 HP), 3 filter units each : JKF model Jet Blower BF 90 - 3.5 ( there 90 it is the number of filters bags and 3,5 it is the length of filter bag) Year 1996 - all function in fully working conditions 149,5 m2 filter area gives approx 25 000 m3 with possibility to overload by 20%. Crsdpfoxu Dr Rsx Aflek One Blower engine 55 kw and two units with 45 kw engines. 400 V AC 50 HZ el. connection Please open the included PDF document for all measurements. Please contact for more information. Rekman Maskin & Service since 1986 All filters are still connected to el. power and can be shown in working conditions. Located in Norway .

Condition: ready for operation (used), Fan motor power - 2.2 kW Number of bags - 2 Power supply - 380V Cjdpfxexz Erxo Aflork

Year of construction: 2000, condition: good (used), Stock number: 2739 Manufacturer: TEKA Year of manufacture: 2000 Type: PP-DC Number: 201320 Volume flow: 320 m³/h Max. Negative pressure: 22.000 Pa Connection diameter: 50 mm Equipment: mobile, portable Accessories: hose 3.000 mm Connection: 1.2 kW 230 V Weight: approx. 40 kg Dimensions: 300 x 300 x 850 mm without hose Crsdpfxjmf Uzxs Afljk

Condition: good (used), Year of construction: 2012, Exhaust gas filter system, exhaust gas filter system, exhaust filter, hot filter, industrial exhaust gas filter, exhaust air purification system, filter cleaning system, electrostatic precipitator, filter system, oil mist separator, oil mist separator, air filter, mist separator, oil and emulsion mist separator, particulate filter, industrial filter Cedewrcbnopfx Afljrk -Manufacturer: ifs, exhaust air purification system industrial filter type IF-Vario M 1600 -Nominal power: 0.75 kW -Suction power: 1600 m³/h -Individual components: see photos -Dimensions: 990/600/H660 mm -Total weight: 100 kg

Condition: used, No. 04491 Crsdpfx Aoxnqausflek Mobile extraction unit / Mobile dust extractor ESTA Dustomat HMS 10 WN Used For extracting wood dust and chips Filter type H2 for wood dust, residual dust content level 2, 0.2 mg/m3 Type 1, for extracting combustible dusts of dust explosion classes St 1 and St 2 400 V, 1.1 kW, with power cable and plug Nominal air volume flow 720 m3/h Filter area 3.5 m2 Extraction pipe connection diameter 100 mm Filter cleaning by hand crank Chip container 670 x 460 mm Mobile unit CE-compliant Transport dimensions approx. 1300 x 550 x 1700 mm LWH Weight approx. 100 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, nominal power: 11 kW (14.96 HP), Wet extraction for metallic dusts with 11kW and approx. 6000 m³/h. Demonstration machine in very good condition. Crjdpfxexw Ib Ij Afljk

Condition: new, Year of construction: 2024, functionality: fully functional, Complete module for supplying two two welding workstations with integrated integrated welding fume extraction system from Teka (welding fume extraction class W3, with automatic automatic filter cleaning) for steel. Mobile product. Csdpfxsuud Irs Afljrk Small devices (Bosch, Makita or Milwaukee) can be attached to the holder (Fig. 4). Alternatively (for an extra charge), extraction systems from Nedermann, Kemper, Denios, Valco, Vaupel, Plymovent and other brands. Fully assembled including 1 frame 2 AGA 2020 extension arms 1 tool cabinet 1 gas cylinder holder 2 power dispensers 2 compressed air dispensers The welding workstation is suitable for TIG, MIG and MAG welding equipment from the companies: Fronius, Clos, Rehm, Migomat, Esab, Lorsch, Ideal, Kemppi and many more! The welding table shown in picture 5&6 can be purchased separately! At the moment we have one returned knife and one used welding workstation (SAP) available. - We look forward to your inquiry!

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, 3 chip collection bags of 175 liters each Suction nozzle 200 mm Airflow volume 3,300 m³/h Motor power 3 kW Cedpfoxvxncsx Aflsrk Filter area 3 x 2.2 m² The extraction unit was used once on a rental basis

Year of construction: 2017, condition: excellent (used), Stock number: 2727 Crjdpfslt Uinex Afljk Manufacturer: ESTA Year of manufacture: 2017 Type: KAF 100 Number: 16002366 Volume flow: 700 m³/h Max. Negative pressure: 1.100 Pa Connection diameter: 50 mm Equipment: mobile Accessories: see picture, among others laboratory suction arm connection: 0,55 kW 230 V Weight: 42 kg Dimensions: 485 x 485 x 920 mm without hose

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Max. air flow rate 2900 m³/h Inlet diameter 200 mm Max. negative pressure 3500 Pa Drive power 4.0 kW Filter area 24 m² Filter elements 2 pcs. Dust collection bin 38 l Crjdpjxnrxxofx Afljk Dimensions 1,660 x 840 x 1,640 (L/W/H) mm Weight 310 kg Sound pressure level 72 dB(A) Metal chips Metal dusts Plastic dusts Plastic chips Cotton dusts Paper dusts Welding fumes Soldering fumes

Condition: used, No. 04489 Mobile extraction unit / Mobile dust extractor ESTA Dustomat 61 Used For extracting wood dust and chips Filter type H2 for wood dust, residual dust content level 2, 0.2 mg/m3 Type 1, for extracting combustible dusts in zone 22 400 V, 3 kW, with power cable and plug Nominal air volume flow 1850 m3/h Extraction pipe connection diameter 160 mm Filter surface area 9.6 m2 Filter cleaning by hand crank Filter dimensions approx. 720 x 510 mm Chip container 860 x 570 mm Mobile unit CE-compliant Including new replacement filter Operating instructions available Transport dimensions approx. 1700 x 800 x 2100 mm LWH Weight approx. 250 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Csdpjxnprcefx Aflerk Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 12641245, type of input current: three-phase, overall weight: 82 kg, input voltage: 230 V, volume flow: 600 m³/h, noise level: 73 dB, space requirement width: 770 mm, space requirement length: 1,145 mm, input frequency: 50 Hz, Equipment: type plate available, The FilterCart Carbon mobile filter unit is specially designed for odor removal. Cedpswfrggsfx Afljrk The FilterCart Carbon includes the standard extraction arm and can optionally be equipped with a HEPA filter. Applications: Solvents, smoke, and other gas contaminants. Condition: Slight signs of wear (minor damage to the PVC hose – see image), as the mobile filter unit was only used a few times as a demonstration unit. Product Description • Durable disposable filter with a large filter surface • Ready for immediate use • Filter housing with clamping lever lock • Robust chassis with 2 swivel casters and 2 fixed wheels • Easy to maneuver Protection class: IP42 Material: Rotationally molded plastic housing. Extraction arm made of PVC hose and aluminum rods. Fan made of steel and aluminum. Extraction arm diameter: 160 mm Arm length: 2 m Filter material: Activated carbon

Year of construction: 1997, condition: good (used), Type: NI3500 Ex Number: 97195 Power: 2 kW Capacity; 3.500 m³/h Footprint: 750 x 950 mm Extraction nozzle top: 300 mm Crsdpfohk Emisx Aflsk Suction nozzle bottom: 120 mm Dimensions: 750 x 950 x 1.250 mm Weight: 250 kg