Used External Cylindrical Grinding Machine for sale (86,309)

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 1845/455, Completely refurbished: Mechanics, geometry, hydraulics, and electrical components Wheelhead Disassembly, cleaning of parts, replacement of worn and defective components, motor overhaul, replacement of bearings, replacement of belts, spindle disassembly, replacement of seals and O-rings, plus adjustment. New paintwork. Workhead Disassembly, cleaning of parts, replacement of worn and defective components, motor replacement, replacement of belts. New spindle bearings. New paintwork. Tailstock Disassembly, cleaning of parts, replacement of worn and defective components, motor replacement, replacement of belts. New spindle bearings. New paintwork. Internal grinding attachment Disassembly, cleaning of parts, replacement of worn and defective components, installation of the support and geometry alignment. New paintwork. Hydraulics Disassembly, motor replacement, hose replacement, defective and worn parts replaced. Hydraulic block checked. X-Axis Disassembly, replacement of worn items such as O-rings, seals, rings, etc., overhaul of hydraulic piston, regrinding of tables. Z-Axis Disassembly, regrinding of tables, replacement of worn and defective parts, overhaul of hydraulic piston, scraping of V and flat guides. New paintwork. Measuring system Digital 2-axis display included. Electrical cabinet Replacement of motor contactors and relay controls. New wiring. New variable speed drive (frequency inverter) for the workhead. TECHNICAL SPECIFICATIONS Distance between centers: 1500 mm Distance between centers (workhead to tailstock overhang): 1650 mm Center height, standard: 125 mm Center height with riser blocks: 225/250 mm Maximum grinding diameter: Ø 250 mm Maximum grinding diameter with riser blocks: 450/500 mm Table Usable surface: 2060 x 140 mm Max. length and width for surface grinding: 1750 x 200 mm Longitudinal travel, manual or hydraulic: 1750 mm Manual table movement, 1 handwheel revolution – coarse: 20.006 mm Manual table movement, 1 handwheel revolution – fine: 2.457 mm Table speed, continuously via hydraulics: up to 6 m/min Table swivelling: 6° Stop and return: 0–5 sec. Workspindle Workpiece speeds, continuously variable (electric): 20–400 rpm Swivelling: 360° Workspindle taper (internal): MT5 Rodoxt Ilfepfx Ah Ujck Tailstock Internal taper, tailstock spindle: MT3 Spindle retraction, manual or hydraulic: 30 mm Diamond dresser taper (internal): MT0 Universal grinding head Cross slide travel for wheel: 285 mm Rapid traverse for wheel slide, front and rear: 40 mm Grinding spindle speeds: 1500 – 1700 – 2200 – 3600 rpm Vertical grinding spindle movement, center heights: 125–330 mm Max. wheel for cylindrical grinding: 400 x 50 x 127 mm Max. wheel for surface grinding: 250 x 20 x 76 mm Head swivelling with locking at every 90°: 270° Wheel feed 1 division of the micrometer drum: 0.005 mm/Ø Automatic wheel feed, max.: 0.9 mm/Ø Motors Grinding spindle motor: 2,900 rpm / 4.0 hp Workspindle motor: 3,000 rpm / 2.0 hp Coolant pump motor: 2,850 rpm / 0.12 hp Internal grinding attachment Bore: 70 mm Internal grinding spindle speed Ø70 mm: 14,000 rpm Internal grinding spindle speed Ø50 mm: 21,000 rpm Subject to error or omission, the technical information is provided without obligation.

Condition: good (used), Centerless grinding machine Good condition, fully operational, can be inspected and tested on site. Shipping abroad is also possible. Inspection: As a general note, to avoid misunderstandings, the item can be viewed and tested under power before purchase. Please ask questions before buying to avoid any ambiguities. For general inquiries or to arrange an inspection appointment, I am available at the phone number listed below or above at any time. Subject to prior sale and errors in the description. VAT is shown separately on my invoices. Rcodpsw Rcu Rsfx Ah Uok Shipping via freight forwarding.

Condition: good (used), Year of construction: 2009, Control: Siemens 828-D SL Max. grinding diameter: 500 mm Max. grinding length: 2000 mm Max. workpiece weight: 500 kg between centres Swiveling of grinding head: +45 / -15° (manual) Grinding wheel: 500/80/203 mm Rcsdpfx Ajxyv Uzeh Usk With steady rests With enclosure

Condition: as good as new (ex-display), Year of construction: 2025, Centre height: 181 mm Centre distance: 650 mm Maximum grindable workpiece diameter: 360 mm Max. load between centres (cantilevered): 1000 N (100 kg) Max. load between centres: 3000 N (300 kg) Z-axis: Table swivel angle: 10° Table drive, hydraulic: 0-4 m/min X-axis: Infeed spindle travel: 80 mm Rapid traverse (hydraulic): 50 mm Coarse adjustment (air cushion): 280 mm Feed drive by DC motor Rapid feed rate: 48 mm/min/Ø Feed process: plunge grinding / longitudinal grinding 4 preselectable feed rates: mm/min/Ø 0.01–48 4 preselectable infeed amounts: mm 0.001–0.1 Spark-out time, oscillation grinding: 0–99 s / 0–99 strokes Tapping infeed: mm/Ø 0.001 Grinding spindle headstock: universal, swiveling: 0–180° Grinding wheel (external): D x b x d (mm) 500x100x127 or 203.2 Grinding wheel (face - option): D (mm) 250x32x76.2 Grinding wheel (internal - option): D (mm) (2–250) Drive power, external/face: kW 5.5 (7.5) Drive power, internal: kW 2.2 Peripheral speed, external: m/s 35 (50) Grinding wheel wear (external): mm/Ø 160 Guard width: 100 mm Grinding spindle diameter: 60 mm Internal spindle mounting: 80 (100) mm Workpiece headstock: Stepless variable drive: Mk 4, 1/mm 30–270 / 50–450 Workpiece spindle fixable Spindle bore: MK 4/24 mm Spindle nose for flange mounting: MK 4 mm cylindrical Ø63H6 x 6 Workpiece headstock swivel on rotary part: 0–90° Tailstock: Quill mounting / quill diameter: MK 4 / 75 mm Quill stroke: 45 mm Quill force: 100–800 N / 250–1400 N adjustable Quill actuation: manual (foot switch) Quill fine adjustment: ±40 µm Connections: Total connected load (machine): 6.5–10 kW Grinding spindle headstock: 5.5 (7.5) kW Workpiece headstock: 0.55 (1.1) kW Coolant filtration: 0.75–2.2 kW Guideway lubrication pump: 0.1 kW Hydraulic pump: 1.5 kW Hydraulic tank: 80 L Pneumatics: 6 bar Rcedpfstqf Sqex Ah Uok Comparable machines: Weiss / EMAG / GP cylindrical grinders / Studer / Kellenberger / Schaudt / Tschudin / Tacchella / Dannobat

Condition: good (used), grinding diameter 450 mm grinding length 600 mm centre height 140 mm Rcsdpfx Ahsxcblqs Usk workpiece dia. 280 mm number of turns of spindle head 63 - 400 U/min grinding wheel speeds 20-35 m/s dimensions of the machine ca. 2,4 x 1,9 x 2,1 m

Year of construction: 2008, condition: ready for operation (used), General Data Machine weight 12000 kg Movement X-Axis Movement 450 mm Z-Axis Movement 850 mm Rcsdsx D Iwvjpfx Ah Ujk This STUDER S242 was manufactured in 2008, a cylindrical grinding machine known for its robustness and precision. It features a swing diameter of 180 mm, max workpiece weight of 20 kg, and grinding spindle speeds up to 50 m/s. The machine includes shaft automation, grinding wheels, and is still powered up and fully functional. Annual maintenance by Studer ensures reliability. For more information about this machine, please reach out to us. Application Types Grinding

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: 32461/2384, Manufacturing origin Swiss Voltage 380 / 50 / 3 Netweight 4900 lbs Dimensions 121 x 69 inches TECHNICAL DATA Nominal distance between centre 600 mm Max. distance between centres, headstock and tailstock projecting 750 mm Height of centres, standard 125 mm Height of centres by means of raising blocks for work head-and tailstock 175 =ᐳ 250 mm Max. swing diameter with 125 mm height of centres 250 mm Max. swing diameter with raising blocks 350 =ᐳ 500 mm Table swivels each side 10° Max. lenght for surface grinding (width=200 mm) 900 mm Table speed infinitely viable by hydraulic drive, approx. .. 6 m/min Dwell of table reversal 0 - 5 sec. Grinding wheel for cylinrical grinding (diameter x width x hole) 350/400x50x127mm Grinding wheel for surface grinding diameter x width x hole 250 x 13 x 76 Rcodpfxod Amife Ah Uok Speeds of grinding wheel spindle 1500/1700/2200/3600 Grinding wheel head swivels 270° with indexed stop each 90° Vertical movement of grinding wheel head, height of centres -350 mm Cross movement of grinding wheel head 285 mm Rapid advance and withdrawal of wheelhead 40 mm Intermittent infeed per reversal of table 0,001-0,03 mm/dia Infeed for plunge grinding 0-0,9 mm/dia Micro-corrector of infeed, 1 division of dial 0,001 mm/dia Swivel of work headstock 360° work speeds infinetely viable, normal/special 20-400/10-400 Internal taper of headstock/tailstock 5/3 Morse Grinding wheel motor, approx. 4 HP errors and omissions excepted data given without obligation Inventory Nr.2170089, machine equipped with : 1 Workpiece headstock MT5 1 sinus rule without comparator 1 Wheel headstock with 4 pulleys 1 Tailstock MT3 1 Collet clamping device with drawbar and reduction sleeve B32 1 Internal grinding device with quill Fischer UJ50x250 – pulley Ø 48 for 14000 min-1 1 Pivoting wheel trueing-up device with sole 50 mm 1 Table’s pivoting stop without comparator 1 Cooling device through decantation 1 extractor 1 balancing stake

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, Studer S20 in very good condition with accessories and documentation Rcodewa Iimepfx Ah Uok

Condition: like new (used), Year of construction: 2021, operating hours: 7,500 h, functionality: limited functionality, FOR SALE Grinding Machine Brand: STUDER Model: S 110 Year: 2021 CNC FANUC Rcedsxwbdpepfx Ah Uek

Condition: as good as new (ex-display), Year of construction: 2025, Karstens K11 1000 Premium Retrofit Cylindrical Grinding Machine Manufacturer: Karstens Technical Data: Centre distance: 1100 mm Centre height: 180 mm (250 mm optional) Workpiece weight: 100 kg between centres (unsupported), 300 kg between centres (supported) Grinding wheel diameter: 400 mm or 500 mm (external grinding wheel) Workpiece spindle: MT4, infinitely variable speed control 30–450 rpm, swivel range 0–90° Tailstock: MT4, quill stroke 45 mm Quill force: 200–600 N manual (up to 2500 N adjustable, optional) Table swivel angle: 10° Cross feed travel: 80 mm Rapid traverse: 50 mm Coarse adjustment (air cushion): 280 mm External grinding spindle motor: 4 kW (5.5 kW optional) Stepless grinding wheel speed adjustment via potentiometer Internal grinding spindle motor: 2.2 kW Workpiece spindle motor: 1.1 kW Hydraulic motor: 1.5 kW Lubrication motor: 0.1 kW Hydraulic tank: 80 litres Net weight: 3,800 kg Feed drive via DC motor Air cushion-assisted rapid positioning of the grinding spindle headstock for quick and safe positioning to the grinding location. Separate drive for external and internal grinding spindles. Fully automatic operation sequence, infeed movement via cam switch: Rapid approach, rapid retraction, grinding mode, infeed stop, micron infeed. Automatic longitudinal grinding cycle Centralised coolant supply for all grinding zones Workpiece headstock with infinitely variable drive for both live and lockable spindle modes. New digital infeed control with Siemens panel and Siemens PLC for both longitudinal and plunge grinding, parameter input for retraction, infeed amounts, feeds, spark-out times, idle strokes; compatible with the previous Karstens infeed control; featuring a colour Siemens touch panel; HEIDENHAIN scale on X and Z axes. Comparable to Weiss, EMAG, GP cylindrical grinding machines, Studer, Kellenberger, Schaudt, Tschudin, Tacchella, Dannobat. Rcedpfx Asiv Au Eoh Uok

Condition: good (used), Year of construction: 1968, Malcus MC40 Centerless Cylindrical Grinding Machine Rjdpfx Ahex Aq A Ee Usck Manufacturer: Malcus Halmstad, Sweden Model: MC-40 Year of Manufacture: 1968 Control Panel: Mechanical push-button control with main switch and emergency stop Grinding Units: Two opposing units with adjustable guide and grinding supports Machine Construction: Heavy-duty cast iron frame Condition: Used, fully functional The Malcus MC40 is a robust centerless cylindrical grinding machine made in Sweden, renowned for its reliable precision during continuous industrial operation. The machine features a solid cast iron construction which minimizes vibration and ensures consistent grinding results. Its opposing grinding and guide assemblies can be precisely adjusted, making it ideal for machining rotationally symmetrical workpieces. An integrated dressing device keeps the grinding wheel in optimum condition during use. The mechanical control panel with its clearly arranged elements enables intuitive operation of the grinding process. Designed for high stability and long service life, this machine is an excellent choice for workshops and production facilities seeking a dependable solution for centerless grinding. No guarantee is provided for the accuracy, completeness, or currency of the information given.

Year of construction: 2023, operating hours: 4,976 h, condition: ready for operation (used), General Data Measurements width 3250 mm Measurements depth 2100 mm Measurements height 2150 mm Control Unit Brand FANUC Model 31i-B Main Drive Number of axis 4 Movement X-Axis Movement 370 mm Rcodpfxex D Nfns Ah Uok Z-Axis Movement 800 mm Workpiece Workpiece weight 150 kg Additional Equipment Equipped with: Measuring probe, Kraft & Bauer fire extinguisher installation, LTA oil mist separator, DGS paper filter, motorex/Ritter & bader coolers, grinding wheels, documentation This 4-axis STUDER S33 cylindrical grinding machine was manufactured in 2023. It features a distance between centers of 650 mm, center height of 175 mm, and can handle a maximum workpiece weight of 150 kg. Equipped with a Fanuc 31i-B control system, it also includes a measuring probe, fire extinguishing system, oil mist separator, and coolers. Consider the opportunity to buy this STUDER S33 cylindrical grinding machine. Contact us for more information about this machine. Application Types Grinding

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 027.0400/067, CNC CYLINDRICAL GRINDER STUDER S-33 CNC Year: 2007 - Fanuc 21i-TB 1 External Grinding Spindle Country of Origin: Switzerland Voltage: 380/50/3 Net machine weight: 4,000 kg TECHNICAL SPECIFICATIONS Distance between centers: 600 mm Center height: 175 mm Maximum workpiece weight: 80 kg Longitudinal Slide Z Max. travel: 800 – 1,150 mm Travel speed: 0.001 to 10,000 mm/min (early 2000’s model: 0.001-5,000 mm/min) Resolution: 0.0001 mm Cross Slide X Max. travel: 285 mm Travel speed: 0.001 to 20,000 mm/min (early 2000’s model: 0.001-10,000 mm/min) Resolution: 0.0001 mm Wheelhead (universal version) Swiveling range: -15° to 225° (early 2000’s model: -15° to 195°) Swivel axis: 2.5 / 1 ° Hirth Drive power: 7.5 or 9 kW or 11 kW Grinding wheel: 500x63 (80/110F5) x203 mm Workhead Rotational speed: 1 – 1,500 min-1 Mount taper: MT4 or MT5 / ISO 50 Drive power: 1.6 or 3.0 or 4.0 kW Tailstock Mount taper: MT3 or MT4 Quill stroke: 35 / 50 mm (early 2000’s model: 35 mm) Quill diameter: Ø 50 mm Fine adjustment: +/- 40 µm Control system: Fanuc 21i-TB Rcsdpfxew T Sh Es Ah Ujk All technical details are provided in good faith but subject to errors or omissions.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Studer S32 with Siemens 840 powerline control and Felsomat handling. 30-degree angled cut. Top condition. Rodpewa Im Ejfx Ah Usck Machine can be inspected under power.

Condition: used, functionality: fully functional, Kellenberger cylindrical grinding machine in very good condition. Available at a favorable price. Price significantly reduced !!!!! Rodpfxew Dy Rqs Ah Usck

Condition: as good as new (ex-display), Year of construction: 2025, Centre height: 181 mm Centre distance: 1000 mm Maximum grindable workpiece diameter: 360 mm Max load cantilevered: 1000 N (100 kg) Max load between centres: 3000 N (300 kg) Z-axis: Table swivel angle: 10° Table drive, hydraulic: 0–4 m/min X-axis: Cross slide travel: 80 mm Rapid traverse (hydraulic): 50 mm Coarse adjustment – air cushion: 280 mm Infeed drive by DC motor Rapid infeed speed: 48 mm/min/Ø Infeed cycle: Plunge grinding / Longitudinal grinding 4 preselectable speeds: mm/min/Ø: 0.01–48 4 preselectable infeed increments: mm: 0.001–0.1 Automatic shut-off during stop-grinding: 0–99 s or 0–99 strokes Stepwise infeed: mm/Ø: 0.001 Grinding headstock universal, swivelling: 0–180° Grinding wheel (OD): D x width x bore: 500 x 100 x 127 mm or 203.2 mm Grinding wheel (face, option) D: 250 x 32 x 76.2 mm Grinding wheel (ID, option) D: 2–250 mm Drive power, external/face: 5.5 (7.5) kW Drive power, internal: 2.2 kW Peripheral speed, external: 35 (50) m/s Grinding wheel wear (OD): mm/Ø: 160 Guard width: 100 mm Grinding spindle diameter: 60 mm Internal spindle mounting: 80 (100) mm Workpiece headstock: Infinitely variable drive: MK 4, 1/min: 30–270 / 50–450 Workpiece spindle lockable Spindle mounting: MK 4/24 mm Spindle nose for flange attachment: MK 4, cylindrical Ø63H6 x 6 mm Headstock swivels on rotating part: 0–90° Tailstock: Quill mounting / Quill diameter: MK 4, 750 mm Quill stroke: 45 mm Quill force, N: 100–800 / 250–1400 adjustable Quill operation: manual (foot switch) Rjdpfx Ahjtqf Rze Usck Quill fine adjustment: ±40 μm Connections: Total machine connected load: 6.5–10 kW Grinding headstock: 5.5 (7.5) kW Workpiece headstock: 0.55 (1.1) kW Coolant filtration: 0.75–2.2 kW Lubrication pump – guideways: 0.1 kW Hydraulic pump: 1.5 kW Hydraulic tank: 80 l Pneumatics: 6 bar Comparable to: Weiss / EMAG / GP cylindrical grinders / Studer / Kellenberger / Schaudt / Tschudin / Tacchella / Dannobat

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 510-1986, CYLINDRICAL GRINDER JOTES SCHAUDT A440X1500 Specifications Maximum longitudinal travel: 1500 mm Grinding diameter: 298 mm External grinding: Yes Internal grinding: Yes Dimensions (L x W x H): 5400 × 2400 × 1600 mm Weight: 4800 kg Operating hours: — Power-on hours: — Condition: Rebuilt Compliant with local standards: — Status: Under power Technical features - Grinding length [mm]: 1500 - Grinding diameter [mm]: 300 - Manual table displacement [mm/rev]: 10 - Table speed range [mm/s]: 0.01–5 - Smallest table stroke [mm]: 3 - Wheelhead swivel [°]: ±90 - Centre sleeve taper [Morse No.]: 4 - Grinding wheel dimensions [mm]: 500 x 63 x 203 - Spindle speed [rpm]: 32–500 - Grinding wheel drive motor power [kW]: 5.5 - Workpiece drive motor power [kW]: 0.75 - Hydraulic pump motor power [kW]: 1.5 Rjdpfew T Ti Dex Ah Uock - Grinding attachment drive motor power [kW]: 0.75 - Machine dimensions [mm]: L=5400 / W=2400 / H=1580 / Machine weight [kg]: 4800

Condition: excellent (used), Kellenberger 1000U cylindrical grinding machine, available at a competitive price with many accessories included. There are a total of 3 machines for sale. All machines are in very good condition and fully operational. One machine was purchased as a fully overhauled unit in 2019. Prices are negotiable. Price for all 3 machines including many accessories (grinding wheels, etc.). Price significantly reduced! Rcodpfx Aewkt Eush Usk

Condition: new, We offer spare parts of all kinds for your conventional or CNC Karstens/GP cylindrical grinding machine – for all components around your tailstock, workpiece spindle head, grinding spindle head, ball screws, glass scales, grinding wheel flanges, drive motors, axis drives (BOSCH SIEMENS), bellows, bearings, K11/K21 infeed controls new and used, reversing blocks for the Z-axis as exchange units... Also suitable for similar Weiss/EMAG/GP cylindrical grinding machines/Studer/Kellenberger/Schaudt/Tschudin/Tacchella/Dannobat . Rcjdpfjraibvsx Ah Usk

Condition: new, We offer you spare parts of all kinds for your conventional or CNC Karstens / EMAG WEISS / GP cylindrical grinding machine—covering your tailstock, workpiece headstock, grinding spindle headstock, ball screw spindles, glass scales, grinding wheel flanges, drive motors, axis drives (BOSCH SIEMENS), ECKELMANN controls, bellows, bearings, K11/K21 infeed controls (new and used), as well as Z-axis reversing blocks for exchange. We service machines from year of manufacture 1955 onwards: ASA-ASE-K10-K11-K12-K13-K16-K19-K21-K22-K23-K24-K25-K26-K27-K28- K29-K33-K35-K37-K50-K51-K52-K53-K57-W11-W21-GP cylindrical grinding machines—all assemblies based on Karstens design. Rcjdpfxeup Aikj Ah Uek Comparable/ EMAG-WEISS/ GP cylindrical grinding machines/ Studer/ Kellenberger/ Schaudt/ Tschudin/ Tacchella/ Dannobat.

Condition: as good as new (ex-display), Year of construction: 2025, Karstens K11 650 Premium Retrofit Cylindrical Grinding Machine Manufacturer: Karstens Technical Specifications: - Distance between centers: 750 mm - Center height: 180 mm (250 mm optional) - Workpiece weight: 100 kg between centers, 250 kg between tips - Grinding wheel diameter: 400 mm or 500 mm (external grinding wheel) - Workpiece spindle: MT 4, stepless speed adjustment 30-450 rpm, swivel range 0 - 90° - Tailstock: MT4, quill stroke 45 mm, cylindrical correction - Quill force: 200-600 N manual, (up to 2500 N adjustable option) - Table swivel: 12.5 degrees - Infeed spindle stroke: 80 mm - Rapid traverse: 50 mm - Coarse adjustment air cushion: 280 mm - External grinding spindle motor: 4 kW (5.5 kW optional) - Stepless speed adjustment of the grinding wheel via potentiometer - Internal grinding spindle motor: 2.2 kW Rcedpfxjiv Audo Ah Uek - Workpiece spindle motor: 1.1 kW - Hydraulic motor: 1.5 kW - Lubrication motor: 0.1 kW - Hydraulic tank capacity: 80 liters - Machine weight: net 3,500 kg - Infeed drive through DC motor - Air-cushion-assisted rapid adjustment of the grinding spindle head for fast and safe positioning to the grinding point - Separate drives for spindles for external and internal grinding - Fully automatic work cycle, feed movement via rotary switch: rapid advance, rapid return, grinding operation, feed stop, fine feed - Automatic longitudinal grinding cycle - Central coolant supply for all grinding points - Workpiece spindle head with continuously adjustable drive for live and lockable spindle - Digital infeed control with Siemens panel and Siemens PLC for longitudinal grinding and plunge grinding, input for return stroke, infeed amounts, feeds, spark-out times, idle strokes; compatible with older Karstens infeed controls, with a color Siemens touchscreen panel - Scale in X and Z axes by HEIDENHAIN Comparable to Weiss/EMAG/GP cylindrical grinding machines/Studer/Kellenberger/Schaudt/Tschudin/Tacchella/Dannobat

Condition: refurbished (used), Year of construction: 1990, Karstens K11 1000 Full Equipment The cylindrical grinding machine has been completely overhauled by PS-Karstens. The machine has been inspected and is in very good condition. Since we specialize in Karstens cylindrical grinders, we can offer you complete service (both electrical and mechanical) for the machine after purchase. Technical specifications: Distance between centers: 1000 mm Center height: 180 mm Workpiece weight: 100 kg (overhung), 250 kg (between centers) Grinding wheel diameter: 400 mm Workpiece spindle: MT 4, infinitely variable speed control 30–450 rpm, swiveling range 0–90° Tailstock: MT 4, quill stroke 45 mm, micrometric adjustment Quill force: 200–600 N, hydraulically operated via foot pedal Table swivel: 10 degrees Cross slide travel: 80 mm Rcodpjh Riwdofx Ah Uok Rapid traverse travel: 50 mm Coarse adjustment (air cushion): 280 mm External grinding spindle motor: 4 kW Internal grinding spindle motor: 2.2 kW Workpiece spindle motor: 0.55 kW Machine weight: net 3800 kg Feed drive via DC motor Air-cushioned rapid traverse of grinding headstock for quick and safe positioning at grinding position Separate drive for external and internal grinding spindles Fully automatic operation, infeed movement controlled by handwheel switch: rapid advance, rapid return, grinding mode, infeed stop, mym infeed Automatic longitudinal grinding cycle Central coolant supply for all grinding points Workpiece headstock with steplessly adjustable drive for live and lockable spindle Infeed control for longitudinal and plunge grinding, with programmable retraction, feed increments, feeds, spark-out times, and idle strokes Digital readouts for grinding spindle B-axis, workpiece spindle, X-, and Z-axis by HEIDENHAIN Paper belt filter unit approx. 250 L Comparable to Weiss/EMAG/GP cylindrical grinders/Studer/Kellenberger/Schaudt/Tschudin/Tacchella/Dannobat

Condition: as good as new (ex-display), Year of construction: 2025, Karstens K11 1000 Premium Retrofit Cylindrical Grinding Machine Manufacturer: Karstens Technical specifications: Centre distance: 1100 mm Centre height: 180 mm (250 mm optional) Workpiece weight: 100 kg between centres, 300 kg between centres Grinding wheel diameter: 400 mm or 500 mm (external grinding wheel) Workpiece spindle: MT 4, stepless speed control 30–450 rpm, swivelling range 0–90° Tailstock: MT 4, quill stroke 45 mm Quill force: 200–600 N manual, (up to 2500 N adjustable—optional) Table swivel: 10 degrees Adjustment travel of feed spindle: 80 mm Rapid traverse stroke: 50 mm Coarse air cushion adjustment: 280 mm External grinding spindle motor: 4 kW (5.5 kW optional) Stepless grinding wheel speed setting via potentiometer Internal grinding spindle motor: 2.2 kW Workpiece spindle motor: 1.1 kW Hydraulic motor: 1.5 kW Lubrication motor: 0.1 kW Hydraulic tank: 80 litres Machine weight, net: 3,800 kg Feed drive via DC motor Air-cushioned rapid adjustment of the grinding headstock for quick and precise approach to the grinding position. Separate drives for external and internal grinding spindles. Fully automatic operation cycle, infeed movement controlled by cam switch: rapid approach, rapid return, grinding mode, feed stop, micron feed. Automatic longitudinal grinding cycle Central coolant supply to all grinding positions Workpiece headstock with infinitely variable drive for rotating or fixed spindle configuration. Rodpeh Rimmjfx Ah Usck New digital feed control with Siemens touchscreen panel and Siemens PLC for longitudinal and plunge grinding, with input for retraction, feed values, feed rates, spark-out times, idle strokes; compatible with previous Karstens feed control. Features a colour Siemens touchscreen panel. Comparable to Weiss, EMAG, GP cylindrical grinding machines, Studer, Kellenberger, Schaudt, Tschudin, Tacchella, Dannobat.

Condition: excellent (used), Year of construction: 1982, Karstens K11 1000 This cylindrical grinding machine is in absolutely as-new condition available from December 2025. It has extremely low operating hours and comes with accessories valued at over €20,000.00. Since we specialize in Karstens cylindrical grinding machines, we can offer you complete service (electrical and mechanical) for the machine after purchase. Technical specifications: - Centre distance: 1000 mm - Centre height: 180 mm - Workpiece weight: 70 kg between centres, 250 kg on centers - Grinding wheel diameter: 400 mm - Workpiece spindle: MT 4, stepless speed adjustment 30-450 rpm, swiveling range 0 - 90° - Tailstock: MT4, quill stroke 45 mm - Tailstock support next to Z-axis table - Quill force: 200-600 N - Table swivel: 12.5 degrees - Cross slide travel (dial): 80 mm - Rapid traverse: 50 mm - Coarse adjustment air cushion: 280 mm - External grinding spindle motor: 4 kW - Internal grinding spindle motor: 2.2 kW - Workpiece spindle motor: 0.55 kW - Machine net weight: 3500 kg - Infeed drive via DC motor - Air cushion-supported rapid adjustment of the grinding spindle head for fast and safe positioning to the grinding position. - Separate drives for external and internal grinding spindles. - Fully automatic operating cycle, infeed movement controlled via rotary cam switch: rapid approach, rapid return, grinding operation, infeed stop, mym infeed. - Automatic longitudinal grinding cycle - Central coolant supply for all grinding zones - Workpiece headstock with infinitely variable drive, both live and lockable spindle. - Infeed control for longitudinal or plunge grinding, settings for retraction, infeed values, feed rates, spark-out times, idle strokes - Digital readout for X-axis from Heidenhain - Paper band filtration system available as an option on request. Rcedpfxjh Rit Ee Ah Uok Comparable to Weiss/ EMAG/ GP-cylindrical grinders/ Studer/ Kellenberger/ Schaudt/ Tschudin/ Tacchella/ Dannobat

Condition: refurbished (used), Year of construction: 1988, Karstens K11 650 The cylindrical grinding machine has been completely overhauled by PS-Karstens. The machine has been tested and is in excellent condition. As we specialize in Karstens cylindrical grinding machines, we can offer you complete service (both electrical and mechanical) for the machine after purchase. Technical data: - Distance between centers: 650 mm - Center height: 180 mm - Workpiece weight: 100 kg (between centers), 250 kg (supported between centers) - Grinding wheel diameter: 400 mm - Workpiece spindle: MK 4, infinitely variable speed 30-450 rpm, swivel range 0 - 90° - Tailstock: MK 4, quill stroke 45 mm, fine adjustment with micrometer - Quill force: 200-600 N, hydraulically operated via foot pedal - Table swivel: 10° - Infeed spindle travel: 80 mm - Rapid traverse distance: 50 mm - Coarse adjustment with air cushion: 280 mm - External grinding spindle motor: 4 kW - Internal grinding spindle motor: 2.2 kW - Workpiece spindle motor: 0.55 kW - Machine weight: net 3800 kg - Infeed drive via DC motor - Air-cushioned rapid adjustment of the grinding spindle head for quick and safe positioning to the grinding position. - Separate drive for the spindles for external and internal grinding. - Fully automatic operation: infeed movement via cam switch: rapid advance, rapid return, grinding operation, infeed stop, μm infeed. - Automatic longitudinal grinding cycle - Central coolant supply for all grinding points - Workpiece spindle head with steplessly adjustable drive for both rotating and clamped spindle operations. - Infeed control for plunge and traverse grinding, settings for retraction, infeed amounts, feed rates, spark-out times, empty strokes - Paper band filter unit approx. 250 L Rodsh Rixxspfx Ah Uock - Comparable to Weiss / EMAG / GP-cylindrical grinding machines / Studer / Kellenberger / Schaudt / Tschudin / Tacchella / Dannobat