Used Extruder for sale (401)

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: Zsk 119 mc+, type of input current: three-phase, total length: 11,000 mm, year of last overhaul: 2024, total width: 1,500 mm, total height: 1,500 mm, overall weight: 18,000 kg, Coperion extruder, 1200 hp (930 kW), 380 volts, 50 Hz. Dsdozti Tkopfx Apmjkw Designed for high-moisture extrusion (TVP or HMMA, high-moisture meat analogue), with an output of 1 to 10 tons/hour. Screw diameter: 2 x 118 mm; ABB inverter for the 1200 hp motor; liquid dosing system; solid dosing system; control panel. Also available: Urchel cutting device and rotary IQF freezer. This extruder can also be used for dry or wet pet food. This equipment has very few operating hours.

Condition: excellent (used), Year of construction: 1974, functionality: fully functional, for sale second hand brick - machinery Handle -extruder 600/560 Händle and Mixer MDV920b -filermixer Händle -roller mill 800x800 Händle WFZ880a - conveyer 40m x 80 cm gummi Dsdpozmxi Usfx Apmjkw

Condition: ready for operation (used), Plastic Film Wash Line with Extruder Available in Ireland Can be seen running if necessary Sink Float Tank Centrifuge Washer Dryer Dsdpfx Ajzylxiepmokw Extruder Granulator Shredder Everything required for the washing and recycling of Plastic Material 1 Tonne per Hour

Condition: like new (used), Year of construction: 2013, BLOW EXTRUDER HDPE Model EuroTruder 75 Dkedpfx Aowivdkspmow Made by Euro-Stel, Belgium YOM 2013 extruder: diameter 75x28 D - with neck sweder and granulate hopper mold is not included EXCELLENT CONDITION

Condition: like new (used), functionality: fully functional, Year of construction: 2017, machine/vehicle number: DS 013.0091, RAW MATERIAL TOWER PME YOC 2017 TWIN SCREW EXTRUDER WEBER Type : DS 1327 YOC 2017 DIE NORDSON YOC 2017 CALANDER OMIPA Serial 09.38A24 YOC 2017 ROLL PLANA OMIPA Serial 09.38A24 YOC 2017 THICKNESS & DENSITY MEASUREMENT SEREL Serial 4031 YOC 2019 AIR BLOWERS & COOLING CHAPEL OMIPA Serial 22.10A88 YOC 2017 PULL ROLERS AND EDGERS OMIPA Serial 11.35A19 YOC 2017 2 BREAKERS TRIA YOC 2017 GUILLOTINE OMIPA Serial 16.30A19 TRANSPORTATION BELT OMIPA Serial 17.02A49 YOC 2017 10x TRANSPORTATION BELT BIELE WEIGHING BELT BIELE STACKER / ROBOT FANUC Serial E16Y3413 Type A05B-2612-B081 YOC 2016 Load 140 kg 2 SIDE SANDER COSTA Serial LB643001A Type KK9CCCC2200 YOC 2017 PORTAL STACKER BIELE Serial A6213-24 Dodpfx Asz Dt Spjpmskw YOC 2017 LASERPRINTER MASCA ID TECHNICAL DETAILS Width : 2000 mm Extruder output : 1250 kg / hr ( possibly 1400 kg / hr ) Raw material PVC Raw material supply is a mixture of powders, ground recycled, micronised recycled Output is PVC plates size 2000 x 1390 x 3,75 mm Elecricity consumption : 41 000 KWH for 5 days production incl startup and stop of the line incl sander and extraction

Condition: excellent (used), Year of construction: 1983, operating hours: 87,618 h, functionality: fully functional, machine/vehicle number: DS 85610, overall weight: 4,000 kg, total length: 5,200 mm, total width: 1,700 mm, total height: 2,500 mm, power: 75 kW (101.97 HP), input voltage: 380 V, input frequency: 50 Hz, input current: 160 A, Original WEBER 8.8 extruder with extended barrel to model 8.22. Comes with new and original screws from Weber. HMI control panel, previously used in a cleanroom environment. Includes hopper. Machine is offered as is. Djdpfx Ajx Apckepmokw

Condition: used, functionality: fully functional, Used Lehmann UMT extruder. Suitable for a wide range of applications including food, biogas, substrates, wood fibre, and more. Contact for further information. Dedpoyxfg Tsfx Apmokw

Condition: used, Used Winkworth model ZX190-9 stainless steel mixer / extruder. Manufacturer: Winkworth Material: Stainless steel Year of Manufacture: 2018 Capacity: 190 litre (product dependent) Type Of Blades: (2) stainless steel wing blade shafts Motor: 11kw motor & gearboxes Also Includes: main electrical control panel - Separate ICS model i-Temp ci 90t 18 heating/cooling unit. - External jacket rated 3.5 bar design pressure at 250 deg.c. - Top mounted Coperion model P30-BV-150 vacuum sequencing receiver with rotary lock valve. This unit is ready to run. A video of this mixer is available below. Specifications: Capacity: 190 Litre Material of Construction: Stainless Steel Type Of Blades: 2 Dksdpozfh Uqsfx Apmsw

Condition: excellent (used), functionality: fully functional, Year of construction: 2024, 2 Kowin 232 extruder pelletizing lines for sale one brand new 2024, second 2011 good working conditions output capacity 275Kg per H Dksdpsz D T Nbefx Apmsw genuine reason for selling

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, machine/vehicle number: 06 00003 00112, screw diameter: 65 mm, TECHNICAL DETAILS Screw diameter: 65 mm Process length: total 40 L/D, divided into 24D + 16D Extruder drive according to datasheet: 45 kW MACHINE DETAILS Operating voltage: 3 × 400 V, 50 Hz AC control voltage: 230 V, 50 Hz DC control voltage: 24 V Rated current: 130 A Total power: 65 kW Maximum pre-fuse: 160 A Dkodps Ah Ei Njfx Apmew Dosing speed: 102 rpm EQUIPMENT Single-screw extruder including the control system mounted on the frame and a die. Note: The machine is sold without a melt filter, water bath, and strand granulator.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, Industrial spinning extruder from an Oerlikon Barmag production installation, suitable for polymer processing and nonwoven applications. 2 extruders are available for sale at the moment. The machine was manufactured in 2020 and has seen very little use. Machine details: Manufacturer: Oerlikon Barmag / BBE Engineering Type: 9E10/30D-HT Project: P13000 Year of manufacture: 2020 Application: spinning / polymer extrusion / nonwoven production Polymer configuration: PP Single-screw extruder Industrial heavy-duty design The original Barmag documentation identifies the unit as a “Spinning Extruder” and covers its operation as part of the complete production plant. The equipment includes the extruder with drive system, feeding/dosing equipment, electrical/control equipment and associated components as shown in the photographs. Components from well-known industrial manufacturers including Siemens, Flender, Nordson and Oerlikon Barmag are installed. The machine is currently still installed, which allows the buyer to inspect the equipment in its existing installation. Condition: Used, very low operating use Year: 2020 Availability: Immediately / by arrangement Location: Germany Extensive original technical documentation is available for the machine, including operating and maintenance documentation, drawings and information concerning the drive, gearbox, heating, cooling and electrical systems. The documentation also includes drawings and technical information concerning the extruder and its associated equipment. The complete PDF documentation with detailed technical specifications can be provided to interested buyers upon request. Dkedpfxezulh To Apmow Additional photographs and information are available upon request. Worldwide inquiries are welcome.

Condition: good (used), Ballfood Extru25 screw extruder Dksdpjz E S Dtefx Apmsw Screw extruder designed for high capacity dough production, variable speed, with ball rolling machine, 1Ph

Year of construction: 2015, operating hours: 36,000 h, condition: good (used), functionality: fully functional, machine/vehicle number: 04638, Leistritz ZSE40HP-36D Year of manufacture: 2015 Power: 55 kW Speed: 600 rpm Includes die head with 6 holes Includes volumetric dosing unit from Brabender Dkjdpfx Asx Sq I Nspmew Previous application: MB ABS, PP & PE, up to 120 kg/h Operating hours: approx. 36,000 h For the condition and contents of the offer, please refer to the pictures and video. The system is currently located in England. The system is currently disassembled. The device/system offered here has been tested and is fully functional and ready for operation. The purchase price includes VAT. You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT ID number is required. Subject to prior sale. Please visit our website and check out our other offers as well. Stated company names and trademarks are the property of their respective owners and are used for identification and description purposes only. Deviations from technical data as well as errors in the description of the item may occur and are subject to change.

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, We offer this very good PMH (Plasticmaschinen handelsgesellschaft) PMH DS25-32LD twin-screw extruder, year of manufacture 2022. Manufacturer: PMH Plasticmaschinen handelsgesellschaft Model: PMH DS25-32LD twin-screw extruder Year of manufacture: 2022 Condition: very good Category ID: 452 Type: PMH twin screw extruder PMH Compounder DS25-32LD, with co-rotating, segmented twin screws ("good as new") The machine is designed with an 11 kW three-phase drive and a distribution gearbox for 95 Nm at 400 rpm. The mounted safety coupling is combined with a cut-off contact in case of overload. The maximum permissible melt pressure is 150 bar and is monitored by a pressure sensor. Individual housings allow you to configure the machine flexibly according to your requirements. The segmented screws with a diameter of 25 mm are designed in the standard version with several kneading zones and a decompression zone (atmospheric degassing). A blind cover for the decompression zone is included in the scope of delivery. Ceramic heaters with thermal sensors and cooling fans control the temperature. A stainless steel funnel is mounted on the filling opening. The electrical control system is integrated into the machine frame. All heating zones are switched contactlessly via solid-state relays. A swivelling touch panel is available for user-friendly operation. The head plate is equipped with a mass pressure sensor. The mass pressure monitoring system switches off the drive when the set maximum mass pressure is exceeded. tool adapter with 4-hole nozzle plate Options: Dksdpfx Apjznkx Djmsw Vacuum pump for the degassing zone (only atmospheric degassing offered) 3 metre water bath Air-Knife Used strand granulator If you have any questions or need more information, feel free to send us a message or give us a call.

Year of construction: 2022, operating hours: 80 h, condition: new, functionality: fully functional, Clextral extruder Type: Evolum EV032 M Dodpoz S Idkjfx Apmekw Extruder: 40D Barrel length: 10 x 128 mm Stroke length: 1420 mm Water: 4.5 - 5.5 Bar Air pressure: 6 Bar Steam injection: 2 - 6 bar Power: 3 x 400V, 50Hz, 83kW Dimensions: 4475 x 1200 x 2100 mm Weight: 1905 kg Only 80 operating hours! Clextral water pump Type: CLX DKM Flow: 6 - 42 l/h Pressure: max. 10 bar Reservoir: 7.5 liters Power: 0.55 kW Dimensions: 1265 x 350 x 700 mm Cextral / Prominent oil pump Type: GMXA1604 Flow: 0.3 - 2.5 l/h Pressure: max. 10 bar Reservoir: 10 liters Dimensions: 900 x 700 x 1150 mm Clextral High Moisture Extrusion Cooking die HMEC type: 2 x 800 mm length Material: CLX202 Internal section: 60 x 8 mm Dimensions: 1900 x 700 x 1200 mm TLV steam set Type: 2/10 TLV Serial number: SV148 Steam flow: 2 - 10 kg/h Steam pressure: 6 - 10 bar Maximum pressure: 10 Bar Steam inlet: DN15, PN16 Steam outlet: DN15, PN16 Air pressure: 6 - 10 bar Dimensions: 700 x 1600 x 2200 mm Weight: 150 kg 2 pcs. Tooltemp temperature control unit Type: TT1398-3 Serial number: 321-5642-1 / 2 Year of construction: 2021 Power: 3 x 400V, 50Hz, 7.9kW Dimensions: 750 x 300 x 760 mm Weight: 70 kg WAM Group ploughshare mixer Type: WBH20008C023 Serial number: 17WB220000121 Year of construction: 2022 Mixer: 75 liters Dimensions: 1200 x 1600 x 1650 mm Weight: 500 kg Immequip screw conveyor Type: ELV 70/80-R Hopper: 150 liters Output: Ø 100 mm Power: 3 x 400V, 50Hz, 0.55kW Dimensions: 3100 x 1350 x 2600 mm Brabender dosing system Type: DDW-M-DDSR20 Serial number: 2200836.0636 Year of construction: 2022 Feed rate: 11 - 26 kg/h MTA France chiller Type: TAEevo TECH 081 Serial number: 2200377928 Year of construction: 2021 Refrigerant: R410A Cooling capacity: 20.6 kW Power: 3 x 400V, 50Hz, 14.2kW Dimensions: 1950 x 800 x 1500 mm Weight: 340 kg

Condition: good (used), Brand: Cincinnati Milacron Austria GmbH Type of machine: Vacuum tank Model: V-225/1/6 Machine number: 2026708.50 Year of manufacture: 1999 Pipe outside diameter max.: 2 x 32 Ø Cooling length: 6 mm Spray pump: 5 kW Dimensions (LxWxH): 6600 x 1100 x 1750 mm Weight: 1,200 kg Brand: Cincinnati Milacron Austria GmbH Type of machine: RAE 32/2 E Machine number: 2026708.70 Year of manufacture: 1999 Pipe outside diameter max.: 32 Ø Dimensions (LxWxH): 1450 x 1150 x 2500 mm Weight: 900 kg Brand: Cincinnati Milacron Austria GmbH Type of machine: RSE 32/2 NG Machine number: 2026708.80 Year of manufacture: 1999 Pipe outside diameter max.: 32 Ø Dimensions (LxWxH): 2350 x 1100 x 2000 mm Weight: 900 kg Dsdo Ahy Tpopfx Apmekw Brand: SICA S.p.A Type: A 10 63 Serial No.: 9912801 Year of manufacture: 1999 Voltage: 380 V Power: 4 kW Pipe Ø max.: 63 mm Dimensions (LxWxH): 5500 x 950 x 2000 mm Weight: 1600 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2003, operating hours: 5,000 h, machine/vehicle number: 90201097-0010/2003, screw conveyor diameter: 44 mm, screw conveyor length: 2,420 mm, For sale is a twin-screw extruder from the renowned company Berstorff, manufactured in 2003, for the production and processing of demanding rubber and TPE compounds. The system was operated in a pilot plant of a research institute and was used exclusively for research and development purposes. Unlike systems used in industrial production, the extruder was therefore not used in continuous production. Accordingly, the machine has only a few operating hours. Dkodpfez Eqwrjx Apmow The extruder is particularly suitable for research and development departments, compounders, and companies in the rubber and plastics industry that are looking for a high-performance system for trials, recipe development, material testing, and small-batch production. The detailed technical data and the available screw elements can be found in the attached documentation. The existing equipment allows for flexible configuration of the screw for different compounding tasks.

Condition: used, functionality: fully functional, Cooling fans for extruder Dksdpfx Aj Af Ip Iepmsw Manufacturer: Karl Kein Ventilatorenbau Condition: used and tested different models TOTAL PRICE: EUR 500,00

Condition: ready for operation (used), functionality: fully functional, PE/PP PIPE HEAD PO 200 / 600 Type: PO 200/600 Perforated Disc System Year of manufacture: 2015 Dsdpfxs Aigmve Apmjkw Application: Two-layer pipes + color stripes for PE and PP pipes Max. diameter: 200 mm Min. diameter: 63 mm Output: max. 600 kg/h Condition: Very good, operational The pipe head is my property. Location: Sachal Extrusion Machines Bahnhofstr. 6 D-26345 Bockhorn-Grabstede

Condition: ready for operation (used), functionality: fully functional, PE/PP PIPE HEAD RK 250 / 600 Output/hour Type: PO 250/600 System with spiral distributor, without color stripes Application for PE pipes and PP pipes Max. diameter: 250 mm Min. diameter: 63 mm Max. output: 600 kg/h Condition: Very good, operational The pipe head is my property. Location: Dedpfx As Aigyzspmekw Sachal Extrusion Machines Bahnhofstr. 6 D-26345 Bockhorn-Grabstede

Condition: used, functionality: fully functional, Year of construction: 1994, weight 2,2 t extruder diameter x mm x +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. Dsdpex U A Iaofx Apmskw +++++

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, operating hours: 200 h, machine/vehicle number: 230608, 4. Main Extruder Type: CWT95-Plus co-rotating twin-screw extruder; L/D 48 Machine Description: *IE5 AC 250 kW motor *Gearbox: Precise balancing principle applied to increase torque level; High safety factor design; Latest steel alloy material for gears, applied with special heat treatment and manufactured to a high level of precision; Imported NSK bearings and sealing rings; Special lubrication system combined with immersion and forced lubrication Dkodpfezxxifex Apmow solutions; Latest generation plate heat exchanger configured for optimal cooling; Input/output rotation speed: 1480/600 rpm; Torque: 2x1990 N.M Oil pump: 1.5 kW With heat exchanger, flow meter, oil pressure gauge *Power Transmission: Compomac safety clutch torque limiter from Italy, with speed sensor *Extrusion Line: Screw diameter: 93 mm, L/D: 48:1; Maximum screw speed: 600 rpm; Screw configuration: modular structure, torque transmission via splines; Screw material: W6Mo5Cr4V2, surface hardness HRC58～64; Barrel configuration: modular structure, each barrel with a length of 4L/D; The inner surface of the linear material is made of α101, surface hardness is HRC62-64; Barrel No.1: Feeder for all possible components, No. 4 and No. 6 with a side feed port and a venting port. No. 8, 9, 11 with a suction port for degassing. The screw profile will be determined based on the requirement. *2 side feeders for lateral feeding *1 set of degassing adapted to the needs Liquid ring pump, 1m3 water tank, gas and vapor recovery system *Electrical Cabinet Enclosure: Rittal Heat Exchanger: Apex Variable Frequency Drives: ABB PLC: Siemens Components: Schneider Electric *Spare Parts One set of screw and barrel elements and one set of shafts will be delivered with the machine.

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 3,500 h, LICHTER LRK 200, three-layer pipe head for PVC pipes, also suitable for PE and PP three-layer pipes. Last application: PP three-layer corrugated pipes. Pipe diameter max. 200 mm. Pipe diameter min. 60 mm. Dedpfx Apj Ah Suqomokw MATERIAL: Made of stainless steel. Year of manufacture: approx. 2018. Operating hours: approx. 3500 h. Condition: Very good, operational. Location: Sachal EXTRUSION MACHINES, D-26345 Bockhorn-Grabstede.

Year of construction: 2013, operating hours: 7,700 h, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 12090, This is a recycling extruder with side feeding for materials (flakes, pellets, etc.). The system is supplied with a control cabinet and a double vacuum system. The pelletizing system is missing at the end of the screw – it is not included in the scope of supply. The cylinder ends at the flange. The extruder is supplied without a screw. The frequency inverter for the main motor was replaced with a new unit 3 years ago. Installed power approx.: 474 kW Cooling water requirement approx.: 190 l/min Fresh water consumption approx.: 110 l/h Feeding system: • Diameter of the feeding screw: 200 mm • Drive for the feeding screw: 45 kW, frequency-controlled • Hopper capacity net 7 m³/250 ft³, • Gear motor 3 × 3 kW • 2 sight glasses in the hopper • 2 level indicators Extruder: • Diameter of the extruder screw: 145 mm • L/D ratio: 24 • Heating power: 50 kW • Extruder drive unit 280 kW Dkodpfx Apsznz Ezsmsw Vacuum 1: • Screw length: 16 L/D • Heating power: 40 kW • Vacuum pump power: 11 kW • Vacuum capacity: 225 m³/h • Vacuum pressure: 33 mbar Vacuum 2: • Screw length: 16 L/D • Heating power: 40 kW • Vacuum pump power: 7.5 kW • Vacuum capacity: 190 m³/h • Vacuum pressure: 33 mbar Cylinder: • Cylinder: Bimetal extruder cylinder, • Reinforcement layer 1.8–2.0 mm thick, • Hardness 63–65 HRC Installation conditions: • Voltage: 3 × 400 Volts • Permissible fluctuation max.: +5 % – 5 % • Frequency: 50 Hz Permissible fluctuation max.: +4 % – 4 % • Protective measure: Multiple grounding • Ambient temperature: min. 15 °C, max. 35 °C • Humidity max.: 90 % • Altitude of the installation site: 0 – 1000 m The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in Europe, the R&D center is being closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in Europe. The details for optimal transport need to be clarified. The machine price is without packaging.

Condition: good (used), Year of construction: 1998, operating hours: 89,340 h, functionality: fully functional, screw diameter: 90 mm, overall weight: 16,000 kg, clamping force: 650 kN, total width: 2,750 mm, total length: 5,600 mm, total height: 3,200 mm, Manufacturer: Sterling Model: 15 LBS Year of manufacture: 1998 Operating hours: 89,340 h Closing force: 650 kN Screw diameter: 90 mm BM Sterling APV, year of manufacture 1998 Complete control system replacement in 2008 with MACO-sys 6000, carried out by Davies-Standard LTD PRICE REDUCTION OF 30%!!! Dksdpfozfxwisx Apmsw Net price: from 45,000 EUR to 31,500 EUR!!!