Used Facing And Centering Machine for sale (71,636)

Condition: good (used), Year of construction: 1995, operating hours: 28,099 h, functionality: fully functional, machine/vehicle number: 662280, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, controller manufacturer: DECKEL MAHO, controller model: CNC 425, total height: 2,000 mm, total length: 3,000 mm, total width: 2,400 mm, table width: 480 mm, table length: 900 mm, overall weight: 2,000 kg, number of slots in tool magazine: 16, mount diameter: 40 mm, input voltage: 400 V, power: 20 kW (27.19 HP), input frequency: 50 Hz, input current: 50 A, DECKEL MAHO MH 600 B CNC Vertical Machining Center - Tool holder: SK 40 - Table with 7 T-slots - Including rotary table from manufacturer WALTER, type: TANIP125NEG, year of manufacture: 2010 Dcodpfxoy I Tgyj Anfjg Notice: The item must be collected on a binding date between 24.08. and 27.08.2026 at a time to be mutually agreed. FCA D-61352 Bad Homburg – loaded on truck

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 19859, travel distance X-axis: 630 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, nominal power (apparent): 44 kVA, controller manufacturer: MATSUURA, controller model: G-TECH 31i, total height: 3,200 mm, total length: 7,000 mm, total width: 6,000 mm, rotary table diameter: 500 mm, overall weight: 15,000 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 60, mount diameter: 40 mm, input voltage: 415 V, input frequency: 50 Hz, input current: 62 A, Equipment: chip conveyor, documentation/manual, MATSUURA NX-520 Universal Machining Center - Tool holder: SK 40 - A-axis travel: -125° to +10° - C-axis travel: 360° - 5-axis NC rotary table: 500 mm diameter Djdjy I Sq Repfx Anfscg - Includes the tool holders shown in the photos! - Includes coolant system, extraction unit, and chip conveyor Note: The machine vice visible on the rotary table is not included in the scope of delivery! Note: The machine can be transported on a truck up to 2500 mm wide! Note: The item must be collected between 24.08. and 27.08.2026 on a binding, prearranged date. FCA D-61352 Bad Homburg – loaded onto truck

Condition: good (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 17405, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, nominal power (apparent): 36 kVA, controller manufacturer: MATSUURA, controller model: G-TECH 840 DI, total height: 3,500 mm, total length: 6,000 mm, total width: 5,000 mm, overall weight: 15,000 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 240, mount diameter: 40 mm, tool length: 300 mm, tool diameter: 80 mm, tool weight: 10,000 g, input voltage: 415 V, input frequency: 50 Hz, input current: 50 A, Equipment: chip conveyor, MATSUURA MAN 72-25 V CNC Universal Machining Center - Tool holder: SK 40 - B-axis travel: -110°/+110° - C-axis travel: 360° - Distance between pallet surface and spindle axis: -20 to 430 mm - Distance between B-axis center and spindle axis: 4 - 410 mm - Distance between B-axis center and spindle axis: -10 mm - Distance between pallet centerline and bed zero point: 265 mm - Distance between pallet centerline and Y zero point: 180 mm - Spindle bearing inner diameter: 70 mm - Tool clamping force: 7.0 kN - B-axis feed rate: 30/min - C-axis feed rate: 50/min - Max. tool diameter: 80 mm, up to 150 mm with adjacent stations free Dcjdpfx Aey I Sfhenfsg The machine is equipped with a chip conveyor and a coolant system. Note: Includes the tool holders installed in the tool changer! Note: The machine can be transported on a truck with a width of up to 2,700 mm! Note: The item must be collected bindingly at a date to be coordinated between 24.08. and 27.08.2026. FCA D-61352 Bad Homburg – loaded onto truck

Condition: used, Year of construction: 2002, operating hours: 14,700 h, machine/vehicle number: 15115220514, travel distance X-axis: 2,200 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 720 mm, controller manufacturer: Siemens, controller model: Sinumerik 840D/810D, total height: 2,650 mm, total length: 4,472 mm, total width: 2,780 mm, overall weight: 12,500 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 14,700 h, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, Equipment: documentation/manual, Particularly interesting for export customers: Proper disassembly allows the machine to be loaded onto a standard semi-trailer with approximately 2.45 m loading width. Our disassembly team can prepare and load the machine accordingly. As a result, transport costs can be significantly reduced compared to a special transport. Technical Data Manufacturer: DECKEL MAHO Model: DMF 220 linear Year of manufacture: 2002 Machine No.: 15115220514 Control: Siemens SINUMERIK 840D/810D Operator interface: ShopMill ShopMill version: 06.02.04 PLC version: 06.03.06 Tool holder: SK 40 Working spindle: up to 12,000 rpm Tool magazine: 30 stations Table size: 2,600 × 600 mm Max. table load: 2,200 kg Travel paths: X 2,200 mm / Y 560 mm / Z 720 mm Feed rate: up to 20,000 mm/min Rapid traverse X: 18,000 mm/min Rapid traverse Y/Z: 15,000 mm/min Machine weight: approx. 12,500 kg Transport weight: approx. 14,000 kg Max. installation weight: approx. 16,000 kg Electrical Data Connected load: 50 kVA Dsdoy Nn Eyjpfx Anfecg Max. current consumption: 60 A Main fuse: 80 A Power supply: 400 V / 50 Hz Control voltage: 24 V Supply voltage: 230 V Electrical diagram available Equipment / Special Features Siemens SINUMERIK 840D/810D ShopMill operator interface SK40 tool holder 30-station tool magazine Large X-axis with 2,200 mm travel Rigid table design Documentation / technical documents available Electrical diagram available Machine under power Year of manufacture: 2002 Made in Germany Transport optimization possible through disassembly Loading onto standard semi-trailer possible Considerably lower transport costs compared to wide-load/special transport

Condition: repair required (used), Year of construction: 2016, functionality: not functional, machine/vehicle number: 7195-0022, travel distance X-axis: 440 mm, travel distance Y-axis: 140 mm, travel distance Z-axis: 170 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 10 m/min, nominal power (apparent): 10 kVA, controller manufacturer: Fanuc, controller model: 310i-A5, Equipment: documentation/manual, Manufacturer: EWAG AG Model: Laser Line Ultra Machine type: 5-axis laser machining center Serial number: 7195-0022 Release: 5 Year of construction: 2016 Laser source: Coherent Hyper-Rapid 50 laser head Laser manufacturer: Coherent Kaiserslautern GmbH Laser manufacturing date: 28/01/2016 Machine laser classification: Laser system class 1 according to DIN EN 60825-1:2008-05 Axes: X, Y, Z, B, C CNC control: Fanuc 31i-5 Control Operating voltage: 3 × 400 VAC / N / PE Frequency: 50 Hz Control voltage: 24 V DC Rated current: 17.3 A Connected load: 12 kVA Maximum fuse protection: 25 A (slow-blow) Wiring diagram number: 100211907 Extraction: ULT LAS 200 extraction system Documentation: fully available Operating hours: 35,788.02 h Note: Djdpfx Anjy E Ni Sefecg Laser unit is defective and needs to be replaced The associated FANUC LR Mate 200iD robot is currently dismantled and being refurbished; it is optionally available upon request Inspection under power possible

Condition: excellent (used), Year of construction: 2024, CNC Machining Center Hedelius T7 – 2600 1 R Magnum Control: Heidenhain TNC 7 Year of manufacture: 2024 Internal machine no.: 56 Travel distances: X-axis L/R 2,600 / 2,030 mm Y-axis 750 mm Z-axis L/R 695 / 800 mm Pendulum operation: 760 / 1,300 mm Total clamping surface: 3,080 x 750 mm Table load capacity: approx. 2,500 kg Integrated rotary table Ø 750 mm Dcjdpfxoy Ew Ebo Anfjg Interference circle diameter: 1,100 mm Workpiece weight approx. 500 kg Spindle taper: SK 40 Tool magazine: 50 positions Spindle speed: 50 - 14,000 rpm Power: 29kW Equipment - KinematicsOpt - Hand-held control device HR 510 FS - Compressed air nozzle at the spindle head - Inclined bed belt filter system 900l - Internal coolant supply (ICS) 25 bar - Infrared receiver M & H - 3D infrared probe M & H 25.50 - Tool setter - Exhaust filter - Partition wall - Blow-off guns - Rinsing guns

Condition: good (used), Year of construction: 2013, CNC drilling machine for cabinet furniture parts featuring vertical, horizontal drilling and grooving saw in X direction. Workpiece dimensions: X-axis: 270 mm - unlimited Y-axis: 150 mm - 920 mm Z-axis: 12 mm - 35 mm Side pressure device. Double zero reference, laser sensor measures exact workpiece length and adjusts drilling positions accordingly. Dodpfxjy Ia Hao Anfjcg Unit configuration: 8 vertical drill spindles, 32 mm spacing, individually selectable 2+2 horizontal drill spindles in X-direction 1+1 horizontal drill spindles in Y-direction Fixed grooving saw in X-direction Additional equipment: Folding roller supports at machine infeed and outfeed.

Condition: good (used), Year of construction: 1997, 3-AXIS MACHINE FOR DRILLING AND MILLING OF CABINET FURNITURE PARTS, WITH AUTOMATIC TOOL CHANGER FOR MILLING TOOLS Working area: 2,893 x 950 mm Maximum workpiece height: 65 mm Number of workpiece supports: 6 Number of vacuum cups per support: 2 1 milling motor, 6.8 kW Clearance height between tool holder surface (motor) and top edge of vacuum cup: approx. 250 mm 2 tool changers: 3-position traveling and 4-position lateral Grooving saw fixed in X axis Dcodey Iaihjpfx Anfog Number of vertical drilling spindles: 10 Number of horizontal drilling spindles: X 2 + 2, Y 1+1 Vacuum pump 100 cbm/h Controller: NC 410 Safety tread mat in front of the machine

Condition: good (used), Year of construction: 2008, functionality: fully functional, The Depo/ZPS machining center features an overhead gantry, meaning that all machine movements are performed by the tool. As a result, the mass of the workpiece and clamping device remains constant during machining. Year of manufacture: 2008 Spindle hours approx. 3,500 h (after spindle replacement in 2023) Control system: - Heidenhain iTNC 530 - Heidenhain HR 410 handwheel - Swiveling control panel with 15.1" monitor - Integrated Ethernet interface Technical Data Dcedpfxjy Hp Rre Anfsg Travel ranges: X 1,000 mm, Y 900 mm, Z 600 mm Work table: - 1,200 mm x 1,000 mm - Max. workpiece weight: 3,000 kg - Max. workpiece size: 1,000 mm x 800 mm x 700 mm Milling spindle: - Continuous power: 30 kW - Speed range: 1-18,000 rpm - Torque S1/100%: 80 Nm - Tool holder: HSK 63 form A - Main spindle jacket cooling - Air through spindle center for tool cooling (ILZ) - Coolant with 40 bar through the spindle (IKZ) Axes feed rates: - X, Y, Z axis feed up to 40 m/min - X, Y, Z axis rapid traverse up to 40 m/min Tool changer with double-arm gripper: - Number of tools in drum magazine (outside working area): 38 - Max. tool diameter: 80/115 mm - Max. tool length: 250 mm Tool and workpiece measurement for automatic tool and part size adjustment: - Tool radius and length measurement - Tool breakage detection - Blum laser for component measurement (Inspect) Disposal system: - Gooseneck slat conveyor - (Chip cart to be provided by buyer) Additional equipment: - Minimum quantity lubrication Minibooster 2 - Machine enclosure with full-area protective covers - Crane loading possible by unhooking the chip protection device at the front - Workspace lighting with two fluorescent lamps on the side walls Machine data: - Space requirement including service areas (LxWxH): approx. 5,000 mm x 4,220 mm x 3,830 mm - Machine weight incl. additional units: approx. 13,000 kg - Connected load: 45 kVA, 400V, 50 Hz This machining center is located in a precision tool and mold making shop. It is exceptionally well-equipped with practical features and is in very good condition. The Depo/ZPS Dynamic 1009 operates precisely and reliably. There is no maintenance or repair backlog.

Condition: excellent (used), Year of construction: 2008, Vertical machining center Deckel Maho DMF 220 Linear Year of manufacture: 2008 Control: Siemens 840 D Technical specifications: CNC control: Siemens Sinumerik 840D Number of axes: 3 X-axis travel: 2,200 mm Y-axis travel: 560 mm Z-axis travel: 720 mm Max. clamping height: 600 mm Table size (LxW): 2,600 x 600 mm Max. table load: 2,200 kg Guideway type: Linear guide Max. power: 35 kW Tool holder: SK40 Tool magazine capacity: 60 Tool change time: 9.6 s Djdpfxey Nbbze Anfecg The machine was in active serial production until recently and was predominantly used for machining steel and aluminum. Equipment: ⦁ Partition wall for setup time optimization (parallel machining / setup in one cabin half) ⦁ Conveyor belt filter system for coolant processing ⦁ Automatic tool changer ⦁ Generous working area for complex components

Condition: excellent (used), Year of construction: 2016, CNC machining center WAGNER WBE 1600 R Year: 2016 Control: Siemens 840 D Technical data: X-axis travel: 1600 mm Y-axis travel: 800 mm Z-axis travel: 630 mm Table dimensions: 1900 x 700 mm Spindle speed: 8000 rpm SK 40 Videos of the machine available Dcodpfoy Na Ugex Anfsg

Condition: used, Year of construction: 2011, functionality: unexamined, input voltage: 400 V, input frequency: 50 Hz, Equipment: CE marking, lightly used Biesse CNC machine, model Skill 300, year of manufacture 2011. Taken as a trade-in from a Dutch customer when purchasing a new machine. Dcjdpfxey Ihu Ee Anfjg 3-axis machining center with 6 support beams, milling motor, drilling unit, etc. Automatic tool changer (ISO30) Automatic lubrication Vacuum pump (Becker) Safety mats Remote control Computer (HP) and mobile console Relatively compact machine, immediately available in Barneveld for loading.

Condition: used, CNC milling machine type: VMC 500 B table: 750x400 X 500 / Y 410 / Z 400 weight: 3500 kg power: 15 KVA Dcodpfx Answulzcjfsg spindle speed: 60 - 6000 taper: BT40 ATC: 16 year: 1991 documentation

Condition: excellent (used), Year of construction: 2020, machine/vehicle number: 1478, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, travel distance Y-axis: 1,790 mm, travel distance Z-axis: 430 mm, workpiece height (max.): 120 mm, number of slots in tool magazine: 10, overall weight: 3,300 kg, Equipment: CE marking, Lightly used CNC machine from Cosmec in very good condition. Vacuum pump 100 m³ Dcjdpfx Aoy Ihkgjnfsg Automatic central lubrication Cooling 8 support beams Main motor with HSK63F Drilling unit with vertical, horizontal spindles + slot saw Safety mat at the front Safety fencing 2 control stations at the front Operator console Remote control Immediately available from Barneveld (from photo 2 onward)

Condition: used, Year of construction: 2004, Lot consists of: (1) CNC Horizontal Double-Disc Surface Grinder Technical Details: grinding wheel diameter x width 762 x 220mm, MARPOSS E3 in-process measuring system, CNC FANUC 210i-MB, 400V 50Hz 97kW, weight approx. 13 tons Dsdpjym Tuasfx Anfscg

Condition: excellent (used), Year of construction: 2004, Deckel Maho 3 axis vertical machining center in good condition with 15781 spindle hours. Well maintained by DMG services in the Netherlands. Immediately available for delivery. Viewing possible upon appointment. More info available on request. Cnc control Siemens Sinumerik 840D Number of axes 3 Maximum Reach X 2200 mm Maximum Reach Y 560 mm Maximum Reach Z 720 mm Maximum Clamping Height 600 mm Table Size (LxW) 2600x600 mm Maximum Table Load 2200 kg Guide Type Linear Max. Speed 18,000 rpm Max. Power 35 kW Tool Holder SK40 Tool Magazine Capacity 60 Tool Change Duration 9.6 sec Including: ELECTRONIC HANDWHEEL 18.000 RPM HEIDENHAIN MEASURING PROBE MODE 4 DIVIDING WALL CHIP CONVEYOR SCRAPER BELT TYPE IKZ WITH PAPER BELT FILTER BLOWN AIR THROUGH SPINDLE EXTERNAL COOLING Dcodpfx Ajy H Hz Ionfog OIL MIST SEPARATOR BREAK REMOVAL TOOL WITH LASER RESIN GUN NET SERVICE EXTENSION IBN NET SERVICE Optional: Large set of SK40 tooling and vises/clamping systems available. Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection.

Condition: used, Year of construction: 2011, Technical details: x-travel: 410 mm y-travel: 610 mm z-travel: 500 mm turning speeds: 15000 1/min tool adaptor: SK 40 control: iTNC 530 HEIDENHAIN smart NC table:: 320 x 320 mm table load: 100 kg tool change unit: 48 Pos. total power requirement: 35 kVA weight of the machine ca.: 7,4 t dimensions of the machine ca.: 4,15 x 3,8 x 3,28 m 5-axis simultaneously machining center, NC-round-swivelling table, C-axis 360°, B-axis +30/-120°, Dcsdewlhvwopfx Anfog chipconveyor, 3D touchprobe, internal coolant supply 20bar, el. handwheel, kinematicsopt, meter readings: approx. 9.600h "machine on", approx.3.500h "spindle on" *

Condition: used, Year of construction: 2016, Technical details: x-travel: 1000 mm y-travel: 610 mm z-travel: 600 mm table-size: 1150 x 600 mm table load capacity: 1000 kg rapid traverse X- and Y-axis: 24 m/min rapid traverse Z-axis: 24 m/min spindle taper:: SK 40 spindle turning speed range: 10.000 1/min spindle drive: 15/22,5 kW tool change unit: 30 Pos. CNC-control: SIEMENS 828D operate shopmill distance spindle nose and table: 110 / 710 mm weight of the machine ca.: 7 t dimensions of the machine ca.: 3,2 x 2,2 x 2,7 m Djdpfjw Hg Syox Anfscg vertical machining center, - internal coolant supply 30 bar - chipconveyor - cartridge filter - flat tracks - el. handwheel - prepared for 4th axis - 3D touchprobe RENISHAW OMP 60 - indirect measuring system - accessories (approx. 30 pcs. SK 40 toolholders incl. 2 racks, chip tray) approx. 6.000h "spindle on" *

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, Masterwood Projekt 415L 3-axis machine with ISO30 Horizontal router for doors Tool holders Drilling head Tool changer 8 tubeless supports 100m3 vacuum pump Masterwork CAD-CAM Working area 5100 x 1335 mm Machine in full working condition Machine fully checked Dcjdpjy Ilh Nofx Anfsg Machine currently installed in showroom and immediately available Front photocell safety (no mats)

Condition: good (used), Year of construction: 2006, functionality: fully functional, CNC MACHINING CENTER WITH EDGE BANDING UNIT AND ASSOCIATED POST-PROCESSING AGGREGATES. Technical Data: Working dimensions: + X-axis: 3,050 mm for single setup + X-axis: 900 mm for pendulum operation + Y-axis: Milling up to 1,220 mm with 25 mm tool diameter Edge banding up to 1,220 mm All aggregates up to 1,170 mm Workpiece thickness up to 60 mm with standard clamp 6 workpiece consoles for a tubeless vacuum system 4 workpiece stops in X-direction, integrated into the machine frame, for large workpieces 6 workpiece stops in the X-direction, one each integrated in the console 1 workpiece stop each on the left and right in the Y-direction 4 lifting rails for easy positioning of heavy workpieces LED positioning aid for easy placement of vacuum cups and consoles Aggregate equipment: Milling spindle 11 kW, HSK F63 Speed range 0 - 18,000 rpm Liquid cooling C-axis for use with processing units, with torque support and 3-point stabilization 12-position tool changer magazine Drilling head with 17 vertical spindles Spindle pitch 32 mm Air nozzle for cleaning workpiece edges Dcsdpey Hrh Tjfx Anfjg Exchangeable edge banding unit for 360-degree edgebanding work With single-roll magazine With granulate feed Edge thickness up to 3 mm Adapter aggregates: + Horizontal boring head in cross-head design + Lock case milling unit, 2 outlets + 90-degree sawing unit + Swiveling drilling/sawing unit + Combination unit for radius milling / scraper blade Control system: POWERCONTROL with: WOOD WOP AV license WOODWOP

Condition: used, Make: DISKUS-WERKE, Model: ModuLine DS 300 SO, Year of manufacture: 2013, Machine No.: 2219, Control system: Siemens, Model Sinumerik 840D sl, 2 spindles, spindle distance 210 mm, max. speed approx. 4000 rpm, W-tool spindle / grinding spindle 2000 rpm, max. workpiece diameter 100 mm, max. workpiece height 40 mm, 8-position tool turret, manufacturer Sauter, model 0.5.480.516, tool holder type Capto C5, workpiece automation device, manufacturer DVS, model Moduline, transfer robot manufacturer Epson, PLC system control by Siemens, display with Simatic Panel Touch, coolant system by Knoll, type KF150/950, paper band filter, chip conveyor by Knoll, type 225S-2/170 Dedpfx Asx Ahg Usnfecg +++ Note: This machine is part of an online surplus sale! +++

Condition: ready for operation (used), Year of construction: 1998, travel distance X-axis: 800 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, rotational speed (max.): 10,000 rpm, spindle speed (max.): 10,000 rpm, Fanuc 2 tables 1100x600 mm Djdjy Ndlpjpfx Anfecg 40-tool changer BT40 spindle maximum spindle speed 10,000 rpm 2 chip conveyors

Condition: excellent (used), Year of construction: 2021, Traverses X Y Z: 508 x 406 x 356mm, Table 1016 x 353mm, Spindle taper BT40, 20Hp spindle motor, Spindle Speed 10000rpm, HAAS Control, 20 Station ATC, coolant. Dcodjyw R Hpspfx Anfjg

Condition: used, functionality: fully functional, We offer this used Hahn+Kolb MH700 milling machine, year of manufacture unknown. Operating voltage: 380 V Djdpfx Aney Nkamjfjcg Frequency: 50 Hz Control voltage: 220 V Rated current: A Main fuse: 15 A Wiring diagram no.: 7102 If you have any questions or require more information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2017, machine/vehicle number: 172822005, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, nominal power (apparent): 60 kVA, controller manufacturer: Heidenhain, controller model: TNC530i, rotary table diameter: 500 mm, overall weight: 9,000 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 6,940 h, coolant supply: 20 bar, number of slots in tool magazine: 24, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, We are offering this used Microcut 5-axis MCU-5X vertical machining center, year of manufacture 2017. Dcodpsykiwljfx Anfjg Model: MCU-5X Serial number: 172822005 Power: 60 kVA Frequency: 50 Hz Weight: 9,000 kg Rated voltage: 400 V Number of phases: 3 + PE Rated current at full load: 100 A Short-circuit capacity: 25 kA Maximum load current: 200 A Fuse protection / rated current: 80 A Date of manufacture: May 2017 + Chip conveyor If you have any questions or require further information, feel free to send us a message or call us.