Used Felder F 700 for sale (114)

Condition: new, Year of construction: 2023, functionality: fully functional, total length: 2,500 mm, total width: 1,060 mm, total height: 1,180 mm, filter area: 2 m², negative pressure: 550 Pa, volume flow: 3,600 m³/h, FELDER FSW 2000 mobile spray wall 3x400V 50Hz, 1.1 kW, air flow rate 3600 m³/h, pressure increase 550 Pa, exhaust diameter 300 mm, outlet throttle valve D-300 mm to smooth exhaust airflow, dimensions 2500x1060x1180 mm Suitable only for water-based paints Iodpsw Hcp Uefx Ag Njih NEW including accessories as shown in the picture

Condition: used, Year of construction: 2010, Used machine Year of manufacture 2010 With joining unit and corner rounding unit Control panel with LCD display and keypad Joining unit with 2 counter-rotating diamond cutters With edge feeder for roll and strip material With glue roller and glue unit With pre-trimming from the roll With pressure unit With trimming unit with pulling trimming cut With flush and radius trimming unit Corner rounding unit for front edges Manual unit adjustment Edge thickness 0.4-5 mm Workpiece height 8-60 mm Min. workpiece width 70 mm Min. workpiece length 140 mm Feed speed 11 m/min Iodpfxew I H Rks Ag Neih With radius scraper unit With flat scraper With polishing unit Extendable workpiece support Extraction connection 120 + 2 x 80 mm Weight approx. 990 kg L x W x H 4550 x 1550 x 1100 mm Availability: Short-term Storage location: Flörsheim

Condition: like new (used), functionality: fully functional, type of input current: three-phase, Dust Extractor RL 350 3 x 400V 50Hz 15HP 11kW | Power and speed adjustment through pressure measurement | Powder extinguisher instead of water extinguisher • Max. air flow rate: 8000 m³/h Iodjxm Swfopfx Ag Noih • Nominal air flow rate: 20 m/sec, 6920 m³/h • Vacuum: 2630 Pa • Filter (surface) area: 71 m² • Extraction port diameter: 350 mm • Remaining dust concentration, returned airflow quality:

Condition: excellent (used), Thickness planer Felder D963 Max. planing width: 630 mm, Max. planing height: 300 mm, Spiral cutterhead, two rows, Electric height adjustment with readout, Variable speed control, 7.3 kW motor, Machine in very good condition. Iodpfx Agsxdmu Tj Noih

Condition: good (used), Year of construction: 2005, functionality: fully functional, number of planer blades: 4, power: 7.5 kW (10.20 HP), blade shaft diameter: 120 mm, table width: 510 mm, Equipment: motor brake, The planer is in very good condition, has always been reliable and has run well. Thanks to the parallel fence, it is very space-saving! The planer knife guard is included! Iodpfx Agjxdhifj Noih

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: 320.03.003.13, travel distance X-axis: 4,050 mm, travel distance Y-axis: 2,560 mm, travel distance Z-axis: 280 mm, rapid traverse X-axis: 100 m/min, rapid traverse Y-axis: 100 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 3,120 mm, feed length Y-axis: 2,160 mm, feed length Z-axis: 105 mm, feed rate X-axis: 25 m/min, feed rate Y-axis: 25 m/min, feed rate Z-axis: 15 m/min, nominal power (apparent): 11 kVA, torque: 4 Nm, controller manufacturer: WoodFlash CAD, H10 CNC Control, controller model: H10 CNC Control, Windows 10, workpiece length (max.): 3,120 mm, workpiece width (max.): 2,160 mm, workpiece height (max.): 105 mm, total height: 2,510 mm, total length: 7,760 mm, total width: 4,860 mm, rotational speed (min.): 1,000 rpm, rotational speed (max.): 24,000 rpm, overall weight: 3,800 kg, spindle motor power: 10,000 W, number of spindles: 1, number of slots in tool magazine: 8, tool length: 300 mm, tool diameter: 180 mm, tool weight: 1,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, Engine power: 13.59 PS/HP (10 kW) Year of manufacture: 2013 Motor voltage: 3x 400 V Motor frequency: 50 Hz Weight (kg): 3800 Ijdpfx Agew Tkm To Njih Dimensions (L x W x H mm): 8768x4864x2510

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, FELDER G330 Edge Bander Used edge bander, post-service inspection. - Machine in excellent technical condition. - Year of manufacture: 2013. - One-owner machine. - Recently serviced. EQUIPMENT: Electrical equipment: - Supply voltage: 3x 400 V - Power frequency: 50 Hz Workpiece dimensions: - Edge thickness: 0.4 – 3.0 mm - Workpiece thickness: 10 – 45 mm - Minimum workpiece width: 70 mm - Minimum workpiece length: 210 mm Units: - Edge feeding from coil via feed plate - Edge feeding for thicknesses 0.4–3 mm, manual feed for individual edging strips - Guillotine shear for trimming coil edges up to 3 mm thick - Gluing unit for hot-melt granulate adhesive, Teflon-coated glue pot - Spring-loaded pressure unit, 1 straight pressure roller and 1 pressing roller - Saw trimming unit: 9,000 rpm, 0.18 kW, HW saw blades Z=16, Ø 80 mm - Multifunctional milling unit: 12,000 rpm, 0.22 kW, for rounding, straight milling, and chamfering - Mechanically-activated corner scraper unit for R=2 mm - Mechanically-activated flat scraper unit Operation: - Control panel with LCD display and keypad - Quick, tool-free unit adjustment system Feed: - Workpiece feed with chain-type conveyor - Feed speed: 8 m/min - Extendable support General data: - Extraction port Ø 120 mm Overall dimensions: - Length: 2,000 mm - Width: 800 mm Iisdpfx Ajxly I Asg Nsh - Height: 1,500 mm - Weight: 360 kg Machine financing available via leasing or installments. Just visit our website: jbsmaszyny.pl We invite you to test the machine. Where to see our machines? JBS WOODWORKING MACHINERY WOLICA DRUGA 26 23-310 MODLIBORZYCE, Poland Nationwide machine transport! Phone: 663 495 647 (German) Phone: 664 335 475 (English) Phone: 530 632 386 (English)

Condition: excellent (used), Year of construction: 2018, Edge bander Isdjwrqk Djpfx Ag Nsih Manufacturer: Felder Type: G360 Year of manufacture: 2018 Operating hours: approx. 1,288 h Edge thickness: 0.4 - 3 mm Workpiece thickness: 10 - 45 mm Feed: 8 m/min Total power: 5.5 kW Total length: approx. 3,200 mm Jointing unit: Yes Cross-cut saw unit: Yes Flush milling unit: Yes Surface scraper: Yes

Condition: used, functionality: fully functional, type of input current: three-phase, Felder RL-300 clean air extraction unit with a maximum air flow rate of 6,000 m³/h. The extraction unit is in as-new condition and has very low working hours. Technical specifications: - Extraction capacity: 6,000 m³/h - Maximum negative pressure: 2,450 Pa - Extraction connection diameter: 300 mm - Chip container volume: 2 x 210 liters - Dimensions: 3,015 x 970 x 2,280 mm (L x W x H) - Automatic extinguishing system - Steel impeller Iiedpfsxm Suwsx Ag Nsh - Motor power: 8.2 kW The clean air unit is located in Estonia and can be inspected at any time during our business hours. Related terms: extraction, extraction unit, clean air unit, clean air, RL

Condition: like new (used), Year of construction: 2023, operating hours: 100 h, functionality: fully functional, travel distance X-axis: 3,260 mm, travel distance Y-axis: 1,630 mm, travel distance Z-axis: 225 mm, rapid traverse X-axis: 25 m/min, rapid traverse Y-axis: 25 m/min, rapid traverse Z-axis: 15 m/min, feed length X-axis: 25 mm, feed length Y-axis: 25 mm, feed length Z-axis: 15 mm, feed rate X-axis: 25 m/min, feed rate Y-axis: 25 m/min, feed rate Z-axis: 15 m/min, nominal power (apparent): 12 kVA, controller manufacturer: FELDER / FORMAT-4, controller model: Woodflash Control, workpiece length (max.): 2,500 mm, workpiece width (max.): 1,250 mm, workpiece height (max.): 85 mm, total length: 4,000 mm, total width: 2,300 mm, overall weight: 2,460 kg, spindle speed (min.): 1,000 rpm, spindle speed (max.): 24,000 rpm, operating hours of spindle: 100 h, spindle motor power: 10,000 W, spindle mount: MK 6, number of spindles: 1, number of slots in tool magazine: 8, tool diameter: 100 mm, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, We are selling a complete production package consisting of a high-precision CNC machining center Format-4 profit H08 13.25 P and the powerful clean air extraction unit Felder RL 250. Ideal for processing solid wood, panel materials, and plastics. Iiodpfow I Sfaox Ag Njh

Condition: used, Albatros Numerical Control with TPA CAD Software Working range on X-axis mm 3260 Working range on Y axis mm 1200 Working range in Z-axis N ° 2 work fields Bar worktop No. 6 electronically adjustable bars by C.N. Line laser for virtual 0 position in Y direction N° 4 pneumatic Bakelite bars for lifting the panel No. 3 electronically adjustable suction cups by C.N. for each bar with vacuum seal for fixing the panel during processing No. 1 vertical electrospindle with C-axis, with automatic tool changer with No. 10 positions, Hsk type cones Automatic tool change system with 12 positions - positioned on the machine side Drilling head with 17 spindles arranged as follows: - No. 8 verticals on X axis - N° 5 verticals in Y axis - No. 2 horizontal on X axis - N° 2 horizontal in Y axis No. 2 blade groups for making grooves on the X and Y axes Front protection and safety system with carpets Automatic lubrication system (Air conditioning system for cooling and cleaning of machine control) Vacuum pump mc/h 250 Iiodpfxjvph Hxj Ag Nsh

Condition: used, Felder Format 4 Kappa 450 sliding table saw Heavy-duty precision sliding table saw Scoring unit 5.5 kW motor Saw blade tiltable from 90° to 46° Electric angle and height adjustment Saw blade diameter up to 450 mm Trimming length 3200 mm Cutting width with parallel stop 1200 mm Year of manufacture 2005 CE-certified version Machine from carpentry liquidation/retirement in VERY GOOD CONDITION Iiedpfxow Ekrne Ag Neh from carpentry shop

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Year of manufacture: 2007 4 kW motor with brake Max. planing dimension: 510 x 240 mm Feed speed: 4 - 16 m/min Electric table height adjustment 4-knife cutter block including 4 new reversible planer knives, 510 mm With table extension and operating manual Tilting fence up to 45 degrees Extraction connection: 140 mm Weight: 900 kg Iedpsw Rycfefx Ag Nsih Dimensions: 230 x 78 x 120 cm

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, total length: 3,350 mm, workpiece height (max.): 45 mm, total width: 1,510 mm, edge thickness (max.): 45 mm, total height: 1,640 mm, overall weight: 770 kg, extraction nozzle diameter: 60 mm, We offer for sale a professional edge banding machine with pre-milling unit of the company FELDER model G480. Below you will find some useful information about the machine: * Year of production - 2017 * Equipped with the Schugoma hot-air system for zero joints * Connected load - 7 kW * Edge thickness - 0.4-350 mm * Thickness of the sheets - 8-45 mm * Minimum width/length of the sheet - 70/210 mm * feed speed - 9 m/min * has a pre-milling and corner rounding unit * Automatic feeding of edges from a roll * Impact shears for PVC and ABS edges up to a thickness of 3 mm. * Teflon glue tank with a capacity of 1.2 kg. * Saw blade cutting unit with 12,000 rpm. * Rotating control panel with LCD display. * Suction nozzle - 7 x 60 mm * Weight approx. 770 kg * Overall dimensions 335 x 151 x 164 cm (Wx Lx H) * Perfect technical and visual condition Iiedpjtp T Dtsfx Ag Nsh

Condition: ready for operation (used), Year of construction: 2016, operating hours: 5,213 h, functionality: fully functional, machine/vehicle number: 302.09.016.16, travel distance X-axis: 4,010 mm, travel distance Y-axis: 1,970 mm, travel distance Z-axis: 455 mm, number of slots in tool magazine: 18, saw blade diameter: 350 mm, TECHNICAL DETAILS Number of axes: 5 Table dimensions (L × W): 5,000 × 1,550 mm X-axis working area: 4,010 mm Y-axis working area: 1,970 mm Z-axis working area: 455 mm Travel speeds X-axis travel speed: 70 m/min Y-axis travel speed: 70 m/min Z-axis travel speed: 23 m/min Tool and saw unit Tool changer: 18 positions Saw blade diameter: 350 mm Extraction and vacuum Vacuum pump capacity: 90 m³/h Extraction connection diameter: 300 mm Extraction capacity: 5,100 m³/h MACHINE DETAILS Operating hours: 5,213 h Voltage: 400 V Current consumption: 46 A Air pressure: 8 bar Machine weight: 4,100 kg EQUIPMENT Iedpfowkq Tpex Ag Noih - Wood Flash software - 3D simulator included - Documentation available - CE marking present - Note: Vacuum pump bearings must be replaced

Year of construction: 2013, condition: excellent (used), Caracteristică Valoare / descriere Funcție aplicare cant pe borduri / plăci Lungime totală 2 444 mm (≈ 2,44 m) Sistem de alimentare transport pe lanț (“chain conveyor”) Reglaje rapide (“Quick‑Set”) da — pentru adaptarea la grosimea cantului Buncăr / rezervor de adeziv Teflon coated, capacitate 1,2 kg Grosimea cantului suportată ~ 0,4 – 3 mm (pentru cant în rolă) Grosimea plăcii (piesei de lucru) 10 – 45 mm Lățimea minimă piesă ~ 70 mm Lungimea minimă piesă ~ 210 mm Viteza de alimentare ~ 8 m/min Greutate estimată ~ 350 kg Diametrul tubului de aspirare ~ 120 mm Isdpsxga Npsfx Ag Nsih

Condition: good (used), Year of construction: 2006, 3 XYZ axes Iiedpfow Iluhex Ag Noh beam table with suction cups fencing included in the set sold without tools

Condition: good (used), Year of construction: 2023, functionality: fully functional, cutting length (max.): 3,700 mm, cutting width (max.): 1,250 mm, cutting width at rip fence: 1,250 mm, cutting height (max.): 155 mm, saw blade diameter: 450 mm, table length: 3,700 mm, main saw diameter: 450 mm, height adjustment type: electric, rotational speed (min.): 3,500 rpm, rotational speed (max.): 5,500 rpm, input voltage: 400 V, pivoting range: 45 °, input frequency: 50 Hz, power: 5.5 kW (7.48 HP), sliding table length: 3,700 mm, Equipment: motor brake, scorer, Newly used Felder K945S sliding table saw with 3,700 mm roller table, well equipped and in working order! 3,700 mm X-roll roller table Remote control on/off switch Digital readout window, cutting width up to 1,250 mm Iodpfx Aewath Usg Njih PowerDrive K2 pack for height and angle adjustment Scoring unit, electric height adjustment 7.5 hp, up to 450 mm saw blade Scoring unit with its own motor, 120 mm blade diameter Narrow and wide hood Swivels up to 45 (45.3) degrees Immediately available from stock.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Year of manufacture: 2011 Total connected load: 7 kW Jointing milling unit: 2 x 1.1 kW 12,000 rpm Edge gluing End trimming shear Iodpfx Agjw Rxfxe Njih End trimming saw unit Flush and radius milling unit Radius scraper blade Edge thickness: 0.4 – 3 mm Workpiece feed: 9 m/min Workpiece thickness min./max.: 8–45 mm Extraction connection: 120 mm Including operating manual Dimensions: 320 x 90 x 160 cm Weight: 560 kg

Condition: excellent (used), For sale is a used Felder AD5-31 jointer-thicknesser with a planing length of 1500 mm. The machine is used as a demonstration unit in our showroom and is therefore in like-new condition. Technical data: - 4-knife cutterblock - Planing width 310 mm - Planing length 1500 mm - Max. workpiece height 230 mm Iedpfx Aow Hcygog Njih - Suction port Ø 120 mm - Motor power 4 kW / 5.4 HP - Year of manufacture 2022 The machine is located at A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Contact: Tel. 06244-20299. Related terms: jointer, thicknesser, planer, jointer-planer, thickness planer Reference: R-A0117

Condition: excellent (used), Year of construction: 2007, FELDER G560 edgebander, pre-cutter - pre-milling - year of production 2007 - DTR and CE TECHNICAL SPECIFICATIONS: Iodpfx Aehu Rv Nsg Neih edge thickness 0.4-5 mm thickness of the glued element 10 - 60 mm feed speed 9 m / min engine power of each cutter 0.35 kW total power 5 kW air consumption 150 l / min pre-milling cutting the material up and down milling radial cyclin polishers dimensions (length / width / height) 325/150/160 cm weight 750 kg

Condition: excellent (used), Felder G330 Feature Specification / Description Machine length / installation length ~ 2444 mm (≈ 2.44 m) Edge (band) thickness ~ 0.4 mm up to ~ 3.0 mm (some sources say up to 5 mm for stick edges) Workpiece (panel) thickness ~ 10 mm to 45 mm Minimum workpiece size ~ 210 mm length; ~ 70 mm width Feed speed / advance speed 8 m/min in many listings Motors / Power 5.5 kW (for some used models) 3×400 V, 50 Hz is a common power configuration Glue pot Teflon‑coated glue pot, capacity ~ 1.2 kg glue Cutting / Trimming / Milling features Pneumatic guillotine cutters for end cuts Quick‑Set system for switching between flush, beveled, or radius trimming Radius scraping unit, glue scraping unit, buffing unit (optional) Dust / vacuum connection 120 mm vacuum connection (Ø 120 mm) este într-o stare perfectă de funcționare Iiodexga Skepfx Ag Nsh

Condition: ready for operation (used), Year of construction: 2012, operating hours: 1,555 h, machine/vehicle number: CA.03.013.12, Edge banding machine FELDER G400, used machine / condition as coming in from customer. Machine is functional tested and OK. Without service / warranty for this price. Iisdpfjng H Uvjx Ag Nsh Free loaded into your truck/trailer. Directly available ex works Barneveld (NL)

Condition: like new (used), For sale is a used Felder AD7-41 surface-planer thicknesser with a planing thickness up to 230 mm. The machine is in use as a demonstration unit in our showroom and is therefore in like-new condition. Technical specifications: - 4-knife cutterblock - Planing width: 410 mm - Table length: 2000 mm - Max. workpiece height: 230 mm Iodpfx Agjw Hckrj Njih - Electric thickness adjustment PowerDrive - Extraction port Ø 120 mm - Motor power: 4 kW / 5.4 HP - Year of manufacture: 2023 The machine is located in A-5431 Kuchl and can be inspected during our business hours at any time. Subject to prior sale! For information call 06244-20299. Related terms: surface planer, thickness planer, planing machine, jointer, thicknesser Reference: R-A0117

Condition: like new (used), functionality: fully functional, Felder 4-in-1 Combination Machine CF7-41 Professional For sale is a used Felder CF7-41 Professional combination machine with a cutting length of 2050 mm and a Felder system planer cutterblock. The machine is used as a demonstration unit in our showroom and is therefore in like-new condition. Technical specifications: - Cutting length: 2050 mm - Cutting height: 103 mm - Maximum saw blade diameter: 315 mm - Four milling speeds - Height-adjustable and tilting - Four-knife Felder system planer cutterblock Iodpfx Aew Hbq Djg Nsih - Planing width: 410 mm - 3 motors, each 5.5 kW / 7.5 HP - Year of manufacture: 2023 The machine is located in A-5431 Kuchl and can be inspected during our business hours at any time. Subject to prior sale! For information, call Tel. 06244-20299 Related terms: combination machine, combined machine, planer, thicknesser, thicknessing machine, circular saw Reference: R-A0117