Used Felder Fd 921 for sale (158)

Condition: good (used), Year of construction: 2017, functionality: fully functional, operating hours: 130 h, power: 6.5 kW (8.84 HP), input voltage: 400 V, input frequency: 50 Hz, Further technical data Edge thickness: 0.4–3 mm Workpiece height: 10–45 mm Chain feed with 8 m/min Total running length: 5,864 linear meters Jointing unit with max. 2 mm material removal Strip edgebander in single-feed operation Guillotine for hard PVC/ABS up to 3 mm thickness Teflon-coated glue pot, 1.2 kg capacity, with glue roller End trimming unit, 0.18 kW Extraction connections: 2x 80 mm, 1x 120 mm 2x HW saw blades, D-80 mm, Z16 Multi-milling unit with 12,000 rpm and 0.22 kW, 'Quickset' system for radius, flush and chamfer milling Control panel with LCD display and keypad Extendable workpiece support, extendable up to 450 mm Manually adjustable workpiece height: 10–45 mm Rotary table for edge banding rolls Minimum workpiece width: 70 mm Minimum workpiece length: 210 mm Extendable workpiece support, extendable up to 450 mm Manually adjustable workpiece height: 10–45 mm Ksdpfx Asyfvhaoh Dodr Additional equipment: Surface scraper, mechanically engageable Radius scraper knife

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Preliminary milling unit Edge banding glue station for granules Capability to glue edge banding from 8-60 mm Kodpfx Ahozqapkj Dedr Feed rate of 11 m per minute Control panel with temperature setting Preliminary trimming of edge banding from a roll Guillotine for trimming edge banding from a roll Pressing zone with three rollers Cutting wheels to trim excess edge banding on the edges Top/bottom milling unit with profiled milling cutters Profiled sanding unit Flat sanding unit Corner milling unit Polishing unit Year of manufacture: 2013

Condition: excellent (used), Felder TEMPORA F400 edge banding machine Pre-milling cutters, Glue application via roller, Replaceable tank Tank capacity 1.5 kg Heating time 10 min Pneumatic guillotine for pre-trimming Liquids Ready-to-use trimming balls Up-and-down milling unit R1-R2 Corner rounding unit, Profile trimming cutter Flat trimming cutter, Cleaning fluids Kdsdpfx Ahszfiqte Djr Polisher, Max element height 48 mm, Max edge band thickness in roll 3 mm, Feed rate 12 m/min In my opinion, the technical condition is very good. Year: 2024 Machine length: 423 cm Inspection and testing possible on-site.

Condition: like new (used), Year of construction: 2025, functionality: fully functional, For sale is a used Felder F-900 Z milling machine with a tenon and groove table length of 1300 mm. The machine is used as an exhibit in our showroom and is therefore in like-new condition. Technical data: - 5 milling speeds - Milling spindle can be swiveled 90° - 45° - Milling fence for tools up to Ø 230 mm - Multi-adjustment system - Tenon and groove table 1300 mm - Electrically adjustable in height + swiveling "PowerDrive" - Motor power 7.3 kW / 9.9 HP SD start - Year of manufacture 2025 The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: milling machine, milling Reference: R-D1618 Kjdjw Hfd Ijpfx Ah Djdr

Condition: excellent (used), Year of construction: 1999, operating hours: 650 h, functionality: fully functional, power: 4 kW (5.44 HP), Well-maintained, barely used, powerful professional machine with 5 combined functions. Numerous accessories included. Features a circular saw and table router with a sliding table, jointer and thickness planer, as well as a mortising machine. Kodjzn I Aaepfx Ah Dodr 5 motors, 360 V. The machine is available for sale immediately and is located in a ground-level basement in 23858 Reinfeld. Transportation is the responsibility of the buyer.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Motor power approx. 2.2 kW Kdodpfx Aoztxp Ieh Dsr 2 chip collection bags, each with a capacity of 200 liters, chip collection bags replaced Capacity of the system according to the manufacturer: 3,100 m³/h Quick-change system for chip collection bags Machine includes the following options: - Drive system - Dust extraction connections 120 & 80 mm Additionally available: - 1 additional set of new chip collection bags Space requirement approx. 1,300 x 520 mm Connection values: 400V, 3-phase, N

Condition: used, Year of construction: 2004, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 104 mm, cutting width (max.): 1,300 mm, saw blade diameter: 315 mm, tilt adjustment saw blade: 45 °, height adjustment type: electric, saw blade bore: 30 mm, actuation type: electric, Equipment: CE marking, saw blade guard, - Made in Austria - Year of manufacture: 2004 - X-Roll carriage guidance system - DTR and CE operating manual - Digital display for the parallel guide Kdsdpfx Aszinkyjh Djr TECHNICAL SPECIFICATIONS: - Carriage length: 2800 mm - Cutting width from the right side: 1300 mm - Blade diameter: max. 315 mm - Scorer diameter: 120 mm - Main motor: 4 kW - Scorer motor: 0.75 kW - Height adjustment motor: 0.5 kW - Electric height adjustment - Manual angle adjustment: 0° - 45° - Three types of blade rotational speed - Max. cutting height: 104 mm - Option to install a cutter: thickness: 6 - 20 mm - Max. diameter: 250 mm - Ratchet - Movable guard - Nozzle diameter: 80 and 120 mm - Dimensions (L/W/H): 320 / 210 / 170 cm - Weight: ~ 950 kg

Condition: excellent (used), Year of construction: 2023, DEMONSTRATION MACHINE! Ksdpfx Aoy Hgxmeh Dedr For sale is a used Felder KF 700 SP sliding table saw & spindle moulder with a cutting width of 800 mm. The machine is in excellent condition and has been refurbished and inspected by our professional staff. (Fully functional) Technical data: - Tilting circular saw and spindle moulder 90-45° - Sliding table 2500 mm - Extension table with mitre fence 2600 mm - Rip fence with fine adjustment - Cutting width 800 mm - Spindle fence with multi-adjustment system - 4 spindle speeds - 3 motors, each 7.5 HP (5.5 kW) - Automatic star-delta start The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: saw, circular saw, spindle moulder, combination machine, combi machine, milling machine Reference: R-D1618

Condition: excellent (used), Year of construction: 2003, WELL-MAINTAINED MACHINE FROM A HOBBY WOODWORKING SHOP Table dimensions: 990 x 750 mm Router spindle diameter: 30 mm Router spindle speed: 3,700 / 6,500 / 7,890 RPM Diameter of router tool, max.: 230 mm Router spindle can be tilted: 0 - 45 degrees Router spindle height above table, max.: 120 mm Motor: 5.5 kW Router spindle can be switched for clockwise/counterclockwise rotation Sliding table with additional table support Additional extraction hood as a replacement for the fence, e.g., for sanding Hold-down device / safety system, e.g., when routing narrow parts Weight: approx. 540 kg Dust extraction connections: 1 x 120 mm, 1 x 80 mm Kodpeznk Iljfx Ah Djdr Optionally available: 3-roller feed device FELDER F-34, item no. 4754

Condition: excellent (used), functionality: fully functional, !!!DEMO MACHINE!!! For sale is a used Felder combination machine CF5-31 with a maximum thickness of up to 230 mm. The machine is in very good condition and has been refurbished and inspected by our qualified personnel. (fully functional) Technical data: - Planing and thicknessing width 310 mm - 4-knife cutterblock (reversible knives) Kdsdpfx Ahszliiij Der - Thickness capacity 4-230 mm - Folding planing table - Adjustable planing fence 90-45° - Tilting circular saw and router 90-45° - Sliding table 1300 mm - Miter fence 1300 mm - 4 router speeds 3000/6000/8000/10000 rpm - Router fence 230 mm - 3 motors, each 5.5 hp (4 kW), 400 volts - Machine No. 440.10.242.17 The combination machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: Planer, thicknesser, thickness, Felder, router, routing machine, circular saw, saw Reference: R-D1618

Condition: ready for operation (used), Year of construction: 2008, workpiece width (max.): 60 mm, total height: 1,550 mm, total width: 1,100 mm, overall weight: 750 kg, product length (max.): 3,200 mm, Edgebander manufactured in 2008. This FELDER G500 features an edge thickness capability of 0.4–5.0 mm, with an optional 8 mm. It accommodates workpiece thicknesses from 8 to 60 mm and offers a feed speed of 11 m/min. The machine includes automatic edge feeding, a Teflon-coated glue roller, and multiple finishing positions. If you are looking to get high-quality edging capabilities, consider the FELDER G500 edgebander we have for sale. Contact us for further details. Machine • FELDER G 500 Edgebanding Machine • Voltage: 400 V • Frequency: 50 Hz • Phase: 3N • Current: 14 A • Power: 5.5 kW • Edge Thickness: 0.4–5.0 mm (optional 8 mm) • Workpiece Thickness: 8–60 mm • Minimum Workpiece Width: 70 mm • Minimum Workpiece Length: 140 mm • Automatic Edge Feeding • Strip Magazine • Coil Diameter: Ø800 mm • Suitable Edge Materials: PVC, ABS, Solid Wood Veneer • Glue Pot Capacity: 2 kg • Glue System: EVA Hot-Melt Granulate • Teflon-Coated Glue Pot • Glue Pot Heating Time: Approx. 12 min • Automatic Glue Temperature Reduction • Pressure Unit with 1 Straight Pressure Roller and 2 Conical Pressure Rollers • End Trimming Unit • Flush & Radius Trimming Unit • Free Finishing Positions: 3 • Chain Conveyor Feed System Kdedpfszugwvjx Ah Dsr • Feed Speed: 9 m/min • Extraction Connection: Ø120 mm • Machine Length: 3,200 mm • Machine Weight: 750 kg Additional Equipment • Scraper Unit (mechanically adjustable for R = 2 mm) • Buffing Unit • 2 Motors • 1,400 rpm • 900 W Technical Specification Feed Speed 11 m/min

Condition: excellent (used), Year of construction: 2025, Format 4 Kappa 450 x-Motion 2-axis control, height and tilt adjustment Technical data: - Cutting length: 2800 mm Kdodpfx Aoy Rp D Toh Der - Cutting width: 1300 mm - Cutting height: 155 mm - Max. saw blade Ø 450 mm - X-motion control - Angle scale with length compensation - Extractable Ø 120 mm - Motor power: 10 kW - Year of construction: 2025 Duplex mitre fence

Condition: good (used), Year of construction: 2016, - Table length (mm): approx. 3000 - Power (kW): 5.5 - Scorer: included Kedpfx Asy Tm Twoh Dedr - Saw blade: swiveling

Condition: used, Year of construction: 2019, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, planing width: 630 mm, tool diameter: 120 mm, number of blades: 96, actuation type: electric, Equipment: CE marking, - Year of manufacture: 2019. - Condition: very good. TECHNICAL SPECIFICATIONS: - Planing width: 630 mm - Planing height: 3-300 mm - Digital control of table height with display - Motor: 7.35 kW - Maximum chip thickness: up to 8 mm - Minimum workpiece length: 250 mm - Diameter of planing shaft: 120 mm - Silent-Power spiral shaft, i.e., very quiet with four-sided knives Kodpozim Rrjfx Ah Dodr - Self-aligning planing knives, i.e., no adjustment required after rotation - Additionally, 2 rollers in the table for processing wet or resinous wood - Smooth feed speed adjustment from 4-16 m/min - Power supply: 3 x 400 V - Diameter of dust extraction port: 160 mm - Weight: 845 kg - Dimensions (L / W / H): 125 x 115 x 114 cm

Condition: good (used), Year of construction: 2017, - Milling spindle swivel range: 90 degrees / 45 degrees Kodpfsy Tm Rpjx Ah Dedr - Spare milling spindle: included

Year of construction: 2006, condition: used, functionality: fully functional, Planer, jointer FELDER plan51 Specification: • Condition – used, after inspection • Manufacturer – FELDER • Model – plan51 • Working width – 510 mm • Table length – 2250 mm • Adjustable tilting fence • Motor power – 7.35 kW • Spindle speed – 5000 rpm • Chip thickness indicator • Max cutting depth – 8 mm • Noise-reducing combs at the shaft • Motor brake • 4-knife shaft, 120 mm diameter, compatible with Tersa knives • Start/stop 0-1 • Chip extraction outlet – diameter 140 mm • Year of manufacture – 2006 • Overall dimensions: 225 x 105 x 125 cm (L x W x H) Kedpfx Aoyy Sr Soh Djdr Additional information: • The machine is in perfect technical condition and ready for immediate use • Photos shown reflect the actual condition of the item • Possibility to run and test the machine on site • Free operator training provided at the company headquarters • Listed price does not include VAT or transport costs Financing and transport: • We organize transport via MDD fleet, courier services, or external carriers • Financing options available: lease or lease loan

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Press length without side pressing device: approx. 2,300 mm Press length with side pressing device: approx. 2,100 mm Kjdpfx Aszn Iwqsh Dedr Press width, max.: approx. 1,400 mm 4 pcs. vertical pressing units, adjustable, each with 1 crank drive pressing unit, and 1 counter piece 1 pcs. horizontal pressing unit with 2 crank drive pressing units 1 pcs. counter pressure rail, fixedly mounted on the left side 1 pcs. lower support rail with crank drive

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, For sale is a Felder F 700 table router in high-quality industrial design, including a Felder F38 3-roller feed system. The machine impresses with its robust construction, powerful drive, and precise adjustment options, making it ideal for professional use in carpentry and joinery workshops. Technical data: Manufacturer: Felder Type: F 700 Year of manufacture: 2012 Motor power: 7.35 kW Voltage: 400 volts Frequency: 50 Hz 3-phase design Router spindle adjustable by 45° Electronic height adjustment with digital display (mm/inch) Speed levels: 3,500 / 6,500 / 8,000 / 10,000 rpm Made in Austria Equipment: Kjdpfx Ajzm Rzieh Dodr Felder 3-roller feed system F 38 Swivel and height-adjustable feed system Sliding table Table extension Solid aluminum router fence Precise router fence adjustment Large cast iron table Digital display for router height Swivel indicator for the router spindle Emergency stop switch Professional industrial design The machine is in good used condition and shows only the usual signs of wear and tear due to age and use. It is ideally suited for daily professional use. An inspection and test run are possible at any time by appointment. Transportation is possible for an additional charge! The machine will be inspected before sale. Technical data and equipment may vary. Errors, prior sale and changes are subject to change. All information without guarantee.

Condition: good (used), Year of construction: 2023, For sale is a Felder RL-160 clean air extraction unit with a maximum airflow rate of 3200 m³/h. The extraction unit is in excellent condition and has been inspected and refurbished by our professional staff. (Fully functional) Technical data: - Max. airflow rate: 3200 m³/h - Filter area: 10 m² - Extraction connection diameter: 160 mm - Automatic filter cleaning - Antistatic filter - H3 dust tested - Year of manufacture: 2023 The clean air unit is located in A-5431 Kuchl and can be viewed at any time during our opening hours. Subject to prior sale! Kjdpfx Aexnxm Neh Dsdr Related terms: clean air unit, extraction unit, dust extraction, clean air, RL Reference: R-A0117

Condition: used, Year of construction: 2009, functionality: fully functional, working width: 950 mm, grinding width: 950 mm, - Austrian-made - Year of manufacture: 2009 - Combination pad (trzewik kombi) TECHNICAL PARAMETERS: - Sanding width: 950 mm - Sanding height: 4–170 mm - Main motor power: 11 kW - 1st unit: rubber drum with pneumatic engagement - Drum diameter: 110 mm - 2nd unit: combination pad (trzewik kombi) - Cleaning brush: 1.1 kW - Pneumatic engagement of rubber drum Kodpfx Asxlr U Ijh Dedr - Pad with pneumatic engagement - Pneumatic oscillation - Air blower on sanding belt - Electric height adjustment - Sanding belt speed controlled by inverter - Electronic positioning of sanding height - Two feed speeds: feed motor power 0.55 kW - Minimum workpiece length: 400 mm - Extraction port diameter: 3 x 130 mm and 2 x 80 mm - Machine dimensions (L/W/H): 170 x 150 x 210 cm - Weight: approx. 800 kg

Condition: used, Year of construction: 2010, Used machine Year of manufacture 2010 With joining unit and corner rounding unit Control panel with LCD display and keypad Joining unit with 2 counter-rotating diamond cutters With edge feeder for roll and strip material With glue roller and glue unit With pre-trimming from the roll With pressure unit With trimming unit with pulling trimming cut With flush and radius trimming unit Corner rounding unit for front edges Manual unit adjustment Edge thickness 0.4-5 mm Workpiece height 8-60 mm Min. workpiece width 70 mm Min. workpiece length 140 mm Feed speed 11 m/min Kdodpsw I H Rkofx Ah Der With radius scraper unit With flat scraper With polishing unit Extendable workpiece support Extraction connection 120 + 2 x 80 mm Weight approx. 990 kg L x W x H 4550 x 1550 x 1100 mm Availability: Short-term Storage location: Flörsheim

Condition: used, Year of construction: 2017, Max. cutting width: 4200 mm; max. cutting height: 2200 mm; saw blade diameter: 250 mm; max. processing thickness: 60 mm; saw blade bore: 30 mm; bottom support: plastic supports; material support: retractable plastic strips; measuring system: scale; saw head tilting: manual; saw feed: manual; mounting: free-standing; extraction: external; locking of saw beam: manual; approx. weight: 1000 kg; dimensions: 5600 x 1700 x 3000 mm; motor power: 4.2 kW. Storage location: Nattheim Kedpexg Igijfx Ah Dodr

Condition: ready for operation (used), Year of construction: 2014, machine/vehicle number: 432.07.383.14, functionality: fully functional, planing width: 410 mm, number of blades: 4, overall weight: 510 kg, Equipment: CE marking, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Planing width: 410 mm Planer cutterhead: 4-knife Felder system cutterhead Number of planing knives: 4 Kdodpfx Aszkt Itoh Dor Feed table length: 2,200 mm Fence: 1,300 x 170 mm MACHINE DETAILS Motor power: 5.5 kW Motor voltage: 400 V Chip removal: 5 mm Dust extraction connection: 120 mm Weight: 510 kg EQUIPMENT Cutterhead with 410 mm planing width Infeed table with table length of 1,080 mm Fence with ruler 1,300 x 170 mm Fence guard, EURO standard 4-knife Felder system cutterhead

Condition: excellent (used), Year of construction: 2020, Panel saw K 540 S incl. clean air extraction unit RL 140 Max. saw blade diameter: 400 mm Cutting width: 800 mm with full table length Max. cutting height: 140 mm Kodpfx Ahsyyaifs Djdr Cutting length: 3200 mm Angle adjustment: manual

Condition: used, Year of construction: 2000, Second-hand machine Year of manufacture: 2000 Kdedpfxozk Nx Uj Ah Dor Features and technical specifications: - Milling unit spindle height adjustable via handwheel 0–125 mm - Milling spindle swivel up to 45° via handwheel - Swivel angle display via digital readout - Tenon and slot table Z - anodised, table length 1000 mm - Milling stop 240 - Milling stop rails 450, aluminium, anodised - with 3-roller feed mechanism Availability: at short notice Location: 63934 Flörsheim