Used Felder Machinary for sale (116)

Condition: like new (used), For sale is a used Felder spindle moulder F-900 Z with mortising and slotting table length of 1300 mm. The machine is used as a demonstration unit in our showroom and is therefore in like-new condition. Technical data: - 5 spindle speeds - Spindle tiltable 90° - 45° - Fence for tooling up to Ø 230 mm - Multi-adjustment system - Mortising and slotting table 1300 mm Ncsdpfow Hfd Iex Adtsr - Electrically height-adjustable and tiltable with "PowerDrive" - Motor power 7.3 kW / 9.9 HP SD-Start - Year of manufacture: 2022 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Info Tel. 06244-20299. Related terms: spindle moulder, milling machine, moulding Reference: R-A0117

Condition: like new (used), Year of construction: 2024, machine/vehicle number: 35.09.021.24, functionality: fully functional, operating hours: 285 h, power: 11 kW (14.96 HP), input voltage: 400 V, input current: 22 A, input frequency: 50 Hz, type of input current: three-phase, volume flow: 8,000 m³/h, intake vacuum (max.): 30 mbar, suction capacity: 9,000 m³/h, intake manifold diameter: 350 mm, filter area: 16 m², noise level: 76 dB, actuation type: electric, total height: 2,260 mm, total length: 2,275 mm, total width: 1,140 mm, overall weight: 350 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, Dear Sir or Madam, Ncodpfxsyu Hw Dj Adtor Due to an upcoming company takeover and the expansion of our joinery, we are selling our Felder extraction system, which is only 1.5 years old. The machine is in like-new condition and has all inspection and testing documentation available. Should you have any further questions, we are at your disposal. Information: Commercial and industrial woodworkers benefit from Felder clean air extraction units, tested for wood dust, available in various price and performance categories. Mobile and space-saving, the RL 125, RL 140, RL 160, RL 200, RL 250, RL 300, and RL 350 models offer flexibility and top performance in minimum space. All models achieve a residual dust content of less than 0.1 mg/m³, meeting dust class H3 requirements. Unlike conventional extraction systems, Felder positions the fan on the clean air side, generating a negative pressure throughout the system and preventing dust leakage in case of leaks. Performance and speed adjustment via negative pressure measurement - Chip containers The longitudinally mounted chip containers ensure optimal filling of the chip bags. The optimized fastening system allows for quick bag changes. - Cartridge filters Greater filter area with similar space requirements Reduced filter load Maximized filter service life - JET cleaning system Continuous jet pulses of compressed air clean the filter automatically, ensuring consistently optimal extraction performance. - Machine connections High standard: water fire extinguisher and pneumatic filter cleaning. Optional: powder fire extinguisher. Further information can be found in the attached diagrams. This machine can be inspected and tested on site. ! This item is being sold used by our company. Exchange, return, and warranty are excluded!

Condition: ready for operation (used), functionality: fully functional, power: 7.35 kW (9.99 HP), 2-speed (Vario) feed gearbox 4-spindle thickness table guide Electric thickness table adjustment Ncsdoyzc Efepfx Adtsr

Year of construction: 2021, condition: ready for operation (used), This Felder RL 300 was manufactured in 2021. It features a new extraction system, never used, with a maximum volume flow of 6000 m3/h and a nominal volume flow at 20 m/s of 5090 m3/h. The machine includes a filter area of 50 m2 and dual 250-liter chip collection containers. Sound pressure level is at 75 dB. For more information about this machine, please reach out to us. • Volume flow: Max 6000 m3/h • Nominal volume flow 20 m/s: 5090 m3/h • Negative pressure at total connection at 20 m/s: 2680 Pa • Extraction connection: Ø 300 mm Ncodpfjx D Ex Rsx Adtjr • Filter area: 50 m2 • Sound pressure: 75 dB • Chip collection container: 2 x 250 liters • Extraction connection can be mounted on the left or right

Condition: ready for operation (used), Year of construction: 2021, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,670 mm, travel distance Z-axis: 500 mm, number of axes: 4, This 4-axis CNC processing center was manufactured in 2020. It features a 12 kW milling spindle with a speed range of 1000-24000 rpm and a C-axis rotation of 0-360°. The machine includes a 12-station linear tool changer and a comprehensive drill head with 16 spindles. It also boasts a robust safety system with a light barrier. Consider the opportunity to buy this Felder Format 4 Profit H 200 CNC processing center. Contact us for more information about this machine. • Automatic central lubrication • Working area: X 3300 mm / Y 1280 mm / Z 250 mm (clearance height from console level depends on clamping system) • Operating terminal on left side of machine • Hand terminal with axis speed control and emergency stop Njdjx D D Hmjpfx Adtecr • Software: Woodflash (CNC board, tool database, program editor) • Positioning display for workpiece support and vacuum suction cups • Vacuum connection for template milling (left side), connection diameter 12 mm • Vacuum pump: 1x, total suction power 90 m³/h @ 50 Hz or 108 m³/h @ 60 Hz • Milling spindle: 12 kW (S6), HSK F63, 1000–24,000 rpm, full rated power at ~12,000 rpm, air-cooled; C-axis 0–360° • Tool changer: 12-station linear on left side of machine stand, incl. pickup space for aggregates; max tool diameter 250 mm; max tool length 240 mm • Drill head DH 16 4H 2S: 12 vertical spindles (7X / 5Y); 4 horizontal spindles (2X / 2Y); pre-stroke 70 mm; drilling length 70 mm; shank Ø 10 mm • Groove saws: 2 (one X, one Y); max blade Ø 120 mm; max thickness 5 mm; continuously variable speed up to 7,500 rpm • Safety: front light barrier system

Condition: ready for operation (used), Year of construction: 2013, operating hours: 20 h, working width: 650 mm, Belt sander manufactured in 2013. This FELDER FW 650 features a working width of 650 mm and a powerful 7.5 kW motor. It includes a variable feed speed ranging from 3.7 to 16 m/min and an automatic belt centering system. The machine comes with interchangeable sanding pads and a rubber contact roller. If you are looking to get high-quality sanding capabilities, consider the FELDER FW 650 machine we have for sale. Contact us for further details. • Sanding belt dimension: 670 × 1900 mm • Motor power: 7.5 kW (upgraded from 5.5 kW) • Voltage: 3 × 400 V • Duty type: S1 • Variable feed speed: 3.7–16 m/min • 1 combination aggregate • Interchangeable sanding pad • Rubber contact roller: 85 Shore • Electropneumatic sanding shoe • 2nd feed speed • Automatic belt centering • Automatic star-delta start (SD start) • Extraction connection: 120 mm • Control: Conventional (non-CNC) • Minimum transport height: 2370 mm • Minimum transport width: 2200 mm Additional equipment • Double-sided roller table extension • Abrasive belts included: • 670 × 1900 mm K80 (12 pcs) • 670 × 1900 mm K120 (12 pcs) Ncsdpfsyli H Asx Adtor

Condition: ready for operation (used), Year of construction: 2021, This Felder FW 1102 P was manufactured in 2021. A used wide belt sander featuring a contact roller unit and a fine sanding with segmented electro-pneumatic sanding shoe. It includes a 7" touch color screen, digital grain compensation, and a vacuum table. The feed speed is variable from 2.5 to 18 m/min, sanding width of 1100 mm, and height range from 3 to 170 mm. Consider the opportunity to buy this Felder FW 1102 P belt sander. Contact us for more information. • Contact roller unit • Fine sanding with segmented, electro-pneumatic sanding shoe, 25 mm segment width • 7" color touch screen • Digital grain compensation • Vacuum table with blower integrated in the machine stand Njdpfxox D Eyhj Adtscr • Infinitely variable feed speed 2.5–18 m/min (controllable from the touch screen) • Sanding width: 1100 mm • Sanding height: 3–170 mm • Sanding length: 1900 mm

Condition: ready for operation (used), Year of construction: 2016, Felder clean air extraction unit | Dust extraction system RL 200 | Ø 200 mm Maximum flow rate: 4000 m³/h Nominal flow rate: 20 m/sec, 2300 m³/h Valve pressure: 2380 Pa Filter area: 20 m² Extraction connection diameter: 200 mm Residual dust content: < 0.1 mg/m³ Felder Briquetting Press FBP 50 Briquette diameter: 50 mm Throughput: 30–50 kg/h Nsdpjwa Rlkjfx Adtjcr Motor power: 4 kW Dimensions (L x W): 1750 x 1270 mm Weight: 950 kg Hydraulic oil capacity: 125 liters Year of manufacture: 2016 Condition: Ready for use Price: €15,500 The system has already been dismantled and is stored in the Raasdorf warehouse.

Condition: excellent (used), Year of construction: 2020, Panel saw K 540 S incl. clean air extraction unit RL 140 Ncodpfxjyyaife Adtsr Max. saw blade diameter: 400 mm Cutting width: 800 mm with full table length Max. cutting height: 140 mm Cutting length: 3200 mm Angle adjustment: manual

Condition: good (used), Year of construction: 2008, power: 5.5 kW (7.48 HP), type of input current: three-phase, cutting height (max.): 104 mm, Equipment: CE marking, documentation/manual, saw blade guard, scorer, I am selling a high-quality Felder panel saw, model K700, from 2008. The machine is in good, well-maintained condition and is fully functional. Ideal for joinery workshops, carpenters, or ambitious woodworkers. Technical data: + Manufacturer: Felder + Model: K700 + Year of manufacture: 2008 + Motor power: 5.5 kW + Voltage: 400 V (three-phase) + Saw blade diameter: up to approx. 315 mm + Cutting height: approx. 100 mm at 90° + Cutting height at 45°: approx. 70 mm + Main saw blade speed: approx. 4,000–5,000 rpm + Sliding table length: approx. 2,600 mm + Ripping length: according to sliding table + Rip fence: finely adjustable with scale + Mitre fence: with fence rail + Extraction port: available (top and bottom) Features: + Smooth-running, precise aluminium sliding table Ncsdpfoywlkiex Adtor + Sturdy cast iron table + Scoring unit (belt missing / never used) + Height and tilt adjustable saw blade (0–45°) + Safety guard with extraction + Precise cutting through stable fences + Low-maintenance and durable Other information: Inspection and test run available by appointment. Shipping by freight carrier possible. Loading assistance can be provided. Price: €4,950 If interested, please get in touch! 03904/40286

Condition: good (used), Year of construction: 1990, functionality: fully functional, planing width: 310 mm, cutting width at rip fence: 80 mm, Panel saw, milling machine, planer, mortising machine, combination woodworking machine, table saw, circular saw, joiner's saw, panel saw, table router, tilting spindle moulder Manufacturer: FELDER Model: BF6-31 Year of manufacture: 1990 Sliding carriage: 1.6 m Manual height adjustment for saw blade Manual tilting of the saw blade up to 45° Rip fence with fine adjustment up to approx. 80 cm Support table Mitre fence Main motor power: 3 kW Tilting spindle moulder Manual height adjustment of the spindle Manual spindle tilt up to 45° to the rear Spindle diameter: 30 mm 3 speeds, adjustable by belt Spindle retractable below table and removable Motor power of milling unit: 3 kW Milling fence with fine adjustment Surface and thickness planer Planing width: 31 cm Maximum workpiece height: approx. 22 cm Nodpfx Ajyzdnbjdtocr Central dust extraction hood for planing and thicknessing Tilting fence 2-knife Felder cutterblock system Motor power: 3 kW Mortiser Single-lever control Workpiece hold-down Chuck up to 16 mm

Condition: like new (used), Year of construction: 2023, machine/vehicle number: 606.09.020.23, functionality: fully functional, operating hours: 20 h, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 155 mm, cutting width (max.): 1,250 mm, saw blade diameter: 450 mm, tilt adjustment saw blade: 45 °, rotational speed (max.): 5,500 rpm, rotational speed (min.): 3,500 rpm, Equipment: CE marking, documentation/manual, We are offering this as-new Felder FORMAT-4 KAPPA 450 panel saw, year of manufacture 2023. Saw Unit: Blade diameter: 250 - 450 mm Saw blade tilt: 0° - 45° Cutting height at 90°: 155 mm Cutting height at 45°: 109 mm 3 speeds: 3500/4500/5500 rpm or 3500/4500 rpm with 10 kW option Nodjy Dfwcepfx Adtecr Sliding table with “X-ROLL” guide system Kappa 450 control system Special equipment: Motor 3x 400 V 50 Hz 5.5 kW S6 star-delta start, prepared for adjustable grooving tools up to 19.5 mm width, “X-Roll” sliding table, cutting length 3200 mm, cutting width 1250 mm, rip fence unit, HW aluminium saw blade D=300mm If you have any questions or need further information, please feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Edgebanding Machine Tempora F 60.06 - Year of manufacture: 2018 - Interchangeable glue pot Nodpfxox Ha I Uo Adtjcr - Units for pre-milling, end trimming, flush cutting, milling, radius scraping knives, flat scraping knives, buffing - Includes separation agent and cleaning agent application - Spray unit - Edge thickness: 0.4–6 mm - Installation length: 3220 mm - Saw trimming

Condition: used, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, workpiece height (max.): 45 mm, edge thickness (max.): 3 mm, feed rate X-axis: 7 m/min, The used FELDER G 460 is a compact and powerful edge banding machine designed for professional applications in crafts and small-scale industry. It enables precise edging and post-processing of edge materials, impressing with reliable technology, user-friendly operation, and high-quality workmanship results. Machine features: - Glue unit for hot-melt adhesive Ncodpsyyk Sqofx Adtjr - End trimming unit (front/rear) - Flush milling unit - Fine milling/radius unit - Combined radius and surface scraper unit - Sturdy machine construction Further technical data: - Edge thickness: approx. 0.4 – 3 mm - Workpiece height: approx. 10 – 45 mm

Condition: used, Year of construction: 2021, functionality: fully functional, power: 14 kW (19.03 HP), input voltage: 400 V, input current: 36 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 80 mm, cutting width (max.): 3,200 mm, overall weight: 4,200 kg, Equipment: documentation/manual, rotational speed infinitely variable, saw blade guard, scorer, We offer this used Felder kappa automatic 80 sliding table saw. Machine can be very fast in production if presented with an equally fast operator. The cuts are perfect, 90 degree angle is easy to adjust (and should be done regularly). We also offer all of the saw blades as well as undercutters we have to it. Model: kappa automatic 80 Voltage: 400 V Phases: 3 Ncjdpfx Aey Dda Aedtsr Frequency: 50 Hz Current: 36 A Power: 14.0 kW Year of construction: 2021 year Weight: 4200 kg If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, operating hours: 1,800 h, power: 19 kW (25.83 HP), input voltage: 400 V, input current: 40 A, input frequency: 50 Hz, type of input current: three-phase, travel distance X-axis: 3,500 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 250 mm, workpiece length (max.): 3,300 mm, workpiece width (max.): 1,280 mm, workpiece height (max.): 150 mm, number of axes: 4, number of slots in tool magazine: 41, controller manufacturer: Tpa Srl – Tecnologie e Prodotti per l'Automazione, actuation type: electric, Equipment: USB port, documentation/manual, We offer this very good FORMAT4 PROFIT H200 13.33 machining center. The machine is equipped with 4th axis spindle and max-version drilling head. It only worked about 1800 hours and has some small marks from usage. In the bundle we will provide everything that came with the machine as well as additional suction cups. Milling tools and holders are not a part of the deal FOR NOW. Machine is working daily and is an excellent choice for any woodworking company. Type designation: PROFIT H200 13.33 Serial number: 302.07.040.20 Code: 0491 Supply voltage: 400.0 V Phase: 3P+N Frequency: 50/60 Hz Current: 40.0 A Power: 19.0 kW Year of construction: 2020 year Control voltage: 24 VDC Minimum fuse: 47 A Maximum fuse: 64 A Nsdpfx Aey Dcvvodtocr Minimum compressed air pressure: 8 bar Air consumption: 350 Nl/min If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: ready for operation (used), machine/vehicle number: Sn96,5Ag3,0Cu0,5, functionality: unexamined, Felder Sn96.5Ag3.0Cu0.5 lead-free solder wire, 0.5 mm ! Sold only in lots of 10 pieces ! Manufacturer: Felder Ncodpfxoynhtaj Adtor Model/Alloy: Sn96.5Ag3.0Cu0.5 Net weight: ~0.25 kg

Condition: like new (used), Year of construction: 2024, Felder Edge Sander FS 700 K Oscillating sanding belt Technical specifications Dimensions [mm]: 1875 x 776 x 1437 Working height [mm]: 895 - 1024 Frequency [Hz]: 50 Weight [kg]: 295 Power [kW]: 3 Nodpfx Aey Amv Rsdtjcr Tilt angle [°]: 0-45 Sanding belt dimensions [mm]: 3000 x 200 Sanding belt speed [m/s]: 19 Voltage [V]: 3 x 400 Year of manufacture: 2024 Condition: very good Price

Condition: excellent (used), Year of construction: 2008, working width 510mm 4-knives shaft tables length 2250mm motor power 7,35kW angle regulated fence Ncjdpfx Aoy Dawkodter year 2008 iron cast tables

Condition: like new (used), Year of construction: 2023, Felder FST 160 Sanding Table Technical Data Njdpjy Agp Djfx Adtjcr Dimensions [mm]: 1660 x 1020 Working height [mm]: 726–1026 Extraction port diameter [mm]: 140 Year of manufacture: 2023 Price: 1100.-

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Carriage length: 3800 mm Scoring unit Electric adjustment of blade and scorer height and angle Electric positioning of right fence Touchscreen digital control panel Table equipped with additional blade switches Maximum blade diameter: 550 mm Total power: 7.35 kW Year of manufacture: 2014 Ncedpjymwy Tjfx Adtsr Power supply: 380 V

Condition: used, Year of construction: 2016, cutting height 133 mm tiltable sawblade 0-45° cutting width with rip fence 1250 mm Nodpsymcpmefx Adtscr motor 5,5 kw scorring unit cutting length 2500 mm machine avaiable from medio April

Condition: like new (used), Year of construction: 2022, machine/vehicle number: 425.10.047.22, functionality: fully functional, We offer this Felder K700 panel saw in like-new condition, year of manufacture 2022. Manufacturer: Felder Model: K700 Year of manufacture: 2022 Condition: like new X-Roll sliding table Scoring unit Nedpfx Adeyzfgletocr If you have any questions or require additional information, please contact us by message or phone.

Condition: like new (used), Year of construction: 2024, machine/vehicle number: 305.12.001.24, functionality: fully functional, operating hours: 282 h, travel distance X-axis: 3,260 mm, travel distance Y-axis: 1,630 mm, travel distance Z-axis: 225 mm, workpiece length (max.): 2,500 mm, workpiece width (max.): 1,250 mm, workpiece height (max.): 85 mm, number of axes: 3, number of slots in tool magazine: 8, actuation type: electric, total length: 3,260 mm, total width: 1,630 mm, table length: 2,500 mm, table width: 1,250 mm, Equipment: CE marking, For sale: CNC machining center PROFIT H08 13.25, year 2024 Technical data: Ncedpfxsyzfaxe Adtsr Axis travel: X = 3260 mm Y = 1630 mm Z = 225 mm Working area: X = 2500 mm Y = 1250 mm Z = 85 mm Equipment: Matrix worktable Stops around the working area Guide system in X, Y, and Z axes Automatic central lubrication High-performance vacuum system (180 m³/h) 10 kW HSK F63 electrospindle DH8 drilling head 8-position tool magazine (side-mounted on the machine frame) Control terminal for machine operation Electrical control cabinet CE-compliant safety system I can send a video of the machine in operation. Net price – VAT invoice 23%.

Condition: used, Year of construction: 2010, Used machine Year of manufacture 2010 With joining unit and corner rounding unit Control panel with LCD display and keypad Joining unit with 2 counter-rotating diamond cutters Ncedpfew I H Rkex Adtor With edge feeder for roll and strip material With glue roller and glue unit With pre-trimming from the roll With pressure unit With trimming unit with pulling trimming cut With flush and radius trimming unit Corner rounding unit for front edges Manual unit adjustment Edge thickness 0.4-5 mm Workpiece height 8-60 mm Min. workpiece width 70 mm Min. workpiece length 140 mm Feed speed 11 m/min With radius scraper unit With flat scraper With polishing unit Extendable workpiece support Extraction connection 120 + 2 x 80 mm Weight approx. 990 kg L x W x H 4550 x 1550 x 1100 mm Availability: Short-term Storage location: Flörsheim