Used Fit Centre for sale (7,428)

Condition: ready for operation (used), WMW Niles Ø 1400 x 2000 mm Distance between centers: 2000 mm Swing over bed: 1400 mm Swing over cross-slide: 1100 mm Rcjdpex Imlcjfx Ah Usk Swing in gap: 1800 mm Diametre of main spindle bore: 90 mm Power on main spindle: 14 kW Number of speeds: 382 rpm Chuck (3/4 pinch) -- diametre: 1200 mm

Year of construction: 2004, condition: good (used), Traverses X Y Z; 680 x 394 x 625mm, B axis -110/+ 65 degrees, C axis 0.001 degrees, pallet diameter 130mm, maximum workpiece diameter 300mm, maximum workpiece height 250mm, number of pallets 40, spindle taper BT40, 240 Station ATC, Rcedpfxom H Uyzo Ah Uok spindle speed 12000rpm, Fanuc G-Tech 16I control, through spindle coolant, and swarf conveyor.

Condition: ready for operation (used), Year of construction: 2005, Control Unit Brand HEIDENHAIN Main Drive Number of axis 5 Movement X-Axis Movement 270 mm Z-Axis Movement 250 mm Y-Axis Movement 240 mm B-Axis Min 110 º C-Axis Movement 360 º Rcodpfxex H A Nbo Ah Uok This 5-axis KERN HSPC EVO was manufactured in 2005. It features a spindle speed of 50,000 RPM, a tool magazine with 95 pieces, and a workpiece magazine with 24 pieces. The machine includes a Heidenhain iTNC530 control system and HSK 25 special holder. Note: the changer arm requires repair. If you are looking to get high-quality milling capabilities, consider the KERN HSPC EVO machine we have for sale. Contact us for more information. Application Types Milling

Condition: excellent (used), Year of construction: 2011, Harrison V390 Gap Bed Centre Lathe (2011) Max’ Distance Between Centres 1250mm Max’ Swing Over Bed 390mm Max’ Swing In Gap 585mm Spindle Bore 54mm Spindle Speeds 25-2500 rpm 415V, 3 Phase Electrics. Supplied with: Quick Change Tool Post 2 Axis DRO 3 Jaw Chuck 4 Jaw Chuck Coolant For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #79023 Machine Serial Number: 7V0355P Cost: £11,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Rcsdpex D Uf Tjfx Ah Uok Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 2015, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, controller manufacturer: Haas, workpiece weight (max.): 1,588 kg, total height: 3,023 mm, total length: 4,089 mm, total width: 3,353 mm, rotational speed (min.): 40 rpm, rotational speed (max.): 8,100 rpm, overall weight: 6,033 kg, Equipment: documentation/manual, CNC Vertical Machining Centre CNC Control Haas CNC Rcjdpfsx E S Iqex Ah Uek Table size 1.321 x 457 mm Table load 1.588 kg Number of pallets: 1 x Movement X-axis 1.270 mm Movement Y-axis 508 mm Movement Z-axis 635 mm Spindle taper MAS BT40 Spindle speed 40 - 8.100 1/min Spindle motor 22,4kW Magazin capacity 24 + 1 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 2004, Hurco VMX24S Vertical Machining Centre with Hurco Ultimax Control, table size 760mm x 510mm, 24 ATC, BT 40 Tooling, 8000rpm, travel X=610mm Y= 508mm Z= 610mm, Coolant Tank. S/No. H-2S061 (2004) Rcsdpfx Ahox Ahlqo Uok Location: This lot is located in Burton-on-Trent, UK. A charge of £350 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: ready for operation (used), empty load weight: 17,800 kg, total length: 11,000 mm, total height: 1,700 mm, Arlo Ø 1250 x 8000 mm Distance between centers: 8000 mm Swing over bed: 1250 mm Diametre of main spindle bore: 130 mm Power on main spindle: 21 kW Rcsdpox Enf Eofx Ah Ujk Number of speeds: 3 > 315 rpm Max weight between centers: 5 ton

Condition: good (used), Year of construction: 2012, 750mm Swing, 500mm max. machining diameter, 1300mm max turning length, 3000rpm main spindle, 65mm bar capacity, 8,000rpm milling 20kW, C axis 0.001 degrees, Y axis - 90/+120mm, 40 station ATC, , milling speed 4,000rpm, 30kW spindle motors, Rcedpfjxqyg Nex Ah Usk FANUC 31i control, 3 Jaw Power Chuck, Swarf Conveyor, Coolant, tool setter, parts catcher, barfeed unit.

Condition: ready for operation (used), Year of construction: 2014, operating hours: 60,000 h, Control Unit Brand HAAS Main Drive Number of axis 3 Spindle Speed 12000 RPM Tool taper BT 40 This 5-axis HAAS UMC-750 was manufactured in 2014. It features a vertical machining center with a 12000 rpm spindle, BT40 tooling, and a 70-tool holder capacity. Additional highlights include coolant through spindle, a probe, toolsetter, and high-speed machining capabilities. Consider the opportunity to buy this HAAS UMC-750 vertical machining center. Contact us for more information about this machine. Application Types Rcjdpfx Ahsx Ixh Nj Uek Milling

Year of construction: 2003, condition: excellent (used), Control: Fanuc/Matsuura i30 G-Tech X 500 mm Y 500 mm Z 500 mm Spindle revolutions 15000 rpm 240 ATC Pallets 300 x 300 mm Nos. pallets 5 SK40 IKZ 25-50 bar Measuring probe Tool breakage monitoring KSS cooling New spindle in 7/2022. Spindle hours 4800 h April 2021 - tool spindle spindle motor renewed May 2021 - changer arm of ATC repaired July 2022 - tool spindle + motor renewed November 2022 - ATC drive repaired. The ATC, automatic tool changer, has been completely retrofitted. The housing is the original, the wear parts like e.g. bearing, lever, cam discs etc. have been renewed. Machine is in very good working condition and partly retrofitted. It can be inspected working under power. Technical indications, subject to error. Rodpfxepwbfkj Ah Usck

Condition: used, Year of construction: 2004, Leadwell Vertical Machining Centre Model V-30. S/No. L2TJD0216 (2004) with Fanuc Series Oi-MB Control, 24 Station ATC, Table Size 890mm x 400mm, X Travel 760mm, Y Travel 410mm, Z Travel 410mm, BT 40 Tooling Rjdex Ahxkopfx Ah Ujck Location: This lot is located in Birmingham, UK. A charge of £250 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Year of construction: 2003, condition: good (used), Traverses X Y Z: 810 x 610 x 500mm, Table 350mm diameter, C axis (rotary) 360o, A axis (Tilt) +30o/-120o, Spindle speed 12000 rpm, Spindle taper BT40, Spindle Motor 13kW, Rapid feedrates 43m/minute, Heidenhain TNC530, Rcjdpfsk Shihox Ah Uok 30 Station side arm ATC, Coolant, Low Volt light

Condition: ready for operation (used), Year of construction: 2014, Control Unit Brand HAAS Main Drive Number of axis 5 Spindle Speed 12000 RPM This 5-axis HAAS UMC-750 was manufactured in 2014. It features a 12000 rpm spindle, a 40+1 tool changer, through-spindle coolant at 21 bar, and a conveyor. High-speed machining capabilities are enhanced with programmable coolant and Dynamic Work Offsets/Tool Center Point Control. It also includes Renishaw probes and a robot interface. If you are looking to get high-quality milling capabilities consider the HAAS UMC-750 machine we have for sale. Contact us for more information about this machine. Redpfxjx Imtts Ah Ujck Application Types Milling

Condition: ready for operation (used), Year of construction: 2015, operating hours: 16,661 h, Control Unit Brand SIEMENS Model 840 D Main Drive Number of axis 5 This 5-axis DMG MORI Beta 800 TC was manufactured in 2015. It features a Siemens sl Operate 3G control, a counter spindle with a C axis, and dual chucks on both main and counter spindles. Equipped with a 48-tool HSK 63A chain magazine and a coolant system capable of 8/20 bar, it's ideal for complex turn-mill operations. Consider the opportunity to buy this DMG MORI Beta 800 TC turn-mill centre. Contact us for more information about this machine. Rcedpsx H U Ezefx Ah Ujk Application Types Turning

Condition: ready for operation (used), Year of construction: 2009, Control Unit Brand HEIDENHAIN Redpfxjx D Rggj Ah Ueck Model iTNC 530 This 5-axis Matec 30-HV was manufactured in 2009, featuring a versatile universal machining center with a large X-axis travel of 3000 mm and a Y-axis of 600 mm. It includes a high-speed range up to 12,000 rpm, a tool magazine for 36 tools, and a high-pressure cooling system (70 bar). Ideal for complex 3D machining with its powered CNC rotary table and Heidenhain iTNC 530 control. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2017, General Data Measurements width 2440 mm Measurements depth 2180 mm Measurements height 2900 mm Machine weight 5540 kg Control Unit Brand HURCO Model MAX5 Rcsdpfxjx D Ekyo Ah Uok Main Drive Spindle speed range 12000 RPM Number of axis 5 Movement X-Axis Movement 760 mm X-Axis Rapid Traverse 35 m/min Y-Axis Movement 510 mm Y-Axis Rapid Traverse 35 m/min Z-Axis Movement 520 mm Z-Axis Rapid Traverse 30 m/min A-Axis Movement +30°/-110°, +/- 7 sec A-Axis Rapid Traverse 25 RPM C-Axis Movement 360°, +/- 7 sec C-Axis Rapid Traverse 25 RPM Workpiece Workpiece weight 140 kg Table Number of tslots 6 Table load 200 kg Tools Number of index 40 Max weight 7 kg Max tool length 300 mm Media Main electronic connection 31 kVA / 45 A / 400V Additional Equipment Central lubrication system: 1 pump (X,Y,Z) Taper DIN69871 SK-40 Material of machine bed: Cast-iron This 5-axis Hurco VMX30Ui + BMO Automation Titanium 50 was manufactured in 2017. Ideal for complex, multi-angle machining with its advanced vertical machining centre design. If you are looking to get high-quality milling capabilities, consider the Hurco VMX30Ui machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2005, Control Unit Brand MAZATROL Model 640M General Data Measurements width 3485 mm Measurements depth 4424 mm Measurements height 3442 mm Machine weight 11500 kg Main Drive Spindle speed range 40 - 12000 Number of axis 3 Movement X-Axis Movement 1740 mm Y-Axis Movement 760 mm Z-Axis Movement 660 mm Table Outer length 2000 mm Outer width 760 mm Table load 1400 kg Redpfxox D Ifyj Ah Ujck This 3-axis Mazak VTC-300C vertical machining center was manufactured in 2005. It features a spindle speed range of 40 - 12,000 RPM and a robust table capable of handling loads up to 1400 KG. With dimensions allowing for significant movement (X: 1740 mm, Y: 760 mm, Z: 660 mm) and equipped with a 30-piece ATC, this machine is ideal for complex machining tasks. If you are looking to get high-quality milling capabilities, consider the Mazak VTC-300C machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 1994, Control Unit Brand FANUC Model Series 16-M Redpox D Nq Rjfx Ah Usck Movement X-Axis Movement 400 Y-Axis Movement 300 Z-Axis Movement 300 This 3-axis FANUC Robodrill Alpha-T10A was manufactured in 1994. It features a FANUC Series 16-M CNC, a table size of 650x400 mm, and can handle a maximum part weight of 200 kg. It has 10 tool pockets, enhancing its versatility for various machining tasks. Consider the opportunity to buy this FANUC Robodrill Alpha-T10A vertical machining centre. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2007, Control Unit Brand OKUMA Model OSP-P200M Rcjdpfx Ahjx D Nf Ue Uok Main Drive Spindle speed range 15000 rpm Movement X-Axis Movement 560 Y-Axis Movement 610 Z-Axis Movement 625 This 4-axis Okuma MA-400HA horizontal machining center was manufactured in 2007. It features a 560mm X-axis, 610mm Y-axis, 625mm Z-axis, and a table size of 400x400mm. The machine includes a 15,000 rpm spindle, 100-tool matrix magazine, and OSP-P200M control. It also boasts a 6 APC/pallet pool and a Mayfran Consep 2000 chip conveyor. Consider the opportunity to buy this Okuma MA-400HA horizontal machining center. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2006, Control Unit Brand HEIDENHAIN Model iTNC 530 Main Drive Spindle speed range 18000 rpm Tool taper SK 40 Additional Equipment Tool Magazine: Additional magazine ZM157 Tool Breakage/Measurement: BLUM tool breakage/measurement Measuring Probe: Heidenhain Event Messenger: Available Electrical Heat Compensation: Provided External Blowing Air: Provided / Oil Mist Extraction: Provided / Chip Trolley: 450 liters Rotating Transparent Window: Available Additional Accessories: Manual control module, flange for extraction 1, bed flushing, sealing air for scales, machine license TCS-Soflex This 5-axis HERMLE C30U + RS Automation was manufactured in 2006, offering advanced capabilities for precision machining. Ideal for complex geometries, this vertical machining centre represents a significant asset for enhancing your production efficiency. Consider the opportunity to buy this HERMLE C30U vertical machining centre. Contact us for more information. Redpsx D Ew Hofx Ah Usck Application Types Milling

Condition: ready for operation (used), Year of construction: 2004, General Data Measurements width 3200 mm Measurements height 2700 mm Measurements depth 2500 mm Movement X-Axis Movement 700 mm Z-Axis Movement 450 mm Y-Axis Movement 550 mm Additional Equipment Oil Mist Extraction / Milling Spindle HSK 40 Fischer / Laser System / Infrared Measuring Probe / SW 3D Form Inspect / Handling System 84 × ITS 50 / 16 × ITS 148 / WINSTAT Connect Main Drive Number of axis 3 Spindle Speed 42000 RPM Spindle motor power 17 kW Tool taper HSK 40 Rodpfx Ajx D H Ugoh Ueck Table Table load 2000 kg Tools Slots in storage 72 This 5-axis OPS INGERSOLL 650 was manufactured in 2004, featuring a robust vertical machining center design. It boasts a travel distance of X: 700 mm, Y: 550 mm, Z: 450 mm, and a high spindle speed up to 42,000 rpm. The machine includes a 72-tool changer and supports a load capacity of 2000 kg. If you are looking to get high-quality milling capabilities consider the OPS INGERSOLL 650 machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2000, General Data Machine weight 3500 kg Movement X-Axis Movement 8000 mm Y-Axis Movement 500 mm Z-Axis Movement 220 mm This 3-axis Tekna TK 427/8 CNC milling machine was manufactured in 2000. It features a substantial travel range with 8000 mm on the X-axis, 500 mm on the Y-axis, and 220 mm on the Z-axis, weighing 3500KG. If you are looking to get high-quality milling capabilities, consider the Tekna TK 427/8 machine we have for sale. Contact us for more information about this machine. Rcodpfjx D E S Rsx Ah Uok Application Types Milling

Condition: ready for operation (used), Year of construction: 2016, operating hours: 18,759 h, Control Unit Rodpfxox D Rdxs Ah Uock Brand HEIDENHAIN Model TNC 640 Main Drive Spindle speed range 15000 Tool taper HSK-63 Number of axis 5 Movement X-Axis Movement 3000 mm Y-Axis Movement 800 mm Z-Axis Movement 1100 mm This 5-axis Matec 30 HV universal machining center was manufactured in 2016. It features a 60-position tool magazine, 15,000 rpm spindle, and Heidenhain TNC 640 control. Additional highlights include a rotary table, spindle cooler, and an extensive cooling system with a 510-liter tank. If you are looking to get high-quality milling capabilities, consider the Matec 30 HV machine we have for sale. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2003, Movement X-Axis Movement 800 mm Y-Axis Movement 550 mm Z-Axis Movement 550 mm Rodjx D I D Nopfx Ah Ueck This 3-axis Matsuura V.PLUS-800 was manufactured in 2003. It features a spacious table of 1150mm x 550mm with a loading capacity of 500kg, and a robust spindle speed ranging from 40 to 12,000 RPM. Ideal for precise and heavy-duty machining. If you are looking to get high-quality milling capabilities, consider the Matsuura V.PLUS-800 machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2002, operating hours: 55,730 h, General Data Machine weight 24500 kg Control Unit Brand SIEMENS Model Sinumerik Main Drive Spindle speed range 12000 Spindle motor power 35 kW Number of axis 3 Movement X-Axis Rapid Traverse 100 m/min Y-Axis Rapid Traverse 60 m/min Z-Axis Rapid Traverse 60 m/min Rjdpfx Ahox Nr Tuj Ueck Table Table load 3100 kg Turret Number of tool slots 9 Tools Max weight 6 kg (SK40/HSK63) or 12 kg (SK50/HSK100) Type of tool holder HSK-63 Additional Equipment Safety Equipment: Monitored and locked work area door; Key switch for normal and set-up mode; Limited functions when the door is open This 3-axis DECKEL MAHO DMF 250 linear was manufactured in 2002. It features a robust vertical machining center with a high-speed main drive up to 40 kW and rapid traverse rates of 100 m/min on the X-axis and 60 m/min on Y- and Z-axes. The work table measures 3,100 × 900 mm with a load capacity of 3,100 kg. If you are looking to get high-quality milling capabilities consider the DECKEL MAHO DMF 250 linear machine we have for sale. Contact us for more information. Application Types Milling