Used Foam Machine for sale (64,875)

Condition: good (used), Year of construction: 2015, We offer you: Foam cushion packaging machine Manufacturer: Sealed Air Model: Instapak 901 Year of manufacture: 2015 Accessories, depicted tools, and clamping devices are only included in the scope of delivery if specified in the additional information. Laodpfxjw Ra Iho Amnoa Subject to changes and errors in technical data and details, as well as prior sale!

Year of construction: 2022, condition: used, Manufacturer : Buhler Haas-Mondomix B.V. Model: HAKA type VA-15L Year : 2022 Type : Foam / Aerator mixer Lodpfx Asx R A Rtemneaa Previous application : Application : Whipped cream Production capacity : 100 kg/hr nominal Input density : 1,0 kg/l Output density: 0.6 – 0.8 kg/l   Near as new condition. Unit consisting of : – Pre-mixer PCM 400 litres Capacity: 400 litres Design: conical bottom Lid with hinged access for manual loading of ingredients Jacketed, insulated and protected tank Stirrer: cutting blade + Teflon scrapers PT100 temperature sensor – HALA type dispensing pump with frequency converter Volumetric pump with frequency converter Jacketed design Mass flow meter with regulator – HAKA VA-15L type continuous aerator Rotor / stator with 912×5 mm square lugs Effective volume 2 ltrs Mixing head stator Double-walled front and rear plate for cooling Rotor designed for cooling Temperature sensors Jacketed piping 7.5 kW direct drive motor, frequency converter controlled Air injection: manual or automatic with mass flow meter Automatic pressure control and regulation Cabinet + PLC, Siemens S7 type – HANB cold water production unit Autonomous chilled water unit (thermoregulation) for cooling the expansion head tank Water temperature between 5°C-20°C Spiral heat exchanger / Centrifugal pump / Closed water tank – CIP Easy Clean system for easy cleaning Stainless steel platform supporting all equipment

Year of construction: 2017, condition: ready for operation (used), A foam bag system for packaging smaller and individually manufactured parts is available. Packaging capacity: 16 bags/min, film type: perforated, bag dimensions 1 X/Y: 470mm/400mm, bag dimensions 2 X/Y: 470mm/600mm. Machine dimensions X/Y/Z: approx. 500mm/500mm/700mm, weight: approx. 30kg, control: Instapak 901. Includes two component filler, spare parts, and foil bags. Documentation vorhanden. An on-site inspection is possible. Lodjx A Hg Hjpfx Amneaa

Condition: excellent (used), Year of construction: 2014, Type: CNC horizontal contour cutting machine Manufacturer: Fecken Kirfel Designation C56 Lodpfor Ilb Sex Amnoaa Year of construction: 2014 Dimensions: Cutting width 1300 mm Cutting length 1300 mm Cutting height 1300 mm Blade rotation of +/- 360 degrees Max. Cutting speed 25 m/min Info: Very well-maintained CNC contour cutting machine with revolving bandknife and automatic grinding device. High precision in the smallest of spaces. Very small footprint The machine is network-compatible and can be integrated into the Windows network. The machine is still in daily use and can be inspected by appointment. Further information on request Available immediately Disassembly and transportation must be done by the buyer. Please also note our other sales ads

Condition: excellent (used), Type: Vertical cutting machine Manufacturer: Albrecht Bäumer Designation IS/M Year of manufacture: 1993 (2017-retrofit mechanical and electrical) Dimensions: Table to the left of the meter 2200 mm Table to the right of the measurer 2200 mm Ledper Iirnjfx Amneaa Cutting length 2580 mm Cutting height 1500 mm Side stop right 1200 mm Side stop left 1200 mm foldable motorized grinding unit height-adjustable blade guide Info: ISM vertical cutting machine from Bäumer in top condition The machine was completely overhauled by the manufacturer in 2017 (Retrofit Step 1-4) Machine is still in use and can be inspected by appointment. Further information on request Available immediately Disassembly and transportation must be done by the buyer. Please also note our other sales ads

Condition: like new (used), Year of construction: 2018, Type: Vertical cutting machine for foam and similar materials Manufacturer: Albrecht Bäumer Designation IS/M-3 Year of construction: 2018 Dimensions: Table left of the measuring sensor 2500 mm Table to the right of the measurer 2200 mm Cutting length 2500 mm Cutting height 1300 mm Side stop right 1200 mm Side stop left 1200 mm foldable motorized grinding unit height-adjustable blade guide Pneumatic blade clamping Ljdpfx Amsr H D Tujnoaa Info: Little used vertical cutting machine ISM-3 from Bäumer. Simple operation and very reliable machine with state-of-the-art technology The machine is equipped with B-Con (used for remote maintenance by the manufacturer via the Internet) The machine is still in use and can be inspected by appointment. Available immediately Disassembly and transport to be organized by the buyer. Location NRW district of Lippe Further information on request (please only in writing)

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 010199, input voltage: 220 V, height adjustment type: electric, total length: 4,820 mm, overall weight: 5,000 kg, total width: 3,760 mm, total height: 2,395 mm, control cabinet height: 1,627 mm, control cabinet length: 550 mm, control cabinet width: 550 mm, electrical fuse: 10 A, input frequency: 50 Hz, For sale: CNC Foam Cutting Machine - RAM SLC 499 SUPERFAST. Year of manufacture: 2006. Regularly serviced and fully operational. The machine is in continuous use – testing on site is possible. Cutting dimensions: Lsdpfxoyaxrke Amnsaa a-2200 c-2200 h-1300 Transport to your specified address can be arranged. For more information, please contact by phone only: 508388091

Condition: new, Year of construction: 2025, machine/vehicle number: sn. 816, functionality: fully functional, total height: 3,500 mm, total length: 3,600 mm, total width: 4,000 mm, cutting height (max.): 1,300 mm, feed length X-axis: 2,600 mm, feed length Y-axis: 1,300 mm, space requirement height: 3,600 mm, space requirement length: 4,200 mm, space requirement width: 4,500 mm, warranty duration: 12 months, Polish manufacturer of machines and equipment for cutting and processing polyurethane foam with over 25 years of experience offers for sale a brand-new automatic horizontal cutting machine, Model: TYPE PARK. The machine features a stable and robust steel construction. Cutting is performed by the movement of the cutting frame along the X and Y axes, while the table remains stationary. The cutting frame is driven by two reinforced toothed belts and moves on linear bearings along the X-axis. In the Y-axis (up and down movement of the frame), the feed is powered by two ball screws and linear bearings. The machine supports both single-sided and double-sided cutting modes and includes an automatic cutting correction system for double-sided cutting. Machine equipment includes: Automatic, self-adjusting saw blade tensioning system Stationary table with powered conveyor belt for easy material loading Automatic cutting length measurement Quick-change system for the saw blade Automatic material clamping system Working parameters: Cutting width: 2100 mm Cutting length: 2500 mm The machine is fully enclosed with safety fencing and equipped with safety light curtains at the loading and unloading zones. Laodewq Dvdjpfx Amnja As the manufacturer, we provide installation and servicing within the EU. The machine is CE certified. We also offer a wide range of machines and devices for cutting foam and mineral wool. We invite you to explore our full range of products.

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: 3542, conveyor belt length: 2,200 mm, conveyor belt width: 2,200 mm, conveyor belt speed: 116 mm/s, total length: 4,000 mm, total width: 4,000 mm, total height: 4,500 mm, overall weight: 4,000 kg, discharge height: 3,500 mm, power: 7.2 kW (9.79 HP), type of input current: three-phase, input voltage: 380 V, input frequency: 50 Hz, pivoting range: 90 °, Equipment: documentation/manual, We offer the following used D.B. S.R.L. PCLO 2200 contour foam cutting machine, manufactured in 2007. Manufacturer: D.B. S.R.L. Lajdpsx T Ax Nefx Amnea Model: PCLO 2200 Year of manufacture: 2007 Condition: used Category ID: 34 Type ID: 3028 Type: Contour Foam Cutting Machine If you have any questions or need more information, please send us a message or call us.

Year of construction: 2025, condition: new, Equipment: CE marking, Our company has been building foam cutting machines for over 15 years. The experience gained over the years of working on foam processing machines has allowed us to build the 4th generation of vertical machines RV 2500/2100 as well as the 3rd generation of horizontal contour lines SK3500. Our machines work on the Polish and European markets. The machines are designed and built in our company, the software is also our own. The materials used to build the machine are widely available on Polish and European markets. Our service works 7 days a week, providing a sense of security to our customers. Vertical machine left table 2100mm x 2600mm Ledpfx Amjiqt N Isnoaa right table 2100mm x2600mm cutting height 1340mm Horizontal liner SK3500 rotary table 2200mm x2200mm cutting height 1250mm

Condition: excellent (used), Year of construction: 2005, Basic data: Production year: 2005 Dimensions (LxWxH): 7580x4360x5120 mm Weight: 6000kg Operating voltage: 400/415V 50Hz Lasdpfjrfn Rvsx Amnsa Power consumption: 20kW Capacity at 20g/l: 1600kg/h Touch screen control panel Powder tank with screw feeder Complete documentation in both paper and electronic form (electrical schematics, CE compliance certificate, user manual) Condition: very good (machine clean and well-maintained, used exclusively for foaming white polystyrene) For an additional fee, our company can arrange transportation, as well as the installation and commissioning of the machine by our technicians at the location specified by the customer.

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: MzBs001, Equipment: CE marking, Foam sealing machine, automatic upper and lower cover sealing machine, adopts PLC control,adjusts the tape to the sealing position through the adjustable handle,touches the screen to select the corresponding model and presses the start button to automatically seal the tape. The sealing effect is flat and beautiful, and the sealing is firm. It can be operated by a single machine or matched with an automatic packaging line. Widely used in food, fresh food, cold chain, e-commerce and other industries. Lajdpfjxu Agmsx Amnsa

Year of construction: 2017, condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 5,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,250 mm, spindle speed (max.): 6,000 rpm, table load: 15,000 kg, Fully operational condition + regularly serviced by the machine manufacturer The machine was built in 1998. In 2017, the control system was completely renewed for approximately €40,000! TECHNICAL DETAILS X-axis: approx. 5,000 mm Y-axis: approx. 2,500 mm Z-axis: approx. 1,250 mm Control unit: Fidia CXR with handwheel – new from 2017 Clamping table dimensions: approx. 5,600 x 2,740 x 520 mm (cast iron) Table load capacity: max. 15,000 kg T-slots and spacing: 10 x 22H8 / 255 mm Spindle Spindle type: hollow milling spindle with 78/8 flange and locknut Milling spindle power: 8 kW Spindle speed: 6,000 rpm Tool holder: ER40 collet chuck Tool release: manual Laodpfxew N Nnbs Amnsa Note: For approx. €10,000, a spindle upgrade kit can be retrofitted (cables & adapter plate included): Spindle speed: 24,000 rpm Tool holder: HSK63F Power: 10 kW Torque: 8.7 (S1) and 10.5 (S6) A new 6-position tool changer can also be purchased in combination with the spindle upgrade (approx. €4,000). MACHINE DETAILS Connected load: approx. 28 kW Main fuse: 63 A Installation space required: approx. 8,000 x 5,000 x 4,500 mm Total weight: 25,000 kg

Condition: used, Year of construction: 1989, MAKE GER, MADE IN SPAIN MODEL RS 10/60 YEAR TABLE LENGTH 1300.0 mm TABLE WIDTH 600.0 mm TRAVEL X AXIS: 1600.0 mm Y AXIS: 600.0 mm Laodoy Du N Ujpfx Amnsa MAX DISTANCE (TABLE TO WHEEL) 800.0 mm MAX WORKPIECIE WEIGHT 1000 KGS GRINDING WHEEL SIZE 400.0 x 100.0 x 127.0 mm SPINDLE SPEED MAX 1500 RPM MACHINE DIMENSIONS 4600.0 x 2700 x 2600.0 mm MACHINE WEIGHT 7600 KGS PLUS ELECTROMAGNETIC CHUCK SIZE: 1000.0 X 600.0MM HYDRAULIC PACK COOLANT SYSTEM WHEEL MOUNTED DRESSER

Condition: reconditioned (used), Kalmijer Cookie machine if you have further questions please send an message Ledpfjkzi Ulex Amnsaa

Condition: ready for operation (used), Hereby we offer a unique Italian ice cream machine from lady B trittico. Works on 220v normal plug connection and on water ideal to take with you on a trip or camping! The Bravo Lady B is a compact pasteurization and cooling machine, specially developed for smaller companies such as restaurants, bakeries or ice cream parlors. It combines two essential processes: 1. Pasteurization in the upper vertical vessel, with an adjustable temperature of +65°C or +85°C, depending on the desired pasteurization process. 2. Cooling in the lower horizontal cylinder, in which the mixture is quickly cooled to the desired temperature. A special feature is the patented system with which the hot mixture is transferred internally - without contact with the outside air - from the pasteurization vessel to the cooling cylinder. This guarantees maximum hygiene and enables efficient production. • Maximum filling quantity: up to 2 liters • Power supply: 230 volts, 3.2 kW • Connection system: ready to plug in • Cooling system: water cooling can be connected to a normal tap • Weight: 95 kg • Dimensions: 63 x 36 x 59 cm Maintenance and parts are still available from lobbia refrigeration technology Carpigiani Telme Taylor Kalte rudi Bravo trittico ice cream machines pasteurization pasteurization Laodpfxowgw Tbo Amnea

Condition: not inspected (used), functionality: unexamined, overall weight: 700 kg, total length: 2,200 mm, total width: 1,000 mm, total height: 1,600 mm, No reserve price – guaranteed sale to the highest bidder! Submitting a bid obligates timely collection between 23/06/2026 and 26/06/2026! Laodpfjy D S Unex Amnoa MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,200 x 1,000 x 1,600 mm Weight: 700 kg EQUIPMENT RNA Vibratory Feeder (diameter: approx. 800 mm) External reference: 33

Condition: not inspected (used), functionality: unexamined, overall weight: 700 kg, total length: 2,200 mm, total width: 1,000 mm, total height: 1,600 mm, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection between 23/06/2026 and 26/06/2026! MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,200 x 1,000 x 1,600 mm Weight: 700 kg EQUIPMENT RNA vibratory feeder (diameter: 800 mm) External reference: 34 Laedpfx Amey D S S Hsnja

Condition: ready for operation (used), functionality: fully functional, Very nice Wire-o punching machine. Electric with foot pedal, max format 710 mm. Punches up to 20 sheets of 80 gsm with square holes. Lsdpfoymn Hwsx Amnjaa You are of course welcome to test this machine with us. We can arrange transport/packaging for you and load it onto a truck or into a container. Please request a price including transport (location: Netherlands). Kind regards, Henk Hoos.

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: LCS300-4T, CNC machine Elcede, type LCS300-4T, year of manufacture 12/2001, 400/50 Hz, working area 305 x 152.5 cm, machine dimensions 545 x 280 x 233 cm (height), control cabinet 80 x 64.5 x 190 cm (height), PC cabinet 84 x 75 x 198 cm (height), 3x Dietz fans, + cooling unit KKT-krans KLB-S26T-RS, year of manufacture 2001, 400V, 144 x 90.5 x 161 cm (height), 50,640 operating hours, desk with Fukitsu desktop, password Defi123+, desk 170 x 75 x 78 cm (height), in operation. Lsdpfxoy D Hwwe Amnoaa

Condition: ready for operation (used), Year of construction: 2019, operating hours: 3,028 h, functionality: fully functional, machine/vehicle number: type 2016-CV6+3P-1T, workpiece weight (max.): 1,500 kg, CNC machine Milla Plus, Pretek Unico type 2016-CV6+3P-1T, year of manufacture 2019, 400V, 1500 kg, working area 205 x 165 cm, 9 tool changer positions, 3028.2 read operating hours, machine dimensions 324 x 302 x 187 cm (height), PC stand 55.5 x 140 x 172 cm (height), CNC suitability: metal-glass-PVC. 2x vacuum pumps Becker type VTFL2.200/0-79, max 200/200 mbar, mounted in frame 140 x 77 x 174 cm (height). Dena mobile extraction type APL30-500, year of manufacture 2018, motor Esam mdeio jet AAO. Rack 106 x 32.5 x 125 cm (height) with accessories, in operation. Video available. Laodpfxjy D Hrue Amnea

Condition: like new (used), Thom Type SI Spout Inser­ter Machi­nes for inser­ting the spouts into pre­fa­bri­ca­ted pou­ches. Model - Thom SI‐900 Semi­au­to­ma­tic machi­ne Ide­al for sam­ple pro­duc­tion and small series pro­duc­tion Capa­ci­ty: Up to 10 pou­ches / min. Lsdpfsx Utd Ejx Amneaa Thom fil­ling and packa­ging machi­nes are in demand ever­y­whe­re whe­re fle­xi­ble packa­ges need to be fil­led (pou­ches / refills): in the food indus­try, the cos­me­tics and deter­gents indus­try or in the beverage fil­ling.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, travel distance X-axis: 785 mm, travel distance Y-axis: 470 mm, travel distance Z-axis: 530 mm, table width: 500 mm, table length: 900 mm, spindle speed (max.): 8,000 rpm, XYZ LPM Vertical Machining Centre Model: LPM Year: 2016 ‘X’ axis Travel: 785mm ‘Y’ axis Travel: 470mm ‘Z’ axis Travel: 530mm Table Size: 900 x 500mm Lsdpeyg N Aaefx Amnsaa Spindle Taper: BT 40 Spindle Speeds: 8000 RPM Automatic Toolchanger: 16 station

Year of construction: 1995, condition: ready for operation (used), working width: 1,550 mm, inner diameter: 152 mm, rotational speed (distance/time): 13,000 mm/min, The machine cuts from roll to DIN A4 or A3 size sheets, stacking 100 sheets per box, as required in the office supplies market. The machine's output at 7-up across the 210 mm width is: in 1 hour: 250 A4 boxes filled with 100 sheets each. Lodpfx Ajy Ed Hfsmnoaa Possible materials: photo papers, inkjet films, OHP transparencies, self-printable business card cartons, PVC sheets for bookbinders as covers for brochures, matt-coated laser films for labeling, felts, and much more! The machine is still in daily operation, and can therefore be inspected and tested. We would handle dismantling, packing, and loading onto truck or into sea container at our cost... EXW.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: SOP10107, travel distance X-axis: 355 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 455 mm, table width: 381 mm, table length: 457 mm, spindle speed (min.): 10,000 rpm, number of slots in tool magazine: 8, XYZ Machine Tools XYZ 2-OP (2020 Model) Upgrade your workshop with this reliable and high-performance CNC machine from XYZ Machine Tools Ltd, a trusted name in precision engineering. Machine Specifications: Feature Spec / Capability Travel (X × Y × Z) ~ 355 mm × 305 mm × 455 mm Table size ~ 457 mm × 381 mm Max work load ~ 250 kg Spindle BT30 taper, 10,000 rpm, ~ 3 hp (≈ 2.2–2.3 kW) motor Tool changer 8-station automatic tool changer Rapid traverse ~ 15 m/min (X/Y/Z) Control ProtoTRAK TMX conversational CNC (menu-driven, with G-code compatibility), USB file transfer Accuracy / repeatability Positioning accuracy typically around ±0.005 mm (varies with condition), repeatability ±0.003 mm Footprint ~ 760 × 1,220 mm, ~ 2.5 m tall Machine weight ~ 1,100 kg • Year of Manufacture: 2020 • Rated Voltage: 400V • Full Load Current: 15A • Short Circuit Rating: 10kA • Phase: 3 • Cycle: 50Hz • Main Motor Power: 2.2 kW • Max Spindle Speed: 10,000 RPM • Pneumatics: 6 bar / 100 L/min • CE Certified _____ Lasdpfx Amoxd Dgysnsa Practical machining use • High-speed drilling, tapping, and small-tool milling: The 10k rpm spindle makes it much better for smaller cutters (Ø3–10 mm) and aluminium machining compared to the older 6k rpm version. • Secondary ops & light milling: Great for “clean-up” cuts, bolt holes, chamfers, flat milling, and side ops after turning. • Batch work with multiple ops: The 8-station tool changer is limiting, but with smart tooling (spot, drill, tap, end mill, chamfer, face) you can cover a lot. • Compact footprint: It can be placed near lathes or VMCs to absorb “2-op” bottlenecks. Condition: • Excellent working order • Lightly used, well-maintained. Has only been used to make Aluminium and Nylon shop fittings. • Ready to go straight into production Why Choose the XYZ 2-OP? • Precision engineering and durability • High spindle speed and robust motor for versatile machining • Compact and efficient design • Backed by XYZ’s reputation for service and reliability Don’t miss this opportunity to own a top-quality XYZ 2-OP machine—perfect for workshops, tool rooms, and production facilities looking to boost their machining capabilities.