Used Four Side Planer for sale (22,873)

Condition: excellent (used), Guilliet KXR four-sided planer Working width 220mm Working height 120mm Number of spindles 6 Lodpjn Tph Eefx Ahzjrg Arrangement of spindles Bottom 5.5kw Right Left 7.5kw Top 5.5kw Bottom 5.5kw Universal 5.5kw Feed rate adjustable on variator 6-27m/min Feed motor 2.2kw Feed on cardan shafts Pneumatic stops Worktop lubrication

Condition: excellent (used), Leadermac LMC 423 S, four-sided planer - max planing width: 23cm - max planing height: 13cm - electric raising for feed beam with rollers - feed roller in table + pump with sliding fluid - chrome-hardened tables - complete set of spiral cutterheads - all spindles adjustable vertically and horizontally Ledpfx Ahsxixu Nozerg - bottom spindle 5.5 kW, right and left spindles via one 7.5 kW motor, top spindle 7.5 kW - all motors with brake - stepless feed speed adjustment Weight: 2,200 kg, machine length: 3.3 m. Machine in very good condition, ready for operation.

Condition: reconditioned (used), Year of construction: 1985, functionality: fully functional, For sale is a used four-sided planer/moulder from Weinig with 7 spindles and powered infeed roller conveyor. The machine has been in operation since at least 1985 and was overhauled in the workshop in 2007. It is in working condition but is no longer in use. The exact year of manufacture is unknown; based on its design and equipment, it is likely a Weinig Unimat 17 series machine from the 1980s. Technical data (approximate values): - 7 spindles Lrsdpfx Aow Rkqgjhzeg - Spindle diameter: 40 mm - Working width: approx. 20 – 170 mm - Working height: approx. 8 – 120 mm - Tool diameter: up to approx. 160 mm - Feed speed: 6 – 24 m/min - Voltage: 380 V / 50 Hz - Weight: approx. 4,500 kg - Including powered infeed roller conveyor - Including various cutters (see photo) Note: This is a used, older model machine, being sold without warranty. Inspection by appointment possible.

Condition: excellent (used), Winter POWERMAX 5-26 5/24 four-sided planer Technical data: Ljdpfouufx Eex Ahzsrg Max planing width: 260 mm Max planing height: 130 mm Diameter of the spindles: 40 mm Number of spindles: 5 Order of spindles: Down: 5.5 kW right: 5.5 kW left: 5.5 kW top: 7.5 kW bottom: 5.5 kW Each spindle on a separate motor Toothed roller in the countertop in front of the first head Number of top steel pulling rollers: 6 Number of top rubber pulling rollers: 2 Extraction spigot diameter: 150 mm Infinitely adjustable feed Feed on gimbals Feed motor 3.5 kW Pump for lubrication of the working table Pump for central lubrication of the machine 1 smooth roller in the table top Pressure: 6 atm. Electric lifting of the body Electric adjustment of workpiece dimensions Power supply: 400 V Total power: 33 kW Overall dimensions: Length: 4500 mm Width: 2000 mm Height: 1860 mm

Condition: ready for operation (used), Maximum planing width: 230 mm Maximum planing height: 120 mm Spindle diameter: 40 mm 4 heads plus one universal head Lrjdpfswh Szvex Ahzsg Head configuration: Bottom, right, left, top, universal Motor power: 4 kW (bottom), 5.5 kW (right), 4 kW (left), 4 kW (universal) Spindle rotation speed: 6000 RPM Table lubrication Electric height adjustment (up/down) Two feed speeds Year of manufacture: 1999 Weight: 2320 kg Voltage: 400 V

Condition: excellent (used), functionality: fully functional, working width 230mm working height 120mm 4 heads heads adjustable in two axes diameter of spindles 40mm Lsdpfx Ahsw Afm Iozjrg control of planing dimensions from the panel star/delta start of spindles two feed gears table top lubrication system year of production 1998

Condition: ready for operation (used), working width 260mm working height 150mm toothed roller in the feed table before the first head 5 heads Lsdow Afl Repfx Ahzorg head arrangement: lower/right/left/top/bottom electric setting of planing dimensions stepless feed adjustable up to 24m/min pneumatic clamps of the pulling rollers head adjustment in two axes engines: 1. 11kW 2. 11kW 3. 12kW 4. 11kW 5. 7.5kW pulling roller drive via cardan shafts feeding table length 2m chrome plated table additional pulling roller at the right head, so-called tandem horizontal pneumatic clamps set of heads included with the machine

Condition: ready for operation (used), max working width 500mm max working height 200mm height of side heads 10cm changenable side heads Ljdew Afkyspfx Ahzjrg 2-knives shafts roll in the table manual adjustment of side heads two feed speed additional spindles in the outfeed

Condition: excellent (used), Technical data: Max planing width: 210 mm Max planing height: 130 mm Lsdjwv Sxkopfx Ahzsrg Spindle diameter: 40 mm Number of spindles: 4 Spindle arrangement: bottom right left top Each spindle powered by a separate motor Toothed feed roller in the table before the first head Number of upper steel feed rollers: 6 Number of upper rubber feed rollers: 1 Extraction port diameter: 4x130 mm Continuously variable feed speed Feed drive via cardan shafts Lubrication pump for worktable 1 smooth roller in the table Pressure: 6 atm Electric elevation of machine body Power supply: 400 V Total power: 23 kW Overall dimensions: Length: 3580 mm Width: 1700 mm Height: 1800 mm

Condition: used, Technical data: Max planing width: 230 mm Max planing height: 120 mm Spindle diameter: 40 mm Number of spindles: 5 Spindle sequence: down 5.5 kW right + left 11 kW up 7.5 kW universal 5.5 kW Each spindle on a separate motor Number of upper steel pulling rollers: 5 Lredpfjmiik Tex Ahzsg Number of upper rubber pulling rollers: 3 1 rubber roller in the table top Extraction port diameter: 150 mm Smooth feed adjustment: 4-24 m/min Cardan feed Table lubrication pump Pressure: 6 atm. Electric lifting of the body Power: 400V Overall dimensions: Length: 4240mm Width: 1550mm Height: 1560mm

Condition: used, Technical data: Max planing width: 230 mm Max planing height: 140 mm Diameter of the spindles: 40 mm Number of spindles: 4 Order of spindles: Lrjdpfxoqv Awij Ahzjg bottom 5.5 kW right + left 11 kW top 7.5 kW feed 3 kW Manual adjustment of all heads Number of top steel pulling rollers: 4 Number of top rubber pulling rollers: 1 1 rubber roller in the top Extraction spigot diameter: 130/150 mm Infinitely adjustable feed rate: 4-26 m./min Feed on gimbals Working table lubrication pump Pressure: 6 atm. Electric lifting of the body Power supply: 400 V Overall dimensions: Length: 4180 mm Width: 1720 mm Height: 1740 mm

Condition: repair required (used), Four-sided planer SCM P64 profiler Specification: • condition - for inspection, requires maintenance and minor repairs • manufacturer - SCM • model - P64 • working width - 180mm • working height - 120 mm • motors on vertical spindles - 1 x 5.5 kW • motors on horizontal spindles - 4.0 and 5.5 kW • feed motor - 1.5 kW • total power 16.5 kW • electric adjustment of planing height • manual adjustment of planing width • 4 spindles of 35 mm diameter • vertical profiling heads, adjustable up/down (as in a low-spindle milling machine) • long insert table with dimensions 19 x 230 cm • 2 feed speeds (6 and 12 m/min) • spring-loaded roller pressure • tabletop lubrication pump • 120 and 150 mm extraction nozzles • weight - approx. 1110 kg Lodpfxewgdfqo Ahzerg • overall dimensions 332 x 113 x 170 cm (length x width x height) Additional information: • the machine requires inspection, it can be started but requires inspection, maintenance, replacement of bearings, etc. • the photos shown show the actual condition of the item for sale • the machine is available immediately

Condition: excellent (used), Year of construction: 1994, planing height: 120 mm, planing width: 190 mm, total width: 1,000 mm, total height: 1,570 mm, total length: 3,570 mm, workpiece weight (max.): 840 kg, power: 14.5 kW (19.71 HP), Good morning, We offer for sale a four-sided planer from the Italian company CASADEI model Syncro. To begin with, some useful information about the planer: * working width 190 mm * working height 120 mm * motor on vertical spindles - 5.5 kW ( one for 2 heads ). * motor on horizontal spindles - 7.5 kW ( one for 2 heads ). * total power 14,5 kW Lodpfx Aep H T S Ujhzsrg * electric adjustment of planing height * manual adjustment of planing width * 4 spindles equipped with aluminum spiral heads for replaceable plates * input sprocket in front of the first head * insertion table top with a length of 248 cm and a width of 19.5 cm * pump for manual lubrication of the tabletop * 2 working speeds of the machine ( 6 and 12 m/min ). * soundproofing cabin * set of pipes and extraction stubs. * original painting * overall dimensions 351 x 100 x 157 cm ( L x W x H ). * weight 840 kg * 1994 year of production The machine until the last days worked in the carpenter's shop, so it bears acceptable signs of use, nevertheless, it has undergone with us a comprehensive and rigorous inspection to eliminate any defects so you can be sure that the machine is in working order, does not require any financial contribution and is immediately ready for further work in your carpenter's shop.

Condition: as good as new (ex-display), Year of construction: 2025, Double side planer (Double Surface Planer ) extra wide 610 mm Maximum working width 610 mm Maximum working height 200 mm Heavy cardan feed system Special spike feedsystem Unlike the conventional chain drive systems, this machine employs a patented synchronized transmission system along the four fitting columns. Lredpfx Ajx Upt Aehzsg Electronic height adjustment Spiral cutterheads top and bottom Latest generation IE-3 motors Spindle and feed brakes CE

Condition: as good as new (ex-display), Year of construction: 2025, Double side planer (Double Surface Planer ) extra wide 400 mm Maximum working width 400 mm Maximum working height 200 mm Heavy cardan feed system Special spike feedsystem Unlike the conventional chain drive systems, this machine employs a patented synchronized transmission system along the four fitting columns. Electronic height adjustment Spiral cutterheads top and bottom Lrsdpfx Aox Uptishzsg Latest generation IE-3 motors Spindle and feed brakes CE

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, Four-sided planing machine, 4 axes, type SMARTMAC CE safety standards 3 x 400 Volt Standard machine LMC 423 S - O-R-L-B Infeed table 2500 mm Schneider touch screen EasySet NC control for pressure beam height Lrodsya H I Tspfx Ahzog 2 x NC controls for axes 3+4

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, Four-sided planing machine with 5 axes, type COMPACT CE safety standards 3 x 400 Volt Standard machine LMC 523 C - O-R-L-B-O Infeed table 2500 mm Pneumatic side pressure on left vertical axis Split top pressure roller Additional tables for multi-saw before axis 5 Lsdpfx Aheya H Igjzorg Anti kick-back safety device Schneider touch screen EASYSET NC control for pressure beam height 2 x NC control for axes 3+4

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 3,271 h, load capacity: 4,000 kg, lifting height: 7,530 mm, free lift: 2,420 mm, fuel type: electric, mast type: triplex, construction height: 3,070 mm, fork carriage width: 3,170 mm, fork length: 1,500 mm, empty load weight: 9,047 kg, total length: 2,850 mm, drive type: Elektro, construction width: 2,580 mm, Four-way side loader Load centre: 520 mm Fork width: 200 mm Fork thickness: 60 mm Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: very good Battery voltage: 48V Battery capacity: 930Ah Battery year: 2020 Description: In addition to this Hubtex model, we have around 200 heavy-duty forklifts, compact forklifts, standard forklifts & side loaders in stock at our Hamburg and Gdansk locations. Visit our homepage - sago-online. Lease purchase & financing at attractive rates always available. We are also happy to purchase your used equipment outright, even if you do not buy a vehicle from us. Our proprietor, Mr Peter Sawitzki, will gladly provide comprehensive advice on this MQ40. P.S.: Our forklift master workshop specialises in repair, maintenance, overhaul and special construction for forklifts from 8 tons upwards. We can also offer your vehicle for commission sale at our premises. Ledpex Efcfofx Ahzorg Fork positioner Fork positioner opening range: 560 / 3,110 mm Heating, full cab, full free lift Platform height: 500 mm

Condition: good (used), Year of construction: 1986, Number of boring spindles 2 St. Working width 180 mm Working height 120 mm Length of the planing table 2100 mm Feed motor 3,7 kW Ledjyb S E Tspfx Ahzerg

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 1,577 h, load capacity: 5,000 kg, lifting height: 6,450 mm, free lift: 1,900 mm, fuel type: electric, mast type: triplex, construction height: 3,210 mm, fork carriage width: 3,800 mm, fork length: 1,250 mm, empty load weight: 10,000 kg, total length: 3,690 mm, drive type: Elektro, construction width: 2,670 mm, Four-way side loader Fork width: 150 mm Fork thickness: 60 mm Mast type: Triplex Condition: Operational and fully functional Technical condition: Very good Front tires type: Superelastic Lrodpfxju Dyy Dj Ahzjg Front tires size: 355/45-15 Rear tires type: Superelastic Rear tires size: 18x7-8 Battery voltage: 80V Battery capacity: 930Ah Battery year: 2023 Description: In addition to this Combilift model, we have approx. 200 heavy-duty forklifts, compact forklifts, counterbalance forklifts & side loaders in stock at our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Hire-purchase & financing on favorable terms are always possible for us. We are also happy to purchase your used machine outright, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be pleased to provide you with detailed advice on this ESL5067. P.S.: Our forklift master workshop specializes in repair, maintenance, overhaul, and custom builds for forklifts from 8 tons. You are welcome to have us offer your vehicle for consignment sale as well. Fork positioner, Fork positioner opening range: 335 / 3,740 mm Heater, full cab, full free lift.

Condition: used, functionality: fully functional, Year of construction: 2003, operating hours: 12,640 h, load capacity: 4,000 kg, lifting height: 7,570 mm, free lift: 2,560 mm, fuel type: diesel, mast type: triplex, construction height: 3,490 mm, fork carriage width: 1,350 mm, fork length: 1,200 mm, empty load weight: 5,800 kg, total length: 2,200 mm, drive type: Diesel, construction width: 2,350 mm, Four-way side loader Load centre: 600 Fork width: 150 mm Fork thickness: 50 mm Mast type: Triplex Condition: Operational and fully functional Technical condition: very good Front tires type: Superelastic Front tires size: 27x10-12 Rear tires type: Superelastic Rear tires size: 200/50-10 Description: In addition to this Combilift model, we have around 200 heavy-duty forklifts, compact forklifts, counterbalance forklifts & side loaders in stock at our Hamburg and Gdańsk warehouses. Visit our website – sago-online. Lease purchase and financing on favorable terms are always available. We are also happy to purchase your used vehicle directly, even if you do not buy another vehicle from us. Our owner, Mr. Peter Sawitzki, will be pleased to advise you in detail about this C4000. P.S.: Our master forklift workshop specializes in repair, maintenance, overhaul and custom construction for forklifts from 8t upwards. We are also happy to display your vehicle for commission sale in our premises. Lsdpjwkkwbsfx Ahzjrg Fork positioner, Full free lift, Platform height: 540 mm

Condition: used, functionality: fully functional, Year of construction: 2001, operating hours: 8,613 h, load capacity: 4,000 kg, lifting height: 6,800 mm, free lift: 2,060 mm, fuel type: gas, mast type: triplex, construction height: 3,280 mm, fork carriage width: 3,100 mm, fork length: 1,150 mm, empty load weight: 6,100 kg, total length: 2,620 mm, drive type: Treibgas, construction width: 2,440 mm, Four-way side loader Load center: 600 mm Fork width: 150 mm Fork thickness: 50 mm Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: Very good Front tires type: Superelastic Lrodjxnd Urspfx Ahzeg Front tires size: 200/50x10 Rear tires type: Superelastic Rear tires size: 27x10-12 Description: In addition to this Combilift model, we have around 200 heavy duty forklifts, compact forklifts, forklift trucks, and side loaders available at our warehouses in Hamburg and Gdansk. Visit our homepage - sago-online. Leasing and financing on attractive terms are always possible for us. We also gladly purchase your used machines directly, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be pleased to provide you with detailed advice on this C4000. P.S.: Our master forklift workshop specializes in repair, maintenance, overhaul, and custom builds for forklifts from 8 tons. We are also happy to offer your vehicle on consignment sale in our facility. Fork positioner, Fork positioner opening range: 660 / 3001 mm; Full free lift, Platform height: 540 mm

Condition: used, functionality: fully functional, Year of construction: 2010, operating hours: 6,496 h, load capacity: 2,500 kg, lifting height: 6,540 mm, free lift: 2,000 mm, fuel type: gas, mast type: triplex, construction height: 2,780 mm, fork carriage width: 1,440 mm, fork length: 1,200 mm, empty load weight: 6,200 kg, total length: 1,580 mm, drive type: Treibgas, construction width: 1,540 mm, Four-way sideloader Load center of gravity: 600 Fork width: 125 mm Fork thickness: 50 mm Lredpfxeu Dyzuo Ahzeg Mast type: Triplex Condition: Ready for use and fully functional Technical condition: Very good Front tires type: Bandages Front tires size: 22x10x16 non-marking Rear tires Type: tires Rear tires size: 16x7x10,5 non-marking Description: In addition to this Combilift model, we have approx. 200 heavy-duty forklifts, compact forklifts, forklift trucks & sideloaders in our warehouse in Hamburg and Gdansk. Visit our homepage - sago-online Hire purchase & financing at favorable conditions are possible for us at any time. We are also happy to buy your used truck free of charge, even without you purchasing a vehicle from us. Our owner Mr. Peter Sawitzki will be happy to advise you in detail about this C2500CB P.S.: Our forklift master workshop is specialized in repair, maintenance, overhaul and special construction for forklifts from 8 tons. We are also happy to display your vehicle for sale on consignment. Sideshift, heating, full cab, full free lift,

Condition: used, functionality: fully functional, Year of construction: 2008, operating hours: 14,440 h, load capacity: 3,000 kg, lifting height: 4,600 mm, free lift: 2,180 mm, fuel type: gas, mast type: duplex, construction height: 2,850 mm, fork carriage width: 1,200 mm, fork length: 1,400 mm, empty load weight: 5,300 kg, total length: 2,000 mm, drive type: Treibgas, construction width: 2,470 mm, Four-way Side Loader Lodpfx Ahsxfmpmszorg Load Center: 600 mm Fork Width: 150 mm Fork Thickness: 50 mm Mast Type: Duplex Condition: Ready for operation and fully functional Technical Condition: Very good Front Tyres Type: Cushion tyres Front Tyres Size: 16x7-10.5 Rear Tyres Type: Superelastic Rear Tyres Size: 23x10-12 Description: In addition to this Combilift model, we have around 200 heavy-duty forklifts, compact forklifts, forklift trucks & side loaders in stock in our warehouses in Hamburg and Gdańsk. Visit our homepage at sago-online. Lease-purchase and financing on favourable terms are always possible for us. We are also happy to purchase your used equipment outright, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be pleased to provide you with detailed advice on this C3000. P.S.: Our master forklift workshop specialises in repair, maintenance, refurbishment, and custom builds for forklifts from 8 tonnes upwards. We are also happy to offer your vehicle for commission sale at our premises. Sideshift fork positioner, Heater, Full cabin, Full free lift, Platform height: 500 mm

Condition: used, functionality: fully functional, Year of construction: 2003, operating hours: 9,871 h, load capacity: 5,000 kg, lifting height: 6,040 mm, free lift: 870 mm, fuel type: electric, mast type: simplex, construction height: 4,030 mm, fork carriage width: 1,760 mm, fork length: 1,620 mm, empty load weight: 10,694 kg, total length: 4,200 mm, drive type: Elektro, construction width: 2,770 mm, Four-way sideloader Load center of gravity: 800 Fork width: 200 mm Fork thickness: 50 mm Mast type: Standard Condition: Ready for use and fully functional Technical condition: Very good Front tires type: Drums Front tires size: 660/250-480 Rear tires type: Drums Rear tires size: 413/178-285.8 Battery voltage: 80V Lredpfju Dy A Eox Ahzog Battery Ah: 775Ah Battery year of manufacture: 2017 Description: In addition to this Baumann model, we also have approximately 200 heavy-duty forklifts, compact forklifts, forklifts, and sideloaders in our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Hire purchase and financing at favorable conditions are always available. We are also happy to purchase your used vehicle on an over-the-counter basis, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this 50/18/60 STC8.5. P.S.: Our forklift workshop specializes in repairs, maintenance, overhauls, and custom construction for forklifts weighing 8 tons and above. We would also be happy to display your vehicle for consignment sale. Fork positioner, Platform height: 530 mm