Used Four-Side Planing Machine for sale (80,226)

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 90240, Weinig four-sided planer, model Profimat 23E, manufactured in 2000. Type: P-23 E Dsdpfozav Icox Akiekp Year of manufacture: 2000 Machine no.: 90240 Voltage: 380 V Frequency: 50 Hz The machine has been used very rarely and has mostly been kept as a backup for material calibration.

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, feed rate X-axis: 24 m/min, working width: 230 mm, working height: 120 mm, spindle speed (max.): 6,800 rpm, table length: 2,500 mm, TECHNICAL DETAILS Working width: 20-230 mm Working height: 8-120 mm Spindle speed: 6,800 rpm Feed speed: 5-24 m/min Table length: 2,500 mm MACHINE DETAILS Spindle connection power: 11 kW Number of spindles: 6 EQUIPMENT Dkedpfxew R T Uze Akisp ATS system with automatic 2-axis positioning for spindle 3 and 4 Mechanical brake for all motors Spindle can be used universally, 360° Note: The U-spindle is not included. A new one costs approximately €5,000.

Condition: used, Year of construction: 2001, functionality: fully functional, planing height: 170 mm, spindle diameter: 40 mm, planing width: 230 mm, – German-made – Year of manufacture: 2001 – Total power: 42 kW – Driven rollers in the table TECHNICAL SPECIFICATIONS: – Planing width: 230 mm – Planing height: 170 mm – Electric height adjustment – Spindle diameter: 40 mm – 1st (bottom) spindle: 7.5 kW – 2nd (left) spindle: 11 kW – 3rd (right) spindle – 4th (top) spindle: 11 kW – 5th (bottom) spindle: 5.5 kW Dedpfx Aow H Smhokiokp – Continuously variable feed speed: 6–38 m/min – Feed motor power: 4 kW – Infeed table length: 1000 mm – Electric brakes – 5 driven top steel rollers – 1 driven top rubber roller – 2 driven table rollers: one is toothed – Air cushion in the table – Pneumatic pressure system – Feed via cardan shafts – Outlet diameter: 5 x 140 mm – Centralized table lubrication system – Machine dimensions (L/W/H): 390 / 210 / 230 cm – Weight approx. 4000 kg

Condition: good (used), Year of construction: 2000, Leadermac LMC 523 Smartmac four side planer - year of production 2000 - DTR - electronic height and width adjustment - possibility to save permanent parameters TECHNICAL PARAMETERS: - planing width 230 mm - planing height 140 mm - diameter of the spindles 40 mm 1 lower spindle 7.5 kW 2 right spindle 5.5 kW 3 left spindle, 5.5 kW 4 upper spindle 7.5 kW 5 lower spindle 7.5 kW smoothly adjustable feed 3 kW feed motor power electronic height adjustment electronic adjustment of the left head feed on cardan shafts five top steel pull rollers two upper rubber pulling rollers one role in the table top pulling Dsdpoifftxofx Akiskp pneumatic material pressure minimum material length 400 mm length of the preliminary table 2000 mm chrome tables stub diameter 5 x 125 mm Machine dimensions 370 x 200 x 190 cm weight ~ 3000 kg

Condition: good (used), Working width 220mm Dkedpfxstuyawo Akiop Working height 120mm Number of spindles 5 Arrangement of spindles Bottom 5.5kw Right Left 11kw Top 10.5kw Universal 11kw Feed motor 2.2kw Feed on cardan shafts Pneumatic pressure pads

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, Table lenght 2000 mm. Workingwidth: max. 230 mm / min. 18 mm. Dkodpfx Akexr U Azjiep Workingheight: max. 150 mm / min. 8 mm el height adjustable Speed 7-36 m/min. 3,7 kw motor, cardan 5 pcs. Ø 40 mm. spindels: b + r + l + t + b (specifikations see file attached Siemens touchscreen see all technical features attached file

Condition: reconditioned (used), functionality: fully functional, Refurbished four-sided planer by SCM GROUP. The simple and robust design ensures long-term durability and high performance. The rigid steel machine base guarantees machining accuracy and quality. The machine is intended for larger operations specializing in the production of shaped and straight profiles. Features: - 5 working spindles: bottom, right, left, top, bottom - Automatic central lubrication of the working table - Material feed speed variator - Inspected machine with half-year warranty - Excellent technical condition - Equipped with tooling Technical data: - Working width (finished profile thickness) min/max: 25 / 230 mm - Working height (finished profile thickness) min/max: 6 / 120 mm Dkjdpfx Aksvxtzasiep - Table length: 2000 mm - 1st spindle (bottom): approx. 5 kW - Right and left spindle: approx. 7 kW - 4th spindle (top): approx. 7 kW - 5th spindle (bottom): approx. 5 kW - Tool speed: 6000 rpm - Stepless feed speed: 4 - 24 m/min - Feed motor: 4 kW - Weight: approx. 3000 kg

Condition: good (used), Year of construction: 2003, functionality: fully functional, 1.High-Speed Planer/Moulder WACO MAXI 8 spindles for horizontal splitting, feed speed 20-150 m/min Dedpfx Akoy S R Agjiekp Working width planing: 30-300 mm Working height planing: 10-150 mm Cutting circle- 180-260 mm Operating voltage: - 400 Volts, 50 Cycles Main feed motor - 37 kW Frequency concerter - 45 kW 1.Bottom head - 24,5 kW 2.Top head - 30 kW 3.Right side head - 18,5 kW 4.Left side head - 30 kW 5.Right side head -18,5 kW 6.Left side head - 24,5 kW Horizontal splitting: 7.Right side head - 53 kW 8.Left side head - 53 kW Max working width 200 mm Max working height 63 mm Max saw blade diameter 300 - 400 mm Spindle diameter 50 mm Vertical adjustability 10 mm Spindle speed 5.500 v/min Exhaust connection 2 x Æ 160 mm Unit lenght 1300 mm 2. High-Speed Planer/Moulder WACO MAXI 3 spindles for finishing, feed speed 30-300 m/min Main feed motor - 37 kW Frequency converter - 45 kW Feed speed, variable: 30-300 m/min 1.Beading head: 24,5 kW 2.Top head 24,5 kW 3.Rotaplan head 30 kW

Year of construction: 1971, condition: used, Shaft Arrangement 1. Lower shaft – 4 kW, 2850 rpm 2. Right side shaft – 3 kW, 2850 rpm 3. Left side shaft – 3 kW, 2850 rpm 4. Right side shaft – 3 kW, 2850 rpm 5. Upper shaft – 5.5 kW, 2850 rpm 6. Lower shaft – 4 kW, 2850 rpm Dimensions: Dsdpfjigqzrjx Akiokp 4900 mm x 1300 mm x H 1500 mm Weight: approx. 5500 kg

Year of construction: 1989, condition: excellent (used), 8 heads The last universal head. Max planing height 130mm Max planing width 240mm Driven rollers in the table - for wet wood Repeatable heads, two on each side Smooth adjustment of the feed speed Cardan feed Dsdpfxsmi A Dzo Akiskp

Year of construction: 1996, condition: excellent (used), working width 230mm working height 120mm 8 heads arrangement of heads: bottom (grooved)/right/left/right/top/top/bottom/universal head adjustment in two axes spindle diameter 40mm smooth adjustment of the feed speed Dkedjlx Ei Rjpfx Akisp digital displays of working dimensions electric adjustment of the pressure beam, left and upper heads pneumatic clamps of the pulling rollers grooved top

Year of construction: 1987, condition: excellent (used), working width 170 mm planing height 120 mm table surface length 1950 mm 5 spindles: 1. lower 2. right 3. left 4th top 5. universal feed speed 6.5 - 49 m/min. Dkodjlx Em Uspfx Akiep cardan feed electrically lifted pressure beam

Year of construction: 1990, condition: not inspected (used), Working width: 180 mm Height: 120 mm Fifth universal spindle Dodpfxeigzhho Akijkp Feed table length: 2.47 m Spindle diameter 40 mm Overall length: 4.95 m Depth: 1.64 m Height: 1.52

Condition: excellent (used), Year of construction: 2004, working width: 300 mm, planing height: 120 mm, spindle diameter: 50 mm, planing width: 300 mm, working height: 1,000 mm, total width: 2,800 mm, total height: 2,400 mm, total length: 3,800 mm, overall weight: 13,000 kg, power of feed motor: 24,000 W, spindle speed (min.): 5,500 rpm, rotational speed (max.): 6,000 rpm, rotational speed (min.): 5,500 rpm, height adjustment type: electric, planer shaft diameter: 205 mm, workpiece height (max.): 120 mm, workpiece width (max.): 330 mm, input voltage: 400 V, tool diameter: 205 mm, number of spindles: 5, power: 154 kW (209.38 HP), table width: 330 mm, 4-Sided Lamella Planer 300 x 120 mm Adjustable feed speed from 30 to 150 m/min. Equipment: 2 upper and lower horizontal cutterheads Z 10; 2 right and left horizontal cutterheads, Z 10, equipped with jointers. - Horizontal shaft rotation speed: 5,500 rpm Dkodewz Nzmepfx Akijp - Vertical spindle rotation speed: 6,000 rpm - Vertical spindle shaft diameter: 50 mm - Vertical spindle clamping length: max. 185 mm Tool diameters: - Horizontal shafts: 205 mm - Vertical spindle head tools: 160 - 205 mm Cutter blocks: - Thicknessing and surfacing shafts with cutter blocks: - 2 x Planer head 205 x 330 mm, Z=10, screw clamping - Lamella planer knives: 3 x 35 x 330 - 2 x Hydraulic planer head 190 x 130 mm, Z=10, screw clamping - Lamella planer knives: 3 x 35 x 130 - Weight: approx. 13,000 kg - Machine dimensions L x W x H: approx. 3,800 x 2,800 x 2,400 mm - Installed power: 154 kW Additional Aggregates Lower Scoring Saw Unit This unit is used for milling balance scores on the lower edge of worked lamellas with a width over 200 mm. The saw blade is mounted directly onto a flat motor using a flange. Horizontal movement is pneumatic with a saw stroke of approx. 150 mm (movement within the gap between boards; activated by a mobile spot sensor). The scoring zone is set manually, and the travel distance is displayed on a counter. Vertical movement uses a pneumatic cylinder with a saw stroke of approx. 30 mm (to allow quick switching between lamellas with/without balancing slots during processing). The end stop for scoring depth is set manually, and travel is displayed on a counter. Lamellas must be fed into the machine individually, one by one (not in continuous push feed). Technical Data: - Scoring saw motor: 15 kW - Saw rotation speed: 5,000 rpm - Shaft diameter: 40 mm - Max. cutting depth: 50 mm - Tool diameter: 300 x 4 mm - Extraction hood support diameters: 120 mm - Additional feed rollers: one above (diameter 240 mm), one below (240 mm, toothed and hard-chromed). The scoring saw is delivered with a blade. - Scoring saw working area: 37.5 to 225 mm Powered Lateral Infeed Roller Pneumatically suspended. Motorized width adjustment via push-buttons (if the positioning command is set to position adjustment (option), the lateral pressure roller can be adjusted from the control panel). The set width is shown on a SIKO counter. - Roller diameter: 190 mm - Roller width: 40 mm Automatic Knife Jointing Device The knife jointing device is fixed-mounted and manually operated.

Year of construction: 2010, condition: ready for operation (used), functionality: fully functional, Due to equipment replacement, a Changa Iron Cm-767C four-sided moulder, year 2010, is for sale. In working condition. 6 spindles. Working width 18–230 mm, height up to 150 mm. Feed speed up to 36 m/min. Suitable for planing and profiling timber materials. Djdoy N Eb Sepfx Akiokp Located in Kandava, inspection possible. Available immediately.

Condition: used, functionality: fully functional, OMB Four-Sided Planer/Moulder Specifications: • Condition - Used • Manufacturer - OMB • Working width 140 mm • Working height 80 mm • Spindle motors - 4 x 1.8 kW (separate motor for each head) • Motors with left/right rotation • Manual height adjustment for planing • Manual width adjustment for planing • Vertical spindle adjustment up/down (as in an up-cutting router) • Machine without heads • 4 feed speeds, infinitely adjustable • Dust extraction nozzles, diameter 100 mm • Overall dimensions 180 x 120 x 130 cm (L x W x H) Additional information: • Perfect, original technical condition of the machine, after a complete overhaul • The photos show the actual condition of the item for sale Dksdpfxey Tpf Ao Akiop • Possibility to switch on and inspect the device on site • Free training on machine operation (at the company's premises) • The price stated in the auction does not include VAT and transport costs Financing and transport: • We organize transport using the MDD fleet, courier companies, or external carriers • We provide financial support in the form of leasing or a lease loan

Condition: good (used), Planer moulder 230/120 mm, profiling capable, year 2006 Dkjdpfxexn Uptj Akiep

Condition: ready for operation (used), functionality: fully functional, Maximum planing width: 230 mm Maximum planing height: 120 mm Spindle diameter: 40 mm 4 heads plus one universal head Head configuration: Bottom, right, left, top, universal Motor power: 4 kW (bottom), 5.5 kW (right), 4 kW (left), 4 kW (universal) Spindle rotation speed: 6000 RPM Table lubrication Electric height adjustment (up/down) Two feed speeds Year of manufacture: 1999 Dodpsy N Rb Rjfx Akiskp Weight: 2320 kg Voltage: 400 V

Condition: excellent (used), Year of construction: 1992, Weinig Hydromat 22 BL planer with destacker Year: 1992 Feed: 60 m/min Heads: 1. lower – 11 kW 2. right side – 7.5 kW Dodpfoyymqvox Akijkp 3. left side – 7.5 kW 4. upper – 11 kW 5. lower – 7.5 kW 6. upper – 7.5 kW 6 feed rollers in the table Feed motor – 15 kW Planing width – 170 mm Planing height – 120 mm Machine mounted on an elevated platform.

Year of construction: 2008, condition: like new (used), Four-side planer Weinig Powermat 500 - year of production 2008 - German production - PowerCom control - saving profiles with tools and positions - PowerLock tool holder TECHNICAL PARAMETERS: planing width 300 mm planing height 200 mm PowerLock tool attachment PowerCom control with positioning of the upper and left spindles 1 spindle 11kW 2 spindle 11 kW 3 spindle 11 kW 4 spindle 15 kW 5 spindle 15 kW milling spindle 1.5 kW 12000 rpm Djdpfoltla Sox Akiekp spindle speed 8000 rpm feed continuously adjustable 6-36 m/min feed motor power 4kW five upper steel pulling rollers one rubber upper pulling roller one roller in the top pulling air cushion in the table automatic central table lubrication automatic lubrication of spindle guides length of the feeding table 1970 mm spigot diameter 2x140 mm 3x160 mm 1x80 mm total power 70 kW 140 A Machine dimensions 500x225x242 cm weight 3000 kg

Condition: ready for operation (used), KUPFERMUHLE four-sided planer with additional table, multi-saw 600x200mm - after technical overhaul - made in Germany - STRIPPING HEIGHT TWO SIDES 200 mm - ideal for wet wood - electrical height adjustment - double feed chain - additional pre-table with head 340 mm - additional material feed system TECHNICAL PARAMETERS: planing width 600 mm planing height on two sides planing height on four sides 200 mm 100 mm power of vertical spindles motors 2 x 5.5 kW power of lower shaft motors 7,5 kW power of top spindle motor 11 kW power of first head motor 4 kW power of multi-saw engine 15 kW vertical heads adjustable four top drawing shafts three bottom drawing shafts Dsdpfx Akjr Iik Ioijkp two receiving drawing rollers 4 knives per shaft shaft diameter 145mm six types of feed speed 7 / 9 / 11,5 / 14 / 18 / 23 m/min 2 rows of anti-rejection pawls diameter of spindles 40 mm blade diameter max 250 mm spindle length 340 mm overall dimensions (L/W/H) 400 x 210 x 180 cm weight 3900 kg

Condition: like new (used), Year of construction: 2010, planing height: 200 mm, Weinig Powermat 2000 XL four-sided planer: - German manufacture - DTR CE - automatically controlled - PowerLock heads - year of production 2010 - for wet wood TECHNICAL PARAMETERS: - planer width: 300 mm - planing height: 200 mm - PowerLock heads - control from the touch panel - electronically adjustable heads - pneumatically pressed heads 1 bottom head: 18.5 kW 2 right head: 15 kW 3 left head: 15 kW 4 top head 22 kW with side cutter: 1.5 kW 5 Overhead: 18.5 kW 6 Lower head: 20 kW Dsdjun Natjpfx Akijkp - heads with automatic jointing system - spindles speed: 8000 rpm - inverter-controlled feed speed: 6 - 60 m/min - six steel drawing top rollers - three rubber trailing top rollers - top feed rollers with support - six rollers in the drawing table, of which 2 milled in front of the first head - automatic central lubrication - spigot diameter: 4 x 160 and 2 x 140 mm

Condition: excellent (used), Feed table for a four-sided planer TECHNICAL SPECIFICATIONS: max. workpiece length 5000 mm min. workpiece length 400 mm max. workpiece width 330 mm Dodpfxshtq Ams Akiekp max. element thickness 120 mm roller motor power 1.1 kW 1.5 kW chain motor power adjustable feed on the inverter 7 guide chains 13 steel feed rollers roll diameter 90 mm height of the rollers from the base 820 mm pneumatic pressure height of the rollers from the base 820 mm dimensions (length / width / height) 600/240/155 cm weight ~ 1500 kg

Condition: excellent (used), Year of construction: 2011, Four Side Planer SCM Compact NTE - after the technical review - Italian production - year of production 2011 TECHNICAL PARAMETERS: planing width 240 mm planing height 130 mm spindle diameter 40 mm Dksdpfx Akjgyflcsijp spindle speed 6000 rpm 1 lower spindle 3 kW 2 right spindle 7.5 kW 3 left spindle 5.5 kW 4 upper spindle 6 kW 5 lower spindle 5.5 kW six top pull rollers pneumatic pressure adjustable feed on the inverter feed speed range 5-25 m / min adjustable heads table top length 2480 mm electric brakes nozzles diameter 2 x 180 mm and 2 x 150 mm dimensions of the machine (length / width / height) 340/160/170 cm weight 2480 kg

Condition: good (used), Year of construction: 2007, SCM Compact XL four-side planer - Italian production - year of production 2007 TECHNICAL PARAMETERS: planing width 230 mm planing height 120 mm 1) horizontal, lower 230 mm 5.5 kW 2) vertical right 130 mm 3) vertical left 130 mm (2nd and 3rd spindle) 11 kW 4) horizontal, top 230 mm 7.5 kW all spindles up / down, right / left spindle diameter 40 mm from the top 3 introducing rollers, metal, torsion, including 2 double top pulling roller, double rubber pressure 1 pc on the side a rubber pulling roller in the lower table top feed on cardan shafts pneumatic clamps smooth regulation of the feed speed 5-22 m / min 1.1 kW feed motor electric setting of the planing thickness 0.37 kW lifting motor the length of the introducing table top 2470 mm locked in the cabin central lubrication of the table top diameter of the extraction nozzle 150 and 180 mm Dkedpfohrdmiox Akisp dimensions (length / width / height) 3650/1200/1600 mm weight approx. 1500 kg