Used Four-Side Planing Machine for sale (107,941)

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 5,731 h, load capacity: 11,400 kg, lifting height: 4,230 mm, fuel type: diesel, mast type: standard, construction height: 3,420 mm, fork carriage width: 4,860 mm, fork length: 1,600 mm, empty load weight: 18,300 kg, total length: 4,050 mm, drive type: Diesel, construction width: 3,300 mm, Four-way side loader Load centre of gravity: 600 Fork width: 250 mm Fork thickness: 100 mm Mast type: Standard Condition: Ready for use and fully functional Technical condition: very good Front tires type: bandages Front tires size: 1016x508x762 Rear tires type: super elastic Cjdpjxpkwvofx Aacohd Rear tires size: 400/60-15 Description: In addition to this Combilift model, we have around 200 heavy-duty forklifts, compact forklifts, forklifts & side loaders in our warehouse in Hamburg and Gdansk. Visit our homepage - sago-online Hire purchase & financing at favorable conditions are always possible for us. We are also happy to buy your used vehicle freely, even without you purchasing a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this C14000 P.S.: Our forklift master workshop specializes in repairs, maintenance, overhauls and special construction for forklifts from 8 tons. We would also be happy to exhibit your vehicle for commission sale. Fork positioner, Heating, full cabin, Platform height: 1010 mm

Condition: ready for operation (used), Year of construction: 2020, Longitudinal sealing: continuous, photo cells: horizontal/vertical, working height range: 760mm-960mm, max. transport speed: 30m/min, film core diameter: 76mm, max. film roll diameter: 350mm, max. film roll width: 650mm, sealing stamp width: 300mm, product width range: 50mm-410mm, product height range: 1mm-250mm, min. product length: 50mm, film thickness range: 7µm-80µm, max. output rate: 85cycles/min, materials: POF/PE/PVC/PLA/bio films. Machine dimensions X/Y/Z: approx. 2200mm/1700mm/1800mm, weight: approx. 800kg. Documentation available. An on-site inspection is possible. Cedpfjxuvnqsx Aacshd

Condition: used, Weinig Powermat 700 planer and moulder with CNC control for four-sided planing and profiling of wood. Available by arrangement from March 2026. Sale of this machine is subject to the sale of the briquetting press (Ref. No. 800055) or the entire planing unit (Ref. No. 100101). spindle: 6 spindle 1: Bottom / 7.5 kW / 6,000 rpm spindle 2: Right / 15 kW / 8,000 rpm spindle 3: Left / Common motor with #2 / 8,000 rpm spindle 4: Top / 11 kW / 8,000 rpm spindle 5: Top / 7.5 kW / 8,000 rpm spindle 6: Bottom / 7.5 kW / 8,000 rpm working width: 230 mm working height: 160 mm spindle diameter: 40 mm feed: 40 m/min / 5 kW Chsdpfxexpuufe Aacsd Planer table length: 1.200 mm Control: Memory Plus

Condition: used, machine/vehicle number: 11974, load capacity: 5,000 kg, lifting height: 5,500 mm, free lift: 450 mm, mast type: duplex, construction height: 4,050 mm, fork length: 2,100 mm, total length: 3,250 mm, drive type: Elektro, construction width: 3,000 mm, Four-way sideloader Chassis number: 11974 Load center: 1050 mm ISO class: ISO class 4 = 5,000 - 10,000 kg Mast type: Duplex Codeu D R Huopfx Aacjhd Technical condition: very good Front tires type: Vulkollan Front tires Size: 2-fold new Front tires Condition: 80 - 100% Rear tires Type: Vulkollan Rear tires Size: 4-ply new Rear tires Condition: 80 - 100% Battery Volt: 80V Battery Ah: 775Ah Battery manufacturer: New with Aquamatic 5PzS Battery year of construction: 2017 Battery condition: 80 - 100% Description: Travel drive 2x5kW, working hydraulics 2 x 8 kW, steering hydraulics 1x1.5kW height extended 6650 mm platform height 420 mm frame cutout 1300 mm mast extension 2200 mm The machine is sanded down repainted, all motors newly revised new hydraulic hoses and new tires, new battery with Aquamatic and charger so the machine is as good as new again Fork positioner, implement length over carrier 3950 mm fork adjustment 580-3300 mm fork tilt +/-3.5° side guide rollers on request Roof cover, Glazed cab front and rear

Condition: excellent (used), CATALOG NUMBER 7164 TECHNICAL DATA - Max processing width: 220 mm - Max processing height: 130 mm 4 spindles: 1) Bottom horizontal: 220 mm, approx. 5.5 kW 2) Right vertical: 130 mm 3) Left vertical: 130 mm; (spindles 2 & 3) 7.5 kW 4) Top horizontal: 220 mm, 7.5 kW - 4th spindle adjustment: electrically adjustable up/down - All spindles adjustable up/down, right/left - Spindle diameter: 40 mm - Top: 4 driven infeed rollers, toothed - Top: 1 driven outfeed roller, rubber - Bottom: 1 driven outfeed roller, rubber - Feed on Cardan shafts Chjdpop Dupgjfx Aacod - Variable feed speed adjustment - Feed motor: 1.5 kW - Lifting motor: 0.75 kW - Electric thickness adjustment - Infeed table length: 1960 mm - Central lubrication - Extraction port diameter: 3x120 mm, 140 mm - Enclosed in soundproof cabin - Dimensions (L/W/H): 3430x1500x1430 mm - Weight: approx. 1500 kg – 4-head model – German-made – Not repainted – Used planer, in very good condition Net price: 35,900 PLN Net price: 8,550 EUR (depending on EUR/PLN rate at 4.2) (Prices subject to change according to exchange rate fluctuations)

Condition: good (used), Planer moulder 230/120 mm, profiling capable, year 2006 Chedpfxsxn Upto Aacsd

Condition: used, functionality: fully functional, Year of construction: 2012, operating hours: 11,045 h, load capacity: 4,500 kg, lifting height: 6,520 mm, free lift: 2,200 mm, fuel type: gas, mast type: triplex, construction height: 3,210 mm, fork carriage width: 6,000 mm, fork length: 1,350 mm, empty load weight: 7,290 kg, total length: 2,350 mm, drive type: Treibgas, construction width: 2,700 mm, Four-Way Side Loader Load centre: 600 mm Fork width: 165 mm Chedpfx Ajw Hh D Rjacjd Fork thickness: 65 mm Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: Very good Front tyre type: Superelastic Front tyre size: 200/50-10 Rear tyre type: Superelastic Rear tyre size: 2.50-15 Description: In addition to this Hubtex model, we have approximately 200 heavy-duty forklifts, compact forklifts, counterbalance forklifts, and side loaders available at our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Hire purchase and financing on favourable terms are always possible. We are also happy to purchase your used equipment outright, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail regarding this DQ45-G. P.S.: Our master forklift workshop specializes in repair, maintenance, refurbishment, and custom construction for forklifts from 8 tons upward. We are also happy to offer your vehicle for sale on commission in our facility. Telescopic forks: 1,350 / 2,340 mm; Crossbeam: Length 6,000 mm, 2x forks 150 x 60 x 1,360 mm Heater, full cabin, full free lift,

Year of construction: 1999, condition: ready for operation (used), A four-side planer Weinig is available. Working width: 230mm, working height: 120mm, feed rate: 24m/min, machine dimensions X/Y/Z: approx. 3500mm/2000mm/2000mm, weight: approx. 3500kg. An on-site inspection is possible. Csdpfx Ajxpw Uhsacshd

Condition: used, Year of construction: 2014, Weinig Powermat 600 planer and moulder for four-sided planing and profiling of wood. spindles: 5 Construction year: 2014 working width: 230 mm working height: 160 mm spindle 1: Bottom // 7.5 kW // 40 mm Codpfoxpvdzsx Aacehd spindle 2: Right // 11 kW // 40 mm spindle 3: Left // according to motor with spindle 2 // 40 mm spindle 4: Top // 7.5 kW // 40 mm spindle 5: Bottom // 5.5 kW // 40 mm

Condition: excellent (used), Catalog number: 7294 TECHNICAL DATA - Maximum workpiece width: 230 mm - Minimum workpiece width: 15 mm - Maximum workpiece height: 160 mm - Minimum workpiece height: 10 mm 7 spindles: 1) bottom horizontal 230 mm 7.5 kW 2) right vertical 160 mm 5.5 kW 3) left vertical 160 mm 5.5 kW 4) right vertical 160 mm 5.5 kW 5) top horizontal 230 mm 7.5 kW 6) upper horizontal 230 mm 7.5 kW 7) lower horizontal 230 mm 5.5 kW - All spindles adjustable vertically and horizontally - Spindle diameter: 40 mm - Spindles 3, 5, and 6 are electrically adjustable from the control panel to the required dimension (ATS) - Motor: 2 x 0.37 kW - Spindle diameter: 40 mm - All spindles equipped with a brake Top feed: - 8 feed-in rollers, toothed, metal, including 2 double rollers - 3 feed-out rollers, rubber, double Bottom feed: - Feed-in roller, toothed, driven, pivoting - 3 feed-out rollers, driven, metal, smooth - Rollers pneumatically loaded - Infeed table length: 2480 mm - Centralized table lubrication - Electric thickness adjustment - Body lifting motor: 0.56 kW - Infinitely variable feed speed via inverter: 6–24 m/min - Feed motor: 3.7 kW Chjdsryv Nyopfx Aacjd - Feed by Cardan shafts - Extraction nozzle diameter: 7 x 125 mm - Dimensions (L/W/H): 5520 x 1930 x 1900 mm - Weight approx. 4000 kg ADVANTAGES – Equipped with 7 heads – Ideal for both wet and dry timber – With ATS – Original DTR + CE documentation – Unrepainted – Used planer, in excellent condition Original photos Net price: 169,900 PLN Net price: 40,450 EUR (based on exchange rate of 4.2 EUR) (Prices may vary due to exchange rate fluctuations)

Condition: used, functionality: fully functional, Year of construction: 2001, operating hours: 8,613 h, load capacity: 4,000 kg, lifting height: 6,800 mm, free lift: 2,060 mm, fuel type: gas, mast type: triplex, construction height: 3,280 mm, fork carriage width: 3,100 mm, fork length: 1,150 mm, empty load weight: 6,100 kg, total length: 2,620 mm, drive type: Treibgas, construction width: 2,440 mm, Four-way side loader Load center: 600 mm Fork width: 150 mm Fork thickness: 50 mm Mast type: Triplex Condition: Ready for operation and fully functional Chodpfx Aexnd Ursacjd Technical condition: Very good Front tires type: Superelastic Front tires size: 200/50x10 Rear tires type: Superelastic Rear tires size: 27x10-12 Description: In addition to this Combilift model, we have around 200 heavy duty forklifts, compact forklifts, forklift trucks, and side loaders available at our warehouses in Hamburg and Gdansk. Visit our homepage - sago-online. Leasing and financing on attractive terms are always possible for us. We also gladly purchase your used machines directly, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be pleased to provide you with detailed advice on this C4000. P.S.: Our master forklift workshop specializes in repair, maintenance, overhaul, and custom builds for forklifts from 8 tons. We are also happy to offer your vehicle on consignment sale in our facility. Fork positioner, Fork positioner opening range: 660 / 3001 mm; Full free lift, Platform height: 540 mm

Condition: excellent (used), CATALOG NUMBER: 6575 TECHNICAL DATA - Max. workpiece width: 230 mm - Max. workpiece height: 170 mm - 7 spindles: 1) Lower horizontal 230 mm, 11 kW 2) Right vertical 170 mm 3) Left vertical 170 mm (2nd and 3rd spindle), 11 kW 4) Right horizontal 170 mm, 5.5 kW 5) Upper horizontal 230 mm, 11 kW 6) Lower horizontal 230 mm, 7.5 kW 7) Universal 230 mm, adjustable in 360°, 7.5 kW - All spindles adjustable up/down, right/left - Spindles 3 and 5 are electrically adjustable - ATS system - Spindle diameter: 40 mm - Electric brakes - Top: 4 infeed driven rollers, serrated, including 1 double roller - Top: 1 double rubber infeed roller - Top: double rubber outfeed roller - Bottom: 2 smooth steel driven rollers - Bottom: double rubber driven roller - Power feed via Cardan shafts - Pneumatically pressed rollers - Infinitely variable feed speed: 6–24 m/min - Feed motor: 5.5 kW - Electric thickness adjustment - Motorized elevation of machine body: 0.55 kW - Centralized table lubrication - Extraction outlet diameter: 7 x 140 mm - Dimensions (LxWxH): 5800 x 2050 x 1850 mm - Weight approx.: 4500 kg ADVANTAGES – Made in Germany, WEINIG brand – With 7 heads – Universal spindle – With ATS system – For processing wet and dry timber – Used moulder, condition: very good Net price: 169,900 PLN Chsdpfx Aaolrvhceced Net price: 40,450 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (price subject to change in case of significant currency fluctuations)

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 1,577 h, load capacity: 5,000 kg, lifting height: 6,450 mm, free lift: 1,900 mm, fuel type: electric, mast type: triplex, construction height: 3,210 mm, fork carriage width: 3,800 mm, fork length: 1,250 mm, empty load weight: 10,000 kg, total length: 3,690 mm, drive type: Elektro, construction width: 2,670 mm, Four-way side loader Fork width: 150 mm Fork thickness: 60 mm Mast type: Triplex Codpfx Asu Dyy Deacohd Condition: Operational and fully functional Technical condition: Very good Front tires type: Superelastic Front tires size: 355/45-15 Rear tires type: Superelastic Rear tires size: 18x7-8 Battery voltage: 80V Battery capacity: 930Ah Battery year: 2023 Description: In addition to this Combilift model, we have approx. 200 heavy-duty forklifts, compact forklifts, counterbalance forklifts & side loaders in stock at our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Hire-purchase & financing on favorable terms are always possible for us. We are also happy to purchase your used machine outright, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be pleased to provide you with detailed advice on this ESL5067. P.S.: Our forklift master workshop specializes in repair, maintenance, overhaul, and custom builds for forklifts from 8 tons. You are welcome to have us offer your vehicle for consignment sale as well. Fork positioner, Fork positioner opening range: 335 / 3,740 mm Heater, full cab, full free lift.

Condition: excellent (used), Year of construction: 1993, Catalog number 7706 TECHNICAL DATA - Maximum workpiece width: 220 mm - Maximum workpiece height: 120 mm – 5 spindles: 1) Bottom horizontal: 220 mm, 4 kW 2) Right vertical: 120 mm 3) Left vertical: 120 mm; both 2 and 3 are 7.5 kW 4) Top horizontal: 220 mm, 5.5 kW 5) Bottom horizontal: 220 mm, 4 kW - All spindles adjustable up/down, right/left - Spindle diameter: 40 mm - Pneumatic feed rollers - 4 powered, toothed feed rollers from above including 1 double roller - Top driven outfeed roller, smooth rubber - Bottom driven outfeed roller, rubber - Feed on drive shafts (Cardan shafts) - Stepless feed speed adjustment: 6–36 m/min - Feed motor: 2.2 kW - Lifting motor: 0.25 kW - With brake - Electric thickness adjustment - Central table lubrication - Infeed table length: 1970 mm - Extraction port diameter: 4x120 mm, 140 mm - Dimensions (L x W x H): 3450 x 1600 x 1450 mm - Weight: 1112 kg Net price: 44,900 PLN Chjdpfxew Edhis Aacjd Net price: 10,690 EUR (based on the exchange rate of 4.2 EUR) (Prices may vary depending on market fluctuations)

Condition: used, functionality: fully functional, Year of construction: 2012, operating hours: 6,073 h, load capacity: 5,000 kg, lifting height: 7,550 mm, free lift: 2,660 mm, fuel type: electric, mast type: triplex, construction height: 3,720 mm, fork carriage width: 4,150 mm, fork length: 1,390 mm, empty load weight: 10,510 kg, total length: 3,680 mm, drive type: Elektro, construction width: 2,380 mm, Four-way Side Loader Load Centre: 700 Fork Width: 250 mm Fork Thickness: 50 mm Mast Type: Triplex Condition: Ready for operation and fully functional Technical Condition: Very good Front Tyre Type: Solid tyres Front Tyre Size: 413/178-285.8 Rear Tyre Type: Solid tyres Chodpfx Aoxg Uqhsacsd Rear Tyre Size: 457x229 Battery Voltage: 80V Battery Capacity: 774Ah Battery Year: 2012 Description: In addition to this Hubtex model, we have approximately 200 heavy-duty forklifts, compact forklifts, counterbalance forklifts & side loaders in stock at our Hamburg and Gdansk locations. Visit our website - sago-online. Leasing & financing at favourable conditions are always possible. We are also happy to purchase your used equipment outright, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be pleased to advise you in detail on this MD50. P.S.: Our master forklift workshop specialises in repair, maintenance, refurbishment and custom solutions for forklifts from 8 tons upwards. We are also happy to offer your vehicle on consignment sale in our facility. Fork Positioner, Fork Positioner Opening Range: 590 / 4,100 mm Full free lift, Platform height: 510 mm

Condition: excellent (used), Catalogue number 6765 TECHNICAL DATA - max. working width of element: 230 mm - max. working height of element: 160 mm Number of spindles: 4: 1) lower horizontal, 230 mm, 5.5 kW 2) right vertical, 160 mm, 5.5 kW 3) left vertical, 160 mm – electrically adjustable left/right from the control panel, 5.5 kW 4) upper horizontal, 230 mm – electrically adjustable up/down from the control panel, 7.5 kW - all spindles adjustable up/down, left/right - spindle diameter: 40 mm from the top: - driven infeed rollers, geared, 6 pcs (incl. 2 double rollers) - driven outfeed rollers, rubber-coated, 2 pcs from below: - infeed roller, driven, geared, metallic, swiveling in the lower table - outfeed roller, driven, metallic, smooth - pneumatically adjustable rollers - length of infeed table (with pneumatic feeder): 3390 mm - possible operation without activating the pneumatic feeder; the table is height-adjustable - central lubrication - electric thickness adjustment - variable feed speed adjustment - feed via cardan shafts - feed motor: 4 kW - enclosed in cabin - extraction port diameter: 4 x 120 mm - dimensions (L x W x H): 7000 x 1950 x 1700 mm - weight: approx. 3000 kg - suitable for wet and dry wood - pneumatic feeder on the infeed table - second-hand planer, in very good condition Chodoin Elpspfx Aacod Net price: 89,900 PLN Net price: 21,400 EUR Net price calculated at exchange rate 4.2 PLN/EUR (price may change in case of significant exchange rate fluctuations)

Condition: excellent (used), Catalogue number 6338 TECHNICAL DATA - Maximum working width: 230 mm - Maximum working height: 160 mm 7 spindles: 1) Bottom horizontal, 230 mm, 5.5 kW Chjdpfxohp N R Ie Aaced 2) Right vertical, 160 mm, 5.5 kW 3) Left vertical, 160 mm, 5.5 kW 4) Top horizontal, 230 mm, 7.5 kW 5) Top horizontal, 230 mm, 7.5 kW 6) Bottom horizontal, 230 mm, 7.5 kW 7) Universal 360°, 230 mm, 7.5 kW - All spindles adjustable up/down and right/left - Spindle diameter: 40 mm - All spindles equipped with brake - Spindle speed: 6,000 rpm From above: - 6 geared, steel infeed rollers including 2 double rollers - 4 rubber outfeed rollers including 1 double roller - 3 outfeed pressure rollers From below: - Side pressure roller at infeed - Geared, swiveling, steel infeed roller in lower table - 3 smooth steel feed rollers - Pneumatically adjustable rollers - Length of infeed table: 1,190 mm - Centralized table lubrication - Electric planer thickness adjustment - Lifting motor: 0.56 kW - Stepless feed rate adjustment via inverter: 6–24 m/min - Feed motor: 3.7 kW - Cardan shaft roller feed - Enclosed in cabin - Extraction port diameter: 7 x 125 mm - Dimensions (L x W x H): 5,100 x 2,070 x 1,900 mm - Approximate weight: 5,000 kg ADVANTAGES - 7 heads - Universal spindle - Ideal for both wet and dry wood - Spindles equipped with brakes - Full technical documentation (DTR) - Used planer, in very good condition Net price: 149,900 PLN Net price: 35,690 EUR at an exchange rate of 4.2 EUR (Prices may vary with larger fluctuations)

Condition: excellent (used), CATALOG NUMBER 7556 Chodpsvyzn Rofx Aacod Technical specifications: - Min / max working width: 20 / 240 mm - Min / max working height: 8 / 160 mm - Number of spindles: 4 1) Bottom horizontal, 240 mm, 5.5 kW 2) Right vertical, 160 mm, 5.5 kW 3) Left vertical, 160 mm, 5.5 kW 4) Top horizontal, 240 mm, 7.5 kW - All heads adjustable vertically and horizontally - Spindle diameter: 40 mm – Top: - 6 powered infeed rollers, toothed (including 2 double rollers) - 2 powered outfeed rollers, smooth rubber – Bottom: - Lateral pressure before and after the roller on the lower table - Powered infeed toothed roller, swiveling, on the lower table before the first spindle - 2 pneumatic lateral pressure units - Powered outfeed roller, smooth metal - All rollers pneumatically loaded - Infeed table length: 2180 mm - Table adjustable vertically - Centralized lubrication - Electric thickness adjustment - Lifting motor: 0.75 kW - Stepless feed speed adjustment via inverter: 6–30 m/min - Feed motor: 3 kW - Feed through Cardan shafts - Enclosed in a cabin + - Extraction outlet diameter: 4 x 150 mm - Dimensions (L x W x H): 3750 x 1750 x 1800 mm - Weight: 3300 kg ADVANTAGES – Four-head configuration – Ideal for wet and dry wood – Used machine, excellent condition Net price: 75,900 PLN Net price: 18,070 EUR (based on 4.2 EUR exchange rate) (Prices may change with significant exchange rate fluctuations)

Condition: excellent (used), Catalogue number 7288 TECHNICAL DATA - Max. workpiece width: 230 mm - Max. workpiece height: 130 mm 6 spindles: 1) Bottom horizontal: 230 mm, 7.5 kW 2) Right vertical: 130 mm 3) Left vertical: 130 mm; (spindle 2 and 3): 15 kW Spindle 3 with electric right/left adjustment 4) Top horizontal: 230 mm, 11 kW 4th spindle with electric up/down adjustment 5) Bottom horizontal: 230 mm, 7.5 kW 6) Universal: 230 mm, 360° adjustable, 11 kW - All spindles adjustable up/down, right/left - All spindles equipped with brake - Spindle diameter: 40 mm - Top infeed: 4 steel, toothed, powered rollers (incl. 2 double rollers) - Top outfeed: 3 smooth, rubber, powered rollers (incl. 2 double rollers) - Bottom outfeed: 2 rubber, powered rollers Chedpfxsrwmp Uo Aacjd - Bottom side pressure: 3 units - Variable feed speed adjustment - Pneumatic feed rollers - Feed motor: 3 kW - Electric adjustment of planing thickness - Body lifting motor: 0.37 kW - Infeed table length: 2,480 mm - Enclosed in safety cabin - Centralised table lubrication - Extraction port diameters: 130 mm, 140 mm, 4x125 mm - Dimensions (L/W/H): 4,960 x 1,760 x 1,700 mm - Weight: approx. 3,500 kg ADVANTAGES – Manufactured in Italy – 6-head configuration – Machine is in original paint (not repainted) – All spindles equipped with brake – Last spindle is universal – Used planer, in very good condition Original photos Net price: 54,900 PLN Net price: 13,070 EUR (based on 4.2 EUR exchange rate) (Prices may change due to exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 6674 TECHNICAL SPECIFICATIONS - Max planing width: 150 mm - Max planing height: 130 mm 7 spindles: 1) bottom horizontal, 150 mm, 3 kW 2) right vertical, 130 mm, 3 kW 3) left vertical, 130 mm, 4 kW 4) top horizontal, 150 mm, 4 kW 5) bottom horizontal, 150 mm, 3 kW 6) right vertical, 130 mm, 4 kW - Spindle diameter: 35 mm (all spindles) - All spindles adjustable up/down and right/left - 4 driven toothed feed rollers from above - 4 top rubber outfeed feed rollers Chodpfxeiba Evs Aacjd - 2 top pressure rollers - Electric planing thickness adjustment: 0.25 kW - Infeed table length: 1970 mm - Central table lubrication - Stepless feed speed adjustment - Feed motor: 1.5 kW - Extraction port diameters: 6x120 mm - Dimensions (LxWxH): 4000x1300x1600 mm - Weight: approx. 3000 kg – German manufacture – 6-head machine – Used moulder/planer in very good condition Net price: 36,900 PLN Net price: 8,790 EUR Net price based on 4.2 PLN/EUR exchange rate (Significant currency fluctuations may cause price adjustments)

Condition: excellent (used), CATALOG NUMBER 6950 TECHNICAL DATA - Maximum workpiece width: 220 mm Cedpolikzfofx Aacohd - Maximum workpiece height: 130 mm – 4 spindles: 1) Horizontal bottom, 220 mm, 5.5 kW 2) Vertical right, 130 mm 3) Vertical left, 130 mm; (spindles 2 and 3) 5.5 kW 4) Horizontal top, 220 mm, 5.5 kW - 4 electrically adjustable spindles (up/down) - All spindles adjustable up/down, right/left - Spindle diameter: 40 mm - 4 upper infeed drive rollers, gear-driven, including 1 double roller - 1 double upper outfeed drive roller, rubber-coated - Lower outfeed drive roller, rubber-coated - Feed via Cardan shaft rollers - Infinitely variable feed speed: 6–22 m/min - Feed motor: 2.2 kW - Lifting motor: 0.55 kW - Electric planing thickness adjustment - Infeed table length: 1970 mm - Central lubrication system - Extraction port diameter: 3x120 mm, 140 mm - Enclosed in cabin - Dimensions (LxWxH): 3350 x 1400 x 1400 mm - Weight: 1700 kg – German-made – Unpainted – Used planer, very good condition Net price: 38,900 PLN Net price: 9,260 EUR Net price calculated at exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER 7134 TECHNICAL DATA - Max. planing width: 500 mm - Max. planing height: 190 mm Top section: - Anti-kickback fingers - Pulling feed roller, sequential - 2 rows of pressure rollers - Pull-in feed roller, sequential - 500 mm planing cutterhead, 4-knife, 7.5 kW motor - Pressure rollers - Smooth, pulling outfeed roller - Outfeed pressure roller Cjdpfxopmtcks Aacshd Bottom section: - Adjustable infeed table + pressure roller - Smooth sliding roller - 500 mm planing cutterhead, 4-knife, 5.5 kW motor - 2 smooth sliding rollers - Side pressure roller Rear section: - Side spindles: 1) Right vertical 140 mm, 4 kW 2) Left vertical 140 mm, 4 kW - Spindle diameter: 40 mm - Spindles adjustable up/down, right/left - Stepless feed speed adjustment: 8–30 m/min - Electric table lifting - Extraction port diameters: 2x145 mm, 2x160 mm - Dimensions (L/W/H): 2050 x 1700 x 1700 mm - Weight: 2100 kg FEATURES – Ideal for flooring production – Electric table lifting – Czech manufacture – Used planer, in very good condition Net price: 37,900 PLN Net price: 9,020 EUR (based on EUR rate 4.2) (Prices may change with significant fluctuations)

Condition: excellent (used), CATALOG NUMBER 7343 Cedpstx Tmmjfx Aacjhd TECHNICAL DATA - Maximum workpiece width: 180 mm - Maximum workpiece height: 120 mm 4 spindles: 1) Bottom horizontal: 180 mm, 4 kW 2) Right vertical: 120 mm, 4 kW 3) Left vertical: 120 mm, 4 kW 4) Top horizontal: 180 mm, 5.5 kW - Spindle diameter: 40 mm - All heads adjustable up/down, right/left - Feed-in pressure roller - Top feed: 6 knurled feed-in rollers (including 1 double) - Top feed: double outfeed rubber roller - Bottom feed: wide metal knurled feed-in roller - Bottom feed: smooth metal outfeed roller - Feed motor power: 2.2 kW - Feed via Cardan shaft - Stepless feed speed adjustment - Electric thickness setting - Lifting motor power: 0.75 kW - Infeed table length: 1580 mm - Extraction port diameter: 4 x 120 mm - Dimensions (LxWxH): 3040 x 1500 x 1700 mm - Weight: approx. 2800 kg ADVANTAGES – Ideal for wet and dry wood – Not repainted – With 4 cutterheads – Supplied with DTR + CE documentation – Used planer/moulder, in very good condition Net price: 46,900 PLN Net price: 11,160 EUR (based on 4.2 EUR exchange rate) (Prices subject to change depending on exchange rate fluctuations)

Condition: excellent (used), Catalogue number 6393 TECHNICAL DATA - Maximum workpiece width: 200 mm - Maximum workpiece height: 150 mm - Number of spindles: 4: 1) Bottom horizontal, 200 mm, 5.5 kW 2) Right vertical, 150 mm, 4 kW 3) Left vertical, 150 mm, 4 kW 4) Top horizontal, 200 mm, 5.5 kW - All cutterheads adjustable vertically and horizontally - Spindle diameter: 40 mm - Spindle speed: 6,000 rpm From above: - 6 feed-in traction rollers, toothed (including 2 double) - 1 feed-out traction roller, rubber-coated From below: - Feed-in drive roller, toothed, steering, integrated in lower table - 3 side pressure rollers - Feed-out traction roller, metal, smooth - All rollers pneumatically loaded - Infeed table length: 2,130 mm - Height-adjustable table - Centralized lubrication system Cedpfjhh Sflsx Aacjhd - Electric adjustment of planing thickness - Lift motor: 1.1 kW - Stepless feed speed control via inverter - Feed drive motor: 3 kW - Feed via Cardan shafts - Fully enclosed in cabin - Extraction port diameters: 4 x 130 mm - Dimensions (LxWxH): 3,550 x 1,750 x 1,800 mm - Approx. weight: 3,000 kg ADVANTAGES – Equipped with 4 cutterheads – Ideal for wet and dry timber – DTR operation and maintenance manual included – Used machine, very good condition Net price: 65,900 PLN Net price: 15,690 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER 7221 TECHNICAL SPECIFICATIONS - min / max working width: 45 / 150 mm - min / max working height: 15 / 50 mm 3 spindles: 1) lower horizontal 11 kW 2) upper horizontal 22 kW (7000 rpm) 3) lower horizontal 5.5 kW spindle diameter: 40 mm - spindles 1 and 3 adjustable manually up/down, left/right - spindle 2 adjustable manually left/right - spindle 2 adjustable electrically up/down - spindles 2 and 3 equipped with brakes Top section: - 3 infeed, driven, metal toothed rollers - 1 outfeed, double, driven, rubber roller Bottom section: - infeed pressure device - grooved table - driven, smooth metal roller - electric thickness adjustment - variable feed speed: 6-24 m/min - feed motor: 3 kW - feed via Cardan shafts - infeed table length: 1970 mm - automatic table lubrication system - extraction port diameter: 1x150 mm, 2x140 mm - dimensions (LxWxH): 3070x2000x1800 mm - weight: 2000 kg ADVANTAGES – Made in Germany – With 3 heads – For processing lamellas – Grooved table – Complete set of cutter heads included – Unpainted – Very good condition Chedpfeq Nnpfjx Aacsd – Used planer Net price: 125,900 PLN Net price: 29,980 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In the event of significant exchange rate fluctuations, the price may be subject to change)