Used Furnace Laboratory for sale (2,124)

Condition: excellent (used), Manufacturer / Type: Nabertherm L 08/14 with programmable C19 controller Configuration: horizontal Rated temperature: up to 1400 °C (continuous operation permissible temperature likely lower) Chamber volume: 8 liters Description: • Usable dimensions (W×H×D): approx. 15 × 15 × 30 cm • External dimensions (W×H×D): approx. 61 × 140 × 71 cm • Weight: approx. 100 kg • Maximum power consumption: 3.3 kW • Plug: 380 V CEE (three-phase, 16 A) Scope of delivery: Furnace only, no additional accessories – see original photos Condition: Used, in good technical and visual condition. The heating rod holder on the right side is slightly damaged, but the unit is fully operational. Shipping: Freight forwarding or personal pickup Additional information: • Fast heat-up times (in test: approx. 30 minutes to 1000 °C) Tsdpfoxr S Rpsx Adljf • Labotherm, Tmax 1400 °C • High-quality Al₂O₃ fiber insulation for rapid heating • Special heating wire on ceramic oxide support tubes allows free heat radiation (→ long service life) • Heating from both sides • Low external casing temperature • Integrated control system with electronic safety interlock • Programmable control via C19 controller

Year of construction: 1984, condition: used, max. temperature 1.050 Grad size of opening 380 x 230 mm depth of chamber 680 mm volume 60 L voltage 380 V total power requirement 19,0 kW weight of the machine ca. 540 kg dimensions of the machine ca. 1,15 x 1,35 x 1,65 m - Serial-No.: 13817 Todpfx Aji Db Dbodlef

Condition: good (used), Year of construction: 2002, ESG: 6 - 19 mm, TVG: 4 - 12 mm, Size that can be covered: 2800 x 6000 mm, Power: Heating: 1060 kW, Motors: 235 kW, Total power: 1295 kW. Tjdpfjrck Hwex Adljf

Year of construction: 2002, condition: good (used), functionality: fully functional, Temperature max: 700° Celcius Opening LxH: 1.500 x 30 mm Country of origin: The Netherlands Electric power: 14 kW Machine LxWxH: 2.000 x 1.000 x 1.700 mm Machine weight: 1500 kg Tsdpfx Adjwi Ry Holef

Condition: like new (used), functionality: fully functional, Year of construction: 2018, MIELE laboratory dishwasher with AD water connection, liquid dosing, DryPlus & conductivity monitoring • Capacity/batch e.g. 128 laboratory bottles • Safety – rinsing pressure, spray arm and conductivity monitoring • 72% less water consumption • Efficient hot air drying – DryPlus FURTHER TECHNICAL DATA PLEASE REFER TO THE ATTACHED PDF Tsdpfsv Aknrsx Adlof

Year of construction: 1969, condition: used, Technical data: Power: 2.2 kW Connection: 220 V Dimensions: Frame (WxDxH), approx.: 310 cx 355 x 755 mm Oven (WxDxH), approx.: 370 x 550 x 400 mm Todpfju Atiisx Adlsf Oven interior (WxDxH), approx.: 180 x 23.5 x 120 mm Equipment: - Various tongs

Condition: new, Year of construction: 2025, functionality: fully functional, nominal heat output: 930 kW (1,264.45 HP), temperature: 1,000 °C, type of input current: three-phase, input voltage: 400 V, warranty duration: 12 months, Equipment: documentation/manual, Car bottom combustion furnace (powered by natural gas or LPG) model ST/BT for heat treatments of ferrous metals such as cast iron or steels at temperatures up to 1000°C, complete with one removable trolley and an automatic control and command panel. Furnace suitable for quenching, tempering, hardening, annealing, normalizing, stress relieving, preheating, etc. CE certification declaration 12-month warranty Tjdpfx Adjw Ifl Tolef Brand new machine, made in Italy Specifications and attached photos are for reference only; custom-built machines tailored to each specific thermal process are available.

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, number of chambers: 1, workpiece length (max.): 4,200 mm, workpiece width (max.): 2,500 mm, transport length: 5,500 mm, TECHNICAL DETAILS Workpiece Maximum glass dimensions: 4,200 mm x 2,500 mm Chamber Dimensions Chamber volume: approx. 21 m³ Chamber height: 3,100 mm Chamber length: 4,400 mm Chamber width: 1,600 mm MACHINE DETAILS Control system: Siemens SIMATIC Door Dimensions Clear door height: 3,000 mm Clear door width: 1,600 mm Space Requirements Tsdjw Slcmepfx Adljf Footprint (L x W x H): 4,700 x 3,000 x 4,200 mm Base width: 2,700 mm Unit transport length: 5,500 mm Insulation Ceiling insulation: >170 mm insulating material Side panels and door insulation: >120 mm insulating material Floor insulation: >50 mm insulating material Heating: electric Temperature control: optimized EQUIPMENT Optimized heating and fan performance Tamper-proof data recorder with industrial USB interface IT interface and order allocation User-friendly display with energy consumption indicator

Condition: excellent (used), Stock number: 2896 Manufacturer: Heraeus Year of manufacture: Machine number: 7406922 Type / Model: MR 260 Tjdpfxjurf H Rs Adlef Interior width x height:: 260 x 160 mm Interior depth: 500 mm Temperature: up to 1000 °C Connection: Accessories/equipment: Condition: very good Weight: 0.15 t Dimensions: 1,100 x 700 x 1,600 mm

Year of construction: 2025, condition: as good as new (ex-display), SERVOCUT 302-MA Automatic abrasive cutting machine - programmable with 7" touch screen operating panel with SIEMENS-PLC control Todpfx Adjcw Ipaelof - automatic moving table + manual chop cut (other types available) - cutting machine for a variety of different programmable cutting processes - programming of cutting parameters via LCD display - precise and motorized positioning of the sample in X - Y and Z axis - integrated moving table control with force-dependent adjustable infeed speed - variable cutting force, mode for pulse cut, overload protection of the drive motor - compact engine 2,800 rpm cutting disc speed - electronic braking system - cutting capacity up to 110 mm solid material (with cut-off wheels Ø 300 mm) - double, split (left/right) stainless steel T-slot table - floor assembly made of solid die-cast aluminum - incl. 80 l circulation cooling system complete with connection hoses - delivery ready for operation (without clamping devices) - power supply 400 V / 50 Hz, 3 phases with neutral 16 A back-up fuse - delivery including test equipment Consumables consisting of: * Assortment of 20 cutting discs with 300 mm diameter * 5 litre METCOOL coolant liquid

Condition: used, Year of construction: 1997, functionality: fully functional, type of input current: AC, Glass tempering furnace EFCO, 1500x3000 1500 x 3000 mm, Right – Left Tsdpoxguqnefx Adlof Year: 1997. 415 V, 50 Hz, 3 Ph. In good technical condition. Disassembled and ready for loading.

Condition: ready for operation (used), Beckmann coulter SX4750 Rotor Max Rpm 3750 680 g Good working condition. Please check out our other listings as well. Tjdoxtagbepfx Adlsf

Condition: used, Programmable AC power source voltage regulator Laboratory power supply, power supply, Programmable AC Power Source CHROMA Type 6415 : 641500000 363 Year of manufacture approx. 2000 Tedpfx Aedz Srbedlef Input values - Input voltage: 190 ~ 250 Volt AC Input frequency: 47-63 Hz Input current: max. 12 Amp. Output values - Output voltage range: 0 to 150 VAC / 0 to 300 VAC Max. output current: 15 A / 7.5 A Output power: 1500 VA Efficiency 80% Number of output phases: 1 Accuracy: 0.2% + 0.2% of F.S. Resolution: 0.1V Distortion: 0.5% for frequencies 45 - 500 Hz 1.0% for frequencies >500 - 1 kHz Line regulation: 0.1% Load regulation 0.1% Output frequency: 45 - 1000 Hz. Accuracy: 0.1 Resolution: 0.1Hz Measurement: V, F, I, P, PF, CF MAIN FEATURES: - High measurement accuracy for RMS voltage, RMS current, active power, frequency, power factor and current crest factor - Built-in power factor correction circuit - Programmable current limit - Integrated output isolation relays - EEPROM memory for user-defined voltage and frequency combination for immediate recall at any time - Optional GPIB, RS-232 and analog programming interface - Overvoltage, undervoltage, overpower, overcurrent, overtemperature and short circuit protection - Temperature controlled fan speed - Self-test when switched on Additional connections: - 9-pin D-Sub (Trigger In, AC On, etc.) - 25-pin D-Sub (printer) - BNC (EXT VREF) - 9-pin D-Sub (RS-232C interface) - 24-pin Centronic (GPIB) - 25-pin D-Sub (System I/O) - 3x BNC (Sync / Clock / VREF) - Manual in PDF format Space required H x W x D 221.5 x 425 x 567 mm Weight: 23 kg good condition 2 pieces available, price per piece

Condition: used, functionality: unexamined, machine/vehicle number: LABO-100, Used Kirsch LABO-100 laboratory refrigerator. Tjdpsw H Nvbefx Adljf Manufacturer: Kirsch Model: Labo 100 Voltage: 220 volt, 50/60 Hz • Capacity: 95 Liters • Internal dimensions: 440x430x470 mm • Temperature range: +2 to +20 degrees

Condition: excellent (used), Manufacturer: Privileg Type: Appliance no: Capacity: approx. 300 l Internal dimensions: 6 compartments 480 x 350 x 200 mm Equipment: 6 safety glass shelves Connection: Tedpfxeuid Rus Adlsf Temperature: up to 4°C Weight: Dimensions: 600 x 600 x 1,600 mm Condition: good Equipment: Interior antibacterial Refined, super eco - saving system

Year of construction: 2008, condition: not inspected (used), functionality: unexamined, power: 0.08 kW (0.11 HP), overall weight: 300 kg, total length: 1,170 mm, total width: 600 mm, total height: 700 mm, machine/vehicle number: 2-453-004192, No minimum price – guaranteed sale to the highest bidder! Loading can take place on 08.09.2025 or 09.09.2025! Tsdpew Hrx Sofx Adlof MACHINE DETAILS Electrical data Voltage: 400 V Current: 16 A Power: 80 W Dimensions & weight Dimensions (L x W x H): 1170 x 600 x 700 mm Weight: 300 kg

Condition: used, Year of construction: 2007, 2 (two) chambers Tedpfx Aoiqn Aiedljf Max. size: 2580 X 4200mm Min. size: 100 X 200 mm Thicknes: 4-19mm LowE The line is currently dismantled and stored in our warehouse as shown on the pictures.

Year of construction: 2020, condition: like new (used), functionality: fully functional, Fully automatic sintering continuous furnace system Manufacturer: Sarnes Model: 600-G/CQI-9 Year of manufacture: 2020 (commissioned 2021) Programmable, with online diagnostic system. Fuel: natural gas Hydrogen + nitrogen (N2+H2) operation integrated Todpfxjxfcdye Adlef The system has seen very little use and is in excellent condition. Offer / Quotation Date: 18.1.19 620 mm belt width, gas heated, N2/H2 operation, LED dewaxing zone, rapid cooling section (Pos 2), flameless discharge and ceramic muffle, Heating: low NOx RS Rekudrall burners, SiSiC burner tubes, installed heating capacity 320 kW in 8 zones, dual thermocouples, 100 mm usable height. LED 3 dewaxing zones ("low energy dewaxing" – utilization of chemically bound energy of the waxes and improved burnout conditions especially for heavy PM parts (>0.9 kg)). Dimensions: - Infeed table 2 m (target-actual belt speed compensation) - LED3 dewaxing zone: 1.5 m - Sintering zone length 7.5 m - Rapid cooling length 1 m - Convective cooling zone length 2 x 4 m - Flameless discharge with air shower 2 m - Outfeed table 2.7 m - Total system length 23.7 m - Width 2.3 m Connection ratings: Heating: installed power 320 kW Natural gas: 25 m³/h (80 mbar) N2: 45-65 m³/h (max. 80 mbar) H2: 0.5 - 15 m³/h (80 mbar) Cooling water: 3-5 m³/h (non-pressurized; temp.

Condition: used, Programmable AC power source voltage regulator Laboratory Power Supply, Power Supply, Programmable AC Power Source CHROMA Type 6415 : 64150296 Year of manufacture approx. 2000 Input values - Input voltage: 190 ~ 250 Volt AC Input frequency: 47-63 Hz Input current: max. 12 Amp. Output values- Output voltage range: 0 to 150 VAC / 0 to 300 VAC Max. Output current: 15 A / 7.5 A Output power: 1500 VA Efficiency 80% Number of output phases: 1 Accuracy: 0.2% + 0.2% of F.S. Resolution: 0.1V Distortion: 0.5% for frequencies 45 - 500 Hz 1.0% for frequencies >500 - 1 kHz Tedpfx Asdz Sraedljf Line regulation: 0.1% Load regulation 0.1% Output frequency: 45 - 1000 Hz. Accuracy: 0.1 Resolution: 0.1Hz Measurement: V, F, I, P, PF, CF MAIN FUNCTIONS: - High measurement accuracy for RMS voltage, RMS current, active power, frequency, power factor and current crest factor - Built-in power factor correction circuit - Programmable current limiting - Integrated output cut-off relays - EEPROM memory for user-defined voltage and frequency combination for instant recall at any time - Optional GPIB, RS-232 and analog programming interface - Over voltage, under voltage, over power, over current, over temperature and short circuit protection - Temperature-controlled fan speed - Self-test when switching on - Supplied as shown, without additional accessories and connection cable Additional connections: - BNC (EXT VREF) - 9 Pol. D-Sub (RS-232C interface) - 24 Pol. Centronic (GPIB) Space requirement H x W x D 221.5 x 425 x 567 mm Weight: 23 kg good condition

Condition: used, Laboratory power supply -0-1 A Tjdsb A N Sfepfx Adlof -0-20 V -Weight: 5 kg

Condition: used, Laboratory fume cupboard, fume cupboard, suction -Connection: Ø 50 mm -Filter: 270 x 270 mm -Dimensions: 700/390/H370 mm Tedpfx Aob Uhkgsdlsf -Weight: 31 kg

Condition: used, Laboratory power supply, power supply, voltage generator, laboratory power supply Tjdpfx Ajcqp Hhsdljf -Input: 230 volts -Output: 100-415 volts -Dimensions: 320/170/H130 mm -Weight: 3.2 kg

Condition: used, Laboratory power supply, power supply, voltage generator, laboratory power supply Todpfx Adeb Nkt Dslof -Input: 230 volts AC -Output: 0-30 volts DC -Dimensions: 150/240/H130 mm -Weight: 4.5 kg

Condition: used, Laboratory fume cupboard, fume cupboard, suction Tsdob Uhkhspfx Adlof -Input: 230 volts AC -Dimensions: 1200/875/H1255 mm -Weight: 176 kg

Condition: used, Laboratory power supply, power supply, voltage generator, laboratory power supply -Input: 230 volts AC Tjdsb S Htmjpfx Adlsf -Output: 24 V 2.5 A -Dimensions: 160/270/H110 mm -Weight: 5.5 kg