Used Furnace Laboratory for sale (2,122)

Condition: used, Laboratory fume cupboard, fume cupboard, suction Bedsb Uhkhspfx Aczjlr -Input: 230 volts AC -Dimensions: 1200/875/H1255 mm -Weight: 176 kg

Year of construction: 2020, condition: like new (used), functionality: fully functional, Fully automatic sintering continuous furnace system Manufacturer: Sarnes Model: 600-G/CQI-9 Year of manufacture: 2020 (commissioned 2021) Programmable, with online diagnostic system. Fuel: natural gas Hydrogen + nitrogen (N2+H2) operation integrated The system has seen very little use and is in excellent condition. Bljdpfxjxfcdyj Aczjr Offer / Quotation Date: 18.1.19 620 mm belt width, gas heated, N2/H2 operation, LED dewaxing zone, rapid cooling section (Pos 2), flameless discharge and ceramic muffle, Heating: low NOx RS Rekudrall burners, SiSiC burner tubes, installed heating capacity 320 kW in 8 zones, dual thermocouples, 100 mm usable height. LED 3 dewaxing zones ("low energy dewaxing" – utilization of chemically bound energy of the waxes and improved burnout conditions especially for heavy PM parts (>0.9 kg)). Dimensions: - Infeed table 2 m (target-actual belt speed compensation) - LED3 dewaxing zone: 1.5 m - Sintering zone length 7.5 m - Rapid cooling length 1 m - Convective cooling zone length 2 x 4 m - Flameless discharge with air shower 2 m - Outfeed table 2.7 m - Total system length 23.7 m - Width 2.3 m Connection ratings: Heating: installed power 320 kW Natural gas: 25 m³/h (80 mbar) N2: 45-65 m³/h (max. 80 mbar) H2: 0.5 - 15 m³/h (80 mbar) Cooling water: 3-5 m³/h (non-pressurized; temp.

Condition: good (used), KEN 311-OS Laboratory Dishwasher Laboratory dishwashing machine with high capacity The flexible machine for laboratories with high washing needs The KEN 311-OS covers the quality washing needs of laboratories Advantages Washing of instruments in up to 2 levels at once High capacity User-friendly and ergonomically correct front operation Front display with plain text Low noise level Low energy and chemical consumption for the benefit of environment and economy Minimal maintenance and service Specifications: Height 140 cm. Width 60 cm. Depth 64 cm. Electrical connection 400 Volt 3N 50 Hz Power 10,1 kW Condition: This unit was removed in working condition due to a site closure and has been stored since. It appears to be in very good condition. Unfortunately, we do not have the knowledge or instrumentation to test the unit further and Therefore, this unit is being sold as is, in the condition it is pictured here. Blodpfxjiuz Dbs Aczor If you would like to test or inspect this unit prior to purchase, please contact us anytime to schedule an appointment. More items - new and used - can be found in our store! International shipping costs on request!

Condition: ready for operation (used), functionality: fully functional, Pamasol semi-automatic machines Crimper 1" aerosol valve closing machine 1" valve extractor for removing the valve from the can Burst pressure tester P325 electronic with computer visualization Blodpsxiwadofx Aczsr Measuring device Z18612, control gauge, Kröplin C-series

Condition: used, Year of construction: 2007, 2 (two) chambers Bsdpfoiqn Aiex Aczslr Max. size: 2580 X 4200mm Min. size: 100 X 200 mm Thicknes: 4-19mm LowE The line is currently dismantled and stored in our warehouse as shown on the pictures.

Year of construction: 2015, condition: as good as new (ex-display), machine/vehicle number: 2245, stock-No.:2245 1 used Lab Extrusion-pelletizing Batch line, condition like new, equipped with: Extruder single-screw AlphaTec type AE-S 25-30 single-screw Ø 25 mm – 30 L/D Extruder motor 3 kW- AC, screw speed range up to 130 rpm frequency controlled cylinder air cooled, elec. heating 2 x 3 kW 1x venting athm. port 1x manual screen-pack-changer Ø 42 mm 1x strand-die-head 1x water bath 1.000 x 150 mm 1x strand-pelletizer, intake width 30 mm, motor 1,1 kW – AC control board with PID, melt pressure, speed by frequency converter Trial-run shortly possible, date by appointment Bljdpfx Ajd Sg Hrjczor Mire extruders ex our machine-stock Wuppertal Germany available.

Condition: used, Laboratory power supply, power supply, voltage generator, laboratory power supply Bsdpfjb S Htmjx Aczjlr -Input: 230 volts AC -Output: 24 V 2.5 A -Dimensions: 160/270/H110 mm -Weight: 5.5 kg

Condition: used, Hosokawa Mikropul ACM 2/3 classifier mill used, with suction filter, suction cooler, fan, cyclone, piping, unfortunately the filter is missing Bsdpfxovcmc Ej Aczslr

Condition: good (used), TDK GEN20-120-1P230, TDK-Lambda 19 inch laboratory power supply unit 44 mm housing 0 - 20 V/DC / 0 - 120 A Switched Input voltage range 85 - 265 V/AC Integrated RS-232 / RS-485 interface External analog programming and monitoring Design (general): Rack-mountable Item condition: Used, in perfect condition R11B1_EK More laboratory power supplies - new and used - you can find in our store! International shipping costs on request! Bsdok Uuh Tspfx Aczjlr

Condition: excellent (used), Year of construction: 2021, temperature: 1,000 °C, energy consumption: 10 kWh, Laboratory furnace / Glass tempering furnace Bedpfjxcb Hnex Aczslr Max temperature: 1000°C

Year of construction: 2019, condition: like new (used), Chamber oven EHS (Netherlands) Blsdowun Ifjpfx Aczer temperature: 50 - 150 °C 6 chambers of 1400x800x2400 mm 12 electric heaters, each 3 kW 400V / 63A loading up to 1400 kg per chamber

Year of construction: 2007, condition: repair required (used), functionality: not functional, Belt width: 650 mm, usable height: 220 mm, heated length: 3250 mm. The furnace has 3 heating zones and a heating capacity of 125 kW. The furnace has been stored in a hall for several years, and many components need to be sandblasted and repainted. In addition, the interior of the furnace needs to be relined, and some parts need to be newly manufactured. The furnace can also be completely overhauled by us to meet current technical standards. Bodpfx Acoxdantezjlr

Condition: used, Laboratory fume cupboard, fume cupboard, suction -Connection: Ø 50 mm Bedsb Uhkfspfx Aczslr -Filter: 270 x 270 mm -Dimensions: 700/390/H370 mm -Weight: 32 kg

Year of construction: 2020, condition: like new (used), This selection of laboratory glassware washers and dryers provides flexible solutions to meet the specific needs of small- and medium-size scientific laboratories. Our compact washers and dryers with a minimal footprint are suitable for situations where space is at a premium, while sharing the washing and drying technology of higher-throughput devices, ensuring excellent cleaning results and drying efficiency. Bledsw D S Nxspfx Aczjr

Condition: excellent (used), Mesdan Lab Knitter 294E Single-Cylinder Laboratory Knitting Machine High-precision single-cylinder laboratory knitting machine For the production of tubular knitted fabrics Mechanism for regulating fabric count Automatic oiling system Ergonomic control panel Electronic yarn length meter Variable speed control via potentiometer LED displays for monitoring machine functions Technical details: Dimensions: (LxWxH) approx. 850 x 450 x 1,750 mm Number of needles: 112 pcs Needle gauge: 0.24 mm Counting range for filaments: 400 ... 2,000 dtex Counting range for spun yarn: 8 ... 12 nne Supply voltage: 230 V Rated current: 1100 W Blsdpfx Acouuh Hxjzer Frequency: 50 Hz Weight: approx. 130 kg Product video More Find items – new and used – in our shop! International shipping costs upon request!

Year of construction: 2006, condition: good (used), Kiln Superturbo, Pulsar model, 180 mc, intermittent type with a firing temperature till 1150°C, and a maximum temperature of 1200°C, equipped with 24 high-speed burners, n° 1 wagon inside the chamber, n° 1 vertical door, reverse induction chimneys, cowl for the expulsion of the smokes, automatic control panel with ATR 313, lining in ceramic fibre, high density, 1260°C type; 4 Heat exchangers for hot combustion air. Bsdpfx Acshgkdqjzolr Thermal Power 3,2 MW Dimensions 7x7x4 meters, capacity of wagoon 80 tons.

Year of construction: 2019, condition: like new (used), functionality: fully functional, - Low temperature (freezer) - Pummel test (adhesion test) - Sourbox (acid resistance test) - Ball drop test - High temperature (furnace) - High humidity test (steam) Blsdpfxjw D Rx So Aczsr

Condition: excellent (used), Mathis THN 10988 Laboratory Thermosol System Blodpfxsu D Ario Aczer Application This padder-dryer combination has proven itself extremely effective in practice. It is used in this form for a wide variety of hot air treatment processes, such as drying, setting, condensing, thermosolizing, etc. This system is used wherever a certain sample size is required, for example, to produce sample collections or similar. THA Dryer If the padder and dryer are to be used separately in addition to continuous operation, the THA dryer should be selected. This unit is equipped with an unwinder at the dryer inlet and an extractor at its outlet. This element determines the fabric speed when operated separately. This offers the advantage of using the padder and dryer independently and simultaneously. The fabric is then transferred to the dryer for drying, setting, condensing, etc. If all of the above-mentioned applications are to be ensured and if the use of pin frames is also desired for stand-alone operation of the dryer, the THN model is preferable. The standard pin frames are suitable for a sample size of max. 50 x 50 cm (larger pin frames available upon request). Lengthwise adjustable frames for woven fabrics or lengthwise and widthwise adjustable material holders for warp-knitted and knitted fabrics, nonwovens, etc., as well as clamp frames for foils and paper, are available. Drying Chamber The drying chamber, including the electrical equipment box and control panel, are mounted on a base frame and bolted together to form a single unit. Good thermal insulation of the dryer is ensured by its double-walled construction with insulation between them. The nozzle array, with a length of 1300 mm, is divided into an upper and lower nozzle compartment. A control flap allows for equal ventilation from top and bottom, or more air from top or bottom. Fan and Heater Intense air circulation is ensured by a powerful fan with a capacity of approximately 900-3500 m³/h, combined with a well-tuned heating output, resulting in optimal evaporation performance. A dual-protection monitoring system reduces maintenance and increases the operational reliability of the dryer. The heating capacity is designed for rapid heating and is automatically reduced once the desired temperature is reached to avoid unnecessary power surges. The temperature is controlled by an electronic measuring and control device in the range of 20-250°C. The fresh air is drawn directly into the recirculation fan via a fan. The desired flow rate can be adjusted using a step switch. Technical Specifications Air velocity approx. 4-12 m/sec Air flow approx. 900-3500 m3/h Temperature range up to 250°C Heating output approx. 27 kW Nozzle area 1300 mm Fabric tension continuously adjustable Fresh air supply adjustable to multiple levels Dimensions: LxWxH = 4800 x 1380 x 1750 mm Purchase price: €86,275 Other items in other sizes – new and used – can be found in our shop! International shipping costs upon request!

Year of construction: 2017, condition: like new (used), functionality: fully functional, Fours H&C 2-level oven max 3460 mm x 2200 mm Year: 2024 Dimensions of glass supports:- Support 1 = 3260mm x 2200mm - Support 2 = 3460mm x 2200mm Approximate external dimensions of the oven: Width: 4300mm Height: 2710mm Depth: 3260mm + rails Maximum temperature: 160°C Power: S-LTD-298 Bsdjvyzh Repfx Aczslr

Condition: excellent (used), Sat B2599A Drawer oven 130 °C If very different products or product parts with equally different annealing times are to be treated independently of each other in the smallest possible space, drawer ovens are the smartest ergonomic solution. Oven data Manufacturer: Sat Model: B 2599 A Type: 1000T Type: Drawer oven Outer dimensions of the furnace width with control cabinet: 2500 mm depth: 1700 mm Height: 2250 mm Usable volume in each drawer width: 1200 mm depth: 850 mm Height: 170 mm (measured 178 mm) Maximum working temperature: 130 °C Bljdpfx Aceim Ik Sszor Temperature homogeneity in the usable volume, when stabilized : +/-3°C at 80°C Frame : The basic structure consists of a non-alloyed steel beam structure, on which the external lighting made of non-alloyed steel is painted in RAL 1013 (pearl white). The furnace inner casing is made of aluminized steel sheet. Insulation between the two furnace housings (inner/outer housing) is provided by 120 mm rock wool. Floor: Same as the furnace walls, with 120 mm thick thermal insulation. Height (from factory floor to I. drawer): 800 mm +/100 mm adjustable by the furnace feet. Openings: 3 drawers, height 250 mm, for a usable load of 120 mm height. Maintenance doors : 2-leaf maintenance door on the back of the oven. Secured by screws. This door allows complete access to the inside of the furnace. Parts handling: The handling of the parts is ensured by 3 drawers (one above the other). Height between each drawer : 250 mm Usable height per drawer : 170 mm, with almost 10 mm reserve. The drawers are smooth and equipped with a locking piece at the bottom of the drawer to reduce heat loss when opening. Each drawer has a useful load capacity of 120 Kg with load distribution over the entire surface. Load peaks up to 240 Kg can be supported. The drawer seals are made of silicone. The locks of each drawer are ensured by electromagnets and controlled by the Siemens system. Timing of the minimum preheating time with a timer per drawer (located in the electrical cabinet). Timing of the maximum preheating time with one timer per drawer (located in the electrical cabinet). One temperature indicator is provided per drawer. These indicators will be located on the front of the furnace, to the left of the drawers. More industrial furnaces in other sizes - new and used - you can find in our store! International shipping costs on request!

Condition: used, Year of construction: 2007, functionality: fully functional, TCGT GTW GW5025ZD series low-e tempering and bending cylindrical shapes, Bsdpfowintwsx Aczolr starting with Radius > 1200 mm. laminating with vacuums bag up to 7000 mm GMR Stock Place

Condition: good (used), KEN 211-OS Laboratory Dishwasher High-capacity laboratory dishwasher The flexible machine for laboratories with high dishwashing requirements The KEN 211-OS meets the need for quality washing in laboratories. Advantages Washing of instruments on up to 2 levels High capacity User-friendly and ergonomically correct front operation Front display with plain text Low noise level Blodpfx Ajiu Urajczsr Low energy and chemical consumption for the benefit of the environment and the economy Minimal maintenance and upkeep Specifications: Height 140 cm Width 60 cm Depth 64 cm Electrical connection 380 volts 3N 50 Hz Power 6.6 kW Item condition: Condition: Used Find more items - new and used - in our online shop! International shipping costs upon request!

Condition: good (used), Roaches 3 bath laboratory glass tinting machine Roaches 3 Bath Lab staining machine 240 V 6500 W 10 A HxWxD= 920 x 1760 x 450 mm Bledpfx Ajuzhudoczor Further articles in other sizes - new and used - can be found in our store! International shipping costs on request!

Condition: good (used), Roaches 3 bath laboratory dyeing machine Roaches 3 bath laboratory dyeing machine 400 V 6600 W 10 A HxWxD= 920 x 1760 x 450 mm Further articles in other sizes - new and used - can be found in our store! Bljdpfx Aeuzhqroczjr International shipping costs on request!

Condition: excellent (used), Mathis Colorstar Junior stainer CJ-R 8606 Laboratory stainer The Colorstar type “CJ” is a 1-position stainer for use in company laboratories and research institutes. The dyeing works according to the winding and packing system in the pull-out process, whereby the dye liquor is passed through the stationary material sample, reversing inside/outside or outside/inside. The built-in vacuum pressure pump creates the desired atmosphere in the treatment room. The “CJ” is particularly suitable for dyeing: - Woven and knitted fabrics on piece beam - Yarns on cross-wound bobbins - Flock, fibers and combed top in the dyeing basket The liquor flow direction is reversible from inside to outside and vice versa, whereby the duration can be adjusted. liquor ratio approx. 1:8 and higher. In addition to the round full-view dyeing station made of borosilicate glass, the apparatus consists of the following components ● Pressure pump for setting a static pressure ● Vacuum pump for deaerating the textile material ● Pressure gauge -1 to + 9 bar for static pressure display of the dye container ● Safety and venting valve ● Swivel HT lid ● Connection for airlock ● Device for filling, flushing and draining ● Integrated cooling (water) and heating (electric) ● Connection socket for: Temperature recording (0 -140 °C) Option also for flow rate (0 - 5 l/min) Differential pressure (0 - 5 bar) pH values (0 -14) Bljdpsu D Dr Rofx Aczsr Purchase price: 67400,- € Further items in other sizes - new and used - can be found in our store! International shipping costs on request!