Used Furnace for sale (751)

Year of construction: 2008, condition: ready for operation (used), Loading chamber dimensions: 280x580mm, loading height: 700mm, max. load: 300kg, with protective housing and documentation, machine was functional until the end, complete maintenance would have to be carried out on the machine, inspection is possible. Hfjdpfx Aeqgfbgoddsb

Condition: excellent (used), Manufacturer / Type: Nabertherm L 08/14 with programmable C19 controller Configuration: horizontal Rated temperature: up to 1400 °C (continuous operation permissible temperature likely lower) Chamber volume: 8 liters Description: • Usable dimensions (W×H×D): approx. 15 × 15 × 30 cm • External dimensions (W×H×D): approx. 61 × 140 × 71 cm • Weight: approx. 100 kg • Maximum power consumption: 3.3 kW • Plug: 380 V CEE (three-phase, 16 A) Scope of delivery: Furnace only, no additional accessories – see original photos Hsdexr S Rpopfx Addsfb Condition: Used, in good technical and visual condition. The heating rod holder on the right side is slightly damaged, but the unit is fully operational. Shipping: Freight forwarding or personal pickup Additional information: • Fast heat-up times (in test: approx. 30 minutes to 1000 °C) • Labotherm, Tmax 1400 °C • High-quality Al₂O₃ fiber insulation for rapid heating • Special heating wire on ceramic oxide support tubes allows free heat radiation (→ long service life) • Heating from both sides • Low external casing temperature • Integrated control system with electronic safety interlock • Programmable control via C19 controller

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: Seriennr.: 4046, Equipment: documentation/manual, Ingot casting belt 600 Zinc melting furnace ZSO 600 / 700 B Hjdpfx Adeu S N Ahsdofb

Year of construction: 1995, condition: ready for operation (used), Product: Electrosinter Year of production: 1995 Air transport: 2x9000m3 Airspace / Capacity: 32m3 Oven opening: 1200 x 1200mm // 80 x 1500mm Heat load: 55-160kW G20 natural gas Air temperature: 170-220 ° C Enclosure size: 2600 x 10300 x 3600mm Electrical cabinets included. It requires electronic and mechanical renovation. Hfjdpfx Adsg R Sh Asdsb Purchase of industrial equipment and machinery. Wide Range of Used Machinery, Industrial Equipment

Condition: used, Year of construction: 2013, operating hours: 6,000 h, functionality: fully functional, the following is included: - Hardening furnace (vacuum oil quenching furnace) - Control cabinet for hardening furnace - Internal water tank with pump units and control box - Control box for water cooling - Internal nitrogen pressure vessel - External platform for cooling unit + connection points for nitrogen batteries (nitrogen battery containers not included, must be rented) Hfsdjwlvhhjpfx Addeb - 7 hardening baskets - Red transport and loading trolley - Parts washing tank for complete baskets with compressed air and drip tray -> System has approx. 6,000 operating hours -> The pictures are up-to-date, only the date on the images is not correct

Condition: new, 7 pieces heating coil new for a melting furnace Fulmina SOU 20E, Technical data: Reversible element with connection ends Ø 10 x 270 mm power: 10.000 Watt Voltage: 220 Volt cold resistance: 4,60 (± 5%) Ohm wire diameter: 4,50 mm coil inner Ø: 29 mm Hjdpsd Tx A Eefx Addsfb leg length: 240 mm Number of legs: 3 x 8 pieces Wire quality: CrFeAl Y 3 heating coils are a complete set in this model (the pictures of the melting furnace serve the representation and show the model in which the heating coils were installed, they fit however also into other models with smaller or higher achievement, it changes only the number of pieces) immediately available from stock

Condition: ready for operation (used), Max. Working temperature: 1120°, heated length: 1000mm, cooling length: 1850mm, channel height: 40mm, conveyor belt width: 110mm, throughput speed: 100-1000mm/min, splitting gas consumption: 1.5-2.5Nm³/h, touch panel: Siemens SIMATIC HMI, length: 5000mm, width: 650mm, height: 1350mm, with integrated ammonia splitter GSP 25 FA, integrated gassing panel, protective gas from ammonia splitter (on-site ammonia supply) + N2 purge gas as required, MSR system with Siemens PLC and touch HMI, atmosphere monitoring, process documentation, on-site inspection is possible. Hsdpfxoq Ttz Eo Addofb

Condition: ready for operation (used), Heraeus MR 260 annealing furnace Internal dimensions: 260mm x 500mm x 160mm ( W x D x H ) Space requirement: 1100mm x 700mm x 1560mm ( L x W x H ) Weight: 150 kg Nominal temperature : 1000°C You are welcome to visit us for an inspection. We will be happy to arrange a cost-effective forwarding agent for you. organize! You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Hsderm R Eyspfx Addsfb Deviations from technical data and errors in the description of the article may occur and are reserved.

Condition: used, TECHNICAL DETAILS Hsdpfxoug U Thj Addefb Quenching tank for stirring oil quenching - power : 0.25 [kW] - voltage : 3 x 380 [V]

Condition: used, Year of construction: 2007, operating hours: 6,383 h, functionality: fully functional, machine/vehicle number: 172, ATV Technologie GmbH Tabletop Quartz Tube Furnace, PEO 601 Model: PEO601 Condition: Used Technical Data: 230/400V AC 50Hz 16A 6.3kW 20-1000°C General Information: Year of manufacture: 2007 Serial number: 172 Operating hours: 6,383 Compact tabletop unit for Plasma Electrolytic Oxidation (PEO) or Micro Arc Oxidation (MAO) Equipment for firing or annealing electronic components Designed for surface treatment processes of aluminum, magnesium, and titanium Produces ceramic coatings on metal surfaces that are particularly hard, corrosion-resistant, and temperature-resistant Programmable firing furnace with precise temperature control Maximum temperature range: up to approx. 1,000°C Heating rate: approx. 100°C/min Processing chamber: diameter approx. 112 mm (4½″), suitable for wafers up to 100 mm Hfedow Dbrvepfx Addeb Application in semiconductor, micro, and nanosystem technology Ideal for research, development, and small series production Microprocessor-based control with adjustable parameters (e.g., voltage, current, time) Integrated control panel with digital displays RS-232 interface for process data monitoring and control Optional connection for process gases (e.g., N₂, H₂) Accessories: Scope of delivery as shown in the photos

Year of construction: 2000, condition: excellent (used), functionality: fully functional, maximum load weight: 7,000 kg, working height: 1,750 mm, The gas nitration vacuum oven is made up of all the steps involved in gas nitration, carburizing, and tempering. Hedpfx Adou T N Efsdofb The machine is in very good condition.

Year of construction: 2006, condition: good (used), Kiln Superturbo, Pulsar model, 180 mc, intermittent type with a firing temperature till 1150°C, and a maximum temperature of 1200°C, equipped with 24 high-speed burners, n° 1 wagon inside the chamber, n° 1 vertical door, reverse induction chimneys, cowl for the expulsion of the smokes, automatic control panel with ATR 313, lining in ceramic fibre, high density, 1260°C type; 4 Heat exchangers for hot combustion air. Hjdpfx Aohgkdqsddjfb Thermal Power 3,2 MW Dimensions 7x7x4 meters, capacity of wagoon 80 tons.

Year of construction: 2010, condition: ready for operation (used), Heated surface: 1600x2600/ 2000x2000mm, nominal power: 120kW, length: 2600mm, width: 2300mm, with control cabinet and conveyor. Hfjdpfxoifpuaj Addsb

Year of construction: 2003, condition: excellent (used), For sale Nabertherm N650/G furnace Furnace in very good condition with shelves and frame. Technical data: Capacity 650 L Power: 26 KW Voltage: 400 V Current intensity: 37.5 A Max temp: 900 degrees Celsius Chamber dimensions width 70 cm Hfsdpfsvrg Slsx Addjb depth 85 cm height 110 cm External dimensions width 112.5 cm depth 155 cm height 192 cm Nabertherm C40 controller

Year of construction: 1990, operating hours: 16,400 h, condition: good (used), AICHELIN ROTARY FURNACE WITH HESS PRESS AND WASHING MACHINE description: Rotary hearth furnace AichelinModel: RDLGs-R-SJ-1,5m. Year: 1990 External dimensions: 2460 x 2460 x 2335mm Operation: Gas fired with 4 Rekumat self-recovery radiant tube burners. Consumption electrical connection: Connection voltage 380V/50Hz Control voltage 220V/50Hz Total nominal consumption 15Kva Nominal consumption motors 11,7Kva Max. temperature: 950º Cycle time approx. 50 seconds. Hess PressModel : HP 1-48 Year : 1990 Outside dimensions : 1830 x 1650 x 2630mm Empty Weight: 3000kg Max Cooling Unit: 230kg of SteelMax Hodpfx Ajnzhx Heddefb Workpiece Size: Approximately 210mm Caber Washing MachineModel: 350 T Year: 1990 Outer dimensions: 7100 x 1470 x 2700mm Unladen weight: 4000kg Loading height: 1180mm

Year of construction: 2010, condition: refurbished (used), Vacuum furnace for heat treatment of metals with a molybdenum chamber. A high vacuum of 10^-6 mbar is achieved in the furnace. Maximum operating temperature 1300 C. Hjdpfxjn Snx Ho Addofb Dimensions of the working chamber: 0.35 x 0.42 m diameter x height. Molybdenum heating chamber. Closed circuit cooling system with a buffer tank Pumping system with a mechanical and turbomolecular pump. Ability to perform processes: • Annealing in high vacuum • Stress relief • Vacuum brazing • Vacuum brazing • etc. The stove is 100% functional after modernization. Sales with installation and commissioning at the customer's place. The final price depends on the scope of modernization, agreed individually with the client. If you have any questions, please contact us.

Condition: ready for operation (used), Electric furnace REAG – 10 kW | 290V | 17.5A I will sell an industrial electric furnace from the renowned Italian company Reag, designed for applications requiring high temperatures, such as heat treatment of metals, firing ceramics, glass processing or laboratory work. Technical data: Power: 10 kW Voltage: 290V Current: 17.5A Connection system: Star (Y) Serial number: 1796 Manufacturer: Reag (Italy) Hfjdpfjv Drpyox Addob Condition and use: The furnace is in good technical condition, fully functional and ready to work. It was used as intended in industrial conditions.

Year of construction: 2020, condition: used, machine/vehicle number: KW-50S/SW/20/01, KW50S warming chamber, furnace Hodpfou Hk Epex Addjfb The device is designed for thermal processing of materials whose flash point is higher than 300 degrees C. The device consists of two independent operating chambers. Each chamber has its own control system. The chambers have windows that allow the tracking of the device's operation and a lighting function. The chamber has the ability to achieve ramp temperatures up to 120 deg C. The warming chamber is built as an independent panel structure mounted on a frame. The connection of the individual elements is carried out by means of welds, rivets and screws, without any additional structural elements. The connection points of the panel structure are sealed with rubber tape and silicone adhesives. Air circulation inside the chamber is forced by centrifugal fans installed above the heaters.

Year of construction: 2003, condition: used, functionality: fully functional, machine/vehicle number: 3945, Retort Type Mesh Belt Furnace Typ: BLH with protective gas atmosphere Heat treatment line with protective atmosphere KOHNLE BLH-950-250/50-1800 Year of production: 2003 Serial number 3945 Hardening in a protective atmosphere, cooling in oil, washing and degreasing and tempering It consists of - Vibrator for charging - 300 kg capacity - Magnetic conveyor for filling the furnace - Tempering furnace - max working temperature 950 C 3 temperature control zones Hfedpfsw Tcruox Addob strip width 250 mm Capacity 30-50 kg/h Tunnel length 1800 mm Protective atmosphere Propane (possible change of gas for a protective atmosphere) - Oil quench with cooling oil, temperature 70C - Magnetic conveyor for extracting goods - Stand for washing and degreasing - vibrator for charging Annealing furnace - max temperature 500 C Control cabinet SIEMENS ALL ORIGINAL TECHNICAL DOCUMENTATION FROM THE MACHINE Installation dimensions 17 m x 2 m x 2.5 m The furnace can also be modified for nitrocarburizing. Dismantling and loading costs are charged additionally The price of the mentioned line is not fixed for serious enquiries

Year of construction: 2021, operating hours: 100 h, condition: like new (used), The chamber furnace is best suited for preheating, drying, curing and other thermal treatment processes of various materials in the temperature range from 50⁰C to 150°C. We can highly recommend this furnace as ammunition dryer. Chamber volume: 7392 Chamber dimensions: 2200x1400x2400mm (WxDxH) Outer dimensions: 3050x2700x2720mm (WxDxH) Hfsdpolk Hiijfx Addeb Maximum temperature: 160 Heating power: 54kW Total power: 59kW Own weight: 2800kg

Condition: ready for operation (used), Heat treatment furnace, annealing furnace, furnace, Used equipment Manufacturer: Budapest Electric Cable Factory Overall dimensions: 890 x 1350 x 1510 mm Weight: 785 kg Hfodeuhmacopfx Addjb Electrical data: 400 V, Temperature controller adjustable up to 1100°C +temperature controller in the electrical box

Year of construction: 2014, condition: excellent (used), functionality: fully functional, Foundry electric induction melting furnace for melting of: - Steel - iron - aluminum Hfjdpfxslxnlfe Addjb - copper - brass - Bronze TECHNICAL DETAILS Nominal power: 1 ton Temperature: 1700 °C Transformer capacity: KVA 800 Year of manufacture transformer: 2014 High voltage: 10 +- 2 x 2,5% kV current: 41,86 / 38,97 - 23,89 A Low voltage: 840 - 105 V Current: 464 - 275 A EQUIPMENT / SCOPE OF DELIVERY Hydraulic tilting Water cooling system

Condition: reconditioned (used), Melting and casting furnace for aluminum and ZnAl. The furnace is after a general renovation, new lining, specialized painted, functional. The furnace capacity for aluminum is approximately 3,000 kg. Suitable for melting with a gas, oxygen or oil burner. Hjdpsh Nycasfx Addofb

Year of construction: 2019, condition: ready for operation (used), functionality: fully functional, Industrial gas billet heating chain furnace for forging HEATING FURNACE WITH N°04 GUIDES – diam. Max 45 mm Complete with: Automatic load billet conveyor Electronic temperature control Hfjdpfx Aox H Tlyoddsb The CP Forni Heating Chain Furnace SM45 1400 4G 1Z is an industrial gas-fired chain furnace designed for the continuous reheating of billets, primarily for hot forging applications, such as brass or steel. The model designation likely indicates specific configurations, such as max temperature and number of guides. Key Features and Specifications Application: Reheating metal billets (e.g., brass, steel) for the hot forging process. Design: A continuous chain furnace, which allows for a consistent production flow, integrating easily into automated production lines. Heating Method: Industrial gas fired, with high energy efficiency and modern models incorporating heat recovery systems to reduce consumption. Temperature: Specific max temperature CP Forni chain furnaces for steel operate up to 950°C Control System: Equipped with a digital control panel, often a touchscreen, allowing precise management of all operating parameters, including temperature and transport speed.

Year of construction: 2015, condition: ready for operation (used), functionality: fully functional, Industrial gas billet heating chain furnace for forging HEATING FURNACE WITH N°04 GUIDES – diam. Max 45 mm Complete with: Automatic load billet conveyor Electronic temperature control The CP Forni Heating Chain Furnace SM45 1400 4G 1Z is an industrial gas-fired chain furnace designed for the continuous reheating of billets, primarily for hot forging applications, such as brass or steel. The model designation likely indicates specific configurations, such as max temperature and number of guides. Key Features and Specifications Application: Reheating metal billets (e.g., brass, steel) for the hot forging process. Design: A continuous chain furnace, which allows for a consistent production flow, integrating easily into automated production lines. Heating Method: Industrial gas fired, with high energy efficiency and modern models incorporating heat recovery systems to reduce consumption. Temperature: Specific max temperature CP Forni chain furnaces for steel operate up to 950°C Hfjdpjx H Tltofx Addjb Control System: Equipped with a digital control panel, often a touchscreen, allowing precise management of all operating parameters, including temperature and transport speed.