Used Furnace for sale (697)

Condition: like new (used), Chanber size: Rsdpjd Sm Disfx Aaaer 280x180x500mm upper 280x130x450mm lower Max temperature: 700 C °

Condition: new, Year of construction: 2025, An active lime production line is a set of equipment designed to produce high-quality lime from limestone, with the aim of meeting various industrial applications, such as in the production of steel, environmental desulfurization, and other processes. The process typically involves several stages, including limestone crushing, calcination, hydration, and finally, the production of active lime. Here is a general overview of the main steps involved in an active lime production line: 1. Limestone Quarrying: - Raw limestone is extracted from quarries and transported to the lime plant. The limestone may undergo crushing and sizing processes to achieve the desired particle size. 2. Limestone Preheating: - The raw limestone is typically preheated in a preheater or precalciner before entering the rotary kiln. This preheating step helps to reduce the energy consumption in the kiln by partially decarbonizing the limestone. 3. Loading into the Rotary Kiln: - The preheated limestone is loaded into the rotary kiln, a large, rotating cylindrical furnace. The kiln is inclined at a slight angle to facilitate the movement of materials through the kiln. 4. Calcination: - In the rotary kiln, the limestone undergoes high-temperature calcination (typically in the range of 900 to 1,450 degrees Celsius). This process causes the limestone to undergo chemical and physical changes, converting it into lime (calcium oxide). 5. Cooling: - After calcination, the lime moves through the cooling zone of the kiln, where it is cooled down. This cooling step is essential to stabilize the lime and prepare it for further processing. 6. Hydration: - The quicklime produced in the kiln is then slaked with water in a hydration process to produce slaked lime (calcium hydroxide). This is typically done in a separate hydrator. 7. Separation of Unreacted Lime: - The slaked lime is separated from any unreacted quicklime or impurities. This step ensures that the final product is of high quality. Redpfoq Nyzbex Aaaor 8. Filtering and Drying: - The separated slaked lime is filtered to remove excess water, and the resulting product is dried to achieve the desired moisture content. 9. Storage and Packaging: - The final product, active lime (calcium oxide), is stored in silos or other storage facilities. It can then be packaged for sale or transported to end-users. 10. Environmental Considerations: - Dust collection systems and other environmental control measures are often implemented to minimize emissions and ensure compliance with environmental regulations. The design and configuration of an active lime production line can vary based on factors such as the type of limestone used, production capacity requirements, and specific industrial applications. Modern production lines often incorporate advanced technologies to optimize energy efficiency, minimize environmental impact, and ensure high-quality active lime production.

Year of construction: 2002, condition: good (used), functionality: fully functional, Temperature max: 700° Celcius Opening LxH: 1.500 x 30 mm Country of origin: The Netherlands Electric power: 14 kW Machine LxWxH: 2.000 x 1.000 x 1.700 mm Rodewi Ry Hspfx Aaaer Machine weight: 1500 kg

Year of construction: 2019, operating hours: 10 h, condition: like new (used), functionality: fully functional, temperature: 1,300 °C, Nabertherm LH 60/13 laboratory furnace – as new condition - 1300°C - incl. Protective Gas Box + Charging Cart WS 1 Rjdpfx Ajyxy Dmeaaer Nabertherm LH 60/13 Chamber Furnace – 1300°C – Year 2019 – As New – incl. Protective Gas Box + Charging Cart WS 1 For sale: Nabertherm LH 60/13 high-quality electric chamber furnace in as new condition, including a protective gas box and Nabertherm Charging Cart WS 1. The furnace was validated and tested, but was never put into operational service. It has therefore remained in exceptionally clean condition, as clearly shown in the photos. This setup is particularly suitable for applications requiring a controlled atmosphere / protective gas process. Furnace specifications Brand / model: Nabertherm LH 60/13 Year of manufacture: 2019 Maximum temperature: 1300°C Chamber volume: 60 liters Internal chamber dimensions: 400 x 400 x 400 mm Connected load: 11.0 kW Electrical supply: 400 V / 3-phase / N / PE Frequency: 50 Hz Current: 15.9 / 15.9 / 15.9 A Serial number: 371385 Included in the sale Nabertherm LH 60/13 chamber furnace mobile base / frame control unit visible gas connection setup protective gas box Nabertherm Charging Cart WS 1 Charging Cart WS 1 The included Nabertherm Charging Cart WS 1 is designed for the handling and charging of protective gas and annealing boxes. According to Nabertherm, it features a parallel guided lifting mechanism and is suitable for furnace models including LH 60. This makes the complete setup especially suitable for specialized thermal processes where oxidation must be minimized or where a controlled atmosphere is required. Condition validated and tested never in operational service as new condition.

Year of construction: 2024, condition: ready for operation (used), The heat exchangers are part of the system but were commissioned separately. The new price of the system was therefore over EUR 2 million. The official commissioning took place in April 2024; however, this only involved trial runs and not series production. Technical Data – Modular Chamber Furnace System for Homogenizing Aluminum Billets (Used Equipment) Machine type: Modular chamber furnace system with heat recovery Application: Homogenization (heat treatment) of aluminum billets in batches Design: Electrically heated chamber furnaces with jet heating and air circulation, heat exchanger furnaces, charging machine, racks System Construction The system essentially consists of: • 1 preheating furnace (BSN 1607) – electrically heated, jet heating • 2 holding furnaces (BSN 1608, 1609) – electrically heated, air circulation • 2 heat exchanger furnaces (BSN 1610, 1611) – unheated, with air circulation • 1 charging machine (BSN 1612) – electric/hydraulic • 12 charging racks (BSN 1614) • Control system with PLC (Siemens S7 1515F 2PN, Profinet) and operator panel • Contact thermocouples for direct billet temperature measurement The system is designed as a complete machine in accordance with Machinery Directive 2006/42/EC (CE compliant). Redpfx Ajyt Ihbjaajr Further information can be found in the attached PDF.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Horizontal glass convection tempering furnace . For max. glass sizes : 1500 x 3000 mm Glass thikness : 4 - 19 mm Voltage : 400 V 50 Hz Control voltage : 230 V V AC 24 Power : Heating : 296 Kw Motors : 262 Kw Total : 558 Kw Rjdpeyw Hgrsfx Aaajr Current : Heating : 470 A Motors : 450 A Total : 920 A

Year of construction: 1997, condition: like new (used), Maximum temperature: 1290 °C Rjdpst Ebpujfx Aaaer Interior dimensions: 630 x 530 x 760 mm Electrical connection: 400 V kW Space required: 1200 x 870 x 1810 mm Weight: 470 kg Heating output: 16.5 kW

Year of construction: 2016, condition: good (used), Maximum temperature: 650°C Internal dimensions: Width 650 mm Depth 750 mm Height 600 mm Electrical connection: 380 V, 20.7 kW Weight: 390 kg Rsdpfsxb A E Aex Aaajr Space requirement: 1600 x 1200 x 1800 mm

Condition: as good as new (ex-display), vacuum drying oven Rjdpfefbl T Njx Aaajr Inside: 700 x 700 x 600mm deep Heating capacity: 3 KW Temperature range 1-120°C Outer dimensions: 1280 x 950 x 1280 Pressure range: Atmosphere - 0 Bar (Not suitable for overpressure) A suitable vacuum pump is provided depending on the application. Supply line: 3ph , N, PE 400V, 50Hz CEE plug The interior installation can of course be completely removed!

Condition: like new (used), temp. max.: 1300°C internal dimensions (w x d x h): 750 x 750 x 500 mm external dimensions (w x d x h): 1250 x 1750 x 2100 mm loading weight : max. 150 kg power: 44 kW heating: 5-sides heated control zones: 1 process control controller: yes weight: 700 kg voltage: 400 V 3/N current consumption: 63 A PLC: Siemens S7 control cabinet: brand new - With an air heater under the furnace, pre-heated air with a temperature of up to 400°C can be flushed into the furnace chamber during the debinding phase. - Controllable cooling housing with autom. valve - Automatic exhaust damper - Automatic exhaust flap - Monitoring of fresh and exhaust gas volume flow, as well as furnace chamber Rodsyxnk Uepfx Aaasr pressure by differential pressure monitor.

Condition: used, Gas heated double chamber furnace type: KA_GB 10.14.14/d heating: natural gas usable dimensions per chamber width: 1.000 mm height: 1.400 mm Redsdyvipjpfx Aaajr depth: 1.400 mm max. temperature: 550°C working temperature: 250 – 550°C uniformity: ±5 K total connected load: 15 kVA hot gas circulator power: 2 x 5,5 kW (1470 min-1) combustion air blower power: 1 x 1.5 kW (5520 rpm at 95 Hz) burner output: 2 x 100 kW (expandable to max. 2 x 150 kW) number of control groups: 2

Condition: good (used), debinding and sintering chamber furnace, make Nabertherm type: LH 280/13 DBS temp. max.: 1300°C internal dimensions (w x d x h): 750 x 750 x 500 mm external dimensions (w x d x h): 1250 x 1750 x 2100 mm loading weight : max. 150 kg power: 44 kW heating: 5-sides heated control zones: 1 weight: 700 kg voltage: 400 V 3/N current consumption: 63 A PLC: Siemens S7 control cabinet: brand new - with an air heater under the furnace, pre-heated air with a temperature of up to 400°C can be flushed into the furnace chamber during the debinding phase. - controllable cooling housing with autom. ball valve - automatic exhaust damper - automatic exhaust flap - monitoring of fresh and exhaust gas volume flow, as well as furnace chamber pressure by differential pressure monitor. Rsdpemfn Ruefx Aaajr -The furnaces themselves, particularly the brickwork, heating elements, and insulation, are in excellent condition with low or no working hours, making them practically like new.

Condition: used, Electrically heated tempering furnace with protective atmosphere Type: TSK-8-10-12-80 Redjxcphmopfx Aaasr Temperature: max. 950°C Internal dimensions (W x H X D):800 x 1050 x 1200 mm Heating power: 80 kW Atmosphere fan: 4,0 kW

Condition: good (used), Internal item no.: 25121 Hardening furnace Rodsyxpdcjpfx Aaaer Nolzen WL 20 / 19 / 40 Max. temperature: 1150°C Power: 8KW Connection: 380V Internal chamber dimensions: W 20 / H 19 / D 40 cm Dimensions (LxWxH): 60 x 76 x 84 cm Weight: approx. 200 kg

Condition: excellent (used), Despatch LCC2-14NV-3 Year of manufacture: approx. 2018 Max. temperature: 260 °C / 500 °F Power: 415V - 1PH - 50 Hz Full Load Amps: 25.2 AMPS S.C.C.R: 5 kA Heater: 16 kW / 22.3 AMPS Rodsyvlauopfx Aaaor Largest Motor Amps: 2.1 AMPS Total Motor Amps: 3.2 AMPS

Condition: new, Year of construction: 2026, Recirculating Air Chamber Furnace, electric, new unit, delivery time 12 weeks - Temperature: 300°C - Internal dimensions (W x D x H): 1500 x 3000 x 2000 mm - External dimensions (W x D x H): 2410 x 3560 x 2730 mm - Capacity: 9,000 liters - Control: Eurotherm Nanodac, 100 programs, each with 25 segments; an additional 100 programs can be saved/loaded via FTP or USB memory stick - 2 recirculation fans - Double doors with safety door sensors - Overtemperature protection: Eurotherm 3216i - Control/Recorder with color touch display - Sturdy steel construction, exterior in anthracite - Motorized dampers - Electrical specification: 400 V / 50 Hz / 3NPE - Increased heating capacity approx. 70 kW - Recessed entry for loading trolleys - Documentation, CE Declaration of Conformity - Electrical wiring diagram with spare parts list Redpfxjlkb Ezj Aaajr Transport, installation, and staff training are available upon request. As a new unit, this furnace is also available with exhaust fan and alternative equipment! Delivery time approx. 10–12 weeks—please contact us for details! We offer new and used industrial furnaces, which we can also modify or upgrade to customer specifications. Inspection at our facility is possible at any time by appointment. Furnace, ovens, drying oven, industrial oven, drying cabinet, heating oven, heating cabinet, recirculation oven, chamber oven, heating chamber, recirculation chamber oven, tempering oven, annealing oven

Year of construction: 2009, condition: reconditioned (used), functionality: fully functional, machine/vehicle number: SN FX036084, 12 months warranty, in stock Resistance-heated unit with gas-tight furnace muffle - Continuous operation Tmax 800°C - Max temperature approx. 900°C (under protective gas) - SE-402 program controller - 3-zone heating - Gas supply system: 2 different protective gases, as well as fuel gases - Gas circulation - Vacuum system - Internal muffle dimensions (W x D x H): 580 x 830 x 1500 mm (special length) - Muffle capacity approx. 722 liters - Max. charge weight approx. 1000 kg - Two-stage rapid cooling with frequency converter - Flare system with flame monitoring - Sight glass DN150 - Max. operating gas pressure 7 mbar - Mains voltage 400V, 3-phase, N, PE - Heating power 70 kVA - Rated current 3x97A - Weight 1900 kg - External furnace dimensions (W x H x D): 1700 x 1950 x 2750 mm - Control cabinet (W x D x H): 510 x 1360 x 500 mm - Operating manual, circuit diagrams, CE declaration The furnace is offered fully overhauled (all switching electrical components such as contactors etc. replaced with new parts), new sealing, electrical inspection including test logs. Inspection at our warehouse by appointment! Rjdpfx Ajyxlwreaasr Furnace, ovens, industrial furnace, melting furnace, tilting crucible furnace, crucible furnace, aluminum melting furnace

Year of construction: 2010, condition: excellent (used), functionality: fully functional, machine/vehicle number: SN101660321, 12-month warranty, in stock -Electrically resistance-heated tilting crucible furnace system for melting aluminum -Max. furnace temperature: 1200 °C -Max. melt bath temperature: 1050 °C -Melting capacity: 320 kg Al/h -Controller H 100 (5 programs with 4 steps each) -Includes 2-channel preset timer and 6100A recorder for thermocouple data logging for customer-side connection Redpfx Ajylkz Uoaaor -No exhaust system required -Integrated safety system: In case of thermocouple failure, the furnace continues operation at reduced power to prevent the melt from solidifying -Temperature limiter for the chamber as overtemperature protection. The limiter disconnects the heating system once the set limit temperature is reached and only reactivates it after the temperature has dropped below the threshold. -Power rating: 140 kW (increased!) -Mains connection: 400V 3/N/PE, 50 Hz -Energy consumption (lid closed/open) approx. 8/17 kW -Weight approx. 3000 kg -External dimensions (L x W x H): approx. 2010 x 2000 x 1460 mm -Documentation, CE declaration Inspection in our warehouse by appointment! Furnace, industrial furnace, melting furnace, tilting crucible furnace, crucible furnace, aluminum melting furnace

Year of construction: 1985, condition: used, Hardening furnace Heraeus Redpfx Aogtxuqjaaor Type KM 260 width 250 mm height 150 mm depth 500 mm Temperature up to 1150 c

Year of construction: 2024, condition: like new (used), functionality: fully functional, System Overview Complete modular chamber furnace system for batch homogenising of aluminium extrusion billets, electrically heated with jet-heating, waste-heat recovery, and full automation. CE-certified (Machinery Directive 2006/42/EG). Redoyuvq Tspfx Aaasr Scope of supply: 1× Preheating furnace (BSN 1607) — electric, jet-heating 2× Holding furnaces (BSN 1608, 1609) — electric, forced air circulation 2× Heat-exchanger furnaces (BSN 1610, 1611) — unheated, forced air circulation 1× Charging machine (BSN 1612) — electric/hydraulic 12× Charging racks (BSN 1614) Control cabinet with Siemens S7-1515F 2PN (Profinet) PLC and operator panel Pusher thermocouples for direct billet temperature measurement Key technical advantages: Jet-heating for fast, uniform billet heating (typically 3–4× faster than conventional convection furnaces) Integrated heat-exchanger furnaces for efficient waste-heat recovery — reduced energy consumption and operating costs Overtemperature operation possible — shorter cycle times with direct billet temperature monitoring Suitable for homogenisation and/or solution heat treatment / ageing Modular design — suitable for new installations and retrofits of existing lines Ideal for: Aluminium extrusion plants and casthouses seeking to optimise energy consumption, CO₂ footprint, and throughput. Further technical details available upon request (PDF with full specifications).

Condition: good (used), Year of construction: 2005, Pusher Furnace System (PUS1), Manufacturer: Ipsen International GmbH, Type: PP-2-65x65x65-18-G, Serial No.: AN 10.1595-01, Year of manufacture: 2005, Fuel: Gas/Natural Gas/Nitrogen/Methanol, 414 kW, 296 kVA comprising: Two-Chamber Pre-Washing Machine, Type: WPSSB-65x65x65-E, 302 A, 199 kVA, electric, Washing tank 2 m³, rinsing tank 2 m³, 60-80°C Pusher Preheating Furnace, Type: DL 65x65x65 4-G, 25 A, 9.5 kVA, natural gas heated, 80-100 mbar, 350-500°C Pusher Gas Carburizing Furnace (Double Line), Type: PP-2 65x65x65-18-G, natural gas heated, 86 A, 29.6 kVA, 10 kWh/m³, 80-100 mbar, 860-950°C, 140 pieces per batch, 695 kg/h Oil Quenching Bath (Hardening Oil), Type: QO-65x65x65-E, 161.5 A, 93.1 kVA, electric, air cooling, 6 m³ tank volume, 120°C max., 60-80°C working temperature Rsdpfx Ajyabxyoaasr Two-Chamber Post-Washing Machine, Type: WPSSB-65x65x65-E, 302 A, 199 kVA, electric, washing tank 2 m³, rinsing tank 2 m³, 60-80°C Pusher Tempering Furnace, Type: DL-65x65x65-6-E, 126.8 A, 84 kVA, electric, 300°C max. furnace temperature, 150-240°C working temperature Batch Transport System, Measuring, Control, and Switch Cabinet with Conti-Control System, Type: CO/CO2-2 Batch Data: Case hardening for transmission parts 650 mm x 650 mm x 650 mm, max. 280 kg, batch transport height 800/2,200 mm

Condition: used, heating: electrical useable space: ø400 x 400 mm temperature: max. 1.300°C ventilation: exhaust fan during the cooling phase and activated cooling fan Rjdpfx Aov Sbc Eoaaer ultimate vacuum: 10 mbar exhaustion time: ca. 5 min nitrogen: inlet pressure min. 3 bar oxygen: inlet pressure min. 3 bar

Condition: refurbished (used), Roller hearth furnace, make Mahler type: RHEE 500/100/3000-6500 refurbished: 2016 max. charge weight: 40 kg/m nominal throughput: 288 kg/h clear roll width: 500 mm Rodpfxjfc Hbdo Aaasr clear height above roll: 100 mm furnace length: approx. 22100 mm working temperature: - Warm-up zone: 800-1000°C - High temperature zone 800-1250°C heating: electric connected load: 400 kW gases used: nitrogen, hydrogen

Condition: ready for operation (used), A Rohde chamber kiln is available. Volume: 600l, max. temperature: 1000°C, internal dimensions X/Y/Z: 710mm/870mm/920mm, power: 40kW, insulation layers: 2, heating directions: 4, heating element: grooved refractory brick. Machine dimensions X/Y/Z: approx. 1100mm/1500mm/2300mm, weight: approx. 1000kg. Documentation available. An on-site inspection is possible. Redpoyvix Iefx Aaajr

Year of construction: 2018, condition: excellent (used), functionality: fully functional, machine/vehicle number: SN49983, Chamber furnace in very good condition. 12 months warranty. - Max. temperature: 1300 °C - Internal dimensions (W x D x H): 400 x 400 x 400 mm - Capacity: 60 liters - Separate main switch - 5-sided heating - Fresh air and exhaust air with flaps, electrically operated by Belimo actuators - Inlet fan controlled via frequency inverter and regulator - JUMO control system (language can be switched!) - Additional drag element type S for external data logging - Documentation included - Net weight: 250 kg - Power consumption: 18 kW - Current: 26 Ampere - Connection voltage: 3/N/PE 400 VAC - Connection type: prepared for fixed connection with 32 A plug - Documentation and CE declaration We have several units of this furnace model in stock. Inspection by appointment. Redpex U Ekdofx Aaajr Furnace, furnaces, annealing furnace, industrial furnace, chamber furnace, kiln, drying oven, tempering furnace, laboratory furnace, hardening furnace