Used Fz 08 for sale (13,328)

Condition: used, Winding motor, drum winder for crane, trailing cable motor, gear motor, electric motor -Speed: 60 rpm -Power: TA = 5 Nm -Construction: B3 -Shaft: Ø 25 mm -Protection class: IP 44 -Number: 1x available Gjdpjdkzv Eofx Ag Neuh -Price: per piece -Dimensions: 700/225/H210 mm -Weight: 30 kg

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, operating hours of spindle: 4,486 h, Initial commissioning: 2002 Control system: Fidia C20 with HPX operator panel Machine hours: 146,161 h X-axis: approx. 3,000 mm Y-axis: approx. 2,360 mm Z-axis: approx. 1,500 mm A-axis: ± 105° C-axis: ± 300° Godpfxsw Au H Re Ag Nouh Clamping table Clamping surface: approx. 5,000 x 2,000 x 400 mm T-slot spacing: 18H12 / 250 mm Table load capacity: 15,000 kg/m² 2-axis milling head AC3 (2003) Spindle power: 28 kW Spindle speed: max. 18,000 rpm Torque: 90 Nm Tool holder: HSK 63A Tool clamping: hydraulic Minimum quantity lubrication: external Linear axis drives Feed rate X, Y-axis: up to 20 m/min Feed rate Z-axis: up to 20 m/min Axis acceleration X, Y, Z-axis: up to 1.5 m/s² Electrical connections Connected load: 40 kW Main fuse: approx. 80 A Dimensions, weights Space requirement machine including peripherals: approx. 7,300 x 5,600 x 5,600 mm Total weight: approx. 16,500 kg Colour Enclosure, gantry, control cabinet: light grey Milling head and applications: turquoise Additional equipment - 18-position chain-type tool changer - 3-sided enclosure, without extraction ducts Condition of the machine Fully operational, very good condition. Dismantled, stored and immediately available.

Condition: ready for operation (used), Year of construction: 2000, Main Drive Spindle speed range 45000 Spindle motor power 6 kw Movement X-Axis Movement 2450 mm Y-Axis Movement 1400 mm Z-Axis Movement 800 mm This 5-axis GEISS FZ 2000 x 1000 was manufactured in 2000. It features a robust CNC milling machine capability with X-axis travel of 2450 mm, Y-axis of 1400 mm, and Z-axis of 800 mm. The milling spindle supports a maximum speed of 45000 rpm with a power of 6 kW. Consider the opportunity to buy this GEISS FZ 2000 x 1000 CNC milling machine. Contact us for more information about this machine. Gusdjwwbkropfx Ag Neh Application Types Milling

Condition: excellent (used), functionality: fully functional, empty load weight: 411 kg, digging bucket width: 1,750 mm, Year of construction: 2015, machine/vehicle number: 2015-2222, Cseri, German manufacturer, tiltable ditch cleaning bucket, MS 08 mount, capacity 360 liters. Gujdpfsw Aguysx Ag Neh

Condition: excellent (used), Year of construction: 2002, CHIRON FZ 15S with 4 axis in Perfect Condition Machine can be inspected any time under power Gjdporgqu Hefx Ag Njuh

Condition: good (used), Year of construction: 1999, CNC vertical machining center CHIRON type FZ 22 L Machining center with CNC control SIEMENS 840-D Series Traversing distance X: 2600 mm, Y: 520 mm, Z: 630 mm Table size 2700 x 570 mm Table load 525 kg (per meter) Tool holder SK 40 (DIN 69871) Drilling capacity 35 mm Tapping capacity M27 Tool diameter 75 mm Diameter with free secondary positions 105 mm Tool-to-tool change speed 2.0 sec. Distance spindle - table 190 to 820 mm Spindle speed max. 10,500 rpm Main spindle drive max. 18.5 kW Transport dimensions of the basic machine L x W x H 4600 x 2470 x 2950 mm Guodpfslp Rl Ajx Ag Neh Machine weight approx. 7.5 tons

Condition: used, Reflective light barrier, light barrier -Type: RK 08/1 -5.5 V AC -24 V DC -Weight: 0.2 kg Gsdpsb A Si Nsfx Ag Neuh

Condition: excellent (used), Year of construction: 2014, First commissioning: 2014 Control: Heidenhain iTNC 530 HSCI including HR 520 handwheel Machine hours Power-on hours: approx. 90,000 h Spindle hours: approx. 38,000 h Current milling spindle hours: approx. 900 h Travel distances X-axis: approx. 2,500 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,250 mm A-axis: ± 110° C-axis: ± 300° Clamping table Clamping surface: approx. 2,500 x 3,250 x 600 mm 2-axis milling head VH30 Spindle power: 60 kW Spindle speed: max. 22,000 rpm Torque: 95 Nm Tool holder: HSK 63A Tool clamping: hydraulic Coolant supply: external and internal Linear axis drives Feed speed X/Y/Z-axis: up to 60 m/min Axis acceleration X/Y/Z-axis: up to 5 m/s² Electrical specifications Connected load: 190 kVA Main fuse: approx. 315 A Dimensions, weights Space requirement (machine with peripherals): approx. 10,000 x 8,000 x 5,650 mm Total weight: approx. 63,000 kg Colour Enclosure, portal, control cabinet: RAL 7035 light grey Milling head and applications: RAL 6038 luminous green Description: Additional equipment - Coolant supply with belt filter system Guedpfx Agswywcie Neh - 50-position chain-type tool changer - Work area enclosure - Chip conveyor - Emulsion mist extraction system from LTA Optional at extra cost: - Renishaw RMP60 wireless measuring probe - BLUM Control NT Condition of the machine Fully functional, in excellent condition and available for inspection under power! Images are sample photos from a new machine of this type. Original images to follow shortly!

Condition: used, Year of construction: 2012, Overview The filler was built in 2012 by Italian manufacturer Framax. The filler comes with a Framax labelling machine. The machines have been regularly maintained and is already dismantled. Both machines can be viewed in person. Techn. Details Capacity: 1,800 bph (max. 2,200 bph) Processed format: 0,33 L Crown cap Filling monoblock | Framax | RFC‐09/08/1‐C 2K A/P | 2012 Rinser positions: 9 Filler positions: 8 Capper positions: 1 Suitable for natural beer Type of filling valve: EVO2 (15 mm) Max. diameter of bottle: 115 mm Min./ Max. height of bottle: 200 mm/ 350mm Dimensions: Length: 4,500 mm Width: 1,250 mm Height: 2,500 mm Gusdpfx Aerlf Tqog Neh

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 425 mm, TECHNICAL DETAILS Godpfxjwtrave Ag Nsuh Control: Sinumerik X travel: 550 mm Y travel: 300 mm Z travel: 425 mm Rapid traverse: 30 m/min Spindle mount: ISO SK 40

Condition: good (used), Year of construction: 2001, spindle speed (max.): 12,000 rpm, travel distance Y-axis: 400 mm, rapid traverse X-axis: 300 m/min, rapid traverse Z-axis: 425 m/min, Chiron machining center type FZ 15 W high speed with chip conveyor year 2001 with turntable 12,000 rpm internal cooling. X 300 Y400 Z 425 2 pcs available more pictures can be sent Gjdevtca Uspfx Ag Nsuh

Condition: new, overall weight: 750 kg, empty load weight: 215 kg, maximum load weight: 535 kg, loading space volume: 2.3 m³, loading space length: 2,060 mm, loading space width: 1,100 mm, loading space height: 1,000 mm, color: silver, construction height: 1,550 mm, working width: 1,560 mm, Hydraulics, automatic reverse, hot-dip galvanizing, unbraked, sheet steel body, * IMMEDIATELY AVAILABLE * Sheet steel body, unbraked Technical data: Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY! - Gross vehicle weight: 750kg - Unladen weight: 215 kg - Payload: 535 kg - Interior dimensions: 206 x 110 x 100 cm (L x W x H) - Overall exterior dimensions: 326 x 156 x 155 cm (LxWxH) - Loading sill height: 51 cm - Tires: 155/70R13 steel rim - Brake: no - Support wheel: at extra charge - 100km/h: at extra charge - incl. vehicle documents Vehicle body: - Floor: Wood, Finnish multiplex board - Walls: sheet steel - Roof material: sheet steel - Chassis: ALKO rubber spring axle - Number of lashing eyes: optional - Rear door: - Cover - Tailgate: no - Tailgate material: - - Tailgate/door function: tension lock - Interior light: at extra charge - Supports: at extra charge Frame/chassis: tubular drawbar, hot-dip galvanized - Lighting plug: 13-pin - Approval documents: COC papers Standard equipment: - Sturdy drawbar, hot-dip galvanized - Floor panel made of Finnish multiplex - Side walls made of very solid sheet steel - Laterally slanted lid for improved access to tools or built-in interior shelves - Lid with sealing profile, - Tension locks for lid - Plastic mudguards - 13-pin plug - Reversing lights - Large reversing lights plug - reversing lights - large safety lighting - integrated rear fog light - body: splash-proof - registration papers: COC papers Accessories can be retrofitted - please enquire: - anti-theft device - support wheel - rear supports - 100km/H approval with wheel shock absorber - lashing straps - lashing eyes - slotted-hole rails for tensioning straps & locking beams - bar strip with rubber coating for tensioning straps & locking beams - steel or aluminum locking beams - interior lights - reversing lights - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Gsdpfou Hrvvjx Ag Neuh

Condition: used, mileage: 426,324 km, power: 338 kW (459.55 HP), first registration: 05/2018, fuel type: diesel, number of seats: 55, gearing type: automatic, emission class: euro6, color: white, brakes: retarder, Equipment: ABS, air conditioning, bathroom, electronic stability program (ESP), navigation system, onboard kitchen, parking heater, +++Original-KM+++ Engine: MAN AD Blue Emission class: Euro 6 Gearbox: Automatic Seats: 53+1+1 sleeper seats with lap belts Safety * Retarder * Cruise control * Adaptive cruise control * ABS, ESP, EBS * Front fog lights * Immobilizer * Xenon lights * Brake assist * Lane departure warning system * Reversing camera * Multifunction steering wheel Passenger compartment * Auxiliary heating * Wood floor look * Air conditioning * Tables * Curtains * Luggage racks * Luggage nets * Jet ventilation * Reading lamps * Double glazing * Footrests * Kitchen * Refrigerator * Center WC * Head leather inserts Gjdsv Dpwbspfx Ag Nsuh * Tour guide microphone * Driver's microphone Exterior * Trailer coupling * Lifting/lowering system * Power steering * Tachograph with card * Sun visor * Electric exterior mirrors * Central locking * Roof hatches, fans, roof ventilator Audio [&] communication * Navigation system * Radio / CD * Video / DVD * USB connection Miscellaneous * Vehicle dimensions: length 13.36m, width 2.55m, height 3.87m * German vehicle documents * hubcaps * Twin tires * Tires VA: 50%, MA: 50%, HA: 50% Our internal vehicle number: 10978 Errors excepted. Pictures and text may differ from the vehicle. Over 300 vehicles always on offer.

Condition: used, functionality: fully functional, An industrial decanter is a type of centrifuge used to separate solids and liquids in industrial processes, such as wastewater treatment, olive oil production, brewing, starch extraction, etc. GEA two-phase decanter separators have been specially designed for olive oil extraction. The drum has a cylindrical part that allows an efficient separation and clarification of liquids. The centrifugal force projects the solid particles against the drum wall, which is transported by the auger to the solids outlet. Gujdpfjwny N Iex Ag Noh The separated and clarified oil phase discharges by gravity through the liquid outlet regulated by diaphragms of the decanter, while the solid phase leaves the decanter through the solids outlet. Solids: 1.8 kg/dm3.

Condition: good (used), WMA WMP 08 Single-handed butt point machine Air-cooled single-handed impact point system for vehicle construction, tank construction, steel cabinet construction, sheet metal processing and wire industry - Problem-free welding of all sheet metal - galvanized sheets can be welded perfectly thanks to controlled current increase and controlled current decrease - Air-cooled, equipped for external water cooling - tools are easy to change thanks to standardized swivel connections - only one plug each for welding power cable, control cable and water cooling - reproducible welding results at all times thanks to built-in, automatic energy control Microprocessor thyristor control - constant current control - seamless process monitoring - Easy and convenient to operate - all set parameters and process variables can be read at a glance - welding parameters can only be changed by authorized personnel - Configuration and program settings can be managed via a central PC WMA WMS 108 Microprocessor thyristor controller - 7 times - 8 programs - Built-in device - Automatic mains frequency detection 50/60 Hz - Power failure-proof storage of parameters - "with/without power" switchover via button Additional configuration parameters locked for users): - Program selection - Progressive contact - Time of continuous contact - Two-hand interlock (check) - Interlock Start signal - Current flow control - Response threshold - Current flow control - Monitoring time - Current flow control - Power factor adjustment - Delay 1st half-wave External inputs (24V, DC stabilized and switching) Gjdpfxsq H Aqxj Ag Nouh - Thermoswitch - Thyristor temperature - EMERGENCY OFF - Start 1 - Start 2* - Pressure contact - Program 1* - Program 2* - Pre-stroke On - Program interruption after hold-off time (only force) - Two-hand interlock (check)* * These functions can be activated or blocked via configuration parameters. External outputs (24V, DC unstable ± 20%; + switching, max. 5 W): - Solenoid valve pre-stroke - Welding solenoid valve - Relay Advance contact - Relay Ready for operation Manufacturer: WMA Type: WMP 08-01 Rated voltage: 400 V Mains frequency: 50 Hz Rated power (at 50% duty cycle) 22.5 kVA Switch cabinet with PLC logo PDF files under Documents tab Further articles - new and used - can be found in our store! International shipping costs on request!

Year of construction: 2021, condition: like new (used), 1.Introduction: 1. This document describes the functional requirements regarding a; 1.1. LC tray degassing chamber 1.2. LC tray degassing chamber is a (controlled vacuum chamber) in which an aluminum tray containing LC liquid is degassed in a vacuum environment during a period of time (i.e. entrapped air is evacuated) Vacuum profiles; 1.1. Pressure set points adjustable between 1.103 and 1.10-3mBar 1.1.1. Measurement range: 1.103 – 5.10-4 1.2. Time set points adjustable between 1 and 600min per step 1.2.1. Degassing step (D) can be minutes to days 1.3. Evacuation and ventilation rates must be controllable 1.4. The evacuation cycle (A – D) is performed automatically 1.4.1. The vent step (E) must be activated manually (operator) 1.5. Typical degassing profile 2.Interior; 2.1.Stainless steel (aluminum) polished process chamber (inside) 2.1.1. Leak rate to be discussed 2.2. LC-tray (adaptation) drawer to easily (un-)load the LC-tray (no shock/shake movement allowed), see Section 2 LC-tray dimensions and appendix 1 2.3. LC tray must be level (waterpas) at all times to prevent LC spillage 2.4.Chamber must be easily/quickly accessible for cleaning and/or LC tray (un)loading 2.5.Chamber inside must be polished for easy cleaning and prevention of contamination and/or moisture collection Guedowam Saopfx Ag Nsh 2.6.Monitoring (window) possibility of the degassing cycle i.e. monitoring LC liquid surface behavior in the LC tray 2.7.No process contamination caused by chamber material (-manufacturing)

Condition: used, Year of construction: 2001, machine/vehicle number: Z 293 - 040, For sale: used Raster Zeulenroda GHP 400 H/K-08 with a nominal force of 2x2000kN. Total weight: 32 tons. Rated current: 80A. Year of manufacture: 2001. Available from 08/2025. Gedpfx Agowzkgwe Nouh

Condition: used, Year of construction: 2012, machine/vehicle number: DHT 05-15-3.6-08-07,5, Machine no.: 181174 Manufacturer: AGTOS Type: Continuous overhead conveyor blast machine Designation: DHT 05-15-3.6-08-07,5 Turbines: 8 turbines with 7.5 kW Extraction air volume: 7500 m³/h Year of construction: 2012 Other details: Characteristics of the installed filter system Gsdpfsrq Hd Sex Ag Nouh Residual dust content with secondary filter: ≤ 2 mg/Nm³ Type: Dry dedusting system Characteristics of the blasting system Blasting media (material and size): Steel abrasive Abrasive quantity (initial filling): 5 tons Workpiece material: Steel Max. Workpiece length: 1400 mm Passage width: 500 mm Passage height: 1500 mm Sound pressure level without sound insulation: ≤ 85 dB(A

Condition: good (used), DEMAG gearbox / crane gearbox. Type: FG 08 - 2 pieces Type: AF 12 - 4 pieces Guodpfou T Sarex Ag Noh

Condition: used, Year of construction: 2001, x-travel 550 mm y-travel 500 mm Guodevtgw Depfx Ag Noh z-travel 400 mm Control Siemens spindle tunring speed 12.000 U/min table surface area 1050 x 450 mm table load 500 kg In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 1 h, machine/vehicle number: LDN0231008630, load capacity: 230 kg, lifting height: 6,000 mm, empty load weight: 1,710 kg, fuel type: electric, drive condition: 100 %, maximum load weight: 230 kg, operation weight: 1,710 kg, chain condition: 100 %, 0 Crawler work platform Crawler work platform CAPRI 06-08 We offer you; Crawler work platform Cabri 06-08 New machine Working height 8 meters Platform height 6 meters Machine dimensions: Machine length: 2067mm Width machine: 1030mm Machine height 2183mm Height platform folded 1832mm Length platform (retracted) 1859mm Length platform (extended) 2759mm Platform extension: 900mm Platform dimensions: 1859x810x1130m0 Load capacity: 230kg Load capacity platform extension: 113kg Turning circle machine: 0 meter Drive motor 24V/ Batteries 4xDC 24 V Charger integrated 24V/15 A Machine weight 1710kg Advantage Cabri platforms: ECU & control unit from brand manufacturer installed Improved batteries installed Fully electric operation Immisson free working stronger crawler chassis non-marking tracks Robust construction The machine weight is distributed over a large area by the light caterpillar drive chains, which reduces the ground pressure. As a result, it is ideally suited for indoor use on sensitive floors with low load-bearing capacity. Non-marking tracks that leave no traces All-terrain tracked platform, up to 25% incline Ground obstacles can be overcome Also suitable for working on uneven ground Excellent traction reinforces grip on the ground Extremely maneuverable in confined spaces Low maintenance and servicing costs thanks to AC technology This advertisement does not constitute a binding offer, it is for illustrative purposes only. All information is given in good faith. Errors, typing errors and prior sale reserved You will receive an invoice with VAT shown. Shipping is possible for an extra charge. With kind regards Croyk77br3 Steffen Küster Gedpfx Agorig Dde Njuh K. u. K. Maschinen GmbH Old airfield 30 49377 Vechta Registered office of the company: Vechta AG OL HRB 216489 Managing directors: Steffen Küster/ Lukas Kempf

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 300-01, spindle speed (max.): 12,000 rpm, travel distance X-axis: 550 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 425 mm, number of slots in tool magazine: 108, swivel angle B-axis (max.): 101 °, No minimum price - guaranteed sale to the highest bidder! Machine with counter spindle and swiveling turntable TECHNICAL DETAILS Control system: Siemens Sinumerik 840 D X-axis travel: 550 mm Y-axis travel: 320 mm Z-axis travel: 425 mm B1 swiveling axis: 101° BT axis: 0 – 180° V-axis in working area: -40 to -496 mm V-axis outside working area: up to 570 mm Z-axis (rotary axis): approx. 450 mm Spindle data Main spindle speed: 12,000 rpm Rotary spindle: 4,000 rpm C-axis: 6,500 rpm A-axis: 4,500 rpm Speed for driven tools: 4,500 rpm Tool holder Guedowpt Akjpfx Ag Neh Main spindle tool holder: HSKA 63 Turret tool holder: Capto 4 Tool holder diameter: 63 mm Tool magazine Tool turret: 12-position with driven tools Tool changer: 32-position Additional magazine: 64-position MACHINE DETAILS Operating voltage: 400 V Frequency: 50 – 60 Hz Rated current: 125 A Connected load: 70 kVA Dimensions and weight Installation size (L x W x H): 8,565 x 5,150 x 2,750 mm Total weight: 18,000 kg EQUIPMENT - Coolant system - Breuning Simag bar loader, year 2014 - Tool measurement system - ICS with 70 bar internal cooling - Motorized safety door - Technical documentation - Manual - Continuously variable speed - Transport possible on standard truck

Condition: good (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 129-41, travel distance X-axis: 550 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 360 mm, controller manufacturer: Siemens, controller model: 840D, table width: 260 mm, table height: 540 mm, number of slots in tool magazine: 48, Equipment: chip conveyor, - Spindle 12,000 1/min - 48 tool positions in chain magazine (chain and guides replaced in 2021) Gujdpfxetyx Npj Ag Noh - HSK A63 tool holder

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, General / technical data: Offered here is a very well-preserved, fully automatic strapping system (Sinodeband strapping system) for Euro pallets. The machine is equipped with a stable roller conveyor for Euro pallets. An additional side feed unit and a scale are integrated into the roller conveyor. Gujdpfov Dl Aajx Ag Neh The system is in very good condition and can currently still be viewed with power on. The sale is ex-site, for self-disassembly! Manufacturer: OMS Group Italy (officina Meccanica Sestese S.p.A) Model: 08 RP Year of manufacture: 2018 Machine no.: 26280 Basic pallet dimensions: 1,200mm x 800mm (Euro pallet) Max. height: 1,800mm Min. height: 350mm Min. weight: 100 KG Max. weight: 1,000 kg Max. number of bindings: approx. 50/hour Cycle time: approx. 115 sec/binding including pallet positioning Space required for the machine: (w x d x h) approx. 4,000 x 10,000 x 3,700mm (with roller conveyor) Power supply/connection value: 400 volts 50 Hz/nominal current 6.5A

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 1 h, load capacity: 450 kg, lifting height: 8,000 mm, overall weight: 2,830 kg, empty load weight: 2,830 kg, fuel type: electric, tire condition: 100 %, drive condition: 100 %, maximum load weight: 450 kg, Equipment: UVV, Crawler work platform Crawler work platform CAPRI 08-10 We offer you; Crawler work platform Cabri 08-10 New machine year of construction 2024 Working height 10 meters Platform height 8 meters Machine dimensions 262x139x240 cm Load capacity platform 450kg Extension load 113kg Platform dimensions 227x 112 cm Platform extended 317x 112 cm Machine weight 2,870 kg Charger integrated in the machine 48V/25A 2 drive motors installed 2x48V/4 Kw Gradeability 25% Advantage Cabri platforms: ECU & control unit from brand manufacturer installed Improved batteries installed Fully electric operation Immisson free working stronger crawler chassis non-marking tracks Robust construction The machine weight is distributed over a large area by the light caterpillar drive chains, which reduces the ground pressure. As a result, it is ideally suited for indoor use on sensitive floors with low load-bearing capacity. Non-marking tracks that leave no traces All-terrain tracked platform, up to 25% incline Ground obstacles can be overcome Also suitable for working on uneven ground Excellent traction reinforces grip on the ground Extremely maneuverable in confined spaces Low maintenance and servicing costs thanks to AC technology This advertisement does not constitute a binding offer, it is for illustrative purposes only. All information is given in good faith. Errors, typing errors and prior sale reserved Guedepwb Hujpfx Ag Nsh You will receive an invoice with VAT shown. Shipping is possible for an extra charge.