Used Fz 37 for sale (10,131)

Condition: used, Machine has a defect in the main spindle CNC vertical machining center CHIRON type FZ 22 L high speed Machining center with CNC control FANUC Series 21-M serial no. 179-98 year of construction 1999 Travel X: 2000 mm, Y: 520 mm, Z: 630 mm Table size 2700 x 570 mm Table load 525 kg (per meter) Tool holder SK 40 (DIN 69871) Drilling capacity 35 mm Gedpfxoquhbgs Abdsil Tapping capacity M27 Tool diameter 75 mm Diameter with free secondary positions 105 mm Tool change speed tool - tool 2.0 sec. Tool change speed from chip to chip 4.8 sec. Distance spindle nose - table 190 to 820 mm Spindle speed max. 10,500 rpm Main spindle drive max. 18.5 kW Mains connection 400 Volt, 50 Hz, 32 kVA - Pendulum machining over 2 work areas (partition wall missing) - CNC control FANUC Series 21-M - Tool changer 40-fold - IKZ = internal coolant supply through the spindle - Spray protection cabin with sliding door - Indirect measuring system - Coolant device with chip conveyor opposite - Electronic handwheel Transport dimensions of the basic machine L x W x H 4600 x 2470 x 2950 mm Weight of the machine approx. 7.5 tons. Transport space requirement on the truck L x W x H 12000 x 2470 x 2950 mm Transport Weight on the truck approx. 10 ton. Weight 7.2 tons. good condition - machine has a defect on the main spindle

Condition: good (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 129-41, travel distance X-axis: 550 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 360 mm, controller manufacturer: Siemens, controller model: 840D, table width: 260 mm, table height: 540 mm, number of slots in tool magazine: 48, Equipment: chip conveyor, - Spindle 12,000 1/min - 48 tool positions in chain magazine (chain and guides replaced in 2021) Gjdetyx Npjpfx Abdeil - HSK A63 tool holder

Condition: new, maximum load weight: 12,200 kg, overall weight: 15,000 kg, loading space length: 7,005 mm, loading space width: 2,300 mm, loading space height: 2,200 mm, loading space volume: 37 m³, total width: 2,450 mm, total height: 2,450 mm, Year of construction: 2025, Brand new roll-off container for building rubble, waste etc. * Steel container in lightweight design * 50 mm support bracket * Rear doors with safety lock * Steel floor 5 mm * Right-sided access at the front * Tarpaulin holders on all sides * Capacity 37 cbm Gisdpfx Abjmxgi Hedel * Tare weight approx. 2,800 kg * Initial container inspection according to BGI 5005 Further containers in heavy-duty design DIN 30722 part with 60 mm support bracket in stock. For further information please do not hesitate to contact us

Condition: excellent (used), Year of construction: 1992, operating hours: 41,685 h, Technical specifications: Rated power, kW: 11,3 Mold area, mm: 475 x 250 Max. film width, mm: 495 Min. film width, mm: 150 Max. feed length, mm: 280 Min. feed length, mm: 50 Max. drawing depth/negative, mm: 100 Number of cycles/min.-max.: 48 Consumption of air/cycle at 6 bar: 100 Nl (net-pressurized air) Gedpfx Ajq A Um Rjbdoil Heat energy to be dissipated: with top heating ca. 10 260 KJ/h with top and bottom heating ca.: 17 715 KJ/h Special equipment: Hollow floor facility available Control cabinet: included

Year of construction: 1988, condition: good (used), A complete Atlas Copco air compressor including Donaldson Ultra Filter and a Tank in good working condition Gisdjhpx U Aspfx Abdel

Condition: new, Year of construction: 2024, max. cutting height 160 mm max. cutting width 600 mm feed rate 5-30 m/min. sawing motor 37 KW (also more KW possible) feed motor 2,2 kW max. saw blade insert at 145 mm 6 saw shaft diameter 70 mm weight 3.200 kg Special equipment Giedpfxeu I Dmo Abdol Electrical height adjustment of the infeed rollers Laser with adjustment device Driven roller gear Electronic braking device

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 425 mm, TECHNICAL DETAILS Control: Sinumerik X travel: 550 mm Y travel: 300 mm Z travel: 425 mm Rapid traverse: 30 m/min Spindle mount: ISO SK 40 Gsdowtravopfx Abdeil

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 821 kg, total length: 2,150 mm, total width: 1,430 mm, total height: 1,410 mm, Frequency-controlled 2-stage screw compressor 37 kW Working pressure -0.8 MPa (approx. 8 bar) Delivery rate 7.72 m³/min at 0.8 MPa Giodpov Ura Tofx Abdol Super soundproof

Year of construction: 2011, condition: ready for operation (used), The ultrafiltration plant is used for purification of various liquids. liquids. The membrane elements are a 37/3.8 channel design, 0.1ìm fineness and a length of 1300 mm. In each of the two modules are installed 32 ceramic rods with a total capacity of 2,000 L / h each. 1 piece construction frame,1 piece feed pump,1 piece rod heater, 2 pieces bleed pump, 1 piece cleaning tank, 1 piece membrane valve, 1 pcs compressed air diaphragm pump, 1 pcs UF ceramic module, 1 pcs tem. over. 1 piece control valve, 4 pieces pressure measurement with display, Gedpfxsf Dc D Hj Abdsil 1 piece control unit according to VDE 0110/0113 CE, 1 piece flow measurement, 1 piece pre-assembly of the plant in the factory of the contractor,

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 300-01, spindle speed (max.): 12,000 rpm, travel distance X-axis: 550 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 425 mm, number of slots in tool magazine: 108, swivel angle B-axis (max.): 101 °, No minimum price - guaranteed sale to the highest bidder! Machine with counter spindle and swiveling turntable TECHNICAL DETAILS Control system: Siemens Sinumerik 840 D X-axis travel: 550 mm Y-axis travel: 320 mm Z-axis travel: 425 mm B1 swiveling axis: 101° BT axis: 0 – 180° Gedpfxswpt Akj Abdoil V-axis in working area: -40 to -496 mm V-axis outside working area: up to 570 mm Z-axis (rotary axis): approx. 450 mm Spindle data Main spindle speed: 12,000 rpm Rotary spindle: 4,000 rpm C-axis: 6,500 rpm A-axis: 4,500 rpm Speed for driven tools: 4,500 rpm Tool holder Main spindle tool holder: HSKA 63 Turret tool holder: Capto 4 Tool holder diameter: 63 mm Tool magazine Tool turret: 12-position with driven tools Tool changer: 32-position Additional magazine: 64-position MACHINE DETAILS Operating voltage: 400 V Frequency: 50 – 60 Hz Rated current: 125 A Connected load: 70 kVA Dimensions and weight Installation size (L x W x H): 8,565 x 5,150 x 2,750 mm Total weight: 18,000 kg EQUIPMENT - Coolant system - Breuning Simag bar loader, year 2014 - Tool measurement system - ICS with 70 bar internal cooling - Motorized safety door - Technical documentation - Manual - Continuously variable speed - Transport possible on standard truck

Condition: ready for operation (used), Year of construction: 2011, X-axis: 300mm, Y-axis: 250mm, Z-axis: 250mm, rapid traverse (X/Y/Z): 40/40/60m/min, chip-to-chip time: 1.5s, clamping surface dimensions: 2x 550x300mm, max. spindle speed: 15,000/min, torque: 23Nm, tool holder: HSK-A32, number of tools: 12, tool changer: CHIRON basket changer, control: GE Fanuc Series oi-MC. An on-site inspection is possible. Gedpfx Ajw T Su Ssbdsil

Condition: new, Year of construction: 2024, max. cutting height 160 mm max. cutting width 600 mm min./max. trimming width 25-300 mm Giodpfxevdcc Rs Abdsl Adjustment times of the widths 0.2-1.0 sec. Feed rate 5-30 (70) m/min. Saw motor 37 KW Feed motor 2.2 kW Electric height adjustment of the top rollers 2 lasers Splitting wedges in the machine Fixed bush Adjusting bush Cutting width display Automatic width adjustment Saw shaft diameter 70 mm Weight 3.500 kg Available at short notice

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Initial commissioning: 2000 Control system: Heidenhain TNC 430 M Machine hours: 111,500 h X-axis: approx. 4,000 mm Y-axis: approx. 2,360 mm Z-axis: approx. 1,250 mm A-axis: ±110° C-axis: ±300° Clamping table Clamping surface: approx. 6,000 x 2,000 x 420 mm T-slot spacing: 18H12 / 250 mm Max. table load: 30,000 kg/m² 2-axis milling head AC3 Spindle power: 25 kW Spindle speed: max. 15,000 rpm Torque: 80 Nm Tool holder: HSK 63A Tool clamping: hydraulic Spindle freshly overhauled at the end of 2024! Linear axis drives Feed rate X, Y axis: up to 20 m/min Feed rate Z axis: up to 20 m/min Axis acceleration X, Y, Z: up to 1.5 m/s² Connection data Connected load: 40 kW Main fuse: approx. 80 A Giedpfx Ajw Rl S Ssbdol Dimensions & weights Machine footprint with peripherals: approx. 8,500 x 5,600 x 4,945 mm Total weight: approx. 18,000 kg Colour Enclosure, gantry, control cabinet: light grey Milling head and applications: green Additional equipment - 3-sided enclosure, without extraction ducts - The additional clamping table shown is not included in the scope of supply Condition of the machine Fully functional, in very good condition. Machine remains connected and is available immediately.

Condition: used, Year of construction: 2019, System for split dimensions. Gjdpfx Aewvabtebdsil Can cut shapes and models. Laser scanner, breaking bars, tiltable table. Working height: 900 mm. Height from floor to upper edge of cutting bridge: 1450 mm. Length: 4450 mm. Width: 2950 mm. Height: 900 mm. Condition: very good.

Condition: used, mileage: 1,063,201 km, power: 188 kW (255.61 HP), first registration: 10/1978, fuel type: diesel, number of seats: 37, gearing type: mechanical, color: blue, Equipment: bathroom, +++Differential taxation+++ +++Vintage car++ Engine: Mercedes-Benz Mileage according to speedometer Gearbox: 6-speed manual Seats: 35+1+1 sleeping seats with lap belts (front only) Passenger compartment Luggage racks * Jet ventilation * Reading lights * Double glazing * Refrigerator * Central toilet * Tour guide microphone * Driver microphone Exterior Trailer hitch * Tachograph with window * Sun visor * Ski case eyelets * Roof hatches, fans, roof vents Audio and communication Radio / cassette Other Vehicle dimensions: Length 9.20 m, width 2.50 m, height 3.25 m * German vehicle documents * Hubcaps * Twin tires * Front tires approx. 30% ? HA approx. 50% * Our internal vehicle number: 9928 Gisdpfx Asrc Dvxsbdjl Errors excepted. Images and text may differ from the vehicle. Over 300 vehicles always on offer.

Condition: used, Year of construction: 2008, BOTTERO 520 LAM-37 - Year 2008 Cutting table for laminated glass Fixed worktop with flap Air cushion support Max. cutting length: 3700 mm Min. cutting length: 250 mm Thickness: 3-10 mm (monolithic) 2+0.38+2 mm min. (laminated) Godpfx Aexqyu Tobdsil 8+4.56+8 mm max. (laminated) Speed: 100 m/min Installed power: 15 kW

Year of construction: 2008, condition: ready for operation (used), A 5-axis CNC milling machine Geiss with full encapsulation is available. Travel X/Y/Z: 2500mm/2200mm/760mm, tool holder: ER25, spindle power: 11kW, milling head type: orthogonal milling head, control: Siemens Sinumerik 840 Di solution line. Documentation available. On-site inspection is possible. Gedpswih Alefx Abdsil

Condition: repair required (used), Year of construction: 2009, functionality: not functional, machine/vehicle number: 281-09, Technical Characteristics: # Machining Workspace: X 550 mm; Y 400 mm; Z 360 mm # Axis Description: 3 linear axes (X, Y, Z) + rotary table axis A and 2 rotary axes B, equipped with an index divider head with direct angular measuring system, max. rotation speed 50 min⁻¹, accuracy +/- 5" # Axis A swivel: +/-110˚ # Max. clamping/part dimensions: Ø 247 x 830 mm; max. weight 360 kg # Rapid traverse: X/Y/Z 40/40/40 m/min # Distance between divider heads B1/B2: 250 mm # Spindle speed: 1-10,000 rpm # Spindle interface: DIN69893-HSK-A63 (with internal coolant supply) # Automatic tool changer: 1x48 tools / chip-to-chip time approx. 2.5 sec # Max. tool diameter: Ø 82 mm / max. length 250 mm / max. weight 5 kg Electrical Connection: # Voltage: 3x400V/50Hz Gisdpfoxwmvkex Abdol # Total installed power: approx. 45 kVA / 80A Dimensions: # Installation footprint: approx. 4.4 x 2.3 x 3.1 m # Weight: approx. 8,500 kg Equipment Includes: # CNC control: Siemens 840D Power Line # Chip extractor: Spring Knoll # Oil cooling system # High-pressure oil filtration system, up to 80 Bar: Knoll HL 450/1200 # Cooling system for spindle, linear guides, and control cabinet # 2 independent oil lubrication systems # Oil vapor extraction/recovery system: LTA AC3002 # Fire suppression system: Kraft & Bauer # Part presence detection: with low-pressure air sensors # In-process measurement: Marposs T25 # Tool breakage detection: Blum Novotech # Tool holder detection system in spindle # Documentation: incomplete Machine Condition: NOT OPERATIONAL # Hydraulic oil leakage at Peiseler rotary table # New hydraulic pump available in stock

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, operating hours of spindle: 4,486 h, Initial commissioning: 2002 Control system: Fidia C20 with HPX operator panel Machine hours: 146,161 h X-axis: approx. 3,000 mm Y-axis: approx. 2,360 mm Z-axis: approx. 1,500 mm A-axis: ± 105° C-axis: ± 300° Clamping table Clamping surface: approx. 5,000 x 2,000 x 400 mm T-slot spacing: 18H12 / 250 mm Table load capacity: 15,000 kg/m² 2-axis milling head AC3 (2003) Gisdpfx Absw Au H Rjdol Spindle power: 28 kW Spindle speed: max. 18,000 rpm Torque: 90 Nm Tool holder: HSK 63A Tool clamping: hydraulic Minimum quantity lubrication: external Linear axis drives Feed rate X, Y-axis: up to 20 m/min Feed rate Z-axis: up to 20 m/min Axis acceleration X, Y, Z-axis: up to 1.5 m/s² Electrical connections Connected load: 40 kW Main fuse: approx. 80 A Dimensions, weights Space requirement machine including peripherals: approx. 7,300 x 5,600 x 5,600 mm Total weight: approx. 16,500 kg Colour Enclosure, gantry, control cabinet: light grey Milling head and applications: turquoise Additional equipment - 18-position chain-type tool changer - 3-sided enclosure, without extraction ducts Condition of the machine Fully operational, very good condition. Dismantled, stored and immediately available.

Condition: used, mileage: 458,862 km, power: 206 kW (280.08 HP), first registration: 11/2009, fuel type: diesel, number of seats: 32, gearing type: automatic, emission class: euro5, color: white, brakes: retarder, Equipment: ABS, parking heater, +++Original KM+++ Engine: Scania Emission class: EEV Gearbox: Automatic Seats: 28+3+1 high/fixed Safety * Retarder * ABS, EBS * Fog lights Passenger compartment * Auxiliary heating * Driver microphone * Stroller space * Wheelchair RAMP * Wheelchair space * Stop request Exterior * Matrix Lawo * Double-width door 2x * Raising/lowering system * Power steering * Tachograph with card * Sun visor * Electric exterior mirrors * Roof hatches Audio [&] communication * Radio * CD * USB on radio Other * German vehicle registration document * Vehicle dimensions: length 10.88 m, width 2.55 m, height 2.98 m Giedpfx Aov Dcwusbdel * Twin tires * Tires: VA 40%, HA 30% Our internal vehicle number: 11316 Errors excepted. Images and text may differ from the vehicle. Over 300 other vehicles always on offer.

Condition: ready for operation (used), Year of construction: 2005, A machining center is available. Travel X/Y/Z: 550mm/400mm/425mm, A-axis: +/-100°, rapid traverse: 40m/min, speed: 10500rpm, tool positions: 20, tool holder: SK40, table load: 300kg, control: Siemens Sinumerik. The screen of the machine is defective. Documentation available. On-site inspection is possible. Giedpfjwxfa Hsx Abdsl

Condition: excellent (used), Year of construction: 2014, First commissioning: 2014 Control: Heidenhain iTNC 530 HSCI including HR 520 handwheel Machine hours Power-on hours: approx. 90,000 h Spindle hours: approx. 38,000 h Current milling spindle hours: approx. 900 h Travel distances X-axis: approx. 2,500 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,250 mm A-axis: ± 110° C-axis: ± 300° Gsdpfswywciex Abdsil Clamping table Clamping surface: approx. 2,500 x 3,250 x 600 mm 2-axis milling head VH30 Spindle power: 60 kW Spindle speed: max. 22,000 rpm Torque: 95 Nm Tool holder: HSK 63A Tool clamping: hydraulic Coolant supply: external and internal Linear axis drives Feed speed X/Y/Z-axis: up to 60 m/min Axis acceleration X/Y/Z-axis: up to 5 m/s² Electrical specifications Connected load: 190 kVA Main fuse: approx. 315 A Dimensions, weights Space requirement (machine with peripherals): approx. 10,000 x 8,000 x 5,650 mm Total weight: approx. 63,000 kg Colour Enclosure, portal, control cabinet: RAL 7035 light grey Milling head and applications: RAL 6038 luminous green Description: Additional equipment - Coolant supply with belt filter system - 50-position chain-type tool changer - Work area enclosure - Chip conveyor - Emulsion mist extraction system from LTA Optional at extra cost: - Renishaw RMP60 wireless measuring probe - BLUM Control NT Condition of the machine Fully functional, in excellent condition and available for inspection under power! Images are sample photos from a new machine of this type. Original images to follow shortly!

Year of construction: 2006, condition: ready for operation (used), Travel X/Y/Z: 12100mm/2350mm/800mm, swivel A-axis: +/-98°, rapid traverse X/Y/Z/A: 45/45/24/10 m/min, processing length: 11000mm, speed: 24000 rpm, table: 10 support crossbars, 2 hydraulically swiveling workpiece stops, control: BWO 930, operating hours: 23792h, dimensions X/Y: 18300mm/6250mm. Including moving gantry version with Gentry drive on both sides, coolant spraying system with minimum quantity fine atomization. Documentation available. Gisdpfxetqfqxe Abdel

Condition: excellent (used), Year of construction: 2012, First commissioned: 2012 Control: Heidenhain iTNC 530 including handwheel HR 420 X-axis: approx. 5,000 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,500 mm A-axis: ± 110° C-axis: ± 300° Clamping table Gsdsvy A Tnjpfx Abdjil Clamping surface: approx. 5,700 x 3,000 x 300 mm 2-axis milling head VH20 Spindle power: 40 kW Spindle speed: max. 25,000 min-1 Torque: 48 Nm Tool holder: HSK 63A Tool clamping: hydraulic Coolant supply: external and internal Blowing air: external Drives linear axes Feed rate X, Y axis: up to 50 m/min Feed speed Z-axis: up to 30 m/min Axis acceleration X-, Y-, Z-axis: up to 2.5 m/s2 Connection data Connection power: 190 kVa Back-up fuse: approx. 315 A Dimensions, weights Space requirement machine with peripherals: approx. 10,000 x 7,700 x 5,850 mm Total weight: approx. 63,000 kg Color Housing, portal, control cabinet: RAL 7035 light gray Milling head and applications: RAL 6038 bright green Additional equipment - Coolant supply with belt filter system - 30-way chain tool changer - Work area cover - Chip conveyor, right side Optional for an additional charge: - BLUM laser Condition of the machine Fully functional, very good condition. Already dismantled and stored.

Year of construction: 1988, condition: ready for operation (used), Verfahrweg X/Y/Z: ca. 1600mm/400mm/425mm, Tischdimensionen X/Y: 1500mm/400mm, Werkzeugaufnahme: SK40, Werkzeugplätze: 20, Spindeldrehzahl: 5000U/min, Maschinendimensionen X/Y/Z: ca. 4000mm/2500mm/2900mm, Gewicht: ca. 7000kg, Steuerung: Siemens Sinumerik System 3, Betriebsstunden: ca. 19855h. Inklusive ca. 12 Werkzeughalter. Documentation available. Eine Besichtigung vor Ort ist möglich. Gijdpfx Abjwaa Inodsl