Used Fz 37 for sale (3,297)

Condition: like new (used), Year of construction: 2022, functionality: fully functional, Equipment: documentation/manual, refrigerant dryer, type plate available, Container includes the following contents: - 10ft storage container, new / Color: Anthracite grey - SSC-Strong 37 Vario • Speed-controlled screw compressor • Free air delivery at 8 bar: 6.3 m³/min • Dimensions (LxWxH): 1432 x 1000 x 1480 mm • Weight: 705 kg - 2 compressed air tanks, 500 l each o With AD2000 certification Iijdpfx Amsxc T Eve Deh o Horizontal design - 2 Ecomat 31 condensate drains - 2 sets of fittings - SCC refrigerant dryer DRA480 o ISO 8573-1 Class 4 o Refrigerant: R407C o Capacity: 480 m³ - Pre-filter FIL934-P - Fine filter FIL934-M The compressor has seen very little use and therefore has low operating hours. Upon request, we can read the operating hours and run the compressor for demonstration.

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, Equipment: documentation/manual, Decommissioned 07.2026 as unnecessary Iodpfsznk Rmsx Am Djih

Condition: used, mileage: 474,988 km, power: 213 kW (289.60 HP), first registration: 11/2012, fuel type: diesel, number of seats: 38, gearing type: automatic, next inspection (TÜV): 04/2027, emission class: euro5, color: white, brakes: retarder, Equipment: ABS, electronic stability program (ESP), soot filter, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle, subject to finalization, errors, typographical errors, and prior sale: MAN Lions City LE A78, 38+37+1+2 emergency seats (Vehicle 114) First registered: November 29, 2012 474,988 km Engine: 6,871 cc 213 kW / 289 hp Euro 5 EEV MOT valid until 10/2026, technical inspection valid until 04/2027 Permissible total weight 19,500 kg, unladen weight 10,570 kg, payload 8,930 kg Overall length 11,895 mm x overall width 2,550 mm x overall height 3,160 mm Ijdpfx Ajz E Abcem Djih Double doors at the front and rear Driver's cab with door 38+2 emergency seats + 37+1 Folding ramp Auxiliary heater + 2nd heater Retarder Fully automatic transmission Microwave oven 2 x electric mirrors + mirror heating 12-volt socket Emergency exit Stop brake Driver's seat ISRI with heating and ventilation Lawo system via IBIS cash register Tires 275/70R22.5, front approx. 80%, rear approx. 40%, front steer axle approx. 40/40% Minor damage on the driver's side rear Various signs of wear, consistent with the age Good overall condition Last inspection at 448,003 km, next inspection at 508,003 km Price: €11,500.00 (net) All information without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties, for disputes up to a value of €10,000, is the Ludwigslust District Court; for disputes exceeding this value, it is the Schwerin Regional Court. Subject to errors, typographical errors, and prior sale.

Condition: ready for operation (used), Year of construction: 2013, Two Geiss CNC machining centers are available. 1) Geiss FZ 2000x1000, year of manufacture: 2012, travel path X/Y/Z: 2450mm/1400mm/800mm, B-axis: 285°, C-axis: 520°, speed: 30000rpm, table dimensions X/Y: 2000mm/1000mm, machine dimensions Y/Z: 2500mm/2450mm, weight: approx. 30500kg. 2) Geiss FZ 2800x1000, year of manufacture: 2013, table dimensions X/Y: 2800mm/2000mm, weight: approx. 42000kg. The Geiss machine with the year of manufacture 2013 has spindle problems. A cost estimate is available for this. The repair can be carried out before the sale or by the buyer. Documentation available. An on-site inspection is possible. Individual sale possible. Iiedpfx Ajy Ant Rsm Doh

Condition: reconditioned (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 420 mm, rapid traverse X-axis: 75 m/min, rapid traverse Y-axis: 75 m/min, rapid traverse Z-axis: 75 m/min, torque: 90 Nm, controller manufacturer: FANUC, controller model: series 31i-B5, rotational speed (max.): 24,000 rpm, tool length: 200 mm, tool diameter: 60 mm, tool weight: 4,000 g, input voltage: 400 V, type of input current: three-phase, number of tool turrets: 1, number of tool stations in tool turret 1: 12, number of driven tool stations in tool turret 1: 12, Equipment: chip conveyor, CNC Machining Center CHIRON FZ12 MT TECHNICAL CHARACTERISTICS: Year of manufacturing: 2013 CNC control: FANUC series 31i-B5 Stroke X axis: 550 [mm] Stroke Y axis: 320 [mm] Iiedpfx Aszqbdijm Dsh Stroke Z axis: 420 [mm] Traversing feeds X, Y and Z axes: 75000 [mm/min] X/Y/Z axis acceleration: 10/12/15 [m/s] Max. bar diameter in turning spindle: 32 [mm] Main spindle max. speed: 8000 [rpm] Max. turning spindle torque: 90 [Nm] Max. counter spindle speed: 6500 [rpm] Counter spindle torque: 14.3 [Nm] Tool changer magazin number of stations: 24 Max. tool lenght: 200 [mm] Max. weight of single tool: 4 [Kg] Max. tool diameter: 60 [mm] Number of tool stations: 12 Number of tool stations driven: 12 Max. speed driven tools: 5000 [rpm] Milling head spindle attachment: HSK-A 50 Stroke B axis: -10 [°] / +100 Max. milling spindle speed: 24000 [rpm] Max. milling spindle power: 36 [kW] Max. milling spindle torque: 29 [Nm] Tool change time: 0.9 [sec] Chip to chip time: 2.4 [sec] Rated current: 125 [A] Total power required: 85 [kVA] Supply voltage: 400 [V] INCLUDED EQUIPMENT: 1 × High Speed Plus package 1 × LNS QUICK LOAD SERVO 80 S2 bar feeder 1 × KNOLL KF 150/500 paper band filtration unit 1 × 40 bar high-pressure coolant system 1 × Oil cooling unit 1 × KNOLL 600 K-1/200 chip conveyor 1 × RENISHAW workpiece probe 1 × RENISHAW TS27R tool setter 1 × ELBARON oil mist extraction unit Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machine similar to Mikron, Hermle, DMG MORI, Mazak, Hedelius, AXA, Chiron, Matec, Reiden, Lagun, Haas and Alzmetall, as well as CNC milling, drilling and tapping machines, and CNC grinding machines.

Condition: used, mileage: 926,538 km, power: 210 kW (285.52 HP), first registration: 09/2006, fuel type: diesel, number of seats: 37, gearing type: automatic, next inspection (TÜV): 04/2027, emission class: euro5, color: red, brakes: retarder, Equipment: ABS, electronic stability program (ESP), soot filter, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle on a non-binding basis, subject to final sale, errors, typographical errors, and prior sale: Mercedes Benz Citaro (emergency seats) (Vehicle 155) First registration: 08.09.2006 926,538 km Engine: 6,374 cc 210 kW / 286 hp Euro 5 EEV MOT valid until 01/2027, technical inspection valid until 10/2026 Permissible gross vehicle weight: 19,000 kg, unladen weight: 11,340 kg, payload: 7,660 kg Overall length: 12,000 mm x overall width: 2,550 mm x overall height: 3,100 mm Tires: 275/70R22.5, front: 80% remaining tread, rear: approximately 30/30% remaining tread, inner tires: approximately 40/40% remaining tread Iijdpfx Amez H Ecro Doh Double doors at the front and rear Driver's cab with door Ramp Fully automatic transmission Microwave Manual windows 2 x electric and heated mirrors Auxiliary heating + 2nd heating Retarder Stop brake LAWO system connected to the cash register Emergency stop 12-volt socket Tie rods corroded 14.02.2024: Alternator tensioner replaced, 07.05.2025: Radiator replaced, water pump sealed, 07.04.2026: Upper control arms on the front axle (left and right) replaced, 26.07.2024: Brakes and discs on the front axle replaced, both brake chambers on the front axle replaced, 29.10.2024: Pressure switch for the air system, circuit 1+2, replaced with air line, 24.01.2025: Four-circuit pressure valve replaced Various signs of wear and tear, consistent with the vehicle's age Last inspection: 21.01.2025 at 873,162 km, next inspection due at 933,162 km Price: 3,000.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to a value of €10,000 is the district court of Ludwigslust; for disputes exceeding this value, it is the regional court of Schwerin. Errors, typographical errors, and prior sale are reserved.

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: 213-65, Verfahrweg X-Achse: 300 mm Verfahrweg Y-Achse: 250 mm Verfahrweg Z-Achse: 250 mm Werkstückgewicht (max.):1 kg Anzahl der Werkzeugplätze：12 Pos Steuerungshersteller:Fanuc Isdpfx Ajywmziom Deih Steuerungsmodell: 21m 3x / 2x 21iM Kühlmittelzufuhr:1 bar Anzahl der Spindeln:1 Eilgang Z-Achse: 60 m/min Eilgang X-Achse: 40 m/min Eilgang Y-Achse: 40 m/min Drehzahl (max.): 10.000 U/min Werkstückdurchmesser (max.): 63 mm 4.Achse Peiseler AWU P100 die Maschinen wurden 2016 durch Chiron CMS überholt Ausstattung: Dokumentation/Handbuch, Drehzahl stufenlos einstellbar Die Maschine befindet sich unserer Einschätzung nach in einem guten gebrauchten Zustand und kann nach Terminvereinbarung unter Strom besichtigt werden.

Condition: excellent (used), Year of construction: 2019, S016950 PROD. ALUP TYPE LARGO37 Isdpfx Amjzuc S Ao Djih S/N API588037 YEAR 2019 POWER (kW) 37 CAPACITY (m3/min) 6.66 DISCHARGE PRESSURE (bar) 7.5 HOURS (RUNNING/TOTAL) FREQUENCY CONVERTER no BUILT-IN DRYER no HEAT EXCHANGER no COOLED BY (AIR/WATER) air ON-TANK MOUNTED no DOCUMENTS no CONNECTION 1 1/2 NEW/USED USED WARRANTY ON THE SCREW COMPRESSOR STAGE - 6 MONTHS!!!

Condition: excellent (used), Year of construction: 2020, Unique opportunity to purchase this high quality CHIRON 5-axis machining center for profiles. Built and first use in 2020. The spindle was replaced in June 2022 and currently has 4500 operation hours. Machine is in very good condition and it can be inspected under power upon appointment. Availability: on request Including: Chip conveyor (scraper type) Profile bar feeder for bar lengths up to 6 m, for guiding profiles up to Ø 212 mm Coolant system TPF 350 / FKA 900 Coolant through the spindle Fixed 3D probe Type TS 27 R – RENISHAW Iiedpfx Ameyt I Uhs Doh Renishaw RLP40Q probe system Cnc control SIEMENS 840D X-axis 730 mm Y-axis 400 mm Z-axis 425 mm Maximum spindle speed 15,000 rpm Maximum torque 140 Nm Drilling capacity Ø 42 mm Thread tapping M30 Tool magazine capacity 20 tools Tool taper DIN 69893 HSK A63 Maximum tool diameter 65 mm Milling capacity 500 cm³/min in E355 steel Full technincal specifications in the attached document. Optional: ARMIN automatic robot cell (2024)

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 183-89, CNC Vertical Machining Center Make: CHIRON Group Model: CHIRON FZ 12 W Year of manufacture: 1999 Iijdpfxjy Sr Ikj Am Dsh Machine No.: 183-89 Typical technical specifications of the CHIRON FZ 12 W: Machine type: Control system: usually Siemens 840D or Heidenhain X-axis travel: approx. 550 mm Y-axis travel: approx. 300 mm Z-axis travel: approx. 425 mm Table size: approx. 660 × 350 mm Table load capacity: approx. 500 kg Spindle speed: depending on version, 10,000 – 20,000 rpm Tool holder: SK40 or HSK-A63 Tool changer: 12–24 positions Rapid traverse: up to 60 m/min Main spindle power: approx. 10–15 kW Coolant system Central lubrication Fully enclosed safety cabin Machine weight: approx. 4,500–5,500 kg The machine is part of CHIRON's well-known FZ series and is especially suited for high-speed aluminum and steel machining.

Condition: used, Year of construction: 1997, functionality: fully functional, Weima WLH 6S/37 wood chipper/shredder Rotor length: 800 mm Number of knives: 42 Rotor speed: approx. 300 rpm Rotor diameter: 368 mm Iodpfx Aozzvfvom Doih Number of screens with 20 mm diameter holes Main motor power: 37 kW Technical documentation and CE certificate included Vibratory feeder with a length of 365 cm Year of manufacture: 1997

Condition: refurbished (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 1216, total width: 4,000 mm, total length: 4,500 mm, total height: 1,150 mm, overall weight: 2,600 kg, compressed air connection: 6 bar, pressure: 6 bar, cutting length (max.): 3,700 mm, VSG cutting table M 37 incl. support Cuts from 6-16 mm Iiedpoxg Ii Refx Am Doh Pneumatics new, heating lamp new, felt new, machine comes with a service contract! If interested, we can also provide additional pictures and videos.

Condition: ready for operation (used), Year of construction: 1999, Chiron FZ 12 W High Speed Year: 1999 Control: Siemens Sinumerik Type: Vertical machining center with pallet changer Axes travel X axis: approx. 550 mm Y axis: approx. 300 mm Z axis: approx. 425 mm Spindle Spindle taper: SK40 Spindle speed: approx. 10,000 to 10,500 rpm Spindle motor power: approx. 9 to 15 kW Tool system Tool changer capacity: approx. 12 to 20 positions Max tool weight: approx. 4 kg Tool holder: SK40 Table Table size: approx. 660 x 350 mm Max workpiece weight: approx. 150 kg Table type: pallet changer system Electrical data Voltage: 400 V or 230 V Frequency: 50 to 60 Hz Power consumption: approx. 11 kVA Current: approx. 15 A Machine dimensions and weight Weight: approx. 4000 kg Length: approx. 3000 to 3500 mm Isdpsy E Ihgjfx Am Deih Width: approx. 2500 to 3000 mm Height: approx. 2500 to 3000 mm Coolant system Manufacturer: Knoll Type: 340 K 1 600 Year: 1999

Condition: refurbished (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 7,000 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 2,000 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 30 m/min, spindle speed (max.): 18,000 rpm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 30 m/min, torque: 38 Nm, overall weight: 65,000 kg, Initial commissioning: 2012 Control system: Heidenhain iTNC 530 X-axis: approx. 7,000 mm Y-axis: approx. 3,500 mm Z-axis: approx. 2,000 mm A-axis: ± 100° C-axis: ± 360° Clamping table: 6,000 x 3,000 x 160 mm (sunken) with 18H12 T-slots / 250 mm spacing Iisdpfx Aeyrdc Eom Deh 2-axis milling head VH 12 Spindle power: 24 kW Spindle speed: max. 18,000 rpm Torque: max. 38 Nm Tool holder: HSK 63A Linear axis drives Feed rate X, Y, Z axes: up to 50 m/min / 30 m/min Axis acceleration X, Y, Z axes: up to 2.5 m/s² Connection data Voltage: 400 V Frequency: 50 Hz Main fuse: 200 A Power consumption: 85 kVA Dimensions, weights Machine footprint without peripherals: approx. 10,000 x 6,650 x 5,900 mm Total weight: approx. 65,000 kg Additional equipment - Double-sided access doors - 10-position tool changer Optional at extra cost: - Wireless probe - Heidenhain remote diagnostics Machine condition Fully functional, very good condition. Can be inspected under power. !!! The machine was completely mechanically overhauled in 2022 !!!

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 310 mm, General: Spindle speed: 15,000 rpm Power: 7.3 kW Tool interface: HSK-A 40 Tool changer: 40 stations Iiodpfx Amozf Admo Djh Control system: Siemens 840 DsL Working area Travel in X: 450 mm Travel in Y: 270 mm Travel in Z: 310 mm Rapid traverse (X/Y/Z): 75 m/min A-axis Swivel angle: +/- 120° System accuracy: +/- 5" Drive: Torque motor Spindle speed: 100 rpm C-axis Diameter of rotary table: 198 mm System accuracy: +/- 5" Drive: Torque motor Spindle speed: 200 rpm Equipment Rotary union: 6-pole, integrated in A and C axes Chip conveyor: Drag chain, discharge height 490 mm, rear

Condition: good (used), Year of construction: 2013, overall weight: 560 kg, Pump technical data: • Manufacturer: KSB • Type: ETIC D 65 / 45-1 • Capacity: Q = 45 m³/h • Head: H = 182.19 m • Year of manufacture: 2013 • Flange connections (visually DN150 – as shown in photos) • Solid, industrial construction • Pump dismantled from an industrial installation Electric motor: • Manufacturer: Siemens • Power: 37 kW • Supply: 3-phase • Speed: approx. 2950 rpm (50 Hz) • Industrial design, IC411 cooling • Mounting: IM B3 • Motor mounted on frame together with pump Condition: • Technical condition: used • Visually normal signs of use, no cracks or damage to the housing • Shafts and flanges complete (visible in the photos) • Sold as a set: pump + motor + frame Additional information: Iiodpfxoz Slnbj Am Doh • Ideal for industrial applications: process installations, energy, chemical, process water • Price quoted per unit.

Condition: used, mileage: 29,224 km, power: 132 kW (179.47 HP), first registration: 01/2016, fuel type: diesel, overall weight: 7,490 kg, color: blue, gearing type: mechanical, emission class: euro6, Equipment: ABS, air conditioning, central locking, crane, soot filter, MAN 7.180 TGL with Böcker roofing crane up to 37 m 37-4000 Suspension: Leaf spring / Leaf spring Wheelbase: 3.90 m Böcker Crane Type: AK/4000 Year of manufacture: 2016 4x Hydraulic outriggers 4905 operating hours + Remote control + Work platform Special equipment: End crossbeam, Trailer socket 12V / 24V, Anti-slip control (ASR), Exterior mirrors, electrically adjustable and heated, Wide-angle mirror, heated, Curb mirror, right, electrically adjustable and heated, Compressed air tank, aluminum, Driver's seat, comfort, air-sprung, Flame-start system, Transmission shift lock, pneumatic, Rear plastic fender (full cover), Stabilization package for high center of gravity, Iedpfxez Ec A He Am Dsih Cab socket 12V and 24V, Control module for external data exchange, Central locking Additional equipment: Axle configuration: 4x2, Approach/front mirrors, Indicator for seat belt, left, Audio system: Radio MAN basic Line (Radio / CD), Exterior mirror, wide-angle, left, Exterior mirror, wide-angle, right, Battery 88 Ah, On-board computer MAN-Tronic, Compressed air connection, front, Electronic braking system MAN-Brakematic, EURO 6 engine, Cab: C (Compact), Suspension: Leaf spring / Leaf spring, Electric windows, Windshield, tinted, Generator 28 V 80 A, Transmission, 6-speed - Type: ZF S6 - 800 OD, Fuel filter, heated, Fuel tank: Combined tank, plastic - 100 liters diesel + 10 liters urea solution (AdBlue), Steering column (steering wheel), adjustable, Air intake, elevated, Dry air filter behind cab, Engine 4.6 L - 132 kW Diesel (D 0834), Engine brake, Spare wheel carrier behind rear axle, Disc brake, rear axle, Disc brake, front axle, Mud flaps, front, Bumper, plastic design, Door windows, tinted, Rear underrun protection, Viscous fan, Front axle VOK-03, angled, Permissible total weight 7.49 t We will also be happy to assist you with financing/leasing options through our partners. All information is without guarantee. Subject to change and prior sale.

Condition: used, Year of construction: 2016, operating hours: 3,318 h, Equipment: all wheel drive, * Enclosed cabin * Quick-change system * Bucket Ijdoz E Uhuepfx Am Djih * Fork * Rotating beacon ----Vehicle number: 12486----Errors and prior sale excepted----Advertisements and various markings have been digitally removed.----We are happy to assist you with all the formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of everything. Among other things, we can offer you the following services for an additional fee:----Trade-in of your old vehicle, TÜV/SP inspection, complete export processing, assistance with financing, application for export license plates, vehicle transportation, vehicle registration, recovery and vehicle transport.----?YOUR VTS TEAM

Condition: used, maximum load weight: 42,400 kg, overall weight: 64,000 kg, axle configuration: > 3 axles, first registration: 01/2011, Equipment: ABS, Goldhofer STZ-VLS4-37/80 and Goldhofer Dolly SX 1-25/80 - Height-adjustable low bed with removable gooseneck ----* Manufacturer: Goldhofer * Type: STZ-VLS4-37/80 * First registered: 01/2011 * Color: yellow * Total weight: 64,000 kg * Empty weight according to vehicle registration document: 21,600 kg * Axles: 4x BPW axles, of which 1st axle is steered via turntable steering, the remaining 3x axles are hydromechanical forced steering * Steering knuckle axles up to max. 45 degrees * Tires: 235/75 R17.5 approx. 70% * Suspension: Air suspension with lifting and lowering * EBS Wabco * Removable gooseneck with aluminum side walls * Hydraulic cylinders for support on the tractor unit * Toolbox with flap at the front of the gooseneck * Controls and pressure gauge on the left of the gooseneck * Gooseneck designed for freely rotating 1-axle dollies * Low bed for the chassis can be raised and lowered hydraulically * Chassis with excavator trough (starts from the 2nd axle) * Extendable widening of the loading area 440mm (2x 220mm) and 700mm (2x 350mm) * Wooden planks to bridge the gap between the widenings * Air suspension with raising and lowering to min. 825mm to 1,025mm (no driving position) * 2x fixed driving heights: * 1st driving height 925mm +100mm/-100mm * 2nd driving height 885mm +100mm/-100mm * 2 pairs of retractable lashing eyes in the gooseneck floor * 5 pairs of retractable lashing eyes in the low bed floor * 5 pairs of side lashing eyes on the low bed chassis * 4 pairs of stake holes in the low bed floor * 3 pairs of retractable lashing eyes in the chassis floor * 2 pairs of side lashing eyes on the chassis chassis * 2 pairs of stake holes in the chassis floor * 2x lashing eyes in the excavator trough * Rear of the vehicle sloped 10 degrees * 1-part hydraulic ramps (2,850mm x 720mm) and hydraulic supports at the rear * Operation of hydraulic ramps + supports at the rear left * Smartboard at the rear right * Additional LED reversing lights on the gooseneck and at the rear of the low loader * 1st hand German vehicle!! German papers!! 1st hand!! Iiedpfex Suzaox Am Doh Goldhofer SX 1-25/80 Dolly ----* Manufacturer: Goldhofer * Type: SX 1-25/80 * First registered: 03/2011 * Color: Yellow * Total weight: 28,000 kg * Empty weight according to vehicle registration document: 2,750 kg * Axles: 1x BPW axle * Tires: 235/75 R17.5 approx. 70% / twin tires * 3" fifth wheel plate * Single fender * Supports * Loading manometer * 1st hand German vehicle!! German papers!!

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 425 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, torque: 90 Nm, controller manufacturer: Siemens, controller model: 840D PL, overall weight: 10,000 kg, spindle speed (max.): 12,000 rpm, coolant supply: 25 bar, number of spindles: 1, number of slots in tool magazine: 20, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We are Chiron experts. The machine is currently being partially overhauled and is in very good condition. If a probe or another option is needed, we can gladly provide it for an additional charge. FZ15W with 4th and 5th axis Machine dimensions: approx. 4200mm x 2400mm Travel range -X = 730mm -Y = 400mm -Z = 425mm Control: 840D Powerline Main spindle: -Speed: 12,000 rpm -Tool holder: SK40 -Torque: max. 90NM Tool changer -Tool places: 20 Iedpewpcfuofx Am Dsih Workpiece changer -Peiseler table with Afrocontroller Chip conveyor Coolant system with internal and external cooling Hydraulic clamping device Complete documentation available Geometry tip-top HS runout 0.008mm QC20 measurement 12.6µm (Manufacturer's tolerance 18µm, new machine 23µm, used machine) The machine can be inspected under power.

Condition: used, Year of construction: 2001, travel distance X-axis: 550 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 360 mm, nominal power (apparent): 47 kVA, rotational speed (min.): 20 rpm, rotational speed (max.): 12,000 rpm, overall weight: 8,700 kg, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, We offer this used Chiron FZ 15K S machine, manufactured in 2001. CNC control: Fanuc Series 18i 2-axis rotary table (A and C axes) 48-position tool changer Chip conveyor Coolant unit X-axis travel / X-axis stroke: 550 mm Y-axis travel / Y-axis stroke: 400 mm Z-axis travel / Z-axis stroke: 360 mm C-axis / C-axis: 360° A-axis / A-axis: +-100° Spindle taper: HSK A63 Weight: approximately 8700 kg Spindle speed: 20-12000 rpm Isdpfezyyqyjx Am Djih If you have any questions or require further information, please send a message or contact us by phone.

Condition: good (used), Precision lathe Scherer Feinbau PM 1 FZ Precision lathe Scherer Feinbau PM 1 FZ, finishing lathe, lathe similar to Weiler, with numerous accessories as shown in the pictures. Equipment: - Collet chuck with draw-in collets Technical data: Iiedpfx Amoz Iptwj Djh - Spindle bore: - Spindle speeds: 700/1400/2800 (left/right) - Center height: 110 mm - Center distance: 160 mm - Largest swing over bed: 220 mm Accessories: Draw-in collets 359 E K 23 as shown in the pictures Coolant system Shipping by arrangement.

Condition: excellent (used), Year of construction: 2017, SIEMENS 840D SL control Working travels 550 x 320 x 420 mm Milling head swivellling +100 / -10 ° Spindle taper HSK A50 Spindle speeds -12'000 rpm Tool changer with 64 Pos. Turning spindle 4'500 rpm NC swivel rotary table with B- + C-axis Ijdpfxowwundo Am Dsih Tool breakage control system Tool lenght measuring device 3D-measuring tracer Misc. accessories MARCELS MASCHINEN CH

Condition: used, first registration: 08/1978, Year of construction: 1978, LAG 37 m³ slurry trailer with 6 chambers ! Newly refurbished for approx. €10,000, new brake system, new 3rd axle, new electrical system, new air suspension! • Aluminum body • 37,200-liter capacity • 6 chambers of 6,200 liters each Iedpfjwmpatox Am Doih • 6 dome covers • Direct discharge at the rear! • 3 x BPW air-suspended axles • Drum brakes • 385/65 R 22.5 tires - New MOT! - Ready for use! Subject to errors and prior sale!

Condition: new, Year of construction: 2025, operating hours: 1 h, functionality: fully functional, We offer for sale a high-quality UNTHA LR 1000 industrial wood shredder, in almost new condition, having been used only for approximately 1 hour of testing operation. This machine is a reliable and efficient solution for processing wood waste such as offcuts and solid wood materials, delivering consistent output size and excellent performance. Key Features & Benefits Condition: Practically new – only test run (~1 hour) Brand: UNTHA (Austria – premium shredding technology) Model: LR 1000 Robust industrial design for long-term operation High throughput capacity: approx. 600–700 kg/h (beech offcuts) Uniform output size: approx. 40 mm (30 mm screen installed) Ideal for woodworking companies, carpentry shops, and recycling operations Technical Specifications Material Input Max. input size: approx. 600 × 120 × 55 mm Feed system: tipping box approx. 1.0 m³ Moisture content: < 11% Metal content: not allowed Machine Performance Main drive: 2 × 18.5 kW Hydraulic power: 1.1 kW Rotor speed: 98 rpm Throughput: approx. 600–700 kg/h Cutting System Rotor diameter: 300 mm Number of knives: 27 pcs Cutting system: UNTHA cutter system Screen size: 30 mm Electrical & Control Voltage: 400 V / 50 Hz Control system: Siemens SIMATIC S7-1200 (CPU 1214) Dimensions & Weight Machine dimensions: approx. 1,704 × 1,863 × 1,630 mm Infeed opening: 1,000 × 1,050 mm Total weight: approx. 2,400 kg Iedpfx Amjzgr Hte Deih Included Equipment 45° machine configuration (improved feeding of bulky material) Horizontal discharge screw conveyor (closed design) Full bin indicator with automatic stop Machine support legs (~100 mm) External interface contact