Used Fz 37 for sale (10,134)

Condition: used, Year of construction: 1997, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,360 mm, travel distance Z-axis: 1,000 mm, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, spindle speed (max.): 15,000 rpm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, type of input current: three-phase, rotational speed (min.): 1,500 rpm, rotational speed (max.): 9,000 rpm, overall weight: 15,000 kg, Equipment: rotational speed infinitely variable, Initial commissioning: 1997 Control system: Heidenhain Working ranges X-axis approx. 3,000 mm Y-axis approx. 2,360 mm Z-axis approx. 1,000 mm A-axis ±90° Clamping table Length x width x height approx. 4,500 x 2,000 x 400 mm T-slots longitudinal 18H12 T-slot spacing 250 mm (The zero-point clamping plates shown and additional clamping devices are not included in the scope of delivery!) Milling head Spindle power: 12 kW Spindle speed: max. 9,000 rpm Tool holder: SK40 / ISO40 Linear axes drives Feed speed X, Y, Z axes: approx. 20 m/min Connection data Power requirement: approx. 20 kW Frequency: 50 Hz Voltage: 400 V Main fuse: approx. 63 A Dimensions, weights Space required by machine (without control cabinet): approx. 5,600 x 3,500 mm Required height: approx. 4,050 mm Total weight: approx. 14,000 kg Condition of the machine Fully functional, the machine is delivered without enclosure and must be enclosed in a CE-compliant manner by the buyer. Note: Godpfex Iuguex Abdeil The tool changer, vacuum table including pump, and extraction unit can be purchased at an additional cost. However, they are NOT included as standard equipment with the machine!

Condition: used, maximum load weight: 20,680 kg, overall weight: 37,000 kg, axle configuration: 2 axles, first registration: 03/2009, loading space length: 11,050 mm, loading space width: 2,510 mm, loading space height: 1,000 mm, Equipment: ABS, For inquiries regarding the vehicle, Mr. Seidel will be happy to assist you (by phone at ...). ---- MOL CY NV 1214/20T/37 ---- * Crane: Palfinger 44002 * Radio remote control * Stabilizers: mid and rear * Pallet grab * Additional spotlights: vehicle rear, crane * Air suspension * BPW axles * Drum brakes * Tridec steering * Both axles steerable * Central lubrication * Handbrake crank * Cargo area dimensions: length 11,005 mm, width 2,510 mm, height 1,000 mm * Tire tread depth: 1st axle: 10-12 mm, 2nd axle: 11 mm Upon request, we can provide you with a leasing or financing offer. Mr. Seidel (Tel. ...) will be happy to assist you. For more information, please visit our homepage. Gjdpfx Abjx Nth Hedsil !!! Subject to errors, changes and prior sale !!!

Condition: good (used), Cutting and shredding fans, industrial fans, radial fans, chip extraction blowers, fans, extraction, chip blowers, high-performance fans -Cutting and shredding fan: with replaceable saw blades and soundproof enclosure -Engine power: 37 kW Giodpfx Ajxx Awaebdol -Speed: 2955 rpm -Volume flow rate: m³/h -Total pressure: Pa -Inlet connection: Ø 400 mm -Outlet connection: Ø 360 mm -Impeller: Ø 760 x 160 mm -Dimensions: 1500/1710/H1850 mm -Weight: 1280 kg

Condition: good (used), Year of construction: 2006, operating hours: 9,911 h, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 310 mm, rapid traverse X-axis: 75 m/min, rapid traverse Y-axis: 75 m/min, rapid traverse Z-axis: 75 m/min, nominal power (apparent): 17 kVA, total height: 2,300 mm, total length: 1,500 mm, total width: 2,600 mm, overall weight: 3,400 kg, spindle speed (max.): 30,000 rpm, spindle nose: HSK40, number of slots in tool magazine: 40, input voltage: 400 V, Equipment: documentation/manual, CNC machining center CHIRON FZ08 KS Magnum High Speed Plus (HSP) TECHNICAL CHARACTERISTICS: Year of manufacturing: 2006 CNC control : FANUC 18i-MB5 Number of axes : 7 Stroke X axis : 450 [mm] Stroke Y axis : 270 [mm] Stroke Z axis : 310 [mm] Traversing feeds X, Y and Z axes : 75000 [mm/min] Max. bar diameter in turning spindle : 32 [mm] Main spindle max. speed : 8000 [rpm] Main spindle max. power : 12 [kW] Angular A axis stroke : 360 [°] A axis indexing precision : 0.001 [°] B axis swivelling stroke : -20° / +115 [°] B axis indexing precision : 0.001 [°] Spindle type : HSK40 Max. spindle speed : 30000 [rpm] Tool changer magazin number of stations : 40 Part turnaround by robot (6th side machining) : Yes RS232 Interface : Yes Total power required : 17 [kVA] Supply voltage : 400 [V] Number of running hours : 9911 [h] Dimensions : 1500 x 2600 x 2300 [mm] Weight : 3400 [Kg] EQUIPMENT INCLUDED: x1 RENISHAW TS27R tool probe x1 spindle cooling unit x1 parts catcher x1 coolant tank x1 unit for 6th face machining (gripping system not included) x29 tool holders type HSK40 BIG KAISER x10 collets type F37 SCHAUBLIN x1 washing gun x1 3-color status light x1 maintenance manual x1 electrical diagrams manual x1 operator's manual x1 programming manual Price on request, loading on truck included. Possibility of shipping Worldwide. Giodex Iiw Iepfx Abdol The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed Machine similar to brands such as Okamoto, ELB, GER, Tacchella, Karstens, Jones & Shipman, Jung, Favretto, Blohm. Internal and external grinding (ID/OD) also to be considered. Surface grinder, lathe, machining center, milling machine.

Condition: excellent (used), Year of construction: 2006, operating hours: 14,300 h, functionality: fully functional, machine/vehicle number: 414-46, Year 2006 with Fanuc Series 18i-MB5 Country of manufacture: CE - Germany Net machine weight: 3,400 kg Dimensions: 185x259x250 cm TECHNICAL SPECIFICATIONS Travel X / Y / Z: 450 / 270 / 310 mm Acceleration X / Y / Z: 0.7 / 0.7 / 1.0 g Rapid traverse X / Y / Z: 40 / 40 / 60 m/min Spindle speed max.: 15,000 rpm Tool interface: HSK A 40 Milling capacity in St 60: max 60 cm3/min Drilling capacity in St 60: max Ø 16 mm Threading: up to M12 Tool magazine / positions: 24 – special version with 40 on this machine Tool change time: approx. 0.8 sec Chip-to-chip time: approx. 2.2 sec 5-axis version NC rotary tilting table: +/- 100° Rotary plate diameter: 100 mm Grid drill pattern: M6 x 50 mm 4th axis speed: 40 rpm 5th axis speed: 60 rpm Direct measuring system for 4th and 5th axes: +/-20’’ / +/-20’’ Distance spindle nose – table surface: 170 – 450 mm Maximum workpiece weight: 6 kg Gsdpfxsxqmwbj Abdoil Technical information is provided without engagement and subject to errors or omissions.

Year of construction: 2024, condition: new, - 150 mm infeed high - 430 mm infeed width - 30 mm chips - 2 knives - 440mm diameter Rotor - 590 U/min Rotor Gisdpfxeful Uie Abdjl - 30 m/min Feed speed - 37 KW Mainmotor - 3 KW + 2,2 KW infeed roller Gearboxes - 6.000 mm conveyor belt - 2.000 mm discharge conveyor belt

Condition: used, Year of construction: 1999, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,360 mm, travel distance Z-axis: 1,000 mm, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, spindle speed (max.): 15,000 rpm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, type of input current: three-phase, torque: 57 Nm, overall weight: 15,000 kg, Equipment: rotational speed infinitely variable, Initial commissioning: 1999 Control: Heidenhain TNC430 PA with portable hand control unit Working ranges X-axis approx. 3,000 mm Y-axis approx. 2,360 mm Z-axis approx. 1,000 mm A-axis ±110° C-axis ±300° Clamping table Length x Width x Height: approx. 4,500 x 2,000 x 400 mm Longitudinal T-slots 18H12 T-slot spacing 250 mm (Shown zero-point clamping plates and additional clamping devices are not included in the scope of delivery!) Milling head Spindle power: 18 kW Spindle speed: max. 15,000 rpm Torque: 57 Nm Tool holder: HSK 63 F Tool clamping: hydraulic Linear axis drives Feed rate X, Y, Z axes: approx. 20 m/min Connection data Power requirement: approx. 20 kW Gedjx Ifdkepfx Abdeil Frequency: 50 Hz Voltage: 400 V Main fuse: approx. 63 A Dimensions, weights Machine footprint without control cabinet: approx. 6,000 x 3,500 mm Required height: approx. 4,050 mm Total weight: approx. 15,000 kg Additional equipment - 12-position tool changer - External minimum quantity lubrication - TT140 touch probe Condition of the machine Fully operational, machine is supplied without enclosure and must be enclosed by the purchaser in accordance with CE regulations.

Condition: excellent (used), Year of construction: 2002, CHIRON FZ 15S with 4 axis in Perfect Condition Gedpfjrgqu Hjx Abdjil Machine can be inspected any time under power

Condition: good (used), Year of construction: 2008, functionality: unexamined, This is a pressing roller / stacker / bander delivery typically used off the back of a folder. This unit is completely self-driven so can be used in conjunction with any Standard Horizon, MBO, Stahl or other make folding or special application machines. The pressing unit squeezes air from folded signatures to ensure a very tight fold, then can be batched in any amount desired. This unit has an end sheet/board feeder that works with batch counter and inserts end sheets or board at the front and back of each batch before banding. Banding is performed with a nylon strap that is sealed by thermal pressure. Godpfx Abexz Tbusdjil

Condition: used, Year of construction: 1995, Year: 1995 Controller: Fanuc 0M TECHNICAL DATA X-axis travel: 550 mm Y-axis travel: 300 mm Z-axis travel: 280 mm Table size: 950 x 370 mm Spindle speed: 20 - 10,500 rpm Spindle: SK40 Tool magazine: 12 positions GENERAL Service book: Yes Working hours: Godpfxex Syb So Abdoil Control language: German Spindle power: 5.5 kW Dimensions: 3 m x 2.4 m x 2.5 m Weight: 3,000 kg OTHER Payment and delivery: On request Additional information: Chip conveyor

Condition: excellent (used), Year of construction: 2005, operating hours: 9,100 h, functionality: fully functional, machine/vehicle number: 414-38, TECHNICAL DATA Travels  ; X / Y / Z 450 / 270 / 310 mm. Acceleration ; X / Y / Z 0,7 / 0,7 / 1,0 g Fast speeds ; X / Y / Z 40 / 40 / 60 m/min Spindle speeds max. 15’000 min-1 Tool connection HSK A 40 Milling cap. in St 60 max 60 cm3/min Drilling cap. In St 60 max dia. 16 mm Threading up to M12 Magazine / tool posts 24 – special on this one 40 Tool changing time abt. 0,8 sec. Time clamp-to-clamp abt. 2,2 sec. 5 axes execution NC Table tilting rotating +/- 100° Circular plates 100 mm Gijdokx Ek Tspfx Abdol « Rasterbohrbild » M6 x 50 mm Rotations 4th. axis 40 min-1 Rotations 5th. axis 60 min-1 Direct measuring system for 4th. And 5th. axis +/-20’’ / +/-20’’ Distance spindle nose – table surface 170 – 450 mm Max transportable weight 6 kg errors and omissions excepted-data given without obligation

Condition: used, Technical details: x-travel: ca.1000 mm y-travel: 400 mm z-travel: 420 mm control: Siemens Sinumerik 805/810 thread cutting up to max.: M 22 bore capacity in St 60 - full boring: 25 mm milling area: Leistung in St 60:150 mm sawing stroke: ca. 55mm mm range of revolutions per minute - continous: 20-6000 U/min Number of working hours: manual 26180 h tool turret: 12 Plätze/places tool taper: SK 40 total power requirement: 18 kVA weight of the machine ca.: 5,0 t machine dimensions LxWxH: 2,9x2,5x2,8 m transport measurements machine: 2,4x2,6x2,75 m Godpfx Abju Idnmodsil Equipment: - special equipment/device ( modulating clamping system) for milling jobs of profile materials with an automatic longtitudinal cutting to length device for workpieces via circular saw module. (without functionality) - hotrizontal tool clamping ( force fitted) with vise clamping system and parallel ledges.(momentarily approx. 80mm) - tool changer type Chiron - basket tool changer - tool clamping mechanically locked, infeed force 5000N - swarf conveyor make Knoll - loading and unloading system FMB LM RP 3000 The machine is not fuctional. On sale as is for a small budget i.D. *

Condition: used, mileage: 298,000 km, power: 96 kW (130.52 HP), first registration: 12/2007, fuel type: diesel, overall weight: 3,200 kg, next inspection (TÜV): 07/2026, color: yellow, gearing type: mechanical, emission class: euro3, number of seats: 3, total length: 5,290 mm, total width: 1,904 mm, total height: 2,778 mm, Year of construction: 2007, Equipment: ABS, air conditioning, electronic stability program (ESP), 1st owner. From a German fleet, major corporation. Due to several company restructurings, there are 4 entries in the registration certificate. TÜV valid until 07/2026. Full service history exclusively at VW (maintenance performed seamlessly up to 248,000 km). Long wheelbase with extra high roof and tall rear wing doors. The vehicle was never used for intensive delivery operations, but always as a workshop van. Partition wall, sliding door on the right. WÜRTH shelving system with vice and boxes for small parts. 3 seats. ABS and ASR. ESP. Air conditioning (requires refill, currently not working). Driver airbag. Powerful 2.5 liter TDI engine / 5-cylinder, 130 hp. Runs perfectly. Green emissions sticker (EURO 3 with PMK 4 directly from the factory). 6-speed manual transmission. Registered maximum speed: 158 km/h. Unladen weight: 2,167 kg. Gjdpoiq Ewvjfx Abdjil Gross vehicle weight: 3,200 kg. Favorable registration as "closed box van". The Bulli is equipped with good winter tires bearing the snowflake symbol, in compliance with current legal requirements. The T5 is ready for immediate use. The Bulli runs smoothly and is absolutely reliable. Considering its mileage, it remains a very well-functioning vehicle. The T5 was routinely replaced by a new vehicle and performed perfectly until its last day in service. No defects are known or anticipated for a new main inspection (MOT/TÜV). Normal signs of use appropriate for its age (nothing excessive, no major damage). This offer applies exclusively to businesses or public authorities. Subject to prior sale and errors excepted at all times. Net price: €4,700! (In case of export, we reserve the right to retain a deposit for the 19% VAT until receipt of the final export certificate.)

Condition: used, Year of construction: 2011, functionality: fully functional, For sale are 2 CNC milling machines Chiron FZ 08K W, year of manufacture 2011, including automated loading – robot arm cell. The machines are in very good condition, have been regularly maintained, and are ready for immediate operation. They impress with their precision, reliability, and compact design – ideal for series production. Gedpfxsw Rba Ss Abdjil

Condition: used, mileage: 74,880 km, power: 150 kW (203.94 HP), first registration: 12/1985, fuel type: diesel, overall weight: 11,000 kg, axle configuration: 2 axles, next inspection (TÜV): 05/2023, color: red, gearing type: mechanical, total width: 2,350 mm, total height: 3,400 mm, Equipment: ABS, ----* Radio * Rotating beacon * Rear axle differential lock * Power take-off * Leaf spring suspension ----* Metz DLK 16-4 SE ladder, built in 1985 (fully functional) * 4 hydraulic jacks with base plates * Personnel basket * Storage box * Loading area ----* Tire size front: 245/70R19.5 * Tire size rear: 245/70R19.5 * Fuel tank: 200 liters * Operating hours: 1953.49 hours * Technical Gross vehicle weight: 11,000 kg * Unladen weight: 8,530 kg * Total length: 8,800 mm * Vehicle inspection due: November 2022 ----Vehicle number 6993-----Subject to errors and prior sale.-----Advertising and various lettering have been digitally removed.----We are happy to assist you with all the formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional charge: Gsdpfxsvhul Se Abdeil *Trade-in of your old vehicle *MOT/SP inspection * Complete export processing * Financing arrangements * Application for export license plates * Vehicle transfer * Vehicle registration YOUR VTS TEAM

Condition: excellent (used), Spindle Moulder SCHELLING FZ 4 Heavy-duty cast-iron construction Motor speeds: 2250, 3000, 4500, 6000, 9000 rpm Motor power: 4.5 kW, 400 V, 50 Hz Spindle diameter: 30 mm Spindle height adjustment: 100 mm Table dimensions (L x W): 1100 x 900 mm Extraction port diameters: 120 & 80 mm Spindle with forward and reverse rotation Electric motor brake Milling fence rotatable and finely adjustable OERTLI milling fence jaws with aluminium inserts INCLUDES HOLZHER power feed unit 3 rollers 4 speeds Machine dimensions (L x W x H): 1100 x 900 x 1200 mm Machine weight: approx. 750 kg Giodpext N Dvefx Abdsl Note on used machines: • Errors in technical specifications and prior sale are excepted. • Listed prices are ex-works prices - free loading at location! • The machines have been cleaned and function-tested. • All machines are sold as inspected, without any form of warranty. Buyers are welcome to inspect machines at the location. • Special agreements are only valid in written form. (We only respond to enquiries with your address and telephone number!)

Condition: used, Year of construction: 2000, Number of axles 4 St. 2 tool change unit 20 Plätze spindle turning speed range 20.000 U/min control Siemens 840 D tool taper HSK 63 weight 6670 kg 143-68 Godpfx Aswhq Dijbdsil

Condition: good (used), CHIRON FZ 08 KS Magnum is a 5‑axis machining center engineered for precision, high accuracy and reliable production. Travels X450×Y270×Z310 mm; drilling 12 mm; tapping M8. Tool magazine 24 pos., tool Ø max 47 mm (100 mm free), length 160 mm, tool wt 1.2 kg. Spindle HSK‑A40 0–36000 rpm; spindle motor 7 kW; rapid 75 m/min; 3×400V 50Hz; air 6 bar; installed power 14 kW (19 kVA); machine ≈3400 kg; dims 2308×1405×2447 mm. Features: tool‑break control, RS232, switch‑cabinet air‑con, status light. Delivers tight tolerances for automotive, aerospace, medical, watchmaking. Gedpjxx U Nzefx Abdjil

Condition: new, Receiver capacity 2 x 37 l working pressure 4 - 8 bar Air consumption 170 - 500 l/min. weight of the machine ca. 36 Kg 1020 x 460 x 520 mm Mobile beam unit (soda blasting) Consisting of: Nozzle set and moisture separator Boiler 2 x 37 liters Godpfx Ajfv Au Asbdsil Blasting gun with 2.5m supply hose Soda blasting can also be used to clean engine parts, degrease parts, remove graffiti, remove mold, and repair damage caused by fire.

Condition: ready for operation (used), Year of construction: 1998, General Data Measurements width 1920 mm Measurements depth 3143 mm Measurements height 3000 mm Machine weight 5500 kg Control Unit Brand SIEMENS Model SINUMERIK 810M Main Drive Spindle speed range 10500 Tool taper SK40 Number of axis 3 Movement Gijdpfsx D Hmiex Abdol X-Axis Movement 750 mm Y-Axis Movement 400 mm Z-Axis Movement 600 mm Media Power consumption 29 kVA This CHIRON FZ 18 W MAGNUM HIGH SPEED, manufactured in 1998, is equipped with a Siemens Sinumerik 810M CNC controller, a 1240 × 850 mm worktable, and travels of 750/ 400/600 mm in the X, Y, and Z axes. The machine is still connected and in very good technical condition. If you are looking for high-quality milling capabilities, consider the CHIRON FZ 18 W MAGNUM HIGH SPEED we have for sale. Contact us for more information. Application Types Milling

Condition: excellent (used), Siemens 840 D, 48 tool stations HSK-A 50, spindle speed 15,000 rpm, workpiece changer, Knoll coolant system with internal coolant supply (IKZ), Thermodrive, mineral cast bed, automatic loading doors, central lubrication, extraction system for plastic chips. Giodpfx Aex D Up Sobdjl

Condition: good (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,250 mm, spindle speed (max.): 10,000 rpm, Zimmermann FZ38 – 5-axis gantry Year of manufacture: 2005 – fully refurbished and upgraded in 2022 by Zimmermann for €600,000, full documentation available X 3000 Y 2500 Z 1250 A +/- 100 degrees C +/- 360 degrees 2 spindles: 50 kW – 24,000 rpm and 44 kW – 10,000 rpm HSK 100 Linear axes certification 5/m Siemens control Giodpoxziamefx Abdsl U… Immediately available This machine was completely overhauled and upgraded by Zimmermann in 2022. At that time, approximately €600,000 was invested, with all invoices available. The machine is in very good, near-new condition.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: GG520A-19388, total width: 5,272 mm, total length: 12,500 mm, total height: 1,500 mm, overall weight: 5,300 kg, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, pressure: 8 bar, Bottero 520LAMe-37: Automatic machine for cutting, breaking and separating laminated glass. SN GG520A-19388 from 2011. Automatic positioning based on optimisation, automatic blade, 2 independent heating element sections, 20mm trimming, laser device for positioning diagonal cuts. Max cut 3700mm, max speed 100m/min, min 2/2 and max 8/8mm. Included: New felt (5mm) on the unloading table, the 520 LAMe-37 has also been serviced. Giedpfxexg Nxye Abdel

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 34205, total width: 4,100 mm, total length: 12,195 mm, cutting length (max.): 3,700 mm, We are selling our fully functional Hegla ProLam 37. Special features: Traveren – rotation device Support arms = 4 units for Low E glass, reinforced version Technical specifications: Film thickness: 0.38 mm to 3.8 mm Maximum cutting height: 2 x 3 mm to 2 x 8 mm Maximum glass size: up to 3,750 mm Year of manufacture: ProLam 37 (2011) Brand: HEGLA Gjdpfjxqc U Aex Abdsil The machine is still in operation and can be inspected on site at any time. Additionally, we have an EcoLam 60 available for sale, which we would include for an additional €10,000.

Condition: used, Year of construction: 2011,