Used Gary Long Furnace for sale (7,160)

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Data Godpj Adu N Nsfx Akhekd Manufacturer: Kuhlmeyer Type: EBS21 Machine type: Belt grinder Grinding Area Grinding length: approx. 3,000 mm MACHINE DETAILS Dimensions Length: 5,000 mm Width: 1,500 mm Height: 1,600 mm Weight: 500 kg

Condition: used, A programmable Ivoclar Programat P100 dental ceramic firing furnace including a vacuum pump is offered for sale. Control system: Integrated program control system with display and membrane keypad for setting firing temperature, temperature increase, holding time, vacuum and long-term cooling. Scope of delivery: Furnace, vacuum pumps shown as accessories and operating instructions for the furnace. Inspection possible by arrangement. Godpfj Aih D Dox Akhekd

Condition: excellent (used), Manufacturer / Type: Nabertherm L 08/14 with programmable C19 controller Configuration: horizontal Rated temperature: up to 1400 °C (continuous operation permissible temperature likely lower) Chamber volume: 8 liters Description: • Usable dimensions (W×H×D): approx. 15 × 15 × 30 cm • External dimensions (W×H×D): approx. 61 × 140 × 71 cm • Weight: approx. 100 kg • Maximum power consumption: 3.3 kW • Plug: 380 V CEE (three-phase, 16 A) Scope of delivery: Furnace only, no additional accessories – see original photos Condition: Used, in good technical and visual condition. The heating rod holder on the right side is slightly damaged, but the unit is fully operational. Shipping: Freight forwarding or personal pickup Additional information: • Fast heat-up times (in test: approx. 30 minutes to 1000 °C) • Labotherm, Tmax 1400 °C • High-quality Al₂O₃ fiber insulation for rapid heating • Special heating wire on ceramic oxide support tubes allows free heat radiation (→ long service life) • Heating from both sides • Low external casing temperature • Integrated control system with electronic safety interlock Gkodpfx Aksxr S Rpohjd • Programmable control via C19 controller

Year of construction: 2024, condition: used, CoolTemper PowerJet TCF-GTH-96.144-PJ4 Convection Flat Glass Tempering Furnace Serial no: H358 (2024) Maximum temperature: 750 degree / Operating temperature 700 degree, Min Glass Size 120 x 320mm, Max Glass Size (4-5mm) 1650 x 2400mm, (6mm) 2150 x 3650mm, (8-19mm) 2440 x 3650mm with Roller Loading/Unloading Tables, Cooltemper GlassScan heat map scanner, Overhead Platform/Fan Room, Cooltemper SMART IMMI Control Gkedpo Afwrbjfx Akhsd Location: This lot is located in Wellingborough, Northamptonshire, UK

Year of construction: 2003, condition: used, functionality: fully functional, machine/vehicle number: HWO 1/9-5.2​, - The system is located at the Geberit Keramik GmbH site in Wesel. - The system, including the associated safety technology, performs technical flash firing and re-firing and is prepared for this purpose. - Maximum firing temperature [°C] = 1300 Gkjdpfx Akozu Nvzshsd - Current operating temperature [°C] = 1238 - Number of burner groups = 10 - Number of burners = 38 - Number of kiln cars = 18 - Number of kiln cars in the kiln = 9 - Current firing cycle [h] = 17 - 23 - Gross energy consumption [kcal/kg] / [kWh/kg] = 785 / 0.912 - Specific energy consumption [kcal/kg] / [kWh/kg] = 1459 / 1.696 - Gas connection capacity [m³/h] = 770 - Usable waste heat [m³/h] = 4000 - Standard loading quantity [pieces] = 900-980 ceramic products Dimensions of the housing: - Length [m] = 14.4 - Width [m] = 6.4 - Height [m] = 5.7 - Volume density [m³] = 146.3 Dimensions of the kiln car: - Effective length [m] = 1.45 - Effective width [m] = 5.2 - Effective height [m] = 2.156 - Track gauge [m] = 1.5 (2x) Special features: In 2023, the kiln was completely overhauled and brought up to the latest state of the art. The following changes were made: - Renewal of the kiln roof: The fiber lining in the upper area was replaced with cordierite stones. - Renewal of the burners, including new nozzles, flame tubes and controllers. - Replacement of the media valves; installation of servo motors on the gas and air lines in front of the burners. - Installation of new software; the Simatec control panel was replaced – control is now exclusively via the PC. - Replacement of the O₂ control system; installation of a Zerox probe; installation of an O₂ analyzer for O₂ correction (to improve energy efficiency by approximately 12–14 %). - The system must be dismantled, packed and collected independently by the buyer.

Condition: like new (used), Year of construction: 2014, machine/vehicle number: 618, functionality: fully functional, operating hours: 800 h, power: 80 kW (108.77 HP), input voltage: 400 V, input current: 250 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 1,200 °C, inner dimension length: 600 mm, inner dimension width: 400 mm, inner dimension height: 400 mm, total length: 4,900 mm, total width: 2,950 mm, total height: 2,900 mm, overall weight: 10,000 kg, number of chambers: 1, number of shelf rows: 1, control type: PLC-controlled, actuation type: electric, Equipment: CE marking, documentation/manual, FOR SALE EXCLUSIVELY WITHIN EU COUNTRIES. DIRECT SALES TO END USERS ONLY. Very good condition, the furnace has only been used for 100 cycles. The delivery includes a charging electric forklift and three charging baskets. Gjdpfezz A Rrex Akhskd W-Technology s.r.o. Polní 8 79201 Bruntál Czech Republic

Condition: used, Cieffe FNCm 2.5/0.8/1500 Hardening Furnace, Chamber Furnace, 1120 °C Manufacturer: Cieffe Type: FNCm 2.5/0.8/1500 Max. Temperature: 1120 °C Series: 4185/1B Rated Current: 70A 37 kVA 400 Volt Year of Manufacture: 2000 Dimensions: External (L x W x H) 3000 x 1480 x 1750 mm Combustion Chamber (L x W x H) 2600 x 270 x 100 mm Gkedpfx Aenucgujkhed More items – new and used – can be found in our shop! International shipping costs available upon request!

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: 2081-9007, total height: 2,200 mm, total length: 1,462 mm, total width: 1,750 mm, workpiece weight (max.): 20 kg, type of input current: DC, overall weight: 3,300 kg, travel distance X-axis: 250 mm, travel distance Y-axis: 795 mm, travel distance Z-axis: 250 mm, input frequency: 50 Hz, input voltage: 230 V, workpiece length (max.): 700 mm, workpiece width (max.): 200 mm, workpiece height (max.): 700 mm, protection type (IP code): IP54, Equipment: documentation/manual, type plate available, Measuring machine with 4 NC-controlled axes, featuring non-contact measurement technology and an additional measuring probe for the automated measurement of micro-precision tools such as milling cutters, drills, step and profile tools. Extended measuring range, specifically for long tools up to 700 mm in length. Due to an additional backlight camera with 400x magnification, even the smallest tools, i.e., microwork tools, can be measured in terms of contour or profile. Thanks to the 400x magnification in both backlight and front light, microwork tools can also be measured using the backlight method. Backlight CCD matrix camera 1, magnification = 50x, diameter (up to 150 mm) and length measurements (up to 700 mm), angle measurements, and radii of the outer contour can be measured. Backlight CCD matrix camera 2, magnification = 400x, observation at the tool circumference, diameter, length, angle measurements, and radii of the outer contour of mini or microwork tools can be measured. Front light CCD matrix camera 3, magnification = 400x, observation of the side view, e.g., helix angle, chamfer width, chip space depth, chip, spiral, and relief angles. Front light CCD matrix camera 4, magnification = 400x, observation of the end face, axial, relief, and radial angles, chamfer widths, center distances. Gkjdjzvdxaspfx Akhod Tool holder SK 50. Software features, see PDF Software License. The machine is sold as a complete workstation with all existing accessories. Also available with a second

Condition: used, PROMEOS Gas-Fired Chamber Furnace Gkedpfxez Ipcxj Akhsd For sale is a gas-fired industrial furnace with a maximum furnace temperature of 750 °C and a specified rated thermal output of 40–80 kW in total. The system is designed for operation with natural gas or propane and features two burner heads of type ECO 03-40. The furnace is from the year 2016. The last known maintenance was performed in 2021. Equipment and Features Gas-fired industrial furnace system Maximum furnace temperature of 750 °C Two burner heads Operation with natural gas or propane according to technical specifications Electrical connection with 400/230 V Industrial design Technical Data Manufacturer: PROMEOS System Designation: BA 31010.0484.0000 Year of Construction: 2016 Maximum Furnace Temperature: 750 °C Burner Heads: 2 × ECO 03-40 Rated Thermal Output: 4 × 10–20 kW Fuel: Natural gas type H, E, and L / Propane Gas Connection Pressure: 50 mbar Propane Consumption: approx. 3.9 m³/h Combustion Air Requirement: approx. 120 m³/h Exhaust Gas Mass Flow: approx. 165 kg/h Air Ratio: 1.35 ± 0.05 NOₓ Emissions at Rated Load: approx. 20 ppm CO Emissions at Rated Load: approx. 10 ppm Electrical Connection: 400/230 V AC, 3L/N/PE Electrical Connection Power: 4 kW Protection Class: IP54 Weight: approx. 4,700 kg Sound Pressure Level: ≤ 70 dB(A) Dimensions of the PROMEOS Chamber Furnace - Width: 2,800 mm - Depth: 2,700 mm - Height including lifting door: 3,400 mm “We offer a suitable bank financing option for your project – all from one source.” You can find more articles – new and used – in our shop! International shipping costs available upon request!

Condition: used, functionality: fully functional, mileage: 159,717 km, power: 107 kW (145.48 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 2 axles, first registration: 11/2007, emission class: euro4, color: white, driver cabin: day cab, suspension: steel, number of seats: 3, Year of construction: 2007, fuel: diesel, The vehicle drives perfectly... it has a 4.25-meter long cargo bed + a D-Holandia loading ramp... suitable for a dealer or for export... price... net. Gedpfo Ai Thvjx Akhjkd

Condition: used, Year of construction: 2000, functionality: fully functional, Gas-heated forging chamber furnace from IOB Weinheim, available from company stock. The system features a recuperator, two burners, and an electrically powered lift-up door. Equipment: Gkodpfx Ao Aia Umskhjd • PMA KS92 temperature controller • JUMO LOGOPRINT 500 temperature recorder • Siemens SIMATIC S5-95U control system The existing drawing dated May 18, 2000, has the number 5440-20/0. Drawings, electronic documentation, and photos of the furnace, interior, and control system are available. A warm demonstration can be arranged upon request. Condition and inspection: The machine is functional and can be demonstrated under power by arrangement. To the seller’s knowledge, no defects are known. Availability and pickup: Available immediately. The buyer is responsible for disassembly, loading, and transport. The exact scope of delivery and the pickup date will be agreed upon.

Condition: excellent (used), Year of construction: 1983, Wide belt sanding machine Manufacturer: Bütfering Type: C55 2550 Year of manufacture: 1983 Belt speed continuously adjustable via a frequency converter Table: 2,550 x 950 mm Stroke: 400 mm Gkjdpfx Aj Ahgxrjkhjd Belt dimensions: 7,100 x 150 mm Sanding motor power: 4 kW Fan motor power: 2.2 kW

Condition: ready for operation (used), Wanderer, Type 31 - L 500 / Long-Thread Milling Machine - Machine type 31 L 500 - Drive pulley speed 750 rpm - Milling cutter speeds 55/80/118/170/250 rpm - 5 speed stages - Max. milling length 500 mm - Center height 200-210 mm - Diameter of rotation over the bed 400 mm - Diameter of rotation over the slide approx. 200 mm - Spindle bore approx. 85 mm - Drive power approx. 3 kW - Change gears (see images) - Work light Dimensions: L x W x H 2.4 x 1.5 x 1.7 meters / Weight approx. 3000 kg Gsdpfxs Aivdie Akhskd Errors and omissions excepted.

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, Muffle furnace, Thermconcept KK815/13/S, with an output of 50 kW and a maximum operating temperature of 1,280 °C. The furnace is designed for continuous operation. Gkedpfx Ao Aiwf Rokhod Several units available.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, operating hours: 20 h, Well-maintained and fully functional wide belt sander, manufactured in 2020. Manufacturer: Holzkraft Gedpfx Akjz S Ufbohekd Model: LBSM 3005 ESE Year: 2020 Working width: 300 cm. Electric height adjustment. The wide belt sander is in perfect condition, both visually and technically, and has been used very little. The machine can, of course, be inspected and thoroughly tested while powered on. The sale is to commercial businesses only and excludes any liability for material defects. No guarantee, warranty, or right of return.

Condition: used, Promeos Industrial Gas Furnace 850 °C For sale is a high-performance, gas-fired PROMEOS industrial chamber furnace, manufactured in 2018. The unit reaches a maximum furnace temperature of 850 °C and has a rated thermal output of 300 kW. According to the available technical data, operation is intended for natural gas types H, E, and L, as well as propane. The furnace features a lift-up door and is suitable for industrial heat treatment and production processes. Gedpfxoz Ipuue Akhskd Technical Data Manufacturer: Promeos Unit designation: BA 31010.0561.0000 Year of manufacture: 2018 Max. furnace temperature: 850 °C Rated thermal output: 300 kW Burner heads: 2 × (3 × 40-03 CEO) Fuel: Natural gas type H, E, and L / Propane Gas connection pressure: 100 mbar Propane consumption: approx. 11 m³/h Combustion air requirement: approx. 335 m³/h Exhaust gas mass flow: approx. 453 kg/h Air ratio: 1.35 ± 0.05 NOₓ at rated load: approx. 20 ppm CO at rated load: approx. 10 ppm Electrical connection: 400/230 V AC, 3L/N/PE Electrical connection power: 4 kW Protection class: IP54 Weight: approx. 4,700 kg Dimensions (W × D × H): approx. 3,000 × 3,000 × 3,400 mm (height including lift-up door) Internal/usable space dimensions (W × H × D): 1,500 × 950 × 1,500 mm Usable space volume: approx. 1.58 m³ Last known maintenance: 2021 "All from a single source: We would be happy to offer you suitable bank financing for your project." More items - new and used - can be found in our shop! International shipping costs upon request!

Condition: used, Year of construction: 2009, Year of manufacture: 2009 Curing Furnace Model: Electric Manufacturer: Reinhardt Type: E2 Gsdpfx Akezry Ipshskd Year of construction: 2009 Working temperature: 50-300 degrees Working space: 0.21m3 Opening size: 650x650mm Voltage: 3x400V Motor: 0.55kW. - Year: 2009 - Power [kW]: 0.6 - Chamber length [mm]: 650 - Chamber width [mm]: 650 - Max. temperature [°C]: 300 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1998, machine/vehicle number: 111419, functionality: fully functional, power: 3 kW (4.08 HP), input voltage: 380 V, input current: 8 A, input frequency: 50 Hz, type of input current: three-phase, grinding belt width: 150 mm, grinding belt length: 7,100 mm, grinding height: 580 mm, height adjustment type: electric, grinding belt speed: 150 mm/s, actuation type: electric, overall weight: 490 kg, Equipment: CE marking, documentation/manual, Samco belt grinding machine, type L/S 2500, Work table length 2500 mm, Work table width 1100 mm, Overall length 4040 mm, Overall width 2210 mm. Gjdpfx Ae Agbi Djkhekd

Condition: like new (used), Year of construction: 2024, machine/vehicle number: 8445, functionality: fully functional, operating hours: 3,000 h, power: 80 kW (108.77 HP), input voltage: 380 V, input current: 126 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 750 °C, inner dimension height: 1,000 mm, total height: 4,425 mm, number of chambers: 1, control type: PLC-controlled, actuation type: electric, fuel type: electric, Equipment: CE marking, documentation/manual, We offer this Rohde SG 80/120 nitriding furnace, which is new and manufactured in 2024. Manufacturer: Rohde Schutzgasofen GmbH Model: SG 80/120 Year of manufacture: 2024 Condition: As new Category ID: 34 Type ID: 4293 Type: Nitriding furnace Gksdpfx Ajzuabzjkhod If you have any questions or need further information, please do not hesitate to send us a message or contact us by phone.

Condition: used, GBS Prüfpuls rev3 Pulse generator for long-term insulation tests The Prüfpuls unit is designed for long-term insulation tests on test specimens with a capacity of up to 6 nF. Converter for high-voltage test transformer · Internal sine wave generator: 50-200 Hz. · Pulse width modulation 16-24 kHz of the sine wave via a full bridge. · Converter voltage adjustable from 0-600 V, Imax = 2.6 A, maximum power 1.3 kW · Pulse current limitation 110 A (shutdown threshold) Gkjdpfsu Egz Rsx Akhed Pulse transformer – drive · Drive via a full bridge · Full-bridge power supply adjustable from 0-1000 V, 1.3 A max. · Pulse current limitation 100 A (shutdown threshold). · Pulse width 20-120 μs, nominal 94 μs, adjustable · 2 selectable series inductances 150 μH, 300 μH, to adjust the pulse width or rise times to the load capacity and voltage. · Pulse repetition frequency 0.1 – 2.5 kHz, adjustable. · Polarity: Adjustable to positive, negative, or alternating, depending on the polarity of the sine wave signal. · Cosine-shaped pulse at the transformer output Pulse transformer cascade · Output transformers in a 5-stage cascaded circuit. · Total turns ratio selectable as 1:7.7, 1:10, or 1:15 via taps. · Maximum output voltage 15 kV with possible load capacities of: * 6 nF with a pulse width of 73 μs at a repetition frequency of 2.5 kHz * 10 nF with a pulse width of 103 μs at a repetition frequency of 1.25 kHz · Voltage divider 1:1000 in parallel. · Overvoltage protection at approx. 20-23 kV by parallel spark gaps · Thermistor for over-temperature detection in the 1st transformer stage. · Earth-side current measurement socket 100 mV/A. Breakdown detection, testing · If the maximum bridge currents for the transformer drive or the maximum currents of the bridge power supplies are exceeded, the high voltage is switched off. · The device has a resettable operating hour counter to determine the test time. Manufacturer's price approx. €59,500 More items - new and used - can be found in our shop! International shipping costs on request!

Condition: like new (used), Year of construction: 2008, operating hours: 20 h, functionality: fully functional, machine/vehicle number: 23477, workpiece weight (max.): 550 kg, total width: 1,300 mm, total length: 1,150 mm, total height: 2,800 mm, power: 12 kW (16.32 HP), input voltage: 400 V, usable tank capacity: 150 l, We offer this almost unused Rohde electric chamber furnace, model KEU 150 N SoB, manufactured in 2008. Manufacturer: Rohde Type: Electric chamber furnace KEU 150 N SoB Year of manufacture: 2008 Maximum temperature: 650 °C High-quality programmable control system Bentrop Thermocomputer TC 507 Neatly arranged control cabinet No visible signs of corrosion or thermal damage Industrial special version with extraction/air guidance Complete documentation If you have any questions or require further information, please feel free to send us a message or call us. Gkodpfx Aoz Ehi Eekhed

Condition: used, Glasbeek Finish Gas Chamber Furnace, Type 003.05 Manufacturer: Glasbeek Finish Type: Gas Chamber Furnace Heating Medium: Natural gas Type 003.05 Includes loading cart Maximum temperature: 200 °C Burner type: Forced draft burner Manufacturer: Dreizler Type: M 06.2-95 Type: Forced draft burner Modulating operation Burner output: 40-110 kW Gas family: Natural gas Category: 12L Connection pressure: max. 100 mbar Power connection: 220/230V / 50 Hz Motor power: 0.27 kW Electrical power consumption: 0.6 kW Combustion chamber pressure: 1.6 mbar Burner number: 0201756 Year of manufacture: 2002 Dimensions Internal dimensions approx. W1900mm x D2950mm x H1800mm External dimensions approx. W2530mm x D3300mm x H2800mm You can find more new and used items in our shop! Gkedsd Spx Depfx Akhod International shipping costs available upon request!

Condition: used, Year of construction: 2015, functionality: fully functional, input voltage: 400 V, Used baguette long moulder model FVF 800 Weight range approx. 50 – 1200 g Output/hour approx. 1,200 pieces - Stainless steel housing - Mobile undercarriage - Various new parts (bearings, drive shaft, main switch, new belts) - Technically inspected, cleaned Fully functional (Photos = sample model) Gjdpoy N S Dyofx Akhokd All prices are net plus VAT, ex works Syke. Available at short notice (shipping possible at buyer's cost) Advance payment required with order We operate exclusively under our General Terms and Conditions. Subject to prior sale, technical modifications, and errors.

Condition: good (used), functionality: fully functional, mileage: 72,305 km, power: 73 kW (99.25 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, wheelbase: 2,728 mm, first registration: 08/2018, next inspection (TÜV): 11/2028, loading space length: 1,900 mm, loading space width: 1,225 mm, loading space height: 1,150 mm, emission class: euro6, color: white, number of seats: 3, number of previous owners: 2, Year of construction: 2018, Equipment: ABS, Bluetooth, USB port, air conditioning, airbag, central locking, cruise control, electric window regulation, electronic stability program (ESP), navigation system, onboard computer, parking sensors, power assisted steering, power mirror, seat heater, sliding door, soot filter, summer tires, traction control, trailer coupling, truck registration, winter tires, Clean Peugeot Partner 1.6 Blue HDI 100 panel van with a long wheelbase (L2), special model Premium Avantage Edition with extensive special equipment, Bott cargo area equipment, trailer hitch, navigation system, audio system with Bluetooth and touchscreen, air conditioning, cruise control, airbag package, 3-seater, Multiflex co-driver double seat bench on the right, heated driver's seat, rear parking assistance, Grip Control, 8 tires - summer and winter complete wheels - etc. Truck registration Euro 6 5-speed gearbox ABS with EBD Exterior mirrors, electrically adjustable, heated, foldable Airbag package Double airbag, passenger side can be deactivated Side airbags, on both sides Hill start assist On-board computer Open roof storage Tachometer Third brake light ESP including ASR Electrically operated windows in the front Speed limiter and cruise control 180° rear wing doors without glazing Headrests (3) height-adjustable Cargo area lighting Bott cargo area package and cargo securing package, wipeable Bott cargo area floor with recessed tie-down points for cargo securing Bott side protection panels up to roof height, side mounting rails, on both sides Document holder on the right Steering wheel height and depth adjustable Package: Premium AVANTAGE package (Partner) Package: Grip Control package (Partner) Particulate filter Gsdpfx Aj Akdzpjkhskd Sliding doors on the right Power steering Immobilizer Seat: Driver's seat height-adjustable Seat: Multiflex double co-driver seat bench, 3-seater Partition below, sheet metal or grid, loading flap on the right Central locking with remote control Parking assistance, rear, audible Air conditioning Navigation system, color Audio system with Bluetooth and touchscreen, USB Heated driver's seat 4x summer complete wheels, tires 195/70R15C, tread approx. 80% 4x winter complete wheels, tires 195/70R15C, tread approx. 70% Full-size spare wheel Cargo area dimensions: Length 1,900 mm, Width 1,225 mm, Height 1,150 mm Trailer hitch, ball head Major inspection with engine oil + brake fluid change as well as replacement of rear axle brake pads, all filters: - oil filter, air filter, cabin filter, fuel filter - new. Brake discs and brake pads of the front axle are in new condition. TÜV/emission test also new, valid until 11/2028. Vehicle available from November 18, 2026 If you have any questions, please do not hesitate to contact us by telephone. The vehicle description serves only to describe the vehicle and does not constitute any guarantee in the legal sense. No guarantee is given for accessories, subject to changes, prior sale and errors! We are a member of the Federal Association of Independent Car Dealers (BVfK) and carry the BVfK quality seal!

Condition: used, Laboratory furnace for bending tests, 120 kW firing furnace, 900 °C chamber furnace 2 bending chambers Adjustable ceiling height Temperature range: max. approx. 900 °C Additional heating Switchgear and control cabinet PC, manufacturer: HP, Intel Core 2 Duo Voltage: 400 volts Power: 120 kW Year of manufacture: 2015 Gjdsxurpwopfx Akhskd Pre-chamber Width: 900 mm Height: 300 mm Depth: 580 mm Bending chamber Width: 520 mm Height: 115 mm Depth: 550 mm You can find more new and used items in our shop! International shipping costs available upon request!