Used Gary Long Furnace for sale (6,904)

Condition: new, functionality: fully functional, Year of construction: 2026, A STURDY GIANT FOR THE PRODUCTION OF NATURAL GAS PIPELINES Exclusive Features: • Max Pipe Length: 12.000 mm • Max Bending thickness (mild Steel): 12.000 x 28mm • 3 rolls with Variable Axis configuration Itodpogurb Hefx Addjb • Anti-deflection System for Top roll • Anti-deflection System for Bottom Rolls • 3 rolls drive • Automatic Pipe Ejection System Capacities for Material Yield 360Mpa 12.000 x 17mm a D= 1500mm 12.000 x 15mm a D= 550mm 6.000 x 22mm a D= 1500mm 6.000 x 19mm a D= 550mm Possibility of adding interchangeable top rolls to reach Higher thickness capacities up to more than 12000x23mm or Smaller Diameters down to 400mm. Available immediately from the factory!

Condition: like new (used), Stainless horizontal fish slicer with adjustable thickness, adjustable stroke and speed. Itjdpfx Adjdz Tcbodob

Year of construction: 2009, condition: excellent (used), functionality: fully functional, Equipment: CE marking, type plate available, Induction furnace for heating steel with dimensions up to 550mm in length, 100mm in width, and 20mm in thickness. The furnace is connected to a feeder for small rods with dimensions from 10x10 to 22x22 and lengths up to 300mm. The loading feeder sorts the parts and automatically loads the inductor with new pieces for heating. The feeder is ideal for the production of large nails, screws, etc. Its operation can be seen in a YouTube video. Performance is very high. For small parts, heated items (up to 1100 degrees) can be collected every 6 seconds. There are two inductors available for heating materials up to 20mm and up to 16mm thick. It is possible to modify the furnace according to your needs. The cost of replacing the inductor for other sizes is approximately EUR 3,000. The machine is very versatile in terms of the sizes of products it can heat. Itsdpfx Adew Hqldsdsb Capable of heating flat bars, round bars, or square bars. The complete machine consists of a generator, induction furnace with inductor, rod feeder, and cooler.

Condition: excellent (used), functionality: fully functional, Used annealing furnace Manufacturer: Rhode Itodpfx Adox Tbgrsdob Type: protective gas furnace KL 70/65/135 Year of manufacture: 1992

Condition: good (used), machine/vehicle number: 1161020, Year of construction: 2016, Width: 3,000mm, front boom dimension: 135mm, load capacity: 3,000kg Ijdpjt A A Igjfx Addjtb

Condition: as good as new (ex-display), Year of construction: 2025, Exhibition machine (new), available immediately - Internal dimensions (WxDxH): 1250 x 4000 x 1450 mm Iedpsp H Tb Tofx Addstb - External dimensions (WxDxH): 1900 x 4900 x 2500 mm - Power consumption: 240 kW - Current consumption: 350 amperes - Maximum temperature Tmax: 1300°C - Furnace weight approx.: 6000 kg - Control system: JUMO IMAGO 500 with software packages (OPCA & PCC) - Chart recorder: JUMO Logoscreen 601 - Includes feedthrough and 6 additional sockets for recording customer type K thermocouples - Multizone design (3 zones) - Control panel with solid-state relays - Control panel air conditioning - Automatic supply and exhaust air dampers - Automatic exhaust air dampers, regulated as follows: small cooling (2 dampers open), large cooling (all 6 dampers open) - Regulated cooling system (including frequency converter, controlled by the control system) with supply air fan - Electrically driven bogie hearth on rails - Max loading capacity 3.5 tons, reinforcement available on request! Metal loading surface for bogie hearth on request! - Swing door - Documentation and CE declaration Reinforcement of the bogie hearth available on request! See image 4 (conversion example)! We are happy to offer installation, commissioning, and staff training. Please contact us! We supply new and used industrial furnaces. Viewing available in our warehouse upon request! Keywords: bogie hearth furnace, bogie furnace, ovens, annealing furnace, firing kiln, hardening furnace, heat treatment furnace, oven, tempering furnace, curing oven, drying oven, industrial furnace

Condition: excellent (used), Catalog number 7838 TECHNICAL DATA Ijdpfx Aex N Tnysddetb - Machining length: 2760 mm - Machining width: 800 mm - Main motor: 4 kW - Sanding belt width: 150 mm - Right/left rotation - Electric table adjustment up/down 0.15 kW - Extraction port diameter: 135 mm, 120 mm - Overall dimensions (L/W/H): 4120x1600x1400 mm - Weight: 500 kg ADVANTAGES – Not repainted – Electric table adjustment – Used sander, in perfect condition, very little use Net price: 8,900 PLN Net price: 2,120 EUR based on a rate of 4.2 EUR (Prices may change with significant exchange rate fluctuations)

Year of construction: 2017, condition: excellent (used), functionality: fully functional, Chamber furnace with exhaust hood, in very good condition. 12-month warranty in electrical inspection, delivery at the end of January 2026 - Max temperature: 1300°C - Internal dimensions (W x D x H): 400 x 400 x 400 mm - Capacity: 60 litres - Separate main switch - 5-sided heating - Supply and exhaust air with dampers, electrically operated via Belimo actuators - Supply air fan controlled by frequency converter via controller - Stainless steel exhaust hood - Bentrup 507 control system, thyristor control - Controller language: German, cannot be switched to other languages! - Additional strip chart recorder Type S for external data logging Itodjtbq Eqepfx Addob - Documentation - Net weight: 250 kg - Power consumption: 18 kW - Current consumption: 26 amperes - Connection voltage: 3/N/PE 400 VAC - Connection type: prepared for fixed installation, 32 A plug Furnace fully overhauled, all switching electrical components replaced with new parts. Supplied with warranty. We have several units of this furnace type in stock. Viewing by appointment. Furnace, furnaces, annealing furnace, industrial furnace, chamber furnace, kiln, drying oven, tempering furnace, laboratory furnace, hardening furnace.

Condition: used, Fork carriage with hydraulic sideshift + long forks suitable for STILL type EFG 3.0/6004. Isdov Rmvbspfx Addjtb Fork carriage width: 1.100 mm Tine length: 1.900 mm Tine cross-section: 100 x 45 mm

Condition: used, Johannsen T 94 long-belt sander for precise sanding of solid wood and veneer surfaces. The machine is ideal for joineries and high-end interior finishing and, thanks to its robust construction and sensitive belt control, ensures a consistent sanding pattern. Includes a large supply of sanding belts. Grinding length: approx. 2,600 mm Isdpsxtbvdofx Addjtb Grinding width: about 850 mm clearance height: approx. 340 mm height adjustment: electrical engine: 4 kW LBH: approx. 4 x 2.2 x 1.5 m mass: about 700 kg

Condition: used, Three-phase power meter, current, voltage and power measurement, long-term recording, energy metering 3-phase power measuring device, ammeter, voltmeter, digital multimeter, active power, apparent power, reactive power BEHA Type UNITEST Power Analyzer 93555 For measuring voltage, current, active power, apparent power, reactive power, power factor, phase angle, frequency measurement, rotation field detection, energy measurement, harmonic analysis Display: LC multifunction display with backlight Refresh rate: approx. 2 sec. Data logger: 512 kB non-volatile memory (max. 21,000 readings, max. 10 measurement series) Sampling rate: 5 s, 30 s, 1 min, 2 min (adjustable) Data transfer: via optically isolated RS232 interface Manual reading memory: max. 99 readings Overvoltage category: CAT III 600 V Power supply: 8 x 1.5 V batteries (AA) or plug-in power supply 230VAC / 12VDC (batteries not included) Voltage measurement: 3 input channels with common reference point "N" Measurement range: 0–600 V rms Display range: 0–999.9 V rms Resolution: 0.1 V Mains frequency: 50 Hz Current measurement: Input range I1, I2, I3: 3–999.9 A Input I4: 3–250 A Display range: 0–999.9 A Resolution: 0.1 A Clamp opening: 40 mm Active power: Option to display the active power of a single input or the total value Display range: 0–999.9 kW Resolution: 0.1 kW Apparent power: calculated from the RMS values of voltage and current Display range: 0–999.9 kVA Resolution: 0.1 kVA Frequency measurement: Range: 45–80 Hz Resolution: 0.1 Hz Accessories: Isdpfsx A Imzex Addjtb - Carrying case - User manual - 4 current clamps - 4 measuring leads with crocodile clips - RS232 adapter cable - Plug-in power supply 230VAC / 12VDC Overall dimensions (W x H x D): 370 x 270 x 170 mm Total weight: kg Device tested, fully functional. The housings of 2 current clamps are damaged and the battery compartment is slightly oxidised, see pictures.

Condition: used, functionality: fully functional, mileage: 149,008 km, power: 110 kW (149.56 HP), first registration: 12/2025, empty load weight: 3,999 kg, overall weight: 7,500 kg, fuel: diesel, color: grey, driver cabin: day cab, suspension: parabolic leaf (spring), Year of construction: 1999, The vehicle has an original mileage of 149,008 km. It is in perfect condition. The platform measures 6.10 meters in length. Itsdpfx Asx Dtaisddob

Condition: new, Year of construction: 2023, functionality: fully functional, We are a provider of innovative solutions in the field of horizontal winders. Our state-of-the-art devices set new standards in the industry and enable efficient, precise and reliable stretching of long goods. Discover the versatile functions and first-class quality of our horizontal winders on our website, which offer you an optimal solution for your requirements. Itjdpfx Asr Nc Tioddsb - Semi or fully automatic - Inner diameter: 515mm - Film width: 250mm - Minimum product length: 350mm

Condition: used, Jrion HFS-170/15-SA long-cut circular saw for precise longitudinal cuts in solid wood, panel materials and wood composites. cutting length: approx. 5,300 mm Iodpfx Adexvcacodotb

Condition: used, Used green lacquered steel stacking bin 1200x850x670mm. The storage bin stands on four sturdy legs, making it easy to pick up with a forklift or pallet truck. The stacking bin also has four upright corners with lifting eyes. Iedpfxew Swy Ro Addotb This makes the bin easy to stack. Open long front for easy access to goods. L: 1200, W: 850,

Condition: used, L: 1240, W: 1045, H: 680 (mm). Product: Stacking box steel. Type: Fixed construction. Version: With front opening. Material: steel. Walls: corrugated steel plate. Floor: profiled steel. Ijdpfjwprz Ssx Addetb Euronorm (mm): 1200 x 1000. Colour: green. Surface treatment: painted. Internal length (mm): 1120. Internal

Condition: used, Fully collapsible used mesh container. This gitterbox is easy to fold due to its hinged walls. One long side wall and one short side wall folds away half way for easy access. The sturdy steel frame stands on four legs and can easily be picked up by a forklift or pallet truck on both sides. The wire container can be stacked Itjdjlb Uwgspfx Addob

Condition: used, Used steel stacking bins. The used storage bin stands on sturdy slides and is therefore easy to pick up with a forklift or pallet truck. Itodpfx Ask I Rt Uoddjb The stacking box is also equipped with four upright corners. This makes the bin easy to stack. 1 long side is half open. L: 720, W: 680, H: 350 (mm). Product: Stacking box

Condition: used, Used gitter box directly available at Kruizinga. nl. Itsdpfxox Ahr Dj Addeb This high quality steel mesh container is one of the most used/sold load carriers in the industry, especially in the steel industry due to its high load capacity and stackable capacity. This mesh container is ideal for small parts and very practical to use because of the 2 steel

Condition: used, Batch offer of 10 used Poolgitterbox DB according to UIC standard 435-3 Buy your used DB gitterboxes directly from Europe's largest supplier. Itjdpsx Ahtbjfx Addjb This steel mesh container is one of the most widely used/sold load carriers in the industry, especially in the steel industry due to its high load capacity and stackability. This mesh

Condition: used, Lot offer of 4 used pole gitterbox DB according to UIC standard 435-3 Buy your used DB gitterboxes directly from Europe's largest supplier. This steel mesh container is one of the most widely used/sold load carriers in the industry, especially in the steel industry due to its high load capacity and stackability. Itsdpsx Ahthsfx Addsb This mesh

Condition: used, Used Pool gitterbox DB according to UIC standard 435-3 Buy your used DB gitterboxes directly from the largest supplier in Europe. Itedpsx Ahr Rsfx Addsb This steel mesh container is one of the most used/sold load carriers in the industry, especially in the steel industry due to its high load capacity and stackability. This mesh container is

Condition: used, functionality: fully functional, Year of construction: 2019, Info: Max.Glass Dimension: 1800*2800mm (bottom floor); 2000*3000mm (top floor) Max.Glass Thickness: 15+15mm Min. Glass Thickness: 3+3mm EVA Film Thickness: 0.25-0.76mm Machine dimension: 3680*2260*1650mm Machine weight Ijdpfx Ajwarqzsddstb

Condition: excellent (used), functionality: fully functional, Speedburn 2000 x 1000 x +/- 900 mm aardgas 25 mbar Max. gas consumation 10 m³/uur Capaciteit 96 kW Max. temperatuur 700ºC Power 230V/50Hz - 10 A Temp. controll : Bentrup TC 405/30 Itsdpfxex Dtwno Addjb

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, bending furnace with molds for sink 380 V 50 HZ KW 60 Usefull size = 2500 x 1200 mm / 98”x47” Ijdpfxex Dtwho Addotb