Used Gastl Rg 200 for sale (18,248)

Condition: used, Year of construction: 2001, Year 2001 serial number 0940/01 operating pressure 8 bar Ihsdpfex U A Hpjx Addot +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: reconditioned (used), Year of construction: 2002, operating hours: 44,590 h, functionality: fully functional, pressing force: 200 t, filling opening width: 1,020 mm, filling opening length: 2,000 mm, bale width: 1,100 mm, bale height: 1,100 mm, oil tank capacity: 3,100 l, power: 150 kW (203.94 HP), year of last overhaul: 2025, Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 112 Year of construction 2002, partially refurbished in December 2025 Operating hours 44,590 hours, stand December 2025 Press power main press 200 tons Specific press capacity 16,5 kg/cm² Feed channel 2,000 x 1,020 mm Filling volume 2,65 cm³ Theoretic throughput rate 795 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 75 kW Tying system 5-fold horizontal, full automatic Throughput rate at MSW approx. 48 up to 54 tons/h, depends on material Volume hydraulic oil tank 3,100 l Machine weight baler approx. 50,8 tons Scope of delifery: 1 piece baler MACPRESSE, type 111A 1 operating manual with CE declaration, electrical and hydraulic circuit diagram Comments: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Hydraulic oil tank emptied and cleaned • Oil and air filters replaced • New hydraulic oil filled • All hydraulic hoses replaced • Press ram dismantled, broken down into individual parts, mechanics made operational • Front two main rollers replaced • Knives on the press ram replaced • Main hydraulic cylinder dismantled, disassembled, cylinder tube and piston rod checked, complete seal set replaced • Counter knife in the frame replaced • Knife gap adjusted to approx. 3 mm • Upper steel guide rails in the frame on the left and right replaced. • Worn press base cut out, base plate replaced with wear-resistant HARDOX steel. • Binding and twisting unit dismantled, broken down into individual parts, mechanics made functional, all twisting shafts and ball bearings replaced. • All wire rollers in the needle heads replaced • Wire knives cleaned and readjusted, chains greased and tensioned • All wire deflection rollers made operational • All door contact switches replaced • Wirbulator device dismantled, disassembled and made operational Ihedjx Dnb Uepfx Addet • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode, see our video for the machine function test. The documentation (BA, CE, electrical/hydraulic circuit diagram) is complete. Viewing is possible by appointment. We accept no liability for the technical specifications or any errors.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 10024150, Sewing machine Muller Martini Ventura MC-200, Machine speed* Mechanical of 18 to 200 cycles/min, max. 12 000 cycles/h, min. signature length 120 mm, max. signature length 510 mm, min. signature width 75 mm, max. signature width 320 mm, max. signature thickness 4 mm, Lap opening min. 8 mm, low or high folio lap, Stitches Number of stitches standard 13, staggered 14, Stitch length 16.5 mm with/without blind stitch possible for all stitch types Sewing machine Muller Martini MC 200 Ihedpfx Adex Rywkedot

Year of construction: 2015, condition: excellent (used), Three-jaw chuckMake Röhm Diameter 200 mmmwith individually adjustable jawsShort taper size 6Taper diameter 106.390Hole diameter 133.4Weight 24.5 kgBJ estimated Iodpfxjd Th I Te Addoht

Condition: used, Security driver for Rotary heart Diameter 200 mm Bolt circle diameter 133 mm Iodpfx Adjdb Uy Iedoht Cone 106 mm

Year of construction: 2014, condition: new, digital length measuring device make Heidenhain ID 355 533-04 measuring bar type LF 481 - signal 1Vpp - measuring length 200mm Ijdeb T Uqiepfx Addjht

Condition: used, Two jaw chuck Forkardt Diameter 200mm 2 BHE 200 short taper diameter 106,4 mm = size 6 Ihjdpfxocurfys Addjt Bolt circle diameter 133 mm

Condition: used, Face drivers Make WMW Clamping ranges 30 - 200 mm Ihedpfx Adecu Ngkodst pmax 3500 kn Short taper size 5

Condition: used, Circle cutter MK 5 from 50 - 200 mm in diameter Ihodpfxjcxqbgs Addst

Condition: used, Grinding spindle Make FAG Dimensions of the conical pin of the recording: Diameter 80-61 lg 100 mm intake Cone Diameter min. 68 lg. 70 mm Diameter Max 80 lg. 70 mm min. 61 lg. 100 mm Max. 80 lg. 100 mm Length 500 mm Diameter 200 mm Weight 100 kg Ijdpec Tuxdefx Addjht DX9UK3MUZNK

Condition: good (used), Two-jaw chuck Ihodpfxjctd Rls Addet Make Forkardt type 2 KS 200 Mo 200 mm diameter mounting 110 mm diameter

Condition: good (used), pneumatic power chuck Make Forkardt Type UVE 200 - 50 - J5 KKG 5 Bolt circle diameter 105 mm cone 80 mm G flat. diameter 280 mm diameter hollow spindle 50 mm Ihodsdm Htpopfx Addot G flat. Height with jaws 200 mm Weight 47,5 kg

Condition: used, (2) Unused cryogenic nitrogen gas generating air separation units with capacity 200 mTPD combined. Each system was designed to produce a flow rate of 3,334 Nm3/hour (100 mTPD) at 115 PSIG and 0 degrees Celsius. The nitrogen produced is of the highest purity, meeting industry standards as follows: - Oxygen (O2): maximum 3 ppm v/v Iodow U A Irepfx Addjht - Moisture (H20): maximum 3 ppm v/v - Total hydrocarbons (THC): Maximum 1 ppm - Carbon dioxide (CO2): Maximum 0.5 ppm v/v - Carbon monoxide (CO): Less than 1.5 ppm v/v (when incoming air CO

Condition: used, Year of construction: 2015, operating hours: 2,487 h, machine/vehicle number: 94xxxx, CE mark: yes Please contact ATS Norway for more information Please provide reference number upon request: 21576 Specifications: 2015 model 2487 hours 10050 kg 34 kW Hydrostatic transmission Basket Tires (see pictures) 4x4 4 wheel steering Transport length: 6.30 m Width: 2.40 m Turn on all wheels Working height: 20 m Platform height: 18 m Range: 12 m Lifting capacity: 230 kg Overhang: 8 m Side shift on basket Control panel Ready for delivery Certified to June-2026   Description: We have a 2015 Manitou 200ATJ Telescopic Forklift for sale. Robust and efficient lift for demanding jobs in the field! The Manitou 200 ATJ is a powerful articulated boom lift with impressive reach and accessibility. Ihjdpfx Aexp Awnjddot Perfect for contractors, rental companies and industrial companies who need reliable access to heights, even on rough terrain. Everything works as it should and services are carried out continuously. Ready for delivery Hours: 2487 Own weight: 10050 Kw: 34 CE: Yes Model: 200 ATJ Teleskoplift

Condition: excellent (used), Year of construction: 2007, turning length: 1,545 mm, turning diameter over cross slide: 660 mm, spindle bore: 65 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,545 mm, Make: MAZAK Type: INTEGREX 200-4 ST Control: MAZATROL MATRIX Year: 2007 Multi-Tasking Machining in a Single Machine Setup Sub spindle for overtaking with full C-Axis The INTEGREX IV series can finish all machining processes. High speed, advanced milling spindle that can tilt up to 240 degrees swiveling. Lower turret with rotary tool spindle so livew tooling Chip conveyor with coolant and 15 Bar iKZ Double chuck KNCS-N 210-53 SMW Autoblock MAZAK Flex -GL150F Gantry Loader Gripping range 200 x 120 length x 15 Kg Max. turning Ø: 660mm X-Axis: 580mm Y-Axis: 160mm Z-Axis: 1545mm B Axis: 270° Spindle bore: 65mm Speedrange: 5000Rpm Spindle power: 22kW Subspindle speeds:5000Rpm Subspindle bore: 65mm Subspindle power: 18.5kW Ihedpfox S Hm Iox Addot ATC / revolver: 40 B-Axis Toolsystem:Capto C6 B-Axis Speedranges:12000Rpm Length: 5200mm Width: 2550mm Height: 2600mm Weight: 14000kg

Condition: ready for operation (used), throat depth: 260 mm, operating speed: 7 mm/s, reverse speed: 73 mm/s, total length: 4,270 mm, total width: 1,750 mm, total height: 2,850 mm, travel distance Z-axis: 190 mm, empty load weight: 12,000 kg, passage width: 2,550 mm, Durma HAP 200 ton x 3100 mm Capacity: 200 ton x 3100 mm Backgauge: elec Ihedsx R E Hwspfx Addst Locking speed: 100 mm/sec

Condition: excellent (used), functionality: fully functional, power: 125 kW (169.95 HP), emission class: euro5, Year of construction: 2018, operating hours: 4,500 h, Conrad Boxer 200 drilling rig with desanding unit Advanced wash drilling system, ideal for clay soils and geothermal applications. Includes 150 meters of drill pipes. The machine is equipped with a custom sand separation unit that efficiently separates clay and water, optimizing the drilling process. Hydraulically driven crawler chassis with rubber-vulcanised track shoes, track width 400 mm. Self-supporting welded steel subframe with stabilizing cylinders. Iveco NEF 45 ENT diesel engine, approx. 125 kW. Fully equipped hydraulic system with stainless steel reservoir. Modem installation for remote diagnostics. Radio remote control for travel and drilling functions. Fixed control panel with lockable enclosure. Hydraulically folding mast for 4 m drill rods. Mast translation system with 400 mm stroke. Vertical hydraulic feed system. Drill carriage and guide rail system. 4-inch hydraulic drill head Conrad T-4-5-600. Hydraulic tilting system. Weight compensator for drill rod protection. Hose and cable management system. Hydraulic top clamp. Hydraulic flushing pump. Prepared for displacement pump installation. Hydraulic piston pump. 3-inch water circuit with flow meter. Flow control valve. Hydraulic breakout clamp. Isdex Uyukepfx Addeht Drill rod storage cassette. Pipe handling manipulator. Automatic lubrication system.

Condition: new, Pleiger hydraulic motor MO 300/200 Isdpfex Uq Dcsx Addsht KM No. 6257639

Condition: excellent (used), Year of construction: 2007, Demag Concept 100/420-200 Year of manufacture: 2007 Injection Unit: Screw diameter: 25 mm Ihodpfx Ajx Uqb Ijddjt Injection pressure: 2752 bar Shot volume: 61.3 cm³ Shot weight (PS): 54 g Max. dosing stroke: 125 mm Clamping Unit: Clamping force: 1000 kN Max. opening stroke: 500 mm Min. mould installation height: 250 mm Max. distance between platen: 750 mm Platen size: 600 x 600 mm Clear tie bar spacing: 420 x 420 mm Max. mould weight: 700 kg Equipment: Core pull: 2x Mould heating: 6x Air valve: 1x Robot interface Machine is supplied with robot

Condition: used, axle configuration: 3 axles, first registration: 05/2017, total length: 14,010 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65R22.5, wheelbase: 9,110 mm, color: silver, Year of construction: 2017, Axle configuration Tyre size: 385/65R22.5 Axle brand: BPW Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Alloy rims; Lift axle; Max. axle load: 9,000 kg; Tyre tread left: 50%; Tyre tread right: 50% Rear axle 2: Alloy rims; Max. axle load: 9,000 kg; Tyre tread left: 60%; Tyre tread right: 60% Rear axle 3: Alloy rims; Max. axle load: 9,000 kg; Tyre tread left: 30%; Tyre tread right: 30% Weights Unladen weight: 7,300 kg Payload: 34,700 kg Ijdoyapgropfx Addjht Gross Vehicle Weight (GVW): 42,000 kg Maintenance APK (General Inspection): valid until 02.2026 Identification Registration number: OP-36-TG Further information Please contact Bob Beukers for more information.

Condition: good (used), Year of construction: 2000, operating hours: 28,155 h, functionality: fully functional, Bale Press Paal Konti 200 D, year of manufacture 2000, optional with matching conveyor belt Paal KEM-1400 Technical Specifications: Manufacturer: Paal Model: Paal Konti 200 D Year of manufacture: 2000 Operating hours: 28,155 Pressing force: 60 t Drive power: 45 kW Total connected load: 60 kW Feed opening: 1020 x 1400 mm Bale dimensions: 750 x 1100 mm, variable length Tying: 4-fold automatic Iedpox Tflfofx Addsht Throughput capacity at: 35 kg/m³ approx. 9.5 t/h 60 kg/m³ approx. 16.5 t/h 100 kg/m³ approx. 26 t/h Bale weight: 450 to 650 kg Transport dimensions: approx. 10,123 x 2,152 x 2,720 mm (LxWxH) Machine weight: approx. 15,000 kg Materials: Paper, cardboard, film The press is in good condition and has been inspected and tested. A video is available on our website or YouTube channel. Full documentation available. Please note: All technical data are based on information from the manufacturer. We assume no liability for the information provided or for any possible errors. The offer is non-binding, subject to prior sale, and may be revoked at any time. Inspections are possible by appointment. Sale is ex works, against advance payment, without warranty or guarantee.

Condition: good (used), Year of construction: 1981, Wedge snowplow, snow plug, dozer blade, clearing blade, snowplow, snow pusher -Manufacturer: Schulte-Henke, Snowplow type RKS 200 DFG 4035 A -Sign length: 2000 mm -Plow height: 520 mm -with: Spring-loaded flap drive-over system -Recording: Dimensions see photo technical drawing -Plow: mechanically adjustable -Attachment: to forklifts or similar -Transport dimensions: 2000/800/H660 mm -Weight: 230 kg Isdpoqxvwyjfx Addeht

Year of construction: 2023, condition: ready for operation (used), number of axes: 5, This 5-axis Mazak INTEGREX j-200S was manufactured in 2023. Ideal for complex machining tasks, it offers precision and versatility in a compact design. Consider the opportunity to buy this Mazak INTEGREX j-200S. Contact us for more information. Additional equipment • 36 tool change • Includes tailstock function Machine Benefits Technical Machine Benefits • The machine has a 36 mm tool • A 12 to 15 bar flushing system Ijdpjyaqvuofx Addeht • Tailstock function • Cooling water cooling • Bar puller function • Milling spindle 12000 rpm • Main and counter spindle • 1 degree swivel b-axis Extra Information OPM probe tool measurement Optional: Capto C6 tool holders

Condition: ready for operation (used), Year of construction: 1999, spindle speed (max.): 5,000 rpm, travel distance X-axis: 180 mm, travel distance Z-axis: 575 mm, spindle motor power: 18,500 W, total height: 1,975 mm, overall weight: 5,150 kg, controller manufacturer: MAZATROL, controller model: PC Fusion CNC 640 T, number of axes: 2, This Mazak SQT 200 MS was manufactured in 1999. A robust horizontal turning machine featuring a turning diameter of 300 mm and a length of 534 mm. It includes a spindle speed up to 5000 rpm and motor power of 18.5 kW. Ideal for precise and efficient turning operations. Contact us for more information. Machine Benefits Technical Machine Benefits • Turning length: 534 mm • Turning diameter: 300 mm Ihodpjyaqibjfx Addjt • Diameter above the bed: 350 mm • Diameter above transversing slide: 350 mm • Number of driven tools: 12 Extra Information Working condition. Full documentation available. Dimensions Machine Depth 3025 mm

Condition: ready for operation (used), Year of construction: 2010, This 5-axis Mazak Integrex 200 IV ST was manufactured in 2010, featuring high-pressure cooling at 70 bar and a 40-tool magazine complemented by 9 turret positions. It includes a SMW steady rest SR-3.1-MSW with a clamping range of 25-165 mm and two sets of SMW chuck KNCS-NB-260-78. Fully refurbished in 2020, it's prepared for a Renishaw probe and includes TOPSOLID 7.18 CAD/CAM software. Consider the opportunity to buy this Mazak Integrex 200 IV ST turn-mill centre. Contact us for more information. Ihedex Imq Espfx Addjt • 40 tools in the magazine + 9 turret positions • SMW steady rest SR-3.1-MSW, clamping range 25-165 mm • RMP60Q touch probe • Inspection Plus package • Axes: 5 • High-pressure cooling: 70 bar • SMW chuck KNCS-NB-260-78 (2 sets of base jaws) • Steadle is fully integrated into the PLC (optional extra) • CAD/CAM software with floating license TOPSOLID 7.18 • Post-processor for the specified machine • Completely refurbished in 2020 (by MAZAK) • Machine was mainly used for finishing.