Used Gastl Rg 200 for sale (60,212)

Condition: excellent (used), Year of construction: 2005, Arburg 720 S 3200-2100 Injection Moulding Machine Year of manufacture: 2005 The machine is in very good technical condition, fully operational and ready for immediate use in an industrial facility. The clamping force was factory-upgraded by Arburg to 3600 kN; the machine has received factory servicing. Clamping unit Clamping force: 3,600 kN Platen dimensions (H × W): 1,040 × 1,040 mm Tie bar spacing (H × W): 720 × 720 mm Minimum mould height: 300 mm Maximum daylight opening: 1,400 mm Injection unit Screw diameter: 70 mm Shot volume: 1,078 cm³ Shot weight: 984 g Injection pressure: 2,000 bar Electrical–hydraulic equipment Pump motor rated power: 55 kW Heater power: 30.3 kW Gtedpfx Abjx Thw Redot Dimensions and weight Net weight with control cabinet: 17 t

Condition: excellent (used), mileage: 714,843 km, first registration: 07/2007, fuel type: diesel, axle configuration: 10x4, fuel: diesel, gearing type: automatic, emission class: euro5, loading space length: 8,400 mm, loading space width: 2,550 mm, loading space height: 1,430 mm, Year of construction: 2007, Equipment: crane, XLWFM285X72117078 = Further Information = Axle Configuration Front axle 1: Max. axle load: 000 kg Front axle 2: Max. axle load: 000 kg Rear axle 1: Lift axle; Max. axle load: 7,500 kg Rear axle 2: Max. axle load: 11,500 kg Rear axle 3: Max. axle load: 11,500 kg Weights Unladen weight: 20,480 kg Payload: 31,520 kg gross vehicle weight: 52,000 kg Functional Crane: HIAB 200C, mounted at the rear of the chassis Condition Technical condition: very good Visual condition: very good Identification Registration number: BT-DZ-21 Further information Please contact Sales for further information. = Company Information = Gtsdpfx Asutn Erjbdot If you have any questions or suggestions, don’t hesitate to contact us. We guarantee a response within 8 hours. Prices are excluding VAT. No rights can be derived from the above information. Office Phone: MOB: Nederlands - English - Deutsch - Francais - Español - Italiano (available via WhatsApp and Viber) MOB: Nederlands (available via WhatsApp and Viber) For bank transfers, please ensure that the payment is made to our bank account as listed below. Always verify the payment details that are published on our website. If you receive alternate information, please contact us. In case of any doubts, please call us to verify the invoice and/or payment. Bank details: Rabobank Laan van Limburg 2 4701BP Roosendaal IBAN: NL 89 RABO EORI/VAT/TAX: NL857401B(01) BIC/SWIFT: RABONL2U

Condition: used, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 07/2003, loading space length: 13,580 mm, loading space width: 2,510 mm, loading space height: 2,390 mm, Equipment: ABS, SCHMITZ CARGOBULL SKO 24 CARRIER MAXIMA 1200 SAF AXLES ----VEHICLE HISTORY 1st OWNER GERMAN VEHICLE VIDEO AVAILABLE ON REQUEST Gtsdpew Ua Txsfx Abdst ----VEHICLE SPECIFICATION SKO24 REFRIGERATED BOX TRAILER ----REFRIGERATION UNIT CARRIER MAXIMA 1200 AR3P SAS ENGINE HOURS: 2,460 HRS YEAR: 2003 400V 22A 102.2 dB ----CHASSIS AND AXLES DISC BRAKES 3 AXLES FULL AIR SUSPENSION 1x TOOLBOX SAF AXLES ALL TYRES: 385/65R22.5 ----INTERNAL DIMENSIONS LENGTH: 13.58M HEIGHT: 2.39M WIDTH: 2.51M ----IMMEDIATELY AVAILABLE! ----EXPORT SALES ONLY WITH DEPOSIT (MIN. €500 - €2,000) EXPORT SALES ONLY WITH DEPOSIT OF MIN. €500 - €2,000 ----EXPORT CUSTOMS DECLARATION EXW IN 10 MIN. (APPROVED EXPORTER) 5-DAY, 30-DAY NUMBER PLATES AND 17 - 21 DAYS AUSTRIAN PLATES EURO 1 VEHICLE RESERVATION ONLY VIA EMAIL FUNCTION VERBAL RESERVATIONS ARE NOT VALID! For sales to EU and third countries, a deposit of at least €500 / €1,000 will be charged. Modifications, errors and prior sale reserved! More vehicles available on our homepage. Sales exclusively in accordance with our terms and conditions - see homepage. Important Notice – Important Information: Despite careful verification of all details in our listing, errors may occur. Some may be due to transmission errors in the systems of various platform providers. Therefore, we hereby inform you that all information is non-binding and does not constitute a legal claim. Legal notice: This sales advertisement does not represent an offer within the meaning of §145 BGB. Rather, it is information to initiate a contract. The details provided here are non-binding and do not constitute guaranteed characteristics.

Condition: good (used), Year of construction: 2004, operating hours: 29,461 h, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 55 mm, injection weight: 140 g, For sale: a well-maintained Arburg 570C-2000-350 2K injection moulding machine from 2004, with only approximately 30,000 operating hours. The machine is in good technical condition and is immediately ready for production. Specifications: Model: Arburg 570C Clamping force: 2000 kN Screw diameter: 35 mm (350) Year of manufacture: 2004 Gedpfjxyyxqjx Abdstt Operating hours: approx. 30,000 Control system: Arburg Selogica Configuration: Standard injection moulding setup, reliable and versatile Condition & Maintenance Machine always serviced as per schedule No significant fault history Clean and fully functioning hydraulic and electrical system Extras (optional) Other screw sizes available.

Condition: excellent (used), Year of construction: 2011, Arburg 1500T 3200-1300 e² / hybrid machine with one rotary table Year of manufacture: 2011 Injection unit: Screw diameter: 60 mm injection weight: 607 g Injection pressure: 2000 bar Metering volume: 664 ccm Clamping unit: clamping force: 320 t tie bar distance: 0x0 mm size of clamping platens: 1510 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA - touch screen Gtedpfx Aox Nhp Sjbdet Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 30.000 in automatic mode Euromap 67 Robot interface Control with air valve Hydraulic core pull x 3 Control with hot runners x 13 Injection unit hardened - bimetal Main machine motor - servo motor driven by inverter Very precise rotary table driven by servo motor controlled by inverter Rotary table diameter: 1500 mm Horizontal injection unit with automatic injection height adjustment Self-closing nozzle Primus sensor - mold pressure control It is possible to convert the injection unit so that it works vertically Dimensions: Weight: 16080 kg Length/width/height: 4.91x2.12x4.62 m All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: used, mileage: 30,975 km, first registration: 06/2006, fuel type: diesel, tire size: 315 / 70 / R22.5, axle configuration: 4x2, fuel: diesel, color: orange, driver cabin: day cab, gearing type: automatic, number of gears: 4, suspension: steel, Year of construction: 2006, Technical information Number of cylinders: 6 Transmission Transmission: Allison, 4 gears, Automatic Axle configuration Tyre size: 315 / 70 / R22.5 Make axles: Terberg Brakes: drum brakes Suspension: leaf suspension Front axle: Max. axle load: 10000 kg; Steering; Tyre profile left: 30%; Tyre profile right: 30% Rear axle: Double wheels; Max. axle load: 25000 kg; Tyre profile left inner: 70%; Tyre profile left outer: 70%; Tyre profile right outer: 70%; Tyre profile right outer: 70%; Reduction: hub reduction Interior Interior: grey History Gtedpfx Absxx Sw Aedot Number of owners: 1 Condition General condition: average Technical condition: average Visual appearance: good Number of keys: 1 Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: excellent (used), Year of construction: 2018, Clamping force: 200 t Screw diameter: 55 mm Gsdsx Ir Ngopfx Abdett Shot weight: 434 g Distance between tie bars V: 570 mm Distance between tie bars H: 570 mm Shot volume: 474 cm3 Platen dimensions : 795 x 795 mm Working hours: 25.969 h Type: Horizontal Drive: Hydraulic Equipment: 1x core puller Euromap 67

Condition: excellent (used), Year of construction: 2014, operating hours: 32,827 h, functionality: fully functional, machine/vehicle number: 230239, clamping force: 2,000 kN, screw diameter: 40 mm, displacement volume: 201 cm³, injection pressure: 2 bar, injection weight: 184 g, overall weight: 11,200 kg, Here we offer the following well-maintained used injection moulding machine as part of our injection moulding machinery trading operations. Of course, we also purchase well-maintained injection moulding machines manufactured from 2010 onwards. We have been wholesalers of used injection moulding machines for over 25 years. Special notice – Tax advantage for used machines As of 01.07.2025, used machines are also eligible for a special depreciation of 30% per year. In addition to the favourable price compared to new machinery, you can claim the same depreciation rates as for a new machine. Keyword: Growth Booster (§ 7 paragraph 2 EStG-E) Arburg 1500T 2000-400 Rotary Table Vertical Machine Machine no.: 230239 Full equipment details are listed in the downloadable documentation – machine card. Control system: Selogica Year of manufacture: 2014 Total machine cycles: only 1,469,728 Automatic operating hours: 32,827 h Clamping Unit Platen distance: 700 mm Clamping force: 200 t / 2000 kN Mould installation height: 400 mm Table diameter: 1500 mm Rotary angle: 180° Rotation time: min. 2.4 s Permissible load on rotary table: 1,050 kg Ejector force: 45 kN / 175 mm stroke Injection Unit Screw diameter: 40 mm Stroke volume: 201 cc Injection weight: 184 g Injection pressure: 2,000 bar Gtodpfouuf Iajx Abdot Special Features - 2-station, 180° alternating rotary table with servo-electric drive and hydraulic locking pin for precision centering of the rotary plate in end position; separated safety guard between clamping and loading area, adjustable in height on the rotary plate to suit mould base plates, with provision for media lines and connections for mould bases - Rotary table diameter: 1,500 mm - Max. clamping force: 2,000 kN - Injection unit to EUROMAP 400 - Screw diameter: 40 mm - Special ergonomic rotary table design with the following features: o Corrosion protection for the rotary table (VE 574/90) o Water connections: 2 circuits o 3 hydraulic connections for needle valve system o 3 core pulls o Per station: 1 core pull and 2 tempering circuits o 6 mould temperature control circuits o 12-zone mould heating circuits o Kistler cavity pressure sensors (2x) o Temperature query for start-up components Weight: 11,200 kg Power: 22 kW motor – heating capacity: 9.4 kW (5 zones) – rated connection: 100 A The machine is offered after comprehensive functional testing, fully operational with commissioning warranty, and tested prior to dismantling. Further information about our offered machines and our company: - We only sell machines that we have acquired from active production, from our own warehouse in Hannover - All machines are checked and tested before removal - We do NOT sell insolvency assets – we are NOT brokers trading in third-party property - All machines offered come from successful businesses, where regular maintenance and care are standard - All machines offered can be inspected at our warehouse

Condition: good (used), Year of construction: 1999, operating hours: 95,239 h, functionality: fully functional, machine/vehicle number: 173937, clamping force: 2,000 kN, screw diameter: 55 mm, clearance between the columns: 520 mm, mold height (min.): 250 mm, total length: 5,100 mm, total width: 1,800 mm, total height: 2,200 mm, overall weight: 6,630 kg, Equipment: documentation/manual, The machine ran perfectly until the last day before the new machine was delivered to us. The machine is therefore in good used condition. Due to a lack of space in the injection molding shop, the machine is being sold and is no longer powered. The pump / injection unit / clamping unit are sealed. The machine manual is available Videos of the machine are available Pump operating hours: 95239 Automatic operating hours: 86082 Repairs from recent years: Filter replaced annually 05/2024 Fan in the control cabinet replaced 07/2023 New valve for Y201 and Y210 nozzle forward/backward 02/2023 New keypad installed. Field with motor and heater 12/2022 Ejector sealed. Injection unit sealed including new piston Gtedjv D Nxljpfx Abdot

Condition: excellent (used), Year of construction: 2018, operating hours: 20,500 h, functionality: fully functional, 1,0 St. gebr. Zweikomponenten Spritzgießmaschine mit SECHS ACHS Roboter Hersteller: ARBURG Typ: 570S2200-400/170 Baujahr: 2018 Schließkraft: 220 Tonnen Holmabstand 570 x 570 mm Einbauhöhe min. /max.: 350 mm Öffnungsweg: 1.000 mm Schnecken DN 1: 40 mm Max. Hubvolumen: 201 cm³ Spritzteilgewicht: 184 g/PS Schnecken DN 2: 25 mm Hubvolumen: 59 cm³ Spritzteilgewicht: 54 g/PS Steuerung: SELGOCIA Ausstattung: 3 x Kernzüge Vertikale Spritzeinheit Verlängerte Holme Vorverlegter Zylinder 6 - ACHS Roboter, Hersteller: KUKA, Typ: KR 16 Wikut, Baujahr: 2018 Gsdeu E Id Tspfx Abdett Förderband Schutzzaun

Condition: excellent (used), Year of construction: 2016, Arburg 570S 2200-290/100/100 / Production line with the Wittmann W823 robot / Operating hours: 20,499 h in automatic mode Year of construction: 2016 Injection unit: Screw diameter: 35 mm Injection weight: 132 g Injection pressure: 2000 bar Metering volume: 144 ccm Clamping unit: Clamping force: 220 t Distance between tie bars: 570x570 mm Size of the clamping platens: 795x795 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA touchscreen Additional equipment: 3-component injection molding machine, high speed Very good technical condition Operating hours: 20,499 h in automatic mode Euromap 67 Robot interface Air valve x 6 Hydraulic, needle core pull, controlled by a proportional valve x 4 Control unit with hot runners Hardened injection unit - bimetal Gsdpfex Nhprsx Abdstt Proportional valve on the injection unit - precise injection Machine with two cylinders / battery with compressed nitrogen (additional charge for fast work) The machine is designed for operation with an electric turntable. The machine has an inverter to control the servomotor in the rotary table and an interface for connecting the rotary table Parallel movements Screw diameter in the vertical injection unit: ⌀25 mm - 45 g/hp Screw diameter in the lateral injection unit: ⌀25 mm - 45 g/hp Wittmann W823 robot Year of construction: 2015 5-axis robot: 3 axes are driven by servomotors (electric); axis C and movement A Travel in axes: X-550, Y-1400 (telescopic), Z-3500 Touch control panel The safety package for robots Robot with adapter, conveyor belt and protective housing Purchase of the robot and conveyor belt for an additional charge Dimensions Weight: 10830 kg Length/width/height: 5.53x1.77x3.29 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: used, maximum load weight: 30,443 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 06/2017, loading space length: 13,600 mm, loading space width: 2,500 mm, loading space height: 2,700 mm, Year of construction: 2017, Equipment: ABS, * SCHMITZ CARGOBULL * 3-axle refrigerated semi-trailer SCBS3 * SKO/24/L - 13. FP 45 COOL * From 1st owner (Germany) with only approx. 2,200 h diesel / 600 h electric operation * SC axles * SC refrigeration unit * 1 lift axle * Air suspension * Rear portal doors Gtedpswyhzcefx Abdot * Pallet box * Tyres: 50% (385/65 R22.5) * Dimensions: L-13,600 B-2,500 H-2,700 mm int. dim. * Gross weight: 39,000 kg * Unladen weight: 8,557 kg * Payload: 30,443 kg * Colour: white with lettering, black chassis * etc. ---- Subject to prior sale and errors! No guarantee for function of extras! We also speak: ENG / ITA / HR / SRB / BiH Your contact: Ludvig Kozuha, Mobile WhatsApp, Viber Over 20 years of experience in commercial vehicle trading! - RELIABLE & FAIR - Former DAF contract partner!

Condition: like new (used), Year of construction: 2019, Arburg 1200 T 2000-800 Clamping unit 2000T Table diameter: 1200mm Angle rotation: 180 degrees Clamping force: 200 tons Opening force max. kN/mm: 115/500 Injection unit Screw diameter: 45 mm Shot volume: 318 cm3 Shot weight: 291 g Injection pressure: 2470 bar 1. Model: T model 2. Machine type: 1200 T 2000 - 800 3. Plasticizing unit: Thermoplastics cylinder 45 mm, highly wear-resistant 4. Screw: Reinforced screw coupling for splined coupling geometry 5. Control system: SELOGICA ‘direct’ controller 6. Technology stage: Stage 2 servo-regulated with 2 control pumps 7. Rotary table: Advanced ergonomics special model, 2-station 180° forward/backward alternating 8. Nozzle: Open nozzle 45 mm with nozzle tip 9. In-mould needle nozzles: Electric & hydraulic control for needle nozzle 1, electric & pneumatic control for needle nozzle 2 10. Heating: Heater band for open nozzle, 9 electric heating control circuits for mould heating 11. Clamping platen: Mould mounting platen set, central diameter 125 mm 12. Blow unit: Mould blow unit with pressure reducer at station 1 13. Safety: Optical barrier at loading station, continuous oil cooling and filtration 14. Hopper: Adapter (extension) for feed hopper, machine delivered without 50 L hopper 15. Robot interface: Interface for robot system for station 2 & 3 (based on EM67/1) 16. Electric axes: Basic equipment for electric axes control 17. I/O: 4 programmable inputs/outputs on terminal rail Gtodpfjwugczox Abdjt 18. Sockets: Additional socket combination (1 CEE, 1 Schuko) 19. Interfaces: Temperature control device interface (REGLOPLAS), printer USB interface, Compact Flash, EUROMAP 65 chip card user authorisation 20. Acoustic alarm: Error alarm acoustic signal 21. Safety interlock: Interface for safety interlock of door (EUROMAP 73) 22. Cooling circuits: 3 regulated machine-related cooling circuits with flow indicator, 3 manually adjustable cooling circuits for second water manifold 23. Anti-corrosion: Anti-corrosion treatment for rotary table, sealing lip on outer diameter 24. Manual & labels: CD operating manual & spare parts list, Slovak language labels 25. Machine feet: Anti-vibration footplates 26. Other: Hydraulic ejector, external cycle start key, standard equipment packages, new ARBURG colour scheme 27. Display languages: IT/EN/SK

Condition: excellent (used), Year of construction: 2007, operating hours: 53,000 h, functionality: fully functional, machine/vehicle number: 206432, clamping force: 2,000 kN, screw diameter: 50 mm, clearance between the columns: 570 mm, displacement volume: 392 cm³, injection pressure: 2,000 bar, ejector stroke: 225 mm, overall weight: 7,450 kg, Equipment: documentation/manual, Here we, as a dealer in injection moulding machines, are offering the following well-maintained used injection moulding machine: Of course, we also purchase well-maintained injection moulding machines manufactured from 2010 onwards. We have been a wholesaler of used injection moulding machines for over 25 years. Current note – Tax notice and advantage for used machines: As of 01.07.2025, used machines will also be eligible for a special depreciation of 30% annually for tax purposes. Manufacturer: Arburg Model: 520C 2000-800 GE Serial number: 206432 Year of manufacture: 2007 Operating hours: approx. 53,000 Control system: Selogica Dimensions (L/W/H): 5.53 x 1.80 x 2.20 m Weight: 7,450 kg Functional condition: Fully operational Condition: Very well-maintained – German origin Extras: - Thermoplastic cylinder complete, 50 mm, highly wear-resistant - Screw in HC version instead of standard - Selogica direct control - Hydraulic system with 2 variable-displacement pumps - Anniversary model GOLDEN EDITION - Thermoplastic processing - Open nozzle 50 mm - Nozzle tip 50 mm extended - Heating band for open nozzle - Heating band for extended nozzle tip - Central clamping platen set 570, center Ø 125 mm - 2-piece air blast device with pressure regulator - Air blast device connection 1 - Selector unit connection - Core puller 1 for serial motion holding pressure via check valve - Conveyor belt connection via 5-pin socket - Robot interface (per EUROMAP 67), 50-pin - ARBURG host computer interface - Additional socket distributor: 1x CEE, 1x Schuko - Serial printer interface USB - CompactFlash interface for data set storage - Operation authorization with chip card per EUROMAP 65 - 1 additional heating control circuit for nozzle or adapter with socket - Dosing unit interface - Free cooling circuits, manually adjustable - Machine-specific cooling circuits controlled - Extended monitoring package - Extended motion package - Production control package - Optimization / operator assistance package - Quality assurance package - Documentation package Complete documentation included. Injection unit: Screw diameter: 50 mm Shot weight: 359 g/PS Gtsdew Tt R Ispfx Abdet Injection pressure: 2000 bar Shot volume: 392 cm³ Clamping unit: Clamping force: 200 t / 2000 kN Tie bar spacing: 570 x 570 mm Mounting plates: 795 x 795 mm Mould installation height: 300 mm Max. platen distance: 950 mm Opening stroke: 650 mm Ejector stroke / force: 225 mm / 66 kN Clamping unit: hydraulic Motor power: 22 kW Heating power: 19.9 kW / 8 heating zones Total connected load: 45 kW The machine is available for immediate delivery at our warehouse in Hannover, Germany and has been tested. Warranty: Warranty until initial commissioning. Loading/shipping: Free loading onto the buyer's truck or free delivery within Germany (freight charge applies) Available from our warehouse in Hannover, Germany. For your information regarding our machines and company: - We sell only our own machines purchased from ongoing production at our Hannover warehouse. - All listed machines are inspected and tested prior to removal. - We do NOT sell insolvency assets – we are NOT brokers handling third party property. - All offered machines come from successful businesses where proper maintenance is standard practice. - All machines offered are available for viewing at our warehouse.

Condition: ready for operation (used), functionality: fully functional, clamping force: 800 kN, clearance between the columns: 1,200 mm, ARBURG 1200 T 800-150 MACHINE DETAILS Operating Hours Machine Cycles: 2,426,431 Pump Operating Hours: 38,226 h Automatic Operation Hours: 30,517 h FTP ATR-25 Q Gsdpfx Aex Af S Uobdstt MACHINE DETAILS Weight: 1,400 kg Note: Further information regarding the machine configuration can be found in the attached document.

Condition: excellent (used), Year of construction: 2010, operating hours: 44,600 h, functionality: fully functional, 1,0 St. gebr. Zweikomponenten Spritzgießmaschine mit Roboter Hersteller: ARBURG Typ: 570S2200-400/170e² Baujahr: 2010 Schließkraft: 220 Tonnen Holmabstand 570 x 570 mm Einbauhöhe min. /max.: 350 mm Öffnungsweg: 1.000 mm Schnecken DN 1: 35 mm Max. Hubvolumen: 154 cm³ Spritzteilgewicht: 141 g/PS Schnecken DN 2: 30 mm Hubvolumen: 59 cm³ Spritzteilgewicht: 47 g/PS Steuerung: SELGOCIA Gtsdpfou E E H Sex Abdet Ausstattung: 3 x Kernzüge Vertikale Spritzeinheit 6 - ACHS Roboter, Hersteller: KUKA, Typ: KR 16 Wikut, Baujahr: 2010 Förderband Schutzzaun

Condition: excellent (used), Year of construction: 2011, Arburg 570H 2000-800 e² / Hybrid Machine / Production Line with Arburg Multilift Select Robot Year of Manufacture: 2011 Injection Unit: Screw diameter: 50 mm Shot weight: 359 g Injection pressure: 2000 bar Dosing volume: 392 cc Clamping Unit: Clamping force: 200 t Tie bar spacing: 570x570 mm Platen size: 795x795 mm Ejector: electric Clamping unit: toggle lever Control System: SELOGICA - Touchscreen Additional Equipment: Hybrid machine: high-speed, energy-saving, and very quiet Euromap 67 Robot interface Air valves x 4 Hydraulic core pull x 2 Gtodjx Nhplepfx Abdjt Controller with 12 hot runner zones Injection unit hardened - bimetallic Main motor of the machine: servo motor driven by inverter – energy saving Injection unit driven by a servo motor, controlled by an inverter Machine with cylinder / battery with compressed nitrogen (additional charge for fast operation) Central lubrication system Parallel motions Arburg Multilift Select robot, 6 kg transverse Year of manufacture: 03.2011 4-axis robot: 3 axes driven electrically by servo motors; C-axis pneumatic Travel distance in axes: X-400, Y-800, Z-1400 Robot with adapter, conveyor belt, and safety enclosure The purchase of the robot and conveyor belt is available for an additional charge Dimensions: Weight: 8700 kg Length/Width/Height: 5.58x1.71x2.21 m All machines offered are started up and tested by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 193818, clamping force: 2,000 kN, screw diameter: 50 mm, clearance between the columns: 470 mm, injection pressure: 2,080 bar, injection weight: 297 g, ejector stroke: 225 mm, opening stroke: 650 mm, plate width: 685 mm, plate height: 685 mm, installation height: 250 mm, total length: 5,500 mm, total width: 1,600 mm, total height: 2,160 mm, overall weight: 6,630 kg, number of injections: 1, input current: 125 A, Equipment: documentation/manual, All items are sold as used and untested unless otherwise specified. Only the injection moulding machine is offered for sale, without handling device or accessories. Please pay attention to the item description. Gtodpfx Aoxy Iugjbdst

Condition: used, Year of construction: 2001, Technical details: screw diameter: 30 mm closing force max.: 2000/ bei 175 bar kN opening force: 10 t screw revolutions per minute : 100 U/min control: FA-Inject 2000SIJECT OP37 system pressure: 175 bar injection pressure max.: 1600 bar injection volume max.: 800 cm³ closing speed: 200 mm/min ejection stroke: 150 mm force of ejector: 120 kN Godpfx Aeu Nu N Rsbdjtt opening stroke: 550 mm daylight: 700 mm total power requirement: 36,5 kW weight of the machine ca.: 6,0 t dimension machine xH: 3,0x1,9x3,9 m dimensions electric cabinet LxWxH: 0,8x0,6x2,15 m Plastic Injection Molding Machine - Elastomer Injection Moulding Machine - with heatable support table and heatable tool supporting plate - best suited for the production of special sealing products - tank volume hydraulics 110 l, heating and cooling method thermal oil circulation system, nozzles stroke 20mm - nozzle type: single nozzle, heating capacity per heating plate: 8,1 kW, heating plate size 600x500mm, heating plate temperature=250°C The machine is not connected. We sell the machine as described and as is *

Condition: used, Year of construction: 2004, clamping force: 130 kN, displacement volume: 230 cm³, injection pressure: 1,670 bar, overall weight: 4,500 kg, load hours: 60,000 h, screw conveyor diameter: 45 mm, terms of delivery: EXW (ex Works) Gjdpfx Aboxqhr Tjdett delivery time: on request terms of payment: 100% prior to delivery

Condition: good (used), Year of construction: 2005, Arburg 820 S 4000-3200 (2005) The machine has 2x hydraulic cores and 9 hot runners. Clamping Force: 400 ton Screw Diameter: 90 mm Shot Weight: 1860 g Injection Volume: 2036 cm³ Injection Pressure: 1580 bar Opening Stroke: 700 mm Distance Between Tie Bars: 820 × 820 mm Mould Height Min/Max: 350 – 850 mm Opening Width: 1050 – 1550 mm Platen Size (h × v): 1171 × 1171 mm Gtsdpfexhdgzjx Abdot Machine Dimensions (L × W × H): 8,3 × 2,3 × 2,4 m Machine Weight: 22 500 kg Working hours : 79.000

Condition: like new (used), Year of construction: 2017, operating hours: 16,000 h, functionality: fully functional, 1,0 St. gebr. Zweikomponenten Spritzgießmaschine Hersteller: ARBURG Typ: 720A3200-800/70 Baujahr: 2017 Schließkraft: 320 Tonnen Holmabstand 720 x 720 mm Einbauhöhe min. /max.: 300 - 800 mm Öffnungsweg: 600 mm Schnecken DN 1: 50 mm Max. Hubvolumen: 392 cm³ Spritzteilgewicht in PS: 359 g Schnecke DN 2: 22 mm Max. Hubvolumen: 34 cm³ Spritzteilgewicht in PS: 31 g Gjdpfxev S E Dgj Abdjtt Steuerung: Selogica Technische Ausstattung anfordern.

Condition: excellent (used), Year of construction: 2003, Arburg 570C 2000-350/150 / Production Line with Side-mounted Arburg Multilift Robot / 2K Machine Year of Manufacture: 2003 Gtsdpjx Nhn Ujfx Abdot Injection Unit: Screw diameter: 40 mm Shot weight: 153 g Injection pressure: 2,120 bar Dosage volume: 182 ccm Clamping Unit: Clamping force: 200 t Tie bar spacing: 570x570 mm Platen size: 795x795 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Additional equipment: Production line with side-mounted Arburg Multilift robot 2K (two-component) machine Air valve x 1 Hydraulic core pull x 5 Control system with hot runner integration Reinforced injection units – bimetallic Proportional valves on injection units – precision injection Vertical injection unit – screw diameter: ⌀25 mm – 49 g/PS All machines offered are started up by our service technicians prior to sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Condition: like new (used), Year of construction: 2022, operating hours: 8,000 h, functionality: fully functional, 1,0 St. gebr. Zweikomponenten Spritzgießmaschine Hersteller: ARBURG Typ: 570A2000-400/70 Baujahr: 2022 Schließkraft: 200 Tonnen Holmabstand 570 x 570 mm Einbauhöhe min. /max.: 350 mm Öffnungsweg: 1.000 mm Schnecken DN 1: 35 mm Max. Hubvolumen: 154 cm³ Spritzteilgewicht in PS: 141 g Schnecke DN 2: 25 mm Max. Hubvolumen: 44 cm³ Gtsdpfx Aevftnasbdst Spritzteilgewicht in PS: 40 g Steuerung: Selogica Technische Ausstattung anfordern.

Condition: excellent (used), Year of construction: 2005, Arburg 1200T 800-150 / Vertical Injection Molding Machine with Rotary Table Year of Manufacture: 2005 Injection Unit: Screw Diameter: 25 mm Injection Weight: 45 g Injection Pressure: 2500 bar Dosing Volume: 54 cc Clamping Unit: Clamping Force: 80 t Tiebar Distance: 0 x 0 mm Gsdpfx Abox Ng R Ujdett Clamping Platen Size: 1200 mm Ejector: Hydraulic Clamping Unit: Hydraulic Control System: SELOGICA Additional Equipment: Air Valves x 6 Hydraulic Core Pullers x 6 Control System with Hot Runners Injection Unit Hardened - Bimetal Rotary Table Diameter: 1200 mm Kistler Sensor - Mold Pressure Control Machine serviced by the authorized Arburg Service Center in Germany Dimensions: Weight: 7400 kg Length/Width/Height: 3.92 x 1.61 x 3.78 m Drive: Pump/Motor: 22 kW Heating power: 9.4 kW Total power: 31.4 kW All offered machines are started by our service technicians before sale. You can receive a video of the technical tests of the selected machine or participate in live technical tests at our facility in Łódź. Price: Upon request