Used Gea Ahlborn for sale (194)

Year of construction: 1990, condition: used, 2 caustic tanks and 1 acid tank, all heatable with hot water. Additional title: heatable, vertical stainless steel vessel Volume appr.: 1000 l Width: 1 m Iisdpfx Abexwy T Nepjf Height: 2 m Weight: 250 kg Material: Stainless steel Position: free standing Base construction: Cylindrical tank with square tubular feet on spherical caps Features: Top lid, temperature measurement, equipment for heating with hot water

Condition: used, Flash pasteurising to stabilise beverage quality. The product is heated via a plate heat exchanger and held at pasteurising temperature for a defined amount of time, after which it is then cooled down again. Capacity: 350 hl/h Operation / Control: Excluding control cabinet with software. Software can be delivered by agreement Features: 1x plate heat exchanger, 1 tube heat exchanger, 1x hot water pump, 2x beer pump Isdpfjxbn Ucex Abpjif

Condition: used, Year of construction: 2013, Additional title: high pressure homogenizing Capacity range: 600 l/h Pressure: 250 bar Iedpfx Abevcq Edopeif Cellular particle size: 1 μm cellular particle Length: ca. 2,2 m Width: ca. 2,5 m Height: ca. 1,9 m Operation / Control: Integrated in a ProLeit process control, the motor was controlled by an external frequency converter. Features: CIP-able, SIP-able

Condition: used, Year of construction: 2009, 2 GEA NH3 refrigeration compressors with frequency control (from a refrigeration system with max. 180 kW) Capacity: 145 m³/h each Additional title: Refrigerant NH3 Capacity: 145 m³/h Power: 37 kW Ijdpfsxzqtnsx Abpoif Weight: 132 kg Position: Screwed onto concrete base Features: 2 x compressors: 145 m³/h, 26 kW with frequency converter, 37 kW rated power

Condition: like new (used), Year of construction: 2013, This floor-standing machine is designed for mixing a large number of dry products. Thanks to the planetary motion of the mixing tool, intensive and homogeneous mixing is achieved. The system consists of a stainless steel vessel—material 316L, mirror-polished, Ra < 0.8 µm—and a stainless steel housing, in which the vessel lid with the integrated mixing units and drives is installed. The mixing vessel has a capacity of approximately 90 liters (usable volume approx. 30 to 60 liters) and is placed and clamped onto two arms. The mixing material is filled in, after which the vessel is raised hydraulically, causing the mixing tool to immerse into the product. The mixer is equipped with a 45° spiral-shaped stainless steel mixing tool; the speed can be regulated via a gearbox. The mixing speed is adjustable—48, 82, 135, and 231 rpm. Vessel discharge is performed via a centrally located bottom outlet. Iedjx Antujpfx Abpsif Operation and control, including recipe and batch management, is performed via an operator panel on a separate stainless steel control cabinet. The operating language is English. The system is prepared for use in ATEX-rated (explosion-protected) areas. Electrical configuration: 230/400V, 3-phase, 50 Hz, IP55 Space requirement: 90 x 130 x 235 cm Weight: approx. 850 kg

Year of construction: 2000, condition: excellent (used), Used high pressure homogenizer NS5160HA made by GEA Niro Soavi with an operating pressure of 700 bar and a throughput of 7.000 l/h. Sanitary version with five ceramic pistons, an operating temperature of 40°C and a maximum viscosity of 12.000 cP. Powered by an electric motor with 160 kW which needs three-phase current at 380 V and 50 Hz. The homogenizer was regularily checked and maintained and is fully functional. Iiedehzcxropfx Abpef

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, overall weight: 2,000 kg, rotational speed (max.): 4,700 rpm, total height: 1,500 mm, total length: 3,300 mm, total width: 870 mm, power: 22 kW (29.91 HP), TECHNICAL DETAILS Drum diameter: 340 mm Maximum drum speed: 4,700 rpm g-factor: max. 4,198 g MACHINE DETAILS Main motor power: 22 kW Secondary motor power: 11 kW Motor operation: Frequency converter Isdpsy Hiv Uofx Abpoif Drive system: Summation drive Inlet and outlet connections: DIN 11864-2 DN40 / DN25 Dimensions & Weight Dimensions (L x W x H): 3,300 x 870 x 1,500 mm Weight: 2,000 kg EQUIPMENT Temperature sensors on both drum bearings Level monitoring for gearbox oil and oil-air lubrication Pressure sensor for oil-air lubrication Vibration monitoring: continuous monitoring of drum bearings on both sides Speed monitoring via proximity sensors Further configuration details can be found in the attached document.

Condition: used, Year of construction: 2010, operating hours: 47,000 h, machine/vehicle number: LC582, Used Complete Krones PET Bottling Line – 22,000 BPH – OverviewUsed Complete Krones PET Bottling Line – 22,000 BPH – Overview This second hand, ultra-clean Krones PET bottling line is a complete, high-efficiency solution for beverage production and industrial packaging across cider, sparkling water, still water and CO2-mixed juices. Built by Krones and GEA in 2010 and kept in production with OEM service, the line delivers up to 22,000 bottles per hour (0.5 L) and 18,000 bph (1.5 L), combining a Contiform S12M blow molder directly coupled to an ultra-clean isobaric filler-capper bloc. It is a market-ready used bottling line designed for reliability, hygiene, and quick format changeovers in PET.Technical Specifications & Performance DataManufacturer: Krones and GEAYear of manufacture: 2010Working hours: approx. 47,000Nominal capacity: 22,000 bph (0.5 L) | 18,000 bph (1.5 L)Products handled: cider, sparkling water, still water, juices with CO2Filling technology: Ultra-clean, isobaric, volumetric PET fillingCurrent product: Apple juice with water and CO2Neck finishes: PCO 1810, PSO 28 mm, 1810/1881 short neckControls: Siemens Simatic S7 PLC platformMain Equipment ScopeCIP: Krones VarioClean F AUT fully automatic CIP system, 4 x 5000 L, 30 m³/hProcess: GEA TDS plant with flash pasteurizer, mixer, carbonator, degasser and process tanksPreforms: Preform tipper/kipper and feeding conveyors; Krones Contifeed RS preform feeding system; Prejet Linear preform cleaning unitCaps: Cassner cap feeding with cap rinsing and sterilizationBlow molder: Krones Contiform S12M, directly connected to the ultra-clean bloc (no air conveyor)Filler/Capper bloc: Krones Volumetric VODM-PET 2.160-66-103 with integrated capper; Krones Vario Dos filler-bloc cleaningCoding and inspection: Domino DDC 3 laser coder; Krones Checkmat 731 FM-X+L filling level inspector; Krones Checkmat 731 EM label inspectorConveying and testing: SYNCO bottle conveyors; Krones Flowliner bottle leak testerLabeller: Krones Contiroll OPP 720-15, double roll-feed wrap-around labels with hot glueSecondary packaging: Krones VarioPro FS shrink–tray packer; Krones Multico S packet conveyors; Twin Pack handle applicatorPack coding: Leisinger Jet 3 ink coderPalletizing: Krones Robopox Modulpal (2016)Advanced Automation & Control Systems Line Control & PLCSiemens Simatic S7-series PLC for coordinated line control, interlocks and diagnosticsIntegrated filler-bloc cleaning via Krones Vario Dos for validated ultra-clean cyclesRecipe and parameter management supporting fast changeovers between PET formats Iisdpfx Asyhbmtjbpsf

Condition: excellent (used), functionality: fully functional, Slicer line CFS type UniSlicer with MC control, fully stainless steel, including: - CFS Check DC 2000 MK3 (scale) - CFS Horizontal Distributor - CFS discharge conveyor ATB 3100 MM - Accessories & documentation - Several spare parts Machine entirely made of stainless steel. Iisdpsyk D Hbjfx Abpsf

Condition: used, The Alfa Laval M10-MBASE is a compact and highly efficient plate heat exchanger, designed for demanding applications in the beverage and food industry, chemical processing, and general heating and cooling duties. Technical Specifications Type: M10-MBASE Heat transfer area: 2.6 m² Plate material: Stainless steel Alloy 316, thickness 0.50 mm Gasket material: NBRFF Clip-On (Nitrile rubber) Plate pack thickness: 63 mm Total weight: 232 kg Total volume: 13 liters Dimensions: Height 672 mm, width 618 mm, depth 530 mm Connection standard: DIN NW100 Bolts: M20 Expandable: up to 17 additional plates Operating Data Design pressure: 10 bar Test pressure: 14.3 bar Design temperature: up to 120 °C Minimum temperature: 0 °C Typical flow examples (according to datasheet): Wine: 2,000 L/h (heating 12 → 17 °C, Δp = 47 kPa) Hot water: 2,000 L/h (cooling 30 → 24 °C, Δp = 22 kPa) Fruit juice: 240 L/h (heating 21 → 75 °C with 90 °C hot water, Δp ≈ 40–50 kPa) Iiodpfjxytv Nox Abpsf Design Features Plates with parallel flow channels ensure high efficiency and low pressure drop. Clip-on gaskets for easy maintenance and cleaning. Robust frame and pressure plate construction with M20 tightening bolts (length 360 mm). Flexible capacity expansion, up to 17 additional plates can be installed. User-friendly assembly with clear A/B plate markings. Typical Applications Beverage pasteurization (e.g., wine, juice, beer) Hot water and cooling water circuits CIP cleaning systems General process heat transfer in industrial applications

Condition: used,

Condition: used, Year of construction: 2020, functionality: unexamined, machine/vehicle number: 1739-596, rotational speed (max.): 4,800 rpm, Equipment: type plate available, Used disc stack separator for fermentation lees separation. Machine mounted on a complete skid with the option to purchase additional spare parts. Motor: 55 kW - 60 Hz. Belt drive. Permissible nominal bowl speed: 4,800 rpm. Minimum throughput: 8 m³/h; maximum throughput: 22 m³/h. Permitted feed product density: 1.16 kg/dm³. Permitted heavy liquid density: 1.1 kg/dm³. Permitted solids density: 1.3 kg/dm³. Maintenance tool set with ring spanner and compression tool included. Iiedpfexy R A Tjx Abpjf

Condition: used, Year of construction: 2012, GEA Milk Separator MSE 100-06-177 Year of manufacture: 2012 Maximum permissible drum speed: 7200 rpm Maximum permissible feed density: 1.0 kg/dm³ Heavy liquid: 1.0 kg/dm³ Solids: 1.1 kg/dm³ Min./max. feed temperature: 5/100 °C Iodpewayr Tjfx Abpjif Max. throughput: 30 m³/h

Condition: excellent (used), Year of construction: 2011, We offer a used GEA-CFS TwinGrill TWG 1800/600 — an industrial machine designed for continuous grilling, toasting, and thermal processing of a wide range of food products. The machine is ideal for meat, poultry, and fish processing plants, as well as facilities producing convenience foods, ready-to-eat meals, and semi-finished products that require consistent and controlled heat treatment. The GEA-CFS TwinGrill TWG 1800/600 model is designed as a continuous grilling line made of stainless steel. The unit utilizes a dual grilling system with independently adjustable upper and lower heating zones. The temperature of the upper and lower grills can be adjusted separately, allowing for precise adaptation of the process to the type of product, its thickness, texture, and the desired final result. The machine allows products to be grilled on both sides, ensuring uniform cooking results, an attractive surface appearance, and consistent quality across successive production batches. A temperature range of 50 to 260°C and an adjustable belt speed ranging from 0.3 to 3 m/min allow the grilling time to be tailored to various food products. The TwinGrill is equipped with an intuitive control panel and a user-friendly interface that simplifies operation, process monitoring, and the setting of operating parameters. The ability to create and adjust processing programs allows for better control over the cooking and grilling process, as well as increased production consistency. Thanks to its hygienic design, high-quality stainless steel construction, and belt-cleaning system, the unit is easy to clean and suitable for use in the food industry. Additional features, such as removable grill plates and grease collection systems, facilitate routine maintenance and keep the unit clean. The GEA-CFS TwinGrill TWG 1800/600 is a versatile solution for grilling meat, poultry, fish, vegetables, formed products, burgers, cutlets, and ready-to-eat convenience foods. The machine can operate as a standalone unit or as part of a larger production line, e.g., following forming, marinating, breading, or preliminary processing of the product. Technical specifications: Manufacturer: GEA CFS Bakel B.V. Model: TWG 1800/600 Type: TwinGrill / industrial double-sided grill Machine number: 662 Year of manufacture: 2011 Net working length: 1800 mm Conveyor belt width: 600 mm Power supply: 400 V Phases: 3 Ph Frequency: 50 Hz Installed power: 97 kW Heating power: 93 kW Temperature range: 50–260°C Belt speed / grilling time: 0.3–3 m/min Belt cleaning system: included Construction: stainless steel Weight: approx. 2250 kg Applications: grilling burgers grilling cutlets and formed products Iiodpfx Abezicutspsf processing poultry fillets production of grilled meat products processing fish products grilling vegetables production of ready-to-eat meals production of convenience foods Lines for grilled, roasted, and cooked products Meat, poultry, and fish processing plants Large-scale food service and catering production

Condition: ready for operation (used), Model: KAPRE 2500 Machine no: 463 Edge press for solid wood stripes Heat in the plate Max width of workpiece: 50 mm Length: 2500 mm Iiedoma Ayrjpfx Abpef Stock no: 2001658

Condition: good (used), functionality: fully functional, Used machine in very good condition, was in operation last year. Iedpfevr E Edsx Abpjif

Condition: excellent (used), Year of construction: 2010, Sterile tank with agitator, temperature-controlled, upright Technical data / dimensions Available quantity: 1 Volume: approx. 6,000 liters Container type: Sterile tank Condition: used Suitable for food: yes Design: upright Diameter inside: approx. 1,700 mm External diameter: approx. 1,854 mm Cylindrical height: approx. 2,264 mm Total height: approx. 5,390 mm Weight: approx. 2,030 kg Specific weight of the medium: 1.0 to/m³ Operating pressure: negative pressure/vacuum Operating pressure: 3.5 bar Test pressure: 5.4 bar Wall thickness bottom: approx. 5.2 mm Wall thickness top: approx. 8.4 mm Wall thickness jacket / cylinder: approx. 5.2 mm Iiodpotyz Izjfx Abpef Ground clearance: approx. 800 mm Operating temperature: 150 degrees Celsius Type plate available Manufacturer: GEA serial no.: 2376 Year of construction: 2010 Material / condition Material inner jacket: V2A (1.4541) Material double jacket: V2A (1.4541) Feet material: V2A (1.4541) Outer surface: bright rolled 2B Internal surface: Ground Ra

Year of construction: 2001, condition: excellent (used), Westfalia Decanter Manufacturer: GEA Westfalia Separator AG Type: CA 365-010 Year of manufacture: 1978 Drum speed: 3,300 rpm Last operational until: 2004 Application area: Used in the production of base oils for the removal of solid particles. Iedsd Rwwxspfx Abpeif The decanter was decommissioned after a production change in 2004 and is therefore fully functional.

Condition: like new (used), Year of construction: 2012, The refrigeration unit is in new condition with storage marks. Weight: 400 kg Height: 205 cm Width: 130 cm Iedsmmdq Topfx Abpoif Depth: 65 cm

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, inner diameter: 365 mm, wall thickness: 10 mm, rotational speed (max.): 2,900 rpm, The GEA Westfalia Separator CA 365-03-00 is a high-performance, three-phase decanter designed for the efficient separation of liquids and solids. With a drum diameter of 354 mm and an extended drum length, this model offers optimized separation performance. DRUM AND HOUSING DESIGN The decanter drum is configured in a flat-cone design, enabling effective phase separation. The housing is manufactured in a standard design, facilitating integration into existing systems. LIQUID DISCHARGE Liquids are discharged with the light phase unpressurized and the heavy phase under pressure. This functionality ensures reliable and continuous removal of the separated phases. DRIVE TYPES The drum is driven via a belt drive, while the screw is driven by a gearbox. These drive types provide stable and efficient decanter operation. The GEA Westfalia Separator CA 365-03-00 provides a reliable solution for the separation of liquids and solids in various applications. Isdpsy H Ixujfx Abpeif plus GEA WESTFALIA SAMR 5036 CENTRIFUGE CLARIFIER FOR A COMPLETE LINE FOR OILS. The units can be sold separately or as a complete line. ?v=nv23KAJFewE

Condition: used, Year of construction: 1980, used, good conditionmake GEA-Casadeitype DE 410year 1980machineNr. 80-12-72planing width approx. 410 mmtable length infeed approx. 1200 mmtable length outfeed approx. 1000 mmjointing bartable lips slotted/low noisenumber of knives 4 piecessuction connection D 120 mmspace requirement approx. 2300 mm x 800 mm x 1000 mmstorage place 97447 Gerolzhofen, free loaded, unpackeddelivery in as-is condition as inspected,without warranty and guarantee Isdpjvwfxzefx Abpoif

Condition: used, Year of construction: 1988, from training workshop, public authority pivotable for long workpieces used, in good condition Iedpowbi Exefx Abpoif machine cleaned, overhauled greased, function tested, trial run manufacturer Gea type Kapre 3000 year of manufacture 1988 one-sided from below press cylinder 1 heating rail working length 3000 mm pneumatically operated mobile New parts: mist lubricator compressed air lines 2 pot seals for press cylinder 2 pot seals for clamping cylinder plug for heating rail Storage location 97447 Gerolzhofen, loaded free on truck, unpacked Handover in current condition as inspected, without warranty or liability

Condition: reconditioned (used), Year of construction: 1998, KEG system, manufacturer: GEA Till, type: KEG-BOY C2, for approx. 25 KEGs/hour, for KEGs with flat fitting, with 1 internal cleaning station and 1 filling station, with 1 cleaning agent tank, with control cabinet. The system is overhauled and equipped with a new control unit. Iodpfxjw Hxuys Abpsif

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Equipment: type plate available, Two professionally disassembled compressors from the manufacturer GEA Bock. Technical data sheet available, see images. Iisdpfxewuvquo Abpof

Condition: excellent (used), Year of construction: 2013, GEA Modular Membrane Filtration System up to 6.25 m³/h, in excellent condition and barely used. This equipment was used for just two validation batches, and after that has been in storage. It is currently equipped with spiral-wound nanofiltration membranes but other membrane types can be used for microfiltration (MF), ultrafiltration (UF), etc. The complete original manufacturer documentation is included in digital format, comprising the operating manual, process flow charts, wiring diagrams, certificates, inspection reports, and other relevant technical documentation. The system is designed to process a maximum volume of approximately 100 m³ of product (feed) per day. An average feed flow rate of approximately 4 to 6 m³/h is assumed under the “16/4” or “20/4” operating regime (Explanation: “20/4” corresponds to 20 hours of filtration operation / 4 hours of CIP cleaning). Ijdevhctwspfx Abpjif If, at a later stage, the daily processing capacity needs to be increased or the installed membrane surface becomes insufficient due to unforeseeable fouling effects, two empty slots are provided for retrofitting additional membrane housings. The piping and recirculation pump are already prepared for such an expansion. The membrane unit is designed for a semi-automatic cleaning-in-place (CIP) procedure. The system includes the required valves for internal circulation of cleaning solutions, followed by system flushing. Specifications - Feed volume: 400 - 500 m³/week - Feed volume: 80 - 100 m³/day - Feed volume: 4.0 - 6.25 m³/h - Production time: 16 - 20 h/day - Operating temperature: 35 to max. 65 °C Consumption - Power supply (pumps): 3 x 400 V, 50 Hz - Installed power: approx. 65 kW - Electric power consumption: 53.1 kW/h - Compressed air: 6 bar, oil- and water-free - Steam: 6 bar (max.) - Seal water: approx. 75 - 150 l/h - CIP water: approx. 19 m³/h - CIP water per cycle: 6 m³/CIP - Steam consumption per cycle: 100 kg/CIP - CIP chemicals: (e.g., membrane cleaner, acid, alkali, preservative, biocide) Limits - Max. operating temperature: 65 °C - Max. operating pressure: 30 bar - pH range for feed water: - Maximum: pH 10.0 - Minimum: pH 2.0 Cleaning-in-Place (CIP) - Max. temperature: 85 °C - Max. pressure: 10 bar - pH limits (for up to 30 minutes): - Maximum: pH 10.5 - Minimum: pH 2.0