Used Gear Chamfering Machine for sale (69,509)

Condition: good (used), Year 2003 Processing machine for machining splines and sprockets on crankshafts or shaft-like components Liebherr PC-NC control system for disk cutting wheels in the range 180-300mm for hobbing Vertical machining with straight shaping head and synchronization Pjdpfxjt Utdpj Ag Iopl Clamping in chuck in the machine bed and tailstock as counterholder Integrated ring loader between machining and loading position Automatic loading hatch from above with loader interface The machine is currently still in series production and can be inspected under power Front screen of the monitor defective, display undamaged after visual inspection Fuse for controls and drives included - free location Availability after consultation, warranty excluded Year of Production:2003 Shaping machine for producing splines and sprockets onto crankshafts and Control Liebherr PC-NC For shaping tooling in range of 180-300mm for Hobbing Vertical machining with straight cutting head and Synchronization Clamping in Jaw on the machine bed and tailstock as counterpart integrated Ring-load between Machining and loading position automatic Gantry door for overhead loading and corresponding interface Machines are actually in serial production and can be inspected upon request front glass of Monitor damaged, screen itslef seems unharmed on first glance safeguarding of control and drives included - free location availability on agreement, no warranty possible

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, spindle speed (max.): 3,000 rpm, travel distance X-axis: 90 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 400 mm, spindle bore: 40 mm, TECHNICAL DETAILS Travel Distance X-Axis: 90 mm Travel Distance Y-Axis: 80 mm Travel Distance Z-Axis: 400 mm Maximum Permissible Head Circle Diameter: 140 mm Milling Arbor Diameter: 22 mm Psdsxvrarjpfx Ag Ispl Maximum Gear Cutting Length: 160 mm Angles Maximum Swivel Angle of Milling Head +A Direction: 45° Maximum Swivel Angle of Milling Head -A Direction: 118° Workpiece Spindle Outer Diameter: 105 mm Bore: 40 mm Rapid Traverse X-Axis: 7,500 mm/min Y-Axis: 5,000 mm/min Z-Axis: 15,000 mm/min Rotational Speeds Tool: 50 to 4,000 rpm Workpiece Spindle max.: 3,000 rpm MACHINE DETAILS Operating Hours: 29,790 h Cycle Time: 6,654 h Electrical Connection Mains Connection: 400 V (AC) Supply Voltage: 400 V (AC) Control Voltage: 24 V (DC) Frequency: 50 Hz Connected Load: 13 kVA Cable Cross-Section: 16 mm² Fuse Rating: 63 A Dimensions & Weight Space Requirement: 5.25 x 4.06 x 2.94 m Machine Weight: 8 t EQUIPMENT Industrial Filter IFS EC1500 Sediment Separator Knoll KF200/640 Integrated Chip Conveyor with Magnetic Separator Machine Automation for Loading and Unloading Workpieces Robot Automation Güdel KTB-31/62, Year Built: 2018 with Station for Part Remover

Condition: good (used), Year of construction: 1975, max. wheel diameter 630 mm gear width 425 mm table hole 125 mm clamping table 550 mm max. module 10 axial-feeds 0,40 - 6,80 mm/U radial feeds 0,10 - 1,76 mm/U dist. cutter spindle - workpiece spindle 50 - 425 mm no. of teeth min. 8 milling cutter dia. x width 192 / 215 mm shifting 200 mm main drive motor 7,5 kW total power requirement 22,5 kVa weight of the machine ca. 8,2 t Machine equipment: - Universal milling head with tangential displacement - Pressure reducing valve for counterholder - Magnetic chip transport --> Working range Largest module to be milled (in steel 600 N/mm²): 10 mm --> Straight gear teeth: --> Largest workpiece diameter: 630 mm --> Largest axial slide travel (Z-axis): 425 mm --> Smallest number of teeth to be milled: 8 --> Dimensions Diameter of workpiece table: 550 mm --> Diameter of table bore: 125 mm Ppjdpfx Aow A Am Seg Ijl --> Diameter of workpiece mandrel: 36 mm --> Largest milling cutter that can be clamped: --> Diameter: 192 mm --> Width: 220 mm --> Diameter of milling cutter mandrels: 32 mm --> Centre distance between milling cutter and workpiece: --> Maximum distance: 425 mm --> Minimum distance: 50 mm --> Drive taper for cutter mandrels: Morse taper 5 --> Maximum cutter displacement: 200 mm --> Speeds and feeds Cutter speeds: 45 - 280 rpm --> Axial feed (Z axis): 0.40 - 6.30 mm/rev --> Radial feed (X axis): 0.10 - 1.60 mm/rev --> Tangential feed (Y axis): 0.14 - 2.24 mm/rev Translated with (free version)

Condition: used, Column Drilling Machine INFRATIREA - ORADEA Type PH - 031 Serial No. Year of manufacture 1975 Ppodpfjtrpifsx Ag Iel Drilling capacity 40 mm Spindle taper MK 4 - short quill Throat depth 320 mm Quill stroke 250 mm Table size 400 x 400 mm Column diameter 160 mm Spindle speed 85 - 1500 rpm, 6-speed gearbox Motor power 2.2 kW Power supply 400 Volt, 50 Hz - Spindle speed adjustable over 6 gear steps - Right and left-hand rotation - Automatic feed 0.10 - 0.16 - 0.25 - 0.4 mm/rev - Swivel drill table - Table height adjustment via hand crank - Clamping surface on machine base - Coolant pump integrated in base Required space L x W x H 1000 x 600 x 2450 mm Weight 700 kg

Condition: used, max. wheel diameter 300 mm Ppodpfx Agsxu Ntts Isl gear width 200 mm max. module 12 min. module 0,5 total power requirement 2 kW weight of the machine ca. 1 t dimensions of the machine ca. 0,8 x 1,2 x 1,5 m

Condition: good (used), Year of construction: 2008, Gear grinding machines Reishauer RZ303 Psdpfx Asxz E S Esg Iepl

Condition: used, Year of construction: 2005, Reishauer RZ150 gear grinding machine Ppodpexz E Srsfx Ag Iel

Condition: good (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 43100, total height: 9,650 mm, Mechanical engineering from Innovative and reliable Machines for weld seam preparation and sheet metal processing Quicker high-speed beveling machine using the roller shear method for beveling technology. These QUICKER machines work according to the roller shear method. In this process, a long chip is from the sheet edge by means of a slowly rotating cutting wheel. This enables This achieves speeds of up to 3.1 m/min (up to 5 times faster than conventional methods). The efficiency is also increased by the low wear of the tool cone. This process is one of the most efficient ways of preparing weld seams. The cost savings of up to 75 % compared to conventional methods. Fast, compact, handy and with infinitely variable angle adjustment from 15° to 55°, this machine is one of the most popular chamfering machines. one of the most popular chamfering machines. The practical scissor lift truck can be adjusted over a wide range for adjustable over a wide range. This allows the machine to easily move past the fixed sheet metal panel. move past the fixed sheet. Of course, the Quicker II can also be operated with a crane. This machine is rotated by 180° for processing bottom chamfers. The holes on the on the upper side match those in the machine feet. Many customers have ordered two of these machines ordered two of this machine. One for the top bevel and one for the bottom bevel. Spare parts can be obtained quickly and tools, such as cutting wheels for steel and stainless steel, are available from stock. ROLLER SHEARING MACHINE GECAM QUICKER GECAM QUICKER - BEVELING MACHINE, STRONG AND HANDY, INFINITELY VARIABLE ANGLE ADJUSTMENT - Precise adjustment of the bevel angle and Ppodpfxjqvm Ure Ag Isl the bevel dimension - Stepless angle adjustment 15°-50 - Tools available for all materials - Clear view of the cutting process - For the upper bevel and convertible for the bottom bevel - Stable sheet metal guide for safe chamfering - Chamfering of sheets and tubes - 5 x faster than conventional processes - Highly economical - Low tool wear - Low maintenance - Optional: Lifting carriage for QUICKER with infinitely variable height adjustment (working height approx. 860 mm - 1,200 mm) Europe Technical data: Quicker Bevel capacity at 400 N/mm²: 10 x 10 corresponding to 14 mm bevel at 45° at 600 N/mm²: 8 x 8 corresponding to 11 mm bevel at 45° Max. Sheet thickness (mm) 6 - 30 (40) Bevel angle (°) 15 - 50, infinitely variable Cutting speed (m/min) approx. 3.1 Dimensions (mm) 530 x 650 x 400 Weight (kg) 78 Motor power 4 / 3 Advantages: V 2020/10

Condition: excellent (used), Year of construction: 1967, operating hours: 11,240 h, Very little use, Control: conventional, Lubricant: cutting oil, Accessories: Approx. 11 milling tools in double version GT3-5-8 as well as HTD-3-5-8 for various gear ranges Face drivers Captis M52 collet chuck Mini tilting container Oil drip tray All gears, holders, and manuals included Psdpfx Ajxnlvdjg Ispl

Condition: excellent (used), HSS saws chamfering machine Peruzzi model SAUT 550, fully reconditioned and newly painted, like new Ppsdpehzcctefx Ag Isl

Condition: good (used), Year of construction: 1982, max. wheel diameter 600 mm gear width 500 mm max. module 15 min. module 1 total power requirement 2 kW weight of the machine ca. 2 t dimensions of the machine ca. 2x1,5x2 m The rounding of the teeth is obtained by coordinating alternative movement of the cutter and rotary movement of the piece. The alternative movement of the Podpfx Agswftuxe Ijpl cutter is obtained by rotating a cam, shaped in order to obtain radius or cusp rounding. A series of 4 cams allows to work modululus from 1 and 16 included. An regulation device allows change the modulus between the minimum and maximum value of every cam. The rotation of the piece is controlled by a three-stage gear wheel which forms the dividing system. The piece lock and the movement of the rapid entry of the cutter to the piece is controlled by pneumatic servo devices. The practicality and rapidity of the equipment, as well as the wide range of profiles available on the cams and the ability to process internal gears, make the machine a universal machine suitable for machining small and large series. --> technical features Max module: 15 --> Max diameter: 600 mm --> Spindle/head speed: 1450 - 2100 - 2800 rpm --> Production output teeth per minute: 35 - 50 - 75 --> Motor output spindle: 2800 rpm - 1.5 HP --> Motor power piece rotation (self-braking): 1.5 HP --> Motor power automatic (self-braking): 0.35 HP --> Motor power cooling system: 0.25 HP --> Dimensions: 2000 x 1500 mm --> Total weight: 2000 kg Accessories Cam x 5 Indexing wheels Tools Serial no. 152/0589/94 Machine with full enclosure Counter support

Condition: good (used), Year of construction: 2005, functionality: unexamined, machine/vehicle number: 29406, Lot consists of: (1)CNC Gear Shaping Machine Position consists of: (1) CNC gear shaping machine Technical Details/Technical Details: English: max dia 130mm, max face width 25mm, min/max module 0.5-4, strokes 500 - 2,500 1/min, spindle dia 85mm, CNC Siemens Sinumerik 840D, 400V 50Hz 49kW, LxWxH 6.4x4.5x4.4m, weight 12to Parts Gantry System and/or Cranes are not included in the scope. German: max. diameter 130mm, max. face width 25mm, min./max. Module 0.5-4, strokes 500-2,500 rpm, spindle diameter 85 mm, CNC Siemens Sinumerik 840D, 400 V 50 Hz 49 kW, LxWxH 6.4 x 4.5 x 4.4 m, weight 12 tons Ppsdpjv R Tmtefx Ag Ijl Parts gantry system and/or cranes are not included in the scope of delivery.

Condition: used, The Modul KF 250 HSC bevel gear milling machine was designed as a universal machine for flexible machining of gears and is used by manufacturers of gear and transmission technologies for the milling process of bevel gears. Technical data: Gear diameter: 300 mm Max. module: 10 Tooth width: 60 mm Space required approx.: 4.2 x 2.6 x 2.2 m Machine weight approx.: 11,000 kg Ppjdpfxjxz Eg Ae Ag Ijl *The image shows the machine in its current condition as a used machine. Upon request, it can be offered partially modernised or as a complete retrofit, fully modernised with new CNC control (SIEMENS ONE).

Condition: used, The Samputensili S 500 B bevel gear cutting machine was designed as a universal machine for flexible machining of gears and is used by manufacturers in gear and transmission technology for the milling of bevel gears. Technical data: Gear diameter: 500 mm Module – max.: 5 Tooth width: 100 mm Space requirement approx.: 4.5 x 3.2 x 2.4 m Ppjdpfx Asxz Ef Sog Iel Machine weight approx.: 13,000 kg *The illustration shows the machine in its current used condition. Upon request, it can be supplied partially modernised, or as a completely retrofitted and modernised machine with new CNC control (SIEMENS ONE).

Condition: like new (used), functionality: fully functional, workpiece weight (max.): 3 kg, feed length X-axis: 100 mm, feed length Y-axis: 100 mm, feed length Z-axis: 200 mm, workpiece diameter (max.): 180 mm, milling length: 200 mm, overall weight: 5,000 kg, rotational speed (max.): 3,000 rpm, rotational speed (min.): 400 rpm, tool diameter: 80 mm, Equipment: documentation/manual, rotational speed infinitely variable, This machine is completely dismantled and rebuilt from the ground up. During the overhaul, it undergoes comprehensive modernization with state-of-the-art technology and the latest premium-quality components. Following refurbishment, the machine is presented in a technical and visual condition equivalent to new – reliable, high-performance, and future-proof. The equipment and configuration can be tailored individually to your requirements, ensuring maximum productivity in your production environment. Ppjdpfjx Af A Hox Ag Isl

Condition: good (used), Condition: Used Stock number: 968859 State: Good Maximum diameter: 100 mm (4") Maximum length: 100 mm (4") Number of teeth: 6-400 Maximum pitch in steel: 15 D.P. 12 indexing tables Geometrically calibrated between 200 and 2,400 rpm Feed: Horizontal cut or plunge cut Main motor: 1.5 HP Coolant pump motor: 0.1 HP Hydraulic system motor: 0.1 HP Podpfoxlabisx Ag Ispl Dimensions: 1120x1120x1680 mm Machine weight: 500 kg

Condition: good (used), ⚙️ Mikron Gear Hobbing Machine Type 132-02 (M23) – Now available at our facility in Ireland: Mikron Gear Hobbing Machine Type 132-02 (M23) in very good condition. This precision Swiss-made machine is ideal for the production of small gears, toolrooms, and manufacturers seeking reliable, high-precision gear cutting capabilities. Mikron is renowned for its robust construction and long-lasting performance in gear hobbing applications, making it an outstanding solution for hobbing spur gears, helical gears, and splines with consistent accuracy. Condition: Used Stock number: 968859 State: Good Maximum diameter: 100mm (4") Maximum length: 100mm (4") Number of teeth: 6–400 Maximum pitch in steel: 15 D.P. 12 table revolutions Geometrically calibrated between 200 and 2,400 rpm Feed: Horizontal or plunge cutting Main motor: 1.5 HP Podsxlabcepfx Ag Ispl Coolant pump motor: 0.1 HP Hydraulic system motor: 0.1 HP Dimensions: 1120 x 1120 x 1680 mm Machine weight: 500 kg

Condition: ready for operation (used), Used Liebherr S800 gear hobbing machine, technical data see photos. Pedpfxoxtu Dhj Ag Ijpl

Condition: used, Year of construction: 1988, machine/vehicle number: 14411, stroke length: 220 mm, table diameter: 730 mm, For sale is a Lorenz LS 630. A robust and precise machine, renowned for its high build quality. The machine requires technical refurbishment due to the control system, but is in very good mechanical condition. It can process components up to module 12. A stable and high-quality Lorenz LS 630 that can be made fully operational again with some effort. Pedpfxexrcmbs Ag Iepl

Condition: new, Lifer program horizontal gear hobbing machines Ppodou Egfispfx Ag Ijl

Condition: new, Delivery program Eifco hobbing machines Psdpfx Asu Egdlog Iepl

Condition: excellent (used), The DNDA type pointer–chamfering machine is designed for forming conical points or chamfering the ends of shafts, rods, and stakes. Feeding and rotation of the workpiece are performed manually. Ppodpfxex E Eh Ro Ag Isl Min. length of workpieces: 700 mm Disc rotational speed: 1060 rpm Number of cutting knives: 6 pcs Motor: 4 kW Extractor nozzle diameter: Ø 160 mm Required air flow for chip extraction: 850 m3/h Table height above floor: 730 mm Overall dimensions: Length: 960 mm, Width: 880 mm, Height: 1300 mm Weight: 280 kg

Condition: good (used), ø max. Gear 250 with 3" cutter module 5,5 hobbing length 70 Ppjdsgq Dgdepfx Ag Ijl cutter module 5,5 outside ø max. Acknowledged 300 mm ø spindle 85 mm ø hole table 39 mm ø table External centering Ø139,75 power tool motor (b) 4 Cv high 1.800 mm long 1.450 mm weight 2.450 Kg width 1.000 mm

Condition: ready for operation (used), Year of construction: 2004, operating hours: 26,583 h, functionality: fully functional, machine/vehicle number: A0248, workpiece diameter (max.): 130 mm, TECHNICAL DETAILS Workpiece diameter (max.): 130 mm Number of axes: X, Z, A, B, C (0–3) Ppjdpfx Agowmc Idj Ijl Electrical Power consumption: 47 kVA Voltage: 400 V Frequency: 50 Hz

Condition: good (used), Year of construction: 1990, machine/vehicle number: 328501, Offer 25366 Technical Data: - Drilling capacity: 25 mm - Spindle taper: MT 3 - Spindle speeds: 100 / 205 / 345 / 440 rpm and 695 / 885 / 1450 / 2900 rpm - Spindle stroke: 130 mm - Spindle overhang: 260 mm - Coordinate table with 3 T-slots: 580 x 240 mm - Table travel X-axis: 415 mm Psdpfjxu U Sujx Ag Ijpl - Table travel Y-axis: 155 mm - Drive: 400 V / 0.75 / 0.9 kW - Required space: approx. W 900 x H 1800 x D 700 mm - Weight: approx. 270 kg - Machine vice