Used Gear Griding Machine for sale (101,571)

Condition: used, Year of construction: 2000, functionality: fully functional, table diameter: 132 mm, wheel diameter: 130 mm, spindle speed (max.): 3,500 rpm, tool diameter: 80 mm, swivel angle A-axis (min.): -40 °, swivel angle A-axis (max.): 40 °, Gear Hobbing Machine - Vertical SAMPUTENSILI S130 CNC Module Well-maintained CNC vertical gear hobbing machine for shafts and gears with tailstock Also suitable for hard milling (good for steering pinions) TECHNICAL DETAILS Control type: CNC Control name: Sinumeric 840C Gear diameter: max. 130 mm Module: max. 3 Total power requirement: 15 kW Machine weight: approx. 6 t Space required: approx. 2.3 m x 2.5 m x 2.17 m Rapid traverse radial, axial: 10,000 mm/min Rapid traverse tangential: 7,500 mm/min Max. gear diameter: 130 mm Max. module: 3 mm Tangential slide travel: 200 mm Radial Sliding travel: 10/100 mm Axial slide travel: 300/200 mm Milling head speed: 250-3500 rpm Milling head: Tiltable up to ± 40° Tool diameter: 80 mm Tool length: max. 240 mm Table speeds: 5-1000 rpm Milling spindle drive: 15 kW Feed range: 0.1-2000 mm/min Table diameter: 132 mm MACHINE DETAILS Control: Sinumerik 840 C Connected load: 40 kVA Motor power: 15 kW Weight: 6 t Dimensions: 2300 x 2500 x 2170 mm Godjwmb Nyspfx Ag Nsuh EQUIPMENT - Hydraulic workpiece clamping - Automatic loading system - Magnetic Chip conveyor

Condition: excellent (used), Max. Wheel Dia: 1600 mm Min. wheel Dia: 800 mm Gusdsv Igc Njpfx Ag Nsh Gear width: 560 mm Max. module: 16 Min. Module: 4 Table dia: 1350 mm Table load cap: 7000 Kg Machine weight: ca. 18 Tonnes Machine with change gear, arbors, fixtures set Machine is in excellent condition

Condition: ready for operation (used), Year of construction: 1978, functionality: fully functional, machine/vehicle number: 0672/1, table diameter: 590 mm, wheel diameter: 650 mm, milling length: 250 mm, table bore: 140 mm, TECHNICAL DETAILS Gusdeva Hf Ujpfx Ag Njh Number of spindles: 1 Control: conventional Maximum wheel diameter: 650 mm Cutter length: 250 mm Height: max. 500 mm Module: max. 10 Worktable diameter: 590 mm Table bore: 140 mm Minimum distance between milling cutter and table center: 50 mm ACCESSORIES - Complete set of change gears - Suction device

Condition: used, functionality: fully functional, The bevel gear testing machine Gleason-Welter 2000 T was designed as a universal machine and is used by manufacturers of gears and transmission technologies for the single flank rolling test process of bevel and crown gears. Technical Data Diameter: 2000 mm Spindle bore: 310/250 mm Test speed: 5-100 rpm Dimensions: approx. 4,200 x 4,500 x 2,300 m Machine weight: approx.12,500 kg *Specifications and data are non-binding, subject to prior sale Special Features: Angle-hypoid test device, suitable for testing larger sizes of bevel and hypoid gears with a diameter of up to 2,000 mm and shaft angles from 0 to 360 degrees, as well as straight, helical, and internal gearing. Deviations in gear geometry, machining errors through defective tools, as well as damage to the gears, can thus be identified and eliminated before assembly. The following parameters can be measured here: - Single flank rolling deviation Fi', fi', fl', fk' Guedpfx Agown D Uhs Noh - Pitch deviations Fp, fp, fu - Runout and roundness - Runout error Fr - Backlash - FFT analysis For technical questions and further information, you can contact us at any time.

Condition: new, Lifer program horizontal gear hobbing machines Gujdeu Egfijpfx Ag Njh

Condition: like new (used), Year of construction: 2021, functionality: fully functional, inner diameter: 250 mm, outer diameter: 300 mm, For the production of internally and externally toothed cylindrical gears and other rolling profiles and shapes that regularly occur on the cylindrical workpiece circumference, as well as for the production of profiles using the single part process. incl. robot automation: coordinated Fanuc robot for loading and unloading TECHNICAL DETAILS CNC control: Siemens SINUMERIK 840 D sl External toothing: 300 mm Internal toothing: 250 mm Largest workpiece orbital diameter: 450 mm Nominal machine module: 8 mm Largest toothing width: 100 mm Shaping spindle stroke rate range Special version: 85 - 850 rpm Spindle diameter: 95 mm Mounting: HSK-B80 taper Distances and adjustment ranges Smallest pitch height of the hydrostatic inclined guide: 400 mm Smallest/largest distance between tool and workpiece axis: -70 / +230 mm Stroke position adjustment range (manual): 75 mm Stand lateral offset range: ±25 mm MACHINE DETAILS Weight of the machine: approx. 7,000 kg Guodsvdtx Njpfx Ag Nsh CONTROL AND DRIVE CNC control: Siemens SINUMERIK 840 D sl Control group: NCU 720.3PN with PLC 317-3PN/DP Drive system: SINAMICS S120 (digital drive technology) Measuring systems: - Absolute encoders for linear and rotary axes (except endless rotary axes) - Incremental measuring systems for C-axis NC axes: - Spindle stroke drive (A) - Workpiece rotation (C) - Tool rotation (C2) - Radial axis (X) shank and tool table Max. Shaping spindle speed: 12 rpm Max. Table speed: 300 rpm Max. Table torque: 220 Nm Table bore: diameter 150 mm, depth 253 mm Free support diameter: 365 mm (4 T-slots, M12 threaded holes) Radial drive: Max. Feed speed: 3,000 mm/min COOLING AND LUBRICATION SYSTEM Coolant tank capacity: approx. 550 l Cutting wheel cooling lubricant delivery rate: approx. 150 l/min Magnetic chip conveyor: - Nominal width: 230 mm - Discharge height: approx. 900 mm Lubrication and hydraulic system Tank volume: approx. 160 l Number of pumps: 2 (lubrication, hydraulic and hydrostatic) POWER SUPPLY Operating voltage: 400 V Control voltage: 24 V DC Frequency: 50 Hz Total connected load: approx. 25 kVA PROGRAMMING Standard dialog program: plain text operator guidance (German, English, Italian) Program functions: Single-cut cycle Multi-cut cycle (max. 3 cuts) Dimensional corrections Linear or degressive infeed EQUIPMENT 1 basic machine(s) AM 250 1 power clamping device 1 main column intermediate plate (150 mm high) 1 special ram head 0 - 110 mm stroke length 1 HSK-B80 tool holding cone 1 counter column with fixed counter support arm 1 counter column intermediate plate (100 mm high) 1 set of vibration isolators at no extra charge 1 Electronic handwheel 1 Extended software for fault diagnosis at no extra charge 1 Internet diagnostics system 1 Flow monitor 1 Flushing gun 1 150 mm diameter pipe socket 1 counterholder tip - rotating 1 draw tube and attachment bush AUTOMATION: 1 standard interface 1 Internal flushing of clamping top parts 1 Automatic loading door

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 28958, feed length X-axis: 100 mm, feed length Y-axis: 160 mm, feed length Z-axis: 300 mm, spindle bore: 45 mm, Placeholder text TECHNICAL DETAILS Description Technical details: Maximum gear diameter: mm Gear width: mm Cooling pumps from HPV Machine weight approx.: 7000 kg Space required approx.: 9130 x 3895 x 3450 mm Largest permissible tip diameter: 80 mm Maximum gear length: 170 mm Overall length: 240 mm Mounting diameter: 32 mm Radial slide travel (X-axis): 100 mm Tangential slide travel (Y-axis): 160 mm Axial movement of the Z-axis: 300 mm/min Workpiece spindle bore: 45 mm Connected load: 44 kVA Request more information Godpfx Agewmbylj Nsuh DOCUMENTS (PDF)

Condition: used, Year of construction: 2007, max. dia. of teeth cutting 2000 mm workpiece dia. 2700 mm Diameter of the table 1500 mm max. module 22 Control 840D turning speeds 3,5 U/min table load capacity 20000 KG Distance of shafts 70...1220 mm Stroke length 30...330 mm no. of strokes 10...200 Hub/min total power requirement 138 kW weight of the machine ca. 38 t dimensions of the machine ca. 11x5 m machine: Full CNC machine with electronic rolling coupling for C- and D-axes and digital INDRAMAT drive technology. Godpsv E R Eijfx Ag Njuh Stiff machine bed in welded construction. Radial axis (X-axis) with hardened guideways, sliding guide with wraparound, longitudinal guide with roller recirculating shoes. Ground preloaded ball screw with play-free preloaded nut. Digital AC drive technology with play-free gearbox. Linear measurement system for radial positioning. Freestanding machine table with electrohydraulically play-free preloaded double worm gear, part wheel diameter 1365 mm, hydrostatic axial and radial bearings, automatic compensation of the workpiece weight. Table hole with a diameter of 500 mm through and open at the bottom. Water-cooled digital AC servo motors. The machine is to be installed on a foundation. Machine stand: as a highly rigid cast construction for axial travel of 1200 mm. Axial axis (Z-axis) with hardened guideways, slide-guided, longitudinal guide and wraparound with roller recirculating shoes. Ground ball screw with play-free preloaded nut. Digital AC drive technology. Encoder for axial positioning. Shapping head: SK 4.1 with hydraulic NC servo drive for impact spindle movement and cutting wheel lifting, stroke length 330 mm, impact spindle diameter 160 mm. Hydrostatically supported impact spindle, linear guide and lateral guide for the lifting mechanism. Maximum tool diameter 300 mm. Drive motor power 30 kW. Stroke rates from 10 - 200 DH/min, stroke speed from 5 - 45 m/min. Impact spindle speed for working and return stroke independently programmable. In the cutting area, the spindle speed remains constant. Maximum cutting wheel speed 10 rpm, digital AC drive technology. Cutting wheel lifting correction for internal and external gearing manually reversible. Lateral offset of the impact spindle axis up to 50 mm from the machine center to prevent return stroke collision of the cutting wheel, manually adjustable.

Year of construction: 1981, condition: good (used), Manufacturer: National Broach Type: GHC 12" Year of manufacture: 1981 Godpfx Ashad Avjg Nouh workpieceØ max.: 355mm pitch circleØ min/max: 100-152mm tooth width max.: 63,5mm Modu min/max.: 1,25-6,35mm weight: 3,4t Operation: honing internal teeth

Condition: excellent (used), Diameter: 2000mm Module: 30 Gujdjxf Uhkspfx Ag Noh

Condition: new, Delivery program Eifco hobbing machines Gsdpfx Agju Egdlj Nouh

Condition: good (used), Year of construction: 2014, Rausch Deburring Machine 500, Year of manufacture 2014, Control system Siemens Simatic HMI Coarse deburring Fine deburring Gusdpfewpp Uiox Ag Njh Module (m) from 2-8 Chamfer geometry 0.1 x m mm Gearing straight, helical, or spiral Workpiece diameter max. 500 mm Workpiece weight max. 50 kg Milling spindle 18,000 up to max. 50,000 rpm Collet 6 mm Kuka robot incl. PLC S7 and HMI Mobile Panel KTP 900 Deburring of sample parts possible.

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 0315, workpiece weight (max.): 15 kg, wheel diameter: 80 mm, milling length: 220 mm, workpiece length (max.): 450 mm, TECHNICAL DETAILS Max. workpiece diameter: 80 mm Workpiece weight: 15 kg Workpiece length: -50 mm - 450 mm Machining Max. nominal module for steel: 3 mm Max. milling stroke: 250 mm Max. shift travel: 180 mm Table diameter: 145 mm Table speed: 150 rpm Milling head swivel angle: ±45 degrees Cutter-workpiece center distance: 10 mm - 200 mm Milling unit Cutter diameter: 90 mm Cutter length: max. 220 mm Cutter speeds: 1,000 rpm Milling spindle drive power: 15 / 23 kW Godpfxjwmbnpj Ag Nouh Table drive power: 5.8 / 19.0 kW MACHINE DETAILS Weight of the machine with counterweight: 10,000 kg Total connected load: 25–35 kVA

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, feed length X-axis: 230 mm, feed length Y-axis: 25 mm, feed length Z-axis: 150 mm, workpiece diameter (max.): 300 mm, TECHNICAL DETAILS Control: Siemens 840 D Nominal module in steel with approx. 600 N/mm² tensile strength: 4 Largest tooth width: 25 mm Largest nominal diameter: 130 mm Largest helix angle when using 125 mm diameter cutting wheels: ± 45° Workpiece with internal gearing Nominal module in steel with approx. 600 N/mm² tensile strength: 4 mm Largest tooth width: 25 mm Largest swing diameter: 300 mm Largest inner diameter: 130 mm Tool Largest permissible cutting wheel diameter: 175 mm Cutting wheel holder – diameter: 1.5 inches Cutting wheel holder – taper in the shaping spindle: PKP 45 hollow steep taper – Bauer Travel paths Radial (X-axis): 230 mm Manual transverse column adjustment (Y-axis): ± 25 mm Adjustment range of the axial slide (Z-axis): 150 mm Workpiece table Outer diameter: 168.14 mm Bore: 65.532 mm Spindle spindle Largest stroke length (V-axis): 30 mm Spindle axis adjustment range: ± 0.25° MACHINE DETAILS Length: 6,435 mm Width: 4,560 mm Height: 4,400 mm Weight: approx. 11,000 kg Guedowc Tg Njpfx Ag Njh

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, feed length X-axis: 140 mm, feed length Y-axis: 100 mm, feed length Z-axis: 300 mm, spindle speed (max.): 1,500 rpm, controller model: IBH CNC, TECHNICAL DETAILS Axial slide travel Z-axis: 300 mm Radial slide travel X-axis: 140 mm Cutter travel Y-axis: 100 mm Tailstock travel W-axis: 420 mm Workpiece data Workpiece diameter with manual loading: max. 200 mm Workpiece diameter with automatic loading: max. 150 mm Max. workpiece length: 400 mm Milling parameters Cutter diameter: 40 - 102 mm Maximum cutter length: 230 mm Milling arbor diameter (standard): 16 - 32 mm Milling coordinates Z-axis: 100 - 400 mm X-axis: 100 - 150 mm Y-axis (milling spindle end face): 50 - 230 mm W-axis (tailstock end face): 165 - 585 mm Gusdpswcrnxofx Ag Noh Speeds Cutter speed B-axis: 0 – 1,500 rpm Workpiece speed C-axis: 0 – 350 rpm Feed rates X-axis: 3,500 mm/min Z-axis: 3,500 mm/min Y-axis: 4,000 mm/min W-axis: 5,500 mm/min V-axis (gantry loader): 80,000 mm/min Swivel range Shift milling head A-axis left/right: 50° / 60° MACHINE DETAILS Weight: 6 t EQUIPMENT - CNC control IBH - Loading device - Various accessories

Condition: not inspected (used), Year of construction: 2001, table diameter: 145 mm Max. workpiece outside diameter: 120 mm max. normal module: 3 mm Gedpfxohufb So Ag Nsuh Shaper head: Rapid, max. normal modulus 3mm weight: 8000 kg Price ex site for self dismantling. Optionally we can offer dismantling and loading. Description: -Documentation -stroke position adjustment -stroke length adjustment Available immediately

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: G0504, workpiece diameter (max.): 63 mm, travel distance Z-axis: 105 mm, outer diameter: 275 mm, distance between centers: 350 mm, swivel angle A-axis (min.): -30 °, swivel angle A-axis (max.): 30 °, TECHNICAL DETAILS Workpiece diameter: 63.5 mm Center distance: 350 mm Clamping surface length: 1,550 mm Number of T-slots: 2 T-slot width: 18 mm T-slot spacing: 180 mm Center height (tailstocks): 350 mm Pivoting range of the fine-tuning head (U-axis): +30 / -30 ° Tailstock/fine-tuning head center distance: min. 120 mm / max. 225 mm Input resolution (all NC axes): 0.001 mm / degree Control: SIEMENS 840D Feed slide Movement range (Z-axis travel): 105 mm Input resolution: 0.001 mm Tool Outer diameter: 225 - 275 mm Bore diameter: 160 mm Width: 60 mm Workpiece details Outer diameter: 40 - 150 mm Module: 1.25 - 4.0 mm Max. tooth width: 45 mm Speeds and feed rates Tool speed: max. 2,000 rpm Feed rate in Z direction: up to 2 m/min Feed rate in X direction: up to 2 m/min Feed rate in U direction: up to 2 m/min Feed rate in V direction: up to 2 m/min C3 direction: max. 12 °/s Servo drives Tool drive C1: 27.0 Nm at 3,000 rpm Workpiece drive C2: 27.0 Nm at 3,000 rpm X-axis: 20.0 Nm at 3,000 rpm Z-axis: 20.0 Nm at 3,000 rpm U-axis: 6.0 Nm at 3,000 rpm Vertical gantry (V1 axis): 6.0 Nm at 3,000 rpm Gripper rotation axis C3: 5.0 Nm at 3,000 rpm Loading slide (X1 axis): 5.0 Nm at 3,000 rpm Three-phase motors Hydraulic motor: 1.5 kW at 1,410 rpm Central lubrication: 0.07 kW at 2,700 rpm Gujdpfx Agowmbmlo Nsh Coolant pump: 4 kW at 2,840 rpm Hydraulic equipment Flow rate: 21 l/min System pressure: 50 bar Headstock clamping pressure: max. 35 bar Tailstock clamping pressure: min. 20 bar / max. 35 bar MACHINE DETAILS Weight: 5,500 kg Space required: 2,700 x 2,300 x 2,600 mm Operating fluids Hydraulic fluid: HLP D 46 Hydraulic capacity: 100 l Electrical system Operating voltage: 400 V Control voltage: 24 V DC Lighting voltage: 230 V AC Frequency: 50 Hz Power requirement: approx. 27 kVA EQUIPMENT - Central lubrication system - Coolant pump - Capacitive distance system - Automatic workpiece clamping - Precision wheel head with U-axis - Machine with full hydraulic equipment - Dialog-guided operator terminal

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 27498, feed length X-axis: 230 mm, feed length Y-axis: 170 mm, feed length Z-axis: 400 mm, gear diameter: 130 mm, spindle speed (max.): 1,200 rpm, TECHNICAL DETAILS Gear diameter: max. 130 mm Gear width: 400 mm Module: 0.5 - 3 Clamping length: max. 1,160 mm Work spindle swivel angle: ± 45° Tool change swivel angle: 90° Workpiece Largest module (in steel with approximately 600 N/mm²): 4 Largest swing diameter (not millable): 480 Smallest number of millable teeth: 3 Tool Largest hob diameter: 130 mm Largest cutter length (depending on cutter arbor diameter): 220 mm Cutter arbor diameter: 16 / 22 / 27 / 32 mm Cutter arbor taper: ISO Workpiece spindle – WS Gusdpfewc Tdusx Ag Neh External turning range: 160 mm Bore: 63 mm Tailstock – RT Motorized travel (W-axis): 750 mm Quill stroke (hydraulic): 90 mm Axis travels X-travel: 230 mm Y-travel: 170 mm Z-travel: 400 mm Spindle Cutter speed (infinitely variable): 300 – 1,200 rpm Workpiece spindle speed range: 1 – 125 rpm Control system Control system: Bosch CC 220 MACHINE DETAILS Total power requirement: 52 kW Machine weight: approx. 7.5 t Machine dimensions: approx. 4,800 × 3,800 × 2,500 mm Space required: 7.3 x 5.3 x 4.3 m Operating voltage: 380 V Control voltage: 220 V V Frequency: 50 Hz Machine power consumption: approx. 56 kVA EQUIPMENT - Bosch CC 220 CNC control - Continuously variable cutter speed control - Large travel range in all axes - High flexibility thanks to a wide range of modules

Condition: used, Year of construction: 2002, functionality: fully functional, wheel diameter: 130 mm, workpiece height (max.): 170 mm, TECHNICAL DETAILS Control: Sinumerik 840D Tip diameter: 80 mm Toothed length: 170 mm Overall length of hob cutter: 245 mm Collet diameter: 32 mm Tool speed: 300 - 3000 rpm Gear diameter: max. 130 mm Gear width: 170 mm Module: 0.5 - 3 Slide travel radial / tangential / axial: 200 / 170 / 250 mm Milling head swivel angle: ± 45° Workpiece table: Ø 168.14 mm Bore: 65.532 mm Table speed: 0 - 1000 rpm Table bore: 65.532 mm Feed X/Z: 1 - 6000 mm/min Rapid traverse X, Z / Y: 6 / 5 m/min MACHINE DETAILS Total power requirement: 48 kVA Operating voltage: 3 x 400 V, 50 Hz Machine weight: approx. 9 t Space requirement: approx. 7.64 x 3.14 x 3.25 m Gedpfsv I Tmusx Ag Nsuh

Condition: excellent (used), max. wheel diameter 180 mm gear width 60 mm max. module 4 min. module 0,5 no. of strokes 236 - 630 Hub/min table diameter 160 mm table bore diameter 75 mm total power requirement 6 kW weight of the machine ca. 2,5 t dimensions of the machine ca. 2,1 x 1,5 x 2,3 m Hydrostatic, tailstock, Top condition! Godpfx Asuwwmzeg Njuh

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 291127, wheel diameter: 275 mm, wheel width: 55 mm, controller manufacturer: Siemens, controller model: 840 C, Face Milling - Single Part Process - Continuous Process: - The workpiece and tool (usually Spiron) rotate simultaneously, and all teeth are machined simultaneously in a single operation. - The cutter head has multiple cutter groups (not arranged in a circle) - Parallel tooth height Gjdpfx Aov I Ud Ieg Njuh - Conical tooth tip surface Single Part Process: - The workpiece is stationary, and the tool (usually Arcon) rotates and cuts a tooth by plunging the tool. - Once a tooth is cut, the tool moves back out of the tooth, the workpiece continues to cut by one tooth width, and the next tooth is cut until all teeth are finished. - The cutter head has all cutters arranged on a circular path. - Conical tooth height - Parallel tooth tip surface The C28 can handle both gear and pinion. For the single part process, a C28 must be "prepared" - i.e., a direct measuring system + part gear brake, workpiece axis + license file for manufacturing single part processes. TECHNICAL DETAILS Control: Siemens 840 C Wheel diameter: max. 275 mm Wheel width: 55 mm Module: 1.5 - 6.5 Helix angle: 0-60° Number of teeth: 6-120 mm Gear ratio: 1:10 - 1:1 Cutter head radius: 62 - 110 mm Number of knife groups: 5-19 (Oerlikon) Travel X / Y / Z: 500 / 885 / ±185 mm Motor speed per axis: 2400 rpm Ratio X / Y / Z: 3:1 Spindle pitch per axis: 10 mm Movement range E / V-axis: -5° to 95° / ±7.5° Motor speed E / V-axis: 400 / 900 rpm Travel E/V-axis: 1800 / 1098 °/min E/V-axis gear ratio: 80:1 / 1:1 A/B-axis mounting diameter: 130 / 140 mm A/B-axis spindle speed: 667 / 345 rpm Permissible A/B-axis motor speed: 10,000 / 4,500 rpm A/B-axis gear ratio: 15:1 / 13:1 V1-axis travel: 85 - 225 mm V1-axis travel speed: 6 m/min V1-axis motor speed: 1800 rpm V1-axis spindle pitch: 5 mm U-axis travel: 112 - 258 mm U-axis travel speed: 0.6 m/min U-axis gear ratio: 4.3:1 U-axis motor speed: 3000 rpm U-axis spindle pitch: 5 mm MACHINE DETAILS Weight: 13 t Space requirement: 5.2 x 2.3 x 2.4 mm Power requirements: 3 x 400V, 50 Hz, 90 A Transport weight: 16.5 t

Condition: good (used), max. wheel diameter 130 mm gear width 140 mm max. module 2,5 min. module 0,3 turning speeds 112 - 1000 U/min min. number of teeth 6 clamping length max. 150 mm total power requirement 3,5 kW weight of the machine ca. 2,1 t Gusdpfx Asvpab Ijg Nsh dimensions of the machine ca. 1,3 x 1,2 x 1,5 m

Condition: excellent (used), max. wheel diameter 300 / 400 mm gear width 76 mm max. module 6 min. module 0,5 Control BWO CNC 921 adjustment of stroke position 94 mm/Hub stroke 82 mm no. of strokes 75 - 1000 Hub/min number of teeth 5 - 200 taper of shaper cutter SK 45 table diameter 400 mm total power requirement 50 kW Gjdouwwlqopfx Ag Njuh weight of the machine ca. 7,5 t dimensions of the machine ca. 5,0 x 3,8 x 3,4 m Machine in top condition.

Condition: excellent (used), Year of construction: 1986, max. wheel diameter 600 mm gear width 410 mm max. module 20 min. module 0,1 clamping length max. 870 mm workpiece weight max. 800 kg weight of the machine ca. 2,1 t dimensions of the machine ca. 1,8 x 1,4 x 2,2 m Checking the dentation Checking the contact line on inclined tooth flanks Checking the tooth flanks on cutting/ scraper wheels Checking the profile and slope of worms Gusdsvvciuspfx Ag Nsh Checking of hobs

Condition: excellent (used), Year of construction: 2014, max. wheel diameter 20 - 320 mm gear width 150 mm max. module 8 Gusdpfx Agjv Nracj Noh min. module 1 surface area 1200 x 190 mm tool diameter 175 - 260 mm turning speeds 45 - 465 U/min total power requirement 13 kW weight of the machine ca. 5,2 t