Used Gear Testing Machine for sale (75,744)

Year of construction: 2025, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 54942, No minimum price – guaranteed sale to the highest bidder! EXW – Dismantling and loading must be organized by the buyer! TECHNICAL DETAILS Nominal test force: 50 kN Test stroke: < 1,400 mm Usable distance between pressure plates: approx. 800 mm Test area width: 500 mm Test speed: continuously variable 0.001–1,200 mm/min Resolution of displacement measurement: ≤ 0.001 mm Diameter of pressure plates: 246 mm Centering bore: 40 mm Thread: M12 Hardness: ≥ 56 HRC Design: Steel, hardened, rotatable at the top and bottom, lockable at 0° Measuring range of the enveloping circle: 30–250 mm Design: Probe with bearing rollers Measurement: Recording under load MACHINE DETAILS Control system: Control system with control computer Test program: Enveloping circle measurement Dcjdpfezx S Egox Ab Dol Network: Fast Ethernet, 100 Mbit/s between the control computer and the separately required operating PC Software delivery: USB stick with installation software Documentation: Version and license status not documented separately Last calibration: 08/04/2025 Dimensions & Weight Machine dimensions: approx. 750 × 900 × 1,950 mm Base frame dimensions: approx. 730 × 900 × 700 mm Control cabinet with control computer dimensions: approx. 600 × 600 × 1,900 mm Machine weight: approx. 490 kg Base frame weight: approx. 50 kg Voltage supply: 3 × 400 V AC, 50 Hz, N + PE Type plate power: 3,000 W Connected power: approx. 3 kVA EQUIPMENT Base frame Control cabinet with control computer Rotatable pressure plates Enveloping circle measuring device with probes and bearing rollers USB stick with installation software Compressed air connection: Pneumatic connection with shut-off valve Note: The functionality has been tested and confirmed. However, an unresolved error message on the drive prevents further use. The machine is in like-new condition visually. The operating PC is not included in the offer.

Condition: excellent (used), functionality: fully functional, Universal testing machine for material testing / material analysis Testing of tensile strength, bond tensile strength, and shear strength of masonry and wood connections, etc. - Nail pull-out test - Compression test on cement and mortar prisms - Bending test on cement and mortar specimens - Compaction test - Bending test on wood and concrete - Shear strength test on wood - Splitting test on wood - Scaffolding connection test - Shear strength test on walls Dsdpfx Ajxmv H Rsb Dscl - Tensile test on walls - Tensile test on structural steel - Tensile test on wood - Pull-out test on structural steel - Reversal bending test on structural steel - Anchor pull-out test - Bond tensile test I have made a video demonstrating the function of the testing machine. I can send this video to a mobile number via WhatsApp or Signal! Shipping and loading are possible at my warehouse!

Condition: used, Year of construction: 1959, total height: 1,900 mm, total width: 2,200 mm, total length: 1,500 mm, Colour: Blue Empty weight: 2.500 kg - Year: 1959 - Documentation available: Yes - CE certificate present: No - Serial number: 80 Dcsdpfxezkui Sj Ab Dsl - Drive system: Conventional - Power [kW]: 5.0 - Transport dimensions: 1500mm x 2200mm x 1900mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Material Testing Machine / Universal Testing Machine Type: BT2-FA005TN.A50.002 Article No. Base Machine: 1004473 Z005 TN AllroundLine Table-Top The system is a comprehensively equipped ZwickRoell Z005 TN AllroundLine tabletop testing machine. The system has been specifically configured for mechanical and functional testing of automotive injectors and injection systems. In addition, the system features pneumatic sample holders, a visual color recognition system, and a precision scale, as well as extensive product-specific accessories. Technical data: Testing machine: Maximum testing force of the load frame: 5 kN Total testing space height: 1,164 mm Testing space height at the bottom without attachments: 1,030 mm Testing space height at the top without attachments: 1,015 mm Testing space width: 440 mm Crosshead speed: 0.0005 to 3,000 mm/min Return speed: max. 3,000 mm/min Deviation of the drive speed: max. 0.05 % Drive stroke resolution: 0.959431 nm Positioning repeatability: ±2 µm Control: adaptive Control cycle: 1,000 Hz Load cell: Type: Xforce HP Rated force: 0.5 kN / 500 N Suitable for static and dynamic tensile and compressive forces Accuracy class 1 from 1 N Accuracy class 0.5 from 5 N Maximum operating force: 150 % of the rated force Limit force: 150 % of the rated force Breaking force: 300 % of the rated force Protection class: IP54 Connection thread: M28 × 1.5 Connection pin: Ø 20 mm Measuring and control electronics: ZwickRoell testControl II machine electronics DCSC measuring module for strain gauge load cells Measured value acquisition rate: 400 kHz Measured value transmission to PC: 500 Hz Automatic zero point correction Measured signal time correction Ethernet interface to PC Measuring amplifier for strain gauge full bridges Measuring range: 0.2 to 165 % of the rated measured value Measured value acquisition rate of the DCSC module: max. 10 kHz Force measurement technology according to ISO 7500-1 and ASTM E4 Testing device for automotive injectors: Article No.: 3002956 Maximum testing force: 200 N Dimensions: approx. 396 × 235 × 309 mm Weight: approx. 20 kg Pneumatic sample holders: Article No.: 3001461 Maximum testing force: 200 N Maximum opening width: 40 mm Closes on both sides and symmetrically Interchangeable clamping jaws Dimensions of the load frame: Height without base profiles: 1,314 mm Height with base profiles: 1,528 to 2,108 mm Width without base profiles: 680 mm Width with base profiles: 856 mm Width including machine electronics: 1,044 mm Depth with base profiles: 650 mm Depth including machine electronics: 690 mm Weight: Load frame with machine electronics: approx. 161 kg Base profiles: approx. 31 kg Machine with typical attachments: approx. 226 kg + Laser measuring system / visual color recognition system from Keyence + Precision scale: Article No.: 085770 Maximum load: 220 g Readability: 0.1 mg Repeatability at 200 g: 0.1 mg Linearity: 0.25 mg RS232 interface for data transmission Separate weighing cell, display unit and operating terminal + PC with ZwickRoell testXpert III testing software, version 1.2 + Microphone and many other accessories shown in the pictures Condition: used Optical condition according to the pictures Functional scope according to the pictures The complete configuration of all components and accessories, as well as the calibration of the system, must be carried out by the customer themselves. Dsdpfx Abezwvu Ne Djcl Shipping or freight shipping is possible. Subject to changes, errors and prior sale.

Condition: excellent (used), Material Testing Machine / Universal Testing Machine Type: BT2-FZ1.0TN.D16.001 Base System: zwickiLine Z1.0 TN Special Torsion Multi-Axis Material Testing System 1 kN / 2 Nm Technical Data: Testing Range: Maximum axial testing force Fmax: 1 kN Configured maximum testing torque Mmax: 2 Nm Types of tests: Tensile, compressive, and torsional Axial drive / crosshead: Crosshead speed: 0.0005 to 2,000 mm/min Max. return speed: 2,000 mm/min Speed deviation: max. 0.05 % Path resolution: 0.0554 µm Positioning repeatability: ±2 µm Controller: adaptive Control cycle: 1,000 Hz Testing chamber: Testing chamber height with crosshead angled upwards: 235 to 1,065 mm Testing chamber height with crosshead angled downwards: 90 to 920 mm Testing chamber depth: 105 mm Dimensions of base machine: Height of load frame without head crosshead: approx. 1,289 mm Width with machine electronics: approx. 411 mm Depth with machine electronics: approx. 622 mm Weight of base machine: approx. 76 kg Type: Torsional drive Item No.: 1023835 Maximum drive torque: 20 Nm Rotational speed: 0.01 to 20 rpm Accuracy of set drive speed: 0.05 % Control cycle: 1,000 Hz Axially permissible testing force on the torsional drive: ±5 kN Power connection torsional drive: 230 V / 1 Ph / N / PE Mains frequency: 50 / 60 Hz Power consumption under full load: approx. 2.3 kVA Torque sensor: Item No.: 069536 Rated torque: 2 Nm Limit torque: 150 % of the rated torque Accuracy class 1 from: 0.008 Nm Accuracy class 0.5 from: 0.02 Nm Protection class: IP65 Force sensor: Type: Zwick / Roell Xforce HP Item No.: 069531 Rated force: 1 kN / 225 lbf Max. operating force: 150 % of Fnom Accuracy class 1 from: 2 N Accuracy class 0.5 from: 10 N Protection class: IP54 Measurement and control electronics: Zwick / Roell testControl II Measurement value acquisition rate: 400 kHz Measurement value transfer to PC: 500 Hz Optionally expandable to: 2,000 Hz Control cycle: 1,000 Hz PC interface: Ethernet Measurement signal runtime correction: for all channels Protection class electronics: IP32 Safety device: Swiveling front safety device Electrically monitored interlock Protective screen made of transparent polycarbonate Material thickness of protective screen: 6 mm Dimensions of safety device: Height: approx. 1,237 mm Width: approx. 435 mm Depth: approx. 238 mm Testing tools / accessories: Pneumatic universal holder for pen systems Max. clamping force: 200 N Compressed air supply: 8 bar, filtered and unlubricated Pneumatic 3-finger gripper Max. clamping force: 50 N Dedpfx Abszwvtxs Docl Compressed air supply: 8 bar, filtered and unlubricated Alignment unit Torque sensor 2 Nm Xforce HP force sensor 1 kN Torsional drive Front safety device Zwick/Roell machine electronics Software: Zwick / Roell testXpert III testing softwareVersion: 1.2 + ALMEMO 2450 universal measuring device Humidity/temperature sensor FHAD4641 + Mettler Toledo precision balance Type: Mettler WXSE + Visual recognition system color Zwick Item No.: 3004644 Vision sensor: IV-G500CA Evaluation unit: IV-G10 Installation distance: 20 to 500 mm + Auto Injector Condition: used Optical condition according to the pictures Functionality according to the pictures The complete configuration of all components and accessories, as well as the calibration of the system, must be carried out by the customer themselves. Subject to changes, errors and prior sale.

Condition: good (used), Zwick Type: BT2-FZ0.5TS.D16 500 N + Xforce P 500N Material testing machine Testing force in tension/compression: 500 N Overall height, without head crossbeam: 789 mm Overall width: 411 mm Overall depth: 622 mm Installation area: net footprint: 0.008 m² load frame base area: 0.196 m² specific floor load: Dcodpfxjziixlj Ab Dsl based on typical installations: 0.85 kg/cm² with 50% safety margin: 1.28 kg/cm² Ceiling load: based on typical installations: 97 kN/cm² with 50% safety margin: 146 kN/cm² Working space depth: 105 mm Working space height with extension arm installed pointing upwards: minimum height: 235 mm maximum height: 565 mm Working space height with extension arm installed pointing downwards: minimum height: 90 mm maximum height: 420 mm Software: testXpert III Version 1.9 Weight: approx. 78 kg with accessories Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: used, Year of construction: 1979, max. wheel diameter 420 mm gear width 120 mm max. module 7 mm min. module 0,5 gear hobbing diameter - external 420 mm gear hobbing diameter - internal 370 mm table diameter 400 mm boring diameter 125 mm spindle stroke 120 mm stroke position adjustment 230 mm strokes - infinitely variable 30 / 800 Hub/min depth feed stepless 0,016 - 0,063 mm/Hub total power requirement 35 kW weight of the machine ca. 7,5 t Dcedpszv Ulqjfx Ab Djl dimensions of the machine ca. 2,46 x 3,48 x 2,66 m Accessories: - Various replacement wheels and blade holders - Documentation

Condition: good (used), Year of construction: 2004, Ref. -No.: 10612 Manufacturer: LIEBHERR Type: LC 3002 Year of construction: 2004 Type of control: CNC-Steuerung Control: LIEBHERR Storage location: Halberstadt Country of origin: Germany Serial no.: 30XX Max. Module: 30 mm Min. Module: 4 mm Max. Workpiece Diameter: 3000 mm ambient temperature: +15...+38 ° cutting speed: 25 - 250 m / min Dcsdpfx Abezx Nyhj Dsl Milling head swivel angle: 0,001 ° Resolution accuracy: 0,1 Degree Workpiece table load: 300 kN Operating voltage: 400 V control voltage: 24 V frequency: 50 Hz Max. rated current: 230 A Fuse in the supply line: 250 A Max. milling diameter spur gears/helical gears: 3.000 mm Further information: Suitable for internal and external gear cutting. The machine can be viewed by appointment.

Condition: used, Year of construction: 2007, control Siemens Sinumerik 840 D weight 57.000 kg voltage 400 V Gleason PFAUTER CNC gear hobbing machine P 2400/2800 for gear cutting of cylindrical and worm gears as well as all other regularly occurring rollable profiles and shapes on the cylindrical workpiece circumference. Large gear hobbing machines from Gleason offer maximum productivity for roughing and finishing cylindrical gears for many industries: wind turbines, industrial gearboxes, mining and shipbuilding, gear machining and many more. The power range of the drive takes future tool developments into account. Of course, the gear hobbing head drive is also backlash-free. These machines are particularly well suited for use with state-of-the-art, cutting materials, regardless of whether dry or wet machining is preferred. The machine can be used for dry or wet machining and is also equipped with the appropriate chip conveyor for both machining methods. The machine is equipped with an internal profile milling head as a motorised milling head. --> Working range and technical data Nominal workpiece diameter: 2.400 mm Dedpfx Aewzyp Isb Dscl --> Largest millable diameter approx.: 2.800 mm --> Smallest/largest distance between cutter and workpiece axis: 100/1.200 mm --> Largest axial slide travel (special design): 1.300 mm --> Largest clampable cutter (internal milling head): --> Diameter max: 440 mm --> Max. cutter width: 90 mm --> Swivel range of the internal profile milling head/vertical axis: +/- 15° --> Milling mandrel taper: HSK-B160 --> Maximum milling cutter travel: 300 mm --> Table diameter: 2.500 mm --> Part wheel diameter: 2.200 mm --> Table bore --> Diameter: 800 mm --> Depth: 875 mm --> Maximum table load approx.: 40.000 kg --> Max. feed and rapid traverse speeds: --> axial (Z-axis): 4.000 mm/min --> radial (X-axis): 3.000 mm/min --> tangential (Y-axis): 3.000 mm/min --> Milling cutter cooling lubrication device/electric centrifugal pump: approx. 150 l/min --> Increased drop height of magnetic chip conveyor: 1,600 mm --> Increased main stand: 1,300 mm axial slide travel --> Internal profile milling head as motor milling head instead of standard motor milling head --> Max. millable profile depth in steel with approx. 600 N/mm² strength: approx. 65 mm --> Infinitely variable milling speed: 50 - 150 min?¹ --> Max. milling cutter diameter: 440 mm --> Min. milling cutter base circle diameter: 310 mm --> Max. milling cutter width: 90 mm --> Min. internal diameter at 0° bevel angle: 800 mm+) --> Max. workpiece height at 0° bevel angle: 600 mm --> Max. workpiece ring thickness (including clamping device): 500 mm >> Wet and dry, 2 chip conveyors, table diameter 2500 mm

Year of construction: 2012, condition: used, max. wheel diameter 180 mm gear width ca. 220 mm max. module 3 / 5 mm Control Siemens 840D sl max. radial velocity 5000 mm/min max. workpiece diameter 180 mm table rotation speed 800 U/min table diameter 145 mm axial travel 250 mm mm axial travel 300 mm clamping force max. 13 kN swivelable +/- 45 ° drive capacity 23 kW turning speeds 6000 U/min diameter of tools max. 90 mm tool clamping length max. 211 mm module hobbing max. 3 module profile milling max. 5 tangential speed max. 7500 mm/min weight of the machine ca. 9,5 t dimensions of the machine ca. 4,5 x 3,5 x 2,7 m Equipment / Accessories: - The machine is equipped for dry milling. - workpiece magazine - parallel gripper: Dcjdpfsymf Daex Ab Dsl - workpiece weight form-fit max. 15 kg - workpiece length max. 400 mm

Condition: used, Year of construction: 2001, Technical details: max. wheel diameter: 200 mm gear width: 50 mm max. module: 6 table diameter: 168,14 mm boring diameter: 65,532 mm weight of the machine ca.: 11 t table turning speeds: 0-1.000 U/min length of stroke min./max.: 0-70 mm no. of strokes: 180-1.800 Stück This machine can be used to make tandler gears. However, for helical gearing, a helical guide is also required. Dsdpfx Ajxz Avbsb Djcl *

Condition: used, Year of construction: 2008, control Siemens 840D Hobbing Machines for Large Gears Flexible and Versatile Gear Hobbing Gleason’s large hobbing machines offer maximum productivity for roughing and finishing operations on cylindrical gears for many industries: wind turbines, industrial gearboxes, mining, and shipbuilding, gear machining, and many more. The guideways are wide and feature hydraulically preloaded guides, which are used in combination with a separate linear guide and backlash- free rollers. This ensures precise slide movements with every feed. The design of the worktable ensures optimal conditions for absorbing and transferring cutting forces to the machine base. The use hydrostatic table bearings, combined with the proven backlash-free double-worm gear, guarantees precise table movements and the highest flatness and concentricity accuracies of the worktable. This holds true regardless of significant fluctuations in workpiece weight and/or high machining forces. The motorized gear hobbing heads for external and internal gear cutting are Dcedpfxewzypns Ab Dol designed to meet the requirements of modern cutting tools. All machine sizes can be equipped with both external and internal gear hobbing heads. The power range of the drive takes future tool developments into account. Naturally, the gear hobbing head drive is also backlash-free. These machines are particularly well-suited for use with state-of-the-art cutting materials. >> dry only, 1 chip conveyor, table diameter 1,870 mm

Condition: used, max. wheel diameter 500 mm gear width 75 mm Djdpfx Abszw N E Ue Docl max. module 5 min. module 0,5 no. of strokes 45 - 424 Hub/min total power requirement 6 kW weight of the machine ca. 3,6 t dimensions of the machine ca. 2,0 x 1,4 x 2,3 m Rapid traverse in the table. Change gears, toolholders, manuals.

Condition: good (used), Year of construction: 1980, functionality: fully functional, Gear-driven drill press, no belt changes required Very quiet and smooth operation - Drilling capacity in steel ST 60: 30 mm - Drill spindle mount: MK 3 - Drill spindle stroke: 160 mm - 9 drill spindle speeds: 90 - 1450 rpm - Overhang: 300 mm - Table with 2 T-slots - Table dimensions, swiveling: 500 x 450 mm - Table dimensions, base plate: 350 x 400 mm - Distance from base plate to spindle nose: 1100 mm - Max. distance table - drill spindle: 660 mm - Height adjustable via rack and pinion with hand crank - Column diameter: 120 mm - Drive: 380 V / 1.2 kW - Space requirement: approx. W 600 x H 2100 x D 670 mm - Weight: approx. 350 kg Dcodpfezuxxfjx Ab Dol - Includes drill chuck

Condition: ready for operation (used), Year of construction: 1959, functionality: fully functional, machine/vehicle number: 80, total height: 1,900 mm, overall weight: 2,500 kg, total width: 2,200 mm, total length: 1,500 mm, power: 5 kW (6.80 HP), TECHNICAL DETAILS Power: 5 kW MACHINE DETAILS Dcedjzrmvtspfx Ab Del Drive system: Conventional Dimensions & Weight Dimensions (L x W x H): 1,500 x 2,200 x 1,900 mm Unladen weight: 2,500 kg Number of transport packages: 3 EQUIPMENT Documentation New Dathan knife sets Tools Measuring accessories

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, travel distance X-axis: 140 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 300 mm, workpiece length (max.): 400 mm, The design of the base machine is characterized by the following features: - Horizontal arrangement of the workpiece spindle; vertical arrangement of the milling spindle or milling head - The workpiece is mounted between the workpiece spindle stock (left) and the tailstock (right) - The radial slide is mounted on the base (X-axis) - The axial slide moves on the radial slide (Z-axis) - The swivel milling head is equipped with an automatic angle adjustment (A-axis); the swivel slide (Y-axis) moves tangentially to the workpiece diameter TECHNICAL DETAILS Travel range X-axis: 140 mm Travel range Y-axis: 100 mm Travel range Z-axis: 300 mm Tailstock travel W-axis: 420 mm Swivel angle of the end mill head A-axis (left): 50° Swivel angle of the end mill head A-axis (right): 60° Largest millable module with hob cutters according to DIN 8002: 4.5 mm Largest millable module for high-performance milling: 3.0 mm Number of teeth: 2–999 Workpiece diameter with manual loading: max. 200 mm Workpiece diameter with automatic loading: max. 150 mm Workpiece length: max. 400 mm Milling spindle speed range B-axis: 0–1,500 rpm Workpiece speed C-axis: 0–350 rpm Milling tool data Milling tool diameter: 40–102 mm Milling tool length: max. 230 mm Radial front diameter (standard): 16–32 mm Milling coordinates Z-axis: 100–400 mm X-axis: 130–150 mm Y-axis (end face of the milling spindle): 50–230 mm Dcodpfjzwmyiox Ab Del W-axis (end face of the tailstock spindle): 165–585 mm Feed rate X-axis: 3,500 mm/min Feed rate Z-axis: 3,500 mm/min Feed rate Y-axis: 4,000 mm/min Feed rate W-axis: 5,500 mm/min Feed rate V-axis (portal loader): 80,000 mm/min EQUIPMENT IBH control system Loading device Extensive range of accessories

Condition: excellent (used), max. wheel diameter 130 mm gear width 180 mm Dodpfx Absy Umize Decl max. module 2,5 min. module 0,3 turning speeds 140 - 900 U/min min. number of teeth 4 clamping length max. 200 mm Control Siemens max. workpiece diameter 80 mm total power requirement 3,5 kW weight of the machine ca. 2,9 t dimensions of the machine ca. 1,8 x 1,6 x 1,9 m

Condition: used, Year of construction: 2008, Maximum workpiece outer diameter 3420 mm workpiece diameter nominal 2400 mm max. module 30 mm control Siemens Sinumerik 840 D Minimal workpiece - internal diameter 630 mm Maximum workpiece outer diameter 3420 mm Maximum workpiece tooth width 600 mm max. rim strength 500 mm Maximum permissible head circle diameter 440 mm Hob/disc cutters – Maximum length 90 mm Milling arbour diameter 80 mm milling head -swivable +15/-15 Grad workpiece table outer diameter 1870 mm Workpiece table bore 600 mm Dedeztz Ruspfx Ab Djcl Workpiece table – Maximum permissible load 300 kN rapid traverse X-axis 3000 mm/min rapid travel z-axis 4000 mm/min Workpiece table speed 0-6 U/min Tools speed 18-180 U/min weight of the machine ca. 38 t dimensions of the machine ca. 8,41 x 9,05 x 5,19 m total connected load 100 kVA Equipment/accessories: - IFK2 internal milling head - Milling arbor with spacer discs - Chip conveyor - Oil mist extraction - Dry machining only - Technical documentation

Condition: used, Year of construction: 2007, max. workpiece diameter 2800 mm workpiece diameter nominal 2400 mm max. module 30 mm control Siemens Sinumerik 840 D Minimal workpiece - internal diameter 630 mm Dodpsw Rf S Sefx Ab Docl Maximum workpiece outer diameter 3800 mm Maximum workpiece tooth width 600 mm max. rim strength 50 mm Maximum permissible head circle diameter 440 mm Hob/disc cutters – Maximum length 90 mm Milling arbour diameter 80 mm milling head -swivable +15/-15 Grad workpiece table outer diameter 2500 mm Workpiece table bore 800 mm Workpiece table – Maximum permissible load 400 kN Rapid traverse on the X and Y axes 3000 mm/min rapid travel z-axis 4000 mm/min Workpiece table speed 0-4 U/min Tools speed 18-180 U/min Cutter arbor cone HSK-B160 weight of the machine ca. 57 t dimensions of the machine ca. 10,7 x 8,1 x 4,85 m total connected load 100 kVA Equipment/Accessories: - IFK2 internal milling head - Milling spindle with spacer discs - Chip conveyor - Oil mist extraction - Wet and dry machining possible - 2 chip conveyors - Technical documentation

Condition: used, Year of construction: 2004, Technical details: Dcsdpovi Ninofx Ab Djl max. wheel diameter: 130 mm gear width: 25 mm module max. : 3 module min. : 0,5 control: Siemens 840D work-spindle diameter: 85 mm strokes - infinitely variable: 500 - 2500 Hub/min stroke: 30 mm total power requirement: 48 kVA weight of the machine ca.: 11,5 t space requirements approx. LxWxH: 4,7 x 3,0 x 3,3 m Equipment: -Counterholder with tip -chip conveyor -hydraulically operated counterholder arm and linear guides i.D. *

Condition: good (used), functionality: fully functional, Tos OFP-32, Serial No. 0427441 Condition: 8/10 Dcodpfx Aszxqdzjb Djl Max. module: 7 / 9 Max. diameter: 320 mm Max. length: 200 mm Vertical gear hobbing machine

Condition: refurbished (used), Year of construction: 2004, functionality: fully functional, Fully reconditioned milling head from a Gleason Pfauter P210L – manufactured in 2004. Dcedpfxezr Hd Rj Ab Dsl

Condition: excellent (used), Zwick / Roell Type: Z020 Allround-Line BT1-FR020TN.A50 Zwick / Roell Materials Testing Machine 20 kN Tensile & Compression Testing testXpert III For sale is a high-quality Zwick / Roell materials testing machine for professional tensile and compression testing of materials and components. The machine is suitable for metals, plastics, rubber, and many other materials and is typically used in laboratories, quality assurance, research, and education. Control is via PC using Zwick/Roell testXpert III software (data carrier & documentation included). Technical Data: Rated test force: 20 kN Test direction: tensile & compression Power supply: 230 V / 50–60 Hz / single-phase Power consumption: approx. 2.1 kVA Weight: approx. 150–180 kg Dimensions: approx. 856 × 650 × 1,545–2,114 mm Technical data (according to documentation & nameplate) Mechanics / Testing Nominal force: 20 kN Testing direction: tensile & compression Max. test frequency: 0.5 Hz Crosshead: servo-electric Positioning accuracy: < 1 µm Speed range: 0.0005 – 1,000 mm/min Dimensions & Weight: Total height: approx. 1,545 – 2,114 mm (depending on crosshead position) Total width: approx. 856 mm Total depth: approx. 650 mm Working area width: 440 mm Weight: approx. 150 kg (base unit) approx. 180 kg with typical configuration Electrical Data Power supply: 230 V AC Phases: single-phase (1PH, N, PE) Mains frequency: 50 / 60 Hz Current consumption: approx. 8–10 A Power consumption: approx. 2.1 kVA Plug: Schuko (CEE 7) Measuring & Control Electronics: Dcjdpfx Aezimgteb Dol Internal data acquisition: 500 Hz Data transmission to PC: adjustable 10–100 Hz Interface: RS232 (COM) Electronics housing protection class: IP32 Important note: 'The table shown in the photos is not included in the sale.' Condition: used Scope of delivery: (see picture) - Zwick / Roell materials testing machine (20 kN) - Electronics unit - PC workstation (monitor, PC – please see photos for condition) - 2 measurement modules (Delock units) - Zwick/Roell testXpert III software (data carrier) - Original operating and technical documentation - Various connection and interface cables (Specifications are subject to change and errors excepted!) If you have any questions, we will be pleased to assist you by phone.

Condition: excellent (used), Zwick / Roell Z020 Allround-Line BT2-FR020TNW.A50 Material Testing Machine, 20 kN Manufacturer: Zwick / Roell Series: Z020 Allround-Line Type: BT2-FR020TNW.A50 Machine Type: Servo-electric Material Testing Machine / Universal Testing Machine Max. Testing Force: 20 kN For sale is a used Zwick / Roell Z020 Allround-Line material testing machine with testControl II control system, industrial PC, and installed testXpert V3.5 software. The machine is suitable for tensile and compression tests on metals, plastics, elastomers, composite materials, and numerous other materials, and is used in testing laboratories, quality assurance, research and development, and training. Technical Data: Manufacturer: Zwick / Roell Series: Z020 Allround-Line Type: BT2-FR020TNW.A50 Max. Testing Force: 20 kN Testing Direction: Tensile and Compression Testing Space Height: 1,000 mm Crosshead Speed: 0.0005–1,000 mm/min Power Supply: 230 V / 50–60 Hz Power Consumption: 8 A Control System: testControl II Software: testXpert V3.5 Load Cell: Zwick / Roell Xforce P 20 kN Zwick / Roell Xforce P 2.5 kN Dimensions: Machine Dimensions (W × D × H): approx. 1,244 × 690 × 1,324 mm Machine Weight: approx. 212 kg Equipment: testControl II control system Industrial PC with installed testXpert V3.5 software 20 kN Xforce P load cell 2.5 kN Xforce P load cell Testing table Testing fixture Connection and cabling Accessories as shown in the pictures Shipping Data: Dimensions (W × D × H): approx. 1,244 × 690 × 1,324 mm Shipping Weight: approx. 212 kg Condition: Used Optical condition as shown in the pictures. Functional scope as shown in the pictures. Nameplates present. Scope of Supply: Zwick / Roell Z020 Allround-Line BT2-FR020TNW.A50 testControl II control system Industrial PC with installed testXpert V3.5 software 20 kN Xforce P load cell 2.5 kN Xforce P load cell Testing table Testing fixture Connection and cabling Further accessories as shown in the pictures The table, monitor, keyboard, and mouse shown in the photos, as well as any other items not explicitly mentioned, are not included in the sale. Availability: by arrangement. Scope of supply as shown in the pictures. Dcsdszra Rqopfx Ab Del Subject to changes, errors, and prior sale.

Condition: used, Technical details: Dcedpfx Abszi R R As Dsl traction force: 250 kN control: SCHENCK HYDROPULS PSB dayligth: 1000 - 1200 je nach Spannwerkzeug /acc. clamp.tool mm piston stroke: 180mm mm A servo-hydraulic leaf spring testing machine with Series 65 digital electronics is designed for testing leaf springs used in commercial vehicles, railway vehicles, and industrial applications. A hydraulic actuator applies defined loads while force, displacement, and, if required, strain are measured. Typical tests: ·Static spring characteristic (force-displacement curve) ·Fatigue and endurance testing ·Cyclic load testing ·Service life testing ·Tensile and compression testing ·Production quality control *