Used Gear Testing Machine for sale (76,372)

Condition: used, Manufacturer: WMW Type: ZFW-Z 160x3 Gear hobbing machine Itedpeyy N Hyefx Ad Ijl Max workpiece diameter: ca. 160 mm Max modul: 3 Operated manual and semi-automatic Structure: Sturdy, precision-engineed machine designed for high accurance in gear production

Condition: excellent (used), Here, we offer a Zwick / Roell tensile testing machine, a tabletop testing machine. Zwick / Roell materials testing machine BDO-FB0.5TH Testing loads in tensile/compressive direction: 500 N Height: 1565 mm, Width: 292 mm, Depth: 469 mm Width of the test area: infinite Test area depth: 100 mm Max. working stroke without accessories: 1266 mm PC or printer interface: RS 232 Required PC connection (for PC operation): COM 1 Power data: 115/230 V (PH, N, PE) Rated power: 0.4 kVA Mains frequency: 50/60 Hz Weight: 47 kg Type: BDO-FB0.5TH Condition: used Scope of delivery: (See picture) Itsdezdr Hnjpfx Ad Iol (Changes and errors in the technical data and information are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, Technical details: z-travel: 1250 mm swing diameter over bed: 260 mm workpiece dia. over bed: 500 mm workpiece dia. over support: 250 mm center height over bed: 260 mm hobbing length: 2000 mm module max. : 8 / 12 total power requirement: 9,5 kW Itsdpfjv U Un Hsx Ad Iel weight of the machine ca.: 3,8 t

Condition: used, Year of construction: 2001, Technical details: max. wheel diameter: 200 mm gear width: 50 mm max. module: 6 Isdpsxz Avbjfx Ad Ietl table diameter: 168,14 mm boring diameter: 65,532 mm weight of the machine ca.: 11 t table turning speeds: 0-1.000 U/min length of stroke min./max.: 0-70 mm no. of strokes: 180-1.800 Stück This machine can be used to make tandler gears. However, for helical gearing, a helical guide is also required. *

Condition: excellent (used), Year of construction: 2017, Traverses X Y Z: 710 x 450 x 510mm, Table size 760mm x 430mm, spindle speed 8000rpm, spindle motor power 20Hp, Siemens 828D Control with Shopmill, rapid feed XYZ axis 20m/min, Spindle taper BT40, 24 station ATC Itodsw U Sf Topfx Ad Iol

Condition: good (used), Year of construction: 1990, machine/vehicle number: 328501, Offer 25366 Technical Data: - Drilling capacity: 25 mm - Spindle taper: MT 3 - Spindle speeds: 100 / 205 / 345 / 440 rpm and 695 / 885 / 1450 / 2900 rpm - Spindle stroke: 130 mm - Spindle overhang: 260 mm Itjdpfx Aexu U Sujd Iol - Coordinate table with 3 T-slots: 580 x 240 mm - Table travel X-axis: 415 mm - Table travel Y-axis: 155 mm - Drive: 400 V / 0.75 / 0.9 kW - Required space: approx. W 900 x H 1800 x D 700 mm - Weight: approx. 270 kg - Machine vice

Condition: used, Year of construction: 2016, For sale Duplo 746 Cutter creaser. Year 2016 Top Spec with extra optional Modules includes: CPM-04 RTM-04 Current product, fully supported by Duplo offering support, Supply of spare parts and supported! 1 owner from new, Previous client paid 90K new!! Very nice condition. These new cost £90k Plus, Machine is in stock in my warehouse. Inspecting and testing welcome in Tadley Reading. The Duplo DC-746 Cutter Creaser is Duplo’s most powerful and versatile slitter, cutter, and creaser, designed to handle high-volume production with precision and speed. Ideal for applications like business cards, brochures, and intricate direct mail pieces, it streamlines complex finishing tasks in a single pass. With advanced features, including a high-capacity feeder, automated setup for up to 30 jobs, and lightning-fast speeds of up to 50 sheets per minute, the DC-746 ensures maximum productivity. Its enhanced feeding mechanism supports a wide range of paper types, delivering unparalleled accuracy even for digital stocks prone to curl or static. The DC-746 is expandable with optional modules for rotary perforating and cross-perforating, making it a perfect choice for PSPs looking to increase efficiency, reduce manual intervention, and produce premium-quality finished products. Specification and Features Machine Dimensions W 3040mm x D 870mm x H 1730mm (with PC) Isdpjzx Htfjfx Ad Istl Automated Set-up From barcode In-feed Paper Size Min: 210mm x 210mm Max: 370mm x 670mm Creases Max. 20 per sheet Cuts Max. 30 cuts per sheet Slits Six (standard) (8 with options fitted) Ideal for Business cards Folded flyers Tickets Perforated vouvhers

Condition: used, functionality: fully functional, total height: 1,100 mm, table diameter: 310 mm, overall weight: 5,000 kg, total width: 2,300 mm, total length: 1,800 mm, For sale is a gear hobbing machine as shown in the attached pictures. Manufacturer: LORENZ Max. wheel diameter: 500 mm Max. module: 5 Max. gear width: 100 mm Max. gear shaping length: 75 mm Number of strokes/min of the cutter: 45 / 424 Cutting speed: 18 Screw diameter: 78 mm Max. gear shaping diameter: 500 mm Max. external shaping diameter: 500 mm Itodpfozz Ilnox Ad Iol Max. internal shaping diameter: 450 mm Hole diameter of the table: 125 mm Diameter of table: 310 mm Total power: 3.0 kW Voltage: 220 / 380 V

Condition: used, MONNIER + ZAHNER MZ 120 is a Worm gear cutting machine, built for precision, high accuracy and reliable operation. Capacities: workpiece diameter 2–40 mm, module max 1.5 mm, workpiece length max 250 mm, max cutting length 150 mm, cutter diameter 16–32 mm. Specs: milling spindle speed max 8000 t/min, work piece spindle speed 770 t/min, milling spindle drive 1 kW, max milling head inclination 45°. Accessories: sprinkle cooling device, lamp, switch cabinet air conditioner. Achieves tight tolerances; typical sectors: automotive, watchmaking, machine tools, aerospace, medical. Itedpfoza Ukijx Ad Ijl

Condition: used, Year of construction: 1999, Technical details: max. wheel diameter: 180 mm max. module: 7 hob turning speeds: 200-2000 U/min min. number of teeth: 4 excluding conveyor belt Itedpfx Asyzxbijd Iel *

Condition: excellent (used), Year of construction: 2006, operating hours: 53,244 h, functionality: fully functional, Technical Data – Gleason Phoenix II 600HC (CNC Hypoid Gear Cutting Machine) Working Area Max. workpiece diameter: Ø 600 mm Max. tooth depth: 24.6 mm Max. gear width: 110 mm Number of teeth: 1–300 Cutterhead size face milling (FM): 18" diameter Cutterhead size hobbing (FH): 210 mm radius Max. cutter spindle speed: 600 min⁻¹ Work Spindle Front taper diameter: Ø 203 mm Taper bore diameter: Ø 181 mm Bore depth: 884 mm Max. work spindle speed: 600 min⁻¹ Dimensions and Weight Footprint L × W × H: 4.4 × 3.5 × 3.5 m (incl. peripherals) Machine weight: 26,000 kg Connection Data Total connected load: 139 kVA Main fuse: 200 A Operating voltage: 400 V Mains frequency: 50 Hz Ijdpfsxwzu Iox Ad Iotl Control voltage: 24 V DC

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, type of input current: AC, input voltage: 230 V, Equipment: documentation/manual, Keyence XM-C1000 Portable Coordinate Measuring Machine / Measurement System Manufacturer: Keyence Model: XM-C1000 Condition: Used, fully functional For sale is a used Keyence XM-C1000 measurement system for precise 3D coordinate measurement of components and assemblies. The system enables fast and reproducible measurements without complex programming and is ideal for quality assurance, incoming goods inspection, first article inspection, and production monitoring. The XM-C1000 impresses with its ease of use, high measurement accuracy, and flexible application possibilities. Measurements of distances, diameters, positions, angles, and geometric tolerances can be performed and documented efficiently. Technical features: Portable optical coordinate measuring system Precise 3D measurements Intuitive user interface Fast inspection processes Automatic measurement reports Ideal for production and quality assurance Condition: Used Fully functional Good optical condition Normal signs of wear and tear Inspection and functional testing possible by appointment Scope of delivery: Keyence XM-C1000 measurement system Iodoztzm Nspfx Ad Ietl Existing accessories as shown in the picture Documentation

Condition: used, Year of construction: 2005, Technical details: weight of the machine ca.: 8 t dimensions of the machine ca.: 2,95 x 1,6 x 2,36 m chucking diameter: 250 mm swing diameter: 265 mm x-travel: 170 mm z-travel: 200 mm spindle turning speed range: 1.500 U/min spindle bearing diameter: 100 mm Pick-up machine * Iodpfxeizlh Hj Ad Iotl

Condition: used, Year of construction: 2007, control Siemens Sinumerik 840 D weight 57.000 kg voltage 400 V Gleason PFAUTER CNC gear hobbing machine P 2400/2800 for gear cutting of cylindrical and worm gears as well as all other regularly occurring rollable profiles and shapes on the cylindrical workpiece circumference. Large gear hobbing machines from Gleason offer maximum productivity for roughing and finishing cylindrical gears for many industries: wind turbines, industrial gearboxes, mining and shipbuilding, gear machining and many more. The power range of the drive takes future tool developments into account. Of course, the gear hobbing head drive is also backlash-free. These machines are particularly well suited for use with state-of-the-art, cutting materials, regardless of whether dry or wet machining is preferred. The machine can be used for dry or wet machining and is also equipped with the appropriate chip conveyor for both machining methods. The machine is equipped with an internal profile milling head as a motorised milling head. --> Working range and technical data Nominal workpiece diameter: 2.400 mm --> Largest millable diameter approx.: 2.800 mm --> Smallest/largest distance between cutter and workpiece axis: 100/1.200 mm --> Largest axial slide travel (special design): 1.300 mm --> Largest clampable cutter (internal milling head): Itsdewzyp Iepfx Ad Iel --> Diameter max: 440 mm --> Max. cutter width: 90 mm --> Swivel range of the internal profile milling head/vertical axis: +/- 15° --> Milling mandrel taper: HSK-B160 --> Maximum milling cutter travel: 300 mm --> Table diameter: 2.500 mm --> Part wheel diameter: 2.200 mm --> Table bore --> Diameter: 800 mm --> Depth: 875 mm --> Maximum table load approx.: 40.000 kg --> Max. feed and rapid traverse speeds: --> axial (Z-axis): 4.000 mm/min --> radial (X-axis): 3.000 mm/min --> tangential (Y-axis): 3.000 mm/min --> Milling cutter cooling lubrication device/electric centrifugal pump: approx. 150 l/min --> Increased drop height of magnetic chip conveyor: 1,600 mm --> Increased main stand: 1,300 mm axial slide travel --> Internal profile milling head as motor milling head instead of standard motor milling head --> Max. millable profile depth in steel with approx. 600 N/mm² strength: approx. 65 mm --> Infinitely variable milling speed: 50 - 150 min?¹ --> Max. milling cutter diameter: 440 mm --> Min. milling cutter base circle diameter: 310 mm --> Max. milling cutter width: 90 mm --> Min. internal diameter at 0° bevel angle: 800 mm+) --> Max. workpiece height at 0° bevel angle: 600 mm --> Max. workpiece ring thickness (including clamping device): 500 mm >> Wet and dry, 2 chip conveyors, table diameter 2500 mm

Year of construction: 2025, condition: new, Max. testing force 5 kN, actual WINDOWS software (free programmable testing procedure) more than 600 ready prepared testing results - demo machine for special price The machine state is as new. Price of machine is without clamping heads (shown on the photo) because this equipment will be delivered as option according to your requirements. Price includes: - Machine 100 % functional - incl. load cell 5 kN (quality class 0.5 from 50 - 5000 N) - warranty 24 month - software Graphwork 6 (actual) - without clamping heads (as option) - without costs for delivery (depending on distance) - incl. setup, training Optional: - clamping heads - bending support - compression plates - extensometer - climatic chamber Even everything for to perform standard test procedures or according to you company requirements up to high performance testing equipment like MICRON LASER SPECKLE (optical Laser Speckle extensometer for non contact measuring of elongation for metal, plastic and other... Please ask for different machines with higher / lower forces, special equipment or applications: We offer new machines with highest quality and best price ratio at fair prices! Itjdpfx Aedb Nfpsd Ijl Photos shows machine with optional equipment!

Condition: used, Year of construction: 2006, Technical details: max. wheel diameter: 300 mm max. module: 7 weight of the machine ca.: 15 t table turning speeds: 100 U/min Itjdpfx Aoyz Sd Rsd Ijl table diameter: 180 mm hob turning speeds: 750 U/min max. hob diameter: 300 cutter length max.: 230 mm Liebherr LC300 with loading automation Machine including counter holder The machine used to work with emulsion *

Condition: excellent (used), Year of construction: 1980, Horizontal gear hobbing and threading machine for gears, splined shafts, worm screws, threads, and pinions up to 5 meters in length, complete with 3 milling heads models APFW, APGS, APG, set of gears, various steadies, and indexing device. Itjdpfoyba Rwox Ad Iol

Condition: used, Year of construction: 2018, Nominal power in kilowatts 7,7 MW Maximum power 8,47 MW Nominal turning speed 1150 1/min Maximum turning speed 2200 1/min Nominal torque 63940 Nm Maximum torque 70330 Nm 8 MW test bench for gears, closed loop Itedpfxsrr Amme Ad Isl

Condition: used, Year of construction: 1963, Technical details: max. wheel diameter: 900 mm max. module: 10 Iedpfx Adsvkpu Ho Ietl weight of the machine ca.: 8200 kos. hob dia. - max.: 190 mm cutter length max.: 320 mm milling spindle speeds (infinitely variable): 13-80 U/min workpiece length - max.: 750 mm max. workpiece diameter: 150 mm Counter holder milling mandrel is missing *

Condition: excellent (used), Year of construction: 2011, operating hours: 49,000 h, functionality: fully functional, KLINGELNBERG OERLIKON G 27 – Bevel Gear Grinding Machine Manufacturer: KLINGELNBERG AG Brand: KLINGELNBERG OERLIKON Series / Model: G 27 Year of Manufacture: 2012 Type: Bevel Gear Grinding Machine Condition: Excellent – all tolerances within manufacturer's specifications Location: Bavaria, Germany Nearest Airport: Munich Application Areas - Spiral and hypoid bevel gears Ijdpfxjxuwmne Ad Ietl - Planetary gears - Passenger car and commercial vehicle transmissions - Agricultural and forklift drive systems - Special gear units - Helicopter gearboxes - ...and many other precision applications Technical Specifications - Max. gear diameter: 300 mm - Max. module: 8 - Min. module: 0.7 - CNC control: Siemens Sinumerik 840D Solution Line - Software: KIMoS5 (Klingelnberg Integrated Manufacturing of Spiral Bevel Gears) - Min./max. bevel angle: −90° / +90° - Workpiece spindle bore: 127 mm - Grinding wheel diameter: 50 – 230 mm - Grinding spindle speed (stepless): up to 7,500 rpm - Workpiece spindle speed: up to 700 rpm - Connected load: 146 kW - Machine weight: approx. 21 t - Machine dimensions (L × W × H): approx. 9.5 × 3.6 × 3.1 m - Integrated probe unit at grinding head - External grinding spindle cooling - ELBARON oil mist extraction system (integrated) - HOFFMANN coolant filtration system

Condition: used, Year of construction: 2007, x-travel 900 mm y-travel 300 mm z-travel 1000 mm control Siemens 840D max. workpiece dia. 1600 mm max. module 20 mm tip circle diameter 350 mm weight of the machine ca. 33500 kg dimensions of the machine ca. 10,53 x 6,38 x 4,68 m Technical details: - x-travel: 900 mm - y-travel: 300 mm - z-travel: 1000 mm - Control system: Siemens Sinumerik 840D - Workpiece diameter - max.: 1600 mm - Module - max.: 20 mm - Head circle diameter: 350 mm - Milling spindle diameter: 375 mm - Total power consumption: 80 kVa - Machine weight approx.: 33500 kg - Space requirement approx.: 10.530 x 6.375 x 4.680 m Feed rate: - X-axis 1 to 3000 mm/min - Y-axis 1 to 3000 mm/min - Z-axis 1 to 4000 mm/min Spindle speeds in 1/min: - Tool 26 to 265 - Workpiece table 0 to 8 Itjdpfswzypuex Ad Iol Equipment/accessories: - Motor milling head M 2 - Milling mandrels - Oil cooler - Technical documentation

Condition: used, Year of construction: 2003, max. wheel diameter 275 mm gear width 58 mm max. module 13 min. module 2 Control SINUMERIK 840 D number of teeth 5 - 200 ratio of transmission 10:1 cutter diameter max. 228 mm x-axis 25 - 350 mm y-axis +/- 175 mm z-axis 125 - 600 mm b-axis -5 / +90 ° total power requirement 75 kW weight of the machine ca. 11,7 t dimensions of the machine ca. 12,5 x 3,0 x 3,0 m Ijdjx R U E Nopfx Ad Ijtl Both Spindles retrofitted in 07/2026 Equipped for dry milling Pressure deburrer Deburring device with driven brush Integrated magnetic chip conveyor Promot Cellmaster Cartridge pulse filter system User interface control works with Gleason Summary

Condition: used, Year of construction: 2007, x-travel 900 mm y-travel 300 mm Isdew Rrb Hspfx Ad Iotl z-travel 1000 mm control Siemens Sinumerik 840D max. workpiece diameter 1600 mm max. module 20 mm tip circle diameter 350 mm Milling arbour diameter 375 mm Total closing value 80 kVa weight of the machine ca. 33,5 t dimensions of the machine ca. 10,530 x 6,375 x 4,680 m Feed rate: - X-axis 1 to 3000 mm/min - Y-axis 1 to 3000 mm/min - Z-axis 1 to 4000 mm/min Spindle speeds in rpm: - Tool 26 to 265 - Workpiece table 0 to 8 Equipment/accessories: - M 2 motor milling head - Milling mandrels - Oil cooler - Technical documentation

Condition: used, Year of construction: 2001, Technical details: Iedpfxsxxl Sgs Ad Ietl max. wheel diameter: 50 mm gear width: 20 mm max. module: 4 mm min. module: 0,1 mm total power requirement: 12,5 kW weight of the machine ca.: 4000 kg dimensions of the machine ca.: 2,2 x 2,5 x 2,3 m workpiece length - max.: 300 mm

Condition: used, Year of construction: 2009, functionality: fully functional, 1 Universal Testing Machine Type H 10 KM Used device with Windows 11 software for tensile, compression, and bending tests; comes with one pair of wedge grips up to 10 kN and a certificate for tensile and compression displacement measurement. For testing in tension, compression, shear, bending, etc. • This is a dual-spindle benchtop model. • The machine complies with DIN 51220 and 51221, Class 1. • Digital display for force and displacement, 4½ digits, with peak value memory. Itodpfx Ajxghlfsd Iel • Five-range automatic switching for force and displacement measurements. • Digital speed adjustment from 0.5 to 1000 mm/min in increments of 0.1 mm. • Break detector and automatic return function are standard features. • Driven by a precision servo motor with high-frequency chopper control unit and digital feedback for load-independent, constant speed. • Quiet operation thanks to toothed belt drive and ball screw spindles with bellows cover. • Fully computer-controllable via RS 232 interface. Max. load: 10 kN in tension and compression Max. travel: 1150 mm without grips Force measurement: Strain gauge Measurement principle: Temperature-compensated Displacement measurement: Built-in optical encoder, 0.01 mm resolution Power supply: 220-250 V, 50-60 Hz Power consumption: 1.0 kW Dimensions: Height 1575 mm, Width 635 mm Clear width of frame: 410 mm Weight: approx. 95 kg Includes: 10 kN load cell and certificate for force and displacement.