Used Gear Testing Machine for sale (97,665)

Condition: used, Zwick Tensile Test Machine Type: HA 50 Dimensions: Height 2685 mm Footprint: 1600 cm² Technical Specifications: Fmax: 50 kN Vmax: 1500 mm/s Accessories: Kistler 50 kN force sensor via NI-Labview Hydraulic power unit 280 bar Footprint: 415 cm² Clamping tool/specimen holder included Iedpfx Aov Rdp Esdija (Universal flange, high-strength jaws for specimen holders) Computer + software testXpert R V6.0.0 Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical specifications, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), functionality: fully functional, Universal testing machine for material testing / material inspection Testing of tensile strength, bond tensile strength, and shear strength of masonry & wood joints, and similar applications. - Nail pull-out test - Compression test on cement and mortar prisms - Flexural test on cement and mortar samples - Compaction test - Flexural test on wood, concrete - Shear strength test on wood - Splitting tensile strength test on wood - Scaffold connection test - Shear strength test on masonry - Tensile test on masonry - Tensile test on reinforcing steel Iedoxmv H Rjpfx Adiea - Tensile test on wood - Pull-out test on reinforcing steel - Reverse bending test on reinforcing steel - Dowel pull-out test - Adhesion tensile test I have made a video demonstrating the machine's operation. I can send this video to a mobile number via WhatsApp or Signal!

Year of construction: 2013, condition: good (used), Universal testing machine Zwick/roll Type: 1488 Modernized in 2013 with software Iodpfsxw N Uvox Adisa Test force max.: 200 kN Required space: width: 2,000 mm, height: 2,100 mm, depth: 800 mm, weight approx. 1,000 kg.

Condition: ready for operation (used), functionality: fully functional, Used gear grinding machine Niles ZSTZ 630i. The machine is fully functional; a video can be provided upon request. Isdpoxzfugofx Adija

Condition: used, Static Universal Testing Machine AllroundLine with two test chambers Tensile Testing Machine, Compression Testing Machine ZWICK / ROELL Type AllroundLine Z010 / TH2S Year of manufacture: 1996 Model: BZ010TH2S . 132583/96 . 406678 Design: Benchtop testing machine Test force: 10 kN (1000 kg) Test chamber height: 1458 mm Test chamber width: 440 mm Crosshead speed: mm/min Drive travel resolution: 0.0625 µm Repeatability accuracy: ±2 µm Iedpfx Ajxanrxsdiea Motor power: 500 W Power supply: 230 Volt, 50 Hz Rated current: 3 A Power consumption: 800 VA Interface: RS485 - For tensile, compression, and bending tests on material specimens, components, and assemblies - Equipped with TH2S control unit (machine controller) - Data output via RS485 - 1 piece load cell for measuring compression and tensile forces, AST Type KAF-W (Angewandte System Technik GmbH, year 2013) The machine is sold without PC and without software, only the described load cell is installed. Space requirement (W x D x H): 1000 x 650 x 1920 mm Weight: approx. 220 kg Good condition

Condition: used, Year of construction: 2021, functionality: fully functional, Gear Measuring Machine (New / Demonstration Machine) Four-axis gear measuring machine for gearing, suitable for workpieces with a diameter up to 400 mm. All axes equipped with air bearings for maximum precision. X, Y, and Z axes made of granite for uniform thermal behavior. Granite base frame with high stability and integrated passive vibration damping system. No separate foundations required. The gear measurement accuracy complies with VDI/VDE 2612/2613, Group I. Standard equipment: Base machine with rotary table Ø 300 mm, counter bearing (tailstock) Renishaw SP600 probe CNC control consisting of industrial PC and accessories Swiveling housing for keyboard, monitor, and mouse Control panel with 2 joysticks, emergency stop button, override potentiometer Basic set of probe accessories Calibration sphere Ø 25 mm with certificate Software for remote maintenance via Internet Operating manual, technical documentation Color: Light gray RAL 9002 and Gray B – RAL 7043 TGear software: Software for the measurement of gears with external and internal toothing, straight and helical gearing (PTB certified) Profile and flank inspection Pitch and runout inspection Measurement of crowned gearings Iodpfxjxy Iv Re Adiea Inspection of profile and flank modifications using K-diagram Numerical measurement of tip and root relief Calculation of Wildhaber dimension, tooth thickness, measurement over 2 balls or 1 ball, or measurement over rollers Inspection of all teeth Topographical representation of the flank form based on profile and flank measurement Output of measurement reports in PDF format Additional content: TStylus – program for probe management TCali – program for probe calibration TAlign – calculation of axis positions and compensation up to 2 mm Testing according to standards (Q-DIN 3961/62), (Q-AGMA 2000), (Q-AGMA 2015)

Condition: excellent (used), GALDABINI Type: Quasar 50 / Nominal Capacity: 50 kN with PC, monitor, and GraphWork 5 testing software Universal Testing Machine The "QUASAR" universal testing machines are designed as single-room testing machines and essentially consist of the following components: Machine frame. The design and structure of the machine load frame is designed where necessary for the specified maximum loads: Electromechanical load application with toothed belt drive, toothed belt pulleys, drive with DC or brushless servo motor, and recirculating ball screws. Load measuring system with load cell suitable for tension and compression. Iedev Tywqopfx Adiea Electronic control unit that performs all functions: Regulation and control, monitoring, and recording of the output signals of the measuring amplifiers for force, strain, and crosshead travel. The system is based on a 32-bit processor with a clock speed of 25 MHz; The analog signals are acquired by an A/D converter with 20-bit resolution. The electronic control system is usually located in the base of the machine. This also applies to most of the electrical components of the drive and power supply. The operator interface is connected to the PC via an RS232 serial interface with a high transmission speed of 38400 baud. Rigid two-column system with a maximum capacity of 50 kN. Suitable for metals, plastics, composites, and other materials. Stylish design and advanced features. Flexible and modular design for easy future expansion. Key technical advantages include extremely high resolution of load and stroke values, as well as a minimum test speed of 0.0005 mm/min for the highest performance and most accurate results. Technical specifications: Nominal capacity: 50 kN Speed at maximum load: 0.0005÷200 mm/min No-load speed: 500 mm/min Distance between clamps: 1000 mm Total stroke: 1000 mm Crosshead travel resolution: 0.1 µm Positioning repeatability: 2 µm Distance between wedge clamps: 480 mm Clearance between columns: 410 mm Unit of force Newton - daN - kgf - Ibs Dimensions: Height: approx. 1548 mm Width: approx. 700 mm Depth: approx. 730 mm Power supply: 220V (+10%) 50 Hz Power consumption: 0.65 kW Weight: approx. 255 kg without accessories Recommended lighting during use: 300 lux Weight: approx. 255 kg Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: used, Year of construction: 2001, Technical details: max. wheel diameter: 50 mm gear width: 20 mm max. module: 4 mm Isdpfx Ajxxl Sgedioa min. module: 0,1 mm total power requirement: 12,5 kW weight of the machine ca.: 4000 kg dimensions of the machine ca.: 2,2 x 2,5 x 2,3 m workpiece length - max.: 300 mm

Condition: good (used), Year of construction: 1998, spindle diameter 90 mm Iedoxyadtspfx Adiea control Siemens SINUMERIK 840 C voltage 400 V stroke position adjustment 100 mm table hole 150 mm no. of strokes 100-1200 Hub/min weight of the machine ca. 8,0 t Key data Normal module: 6 mm Max. workpiece pitch circle diameter: 250 mm Max. tooth width (straight teeth): 60 mm Helix angle adjustment: 45° to +0.5° Axis angle: 0° to 90° Center distance workpiece/jigging spindle: –80 mm to +320 mm Stroke position, stroke length Max. stroke position range (depending on stroke length): 0 mm to 80 mm Stroke position adjustment range: 0 mm to 80 mm Stroke drive Stroke rates infinitely variable Standard: 100 to 1200 DH/min Motor for stroke drive: 9 kW Maximum cutting speed: 150 m/min Feeds Rotation axes (tool C1, workpiece C2 axis): Feed stepless relative to 100 mm pitch circle diameter: 1.0 to 9420 mm/min Radial axis (column slide X1 axis): Feed continuously variable: 1.0 to 9420 mm/min, rapid traverse corresponds to maximum feed rates Connected load / weight Total connected load: 26 kVA Total weight (standard version): approx. 9,000 kg

Condition: good (used), Year of construction: 2004, Ref. -No.: 10612 Manufacturer: LIEBHERR Type: LC 3002 Year of construction: 2004 Type of control: CNC Control: LIEBHERR Storage location: Halberstadt Country of origin: Germany Serial no.: 30XX Max. Module: 30 mm Min. Module: 4 mm Max. Workpiece Diameter: 3000 mm ambient temperature: +15...+38 ° cutting speed: 25 - 250 m / min Milling head swivel angle: 0,001 ° Resolution accuracy: 0,1 Degree Workpiece table load: 300 kN Operating voltage: 400 V control voltage: 24 V frequency: 50 Hz Max. rated current: 230 A Fuse in the supply line: 250 A Ijdpoxxpdgsfx Adisa Max. milling diameter spur gears/helical gears: 3.000 mm Further information: Suitable for internal and external gear cutting. The machine can be viewed by appointment.

Condition: good (used), Year of construction: 2008, Gear grinding machines Reishauer RZ303 Isdpoxz E S Eefx Adioa

Condition: good (used), Year of construction: 1986, functionality: fully functional, I have two identical LORENZ LS 304 CNC gear shaping machines for sale. Isdpfxoxyuy No Adisa Both machines were manufactured in 1986; one is blue and one is green. Both machines are equipped with a BWO CNC 900 control system. Each machine has a weight of approximately 8.3 t. The machines originate from the ZF special production division. Over the past twenty years, the machines have been regularly modernized. Upgrades include, among other things, hydraulic hoses, components within the control cabinet, various drive motors, as well as the installation of relatively recent ELBATRON extraction systems compliant with German production and safety standards. The machines have been continuously serviced and are in excellent technical condition. Technical Specifications: - Maximum cutter diameter (shaping wheel): 300 mm - Maximum workpiece diameter: 400 mm - Maximum module: 6 - Minimum module: n/a - Gear width: n/a - Table diameter: n/a - Table bore: n/a - Strokes min/max shaping/skiving: n/a - Total connected load: 11 kW - Machine dimensions: n/a - Control system: CNC - CNC manufacturer and type: BWO CNC 900 Both machines are in excellent condition. They run smoothly, precisely, and reliably, and are ready for immediate use.

Condition: excellent (used), Zwick/Roell Zwick/Roell 1456 RetroLine Universal Testing Machine 20 kN For sale is a high-quality universal testing machine from the renowned manufacturer ZwickRoell, model 1456 RetroLine, year 2023, with a nominal force of 20 kN. The machine was completely upgraded to state-of-the-art technology as part of the RetroLine modernization and is ready for immediate use. The machine is in very good condition, has been modernized, and complies with all current standards. It is ideally suited for tensile, compression, bending, and shear tests in research, development, and quality assurance. Technical data: Make: ZwickRoell Model: 1456 RetroLine Year of manufacture: 2023 Nominal force: 20 kN Test space dimensions: Height 900 mm, Width 420 mm Drive: Electromechanical spindle drive Speed range: 0.001 – 1000 mm/min (depending on model) Measurement accuracy: ± 1% according to ISO 7500-1, Class 1 (optionally 0.5) Control system: testControl II Software: testXpert III Ijdpfx Adsw U N Rtjisa Equipment: Replacement head Cabinet (protective / soundproofing) Evaluation unit included For the ZwickRoell 1456 RetroLine with 20 kN, the approximate values (depending on configuration and equipment, e.g., cabinet, evaluation unit) are as follows: Dimensions Overall height: approx. 1.8 – 2.0 m Width: approx. 600 – 800 mm Depth: approx. 600 – 800 mm Test space (installation height/width): 900 mm × 420 mm Weight: Base machine: approx. 250 – 350 kg With cabinet and evaluation unit: up to approx. 400 – 450 kg Condition: used Scope of delivery: (see picture) - Zwick/Roell 1456 RetroLine testing machine (20 kN) - Protective / soundproofing cabinet - Interface card for force transducer - Operating and technical documentation (PDF & printed) Inspection by arrangement possible. Shipping or collection by arrangement. (Specifications and technical data subject to change and errors excepted!) Further questions can be answered by phone.

Year of construction: 2015, condition: excellent (used), Polygon and surface machining, gear and spline shaft machining, gear tooth pointing, shift stop machining, chamfering and deburring, SCUDDING See document Isdpoxupg Tefx Adija

Condition: used, Year of construction: 2012, max. wheel diameter 300 mm gear width 320 mm max. module 10 min. module 0,5 ical angle 45 ° frequency 50 Hz voltage 400 V main fuse 125 A x-axis 270 mm y-axis 250 mm z-axis 320 mm A - axis +/- 45 ° B - axis 360 ° C-axis 360 ° total power requirement 89 kW weight of the machine ca. 23,5 t dimensions of the machine ca. 11,2 x 5,5 x 2,9 m automated Oil slinger station EWAB workpiece storage Hoffmann coolant filter system HSF 100 SE/K Minimax fire extinguishing system W+W air filter system Iedpfx Adovxwtgeisa Promot Automation "Cellmaster" (3 cells) year 2019

Condition: ready for operation (used), Year of construction: 1986, Offered is a tensile testing machine year 1986 including hydraulic clamping jaws, load cell: PM 630 Rn, measuring-control unit: Doli EDC 580, nominal load: 600kN, clamping head distance: 150mm-650mm, piston stroke: 500mm, spare clamping head, machine dimensions X/Y/Z: 850mm/600mm/3200mm, machine weight: approx. 3500kg, calibrated annually. Inspection is possible by arrangement. Iedpfxjxz Ewze Adiea

Condition: used, Year of construction: 2005, Reishauer RZ150 gear grinding machine Isdpsxz E Srefx Adioa

Condition: good (used), Year of construction: 1992, functionality: fully functional, Technical Data – Lorenz LS 180 CNC External gear cutting – max. outside diameter: 280 mm Internal gear cutting – max. inside diameter: 100 mm + cutter diameter Max. workpiece outside diameter: 420 mm Ijdpfsxyatusx Adija Max. module: 5 Max. stroke length: 60 mm Stroke rate (stepless): 250 – 1250 strokes/min Machine weight: approx. 7,500 kg Machine dimensions (L × W × H): approx. 4,500 × 2,500 × 2,700 mm Additional Information Year of manufacture: 1992 Condition: good, well maintained Operational status: fully functional, ready for operation Location: Turkey Availability: immediately Inspection: test under power and inspection on site possible at any time by appointment

Condition: used, Zwick/Roell Materials Testing Machine BTC-FR100SW.A4K with MAYTEC High-Temperature Furnace HTO-09/2 1200°C-SG and Load Cell TC-LC100KN.G02 (100 kN) The testXpert III 1.6 software serves as control and evaluation software for ZwickRoell materials testing machines. It enables standardized test procedures, logs measurement data, and supports traceability, among other features. Windows 11 Compatibility: ZwickRoell’s testing software (especially testXpert III) supports current Windows platforms, allowing use with Windows 11. Product Description: For sale is a high-quality materials testing system, consisting of: - Zwick/Roell Materials Testing Machine BTC-FR100SW.A4K - MAYTEC High-Temperature Furnace HTO-09/2 1200°C-SG - Load Cell TC-LC100KN.G02 (100 kN) The system comes from laboratory usage and was employed for mechanical materials testing at ambient and high temperatures. All devices are used, well-maintained, and fully functional. Technical Highlights – Zwick/Roell Testing Machine Type: BTC-FR100SW.A4K Maximum test force: 100 kN AC drive 4 kW, widened stand design (W) Supply: 400 V / 50–60 Hz / 3Ph+N+PE, power consumption 9 A Working area: Height 1,765 mm, Width 1,030 mm Crosshead speed: 0.0005 – 1000 mm/min Positioning accuracy: < 2 µm Noise level: ≤ 70 dB(A) Test force range: 0.4–100% (Class 1) / 2–100% (Class 0.5) according to ISO 7500/1 Power requirement: 5.0 kVA Load frame height: approx. 2.32 m Machine weight: approx. 1,820 kg Load Cell: TC-LC100KN.G02 (IP67, GTM, 100 kN, 20 kg) Technical Highlights – MAYTEC High-Temperature Furnace Maximum temperature: 1200 °C 2 separately controllable heating zones Power: 0.66 kW / 22 A per zone Supply: 30 V / 50 Hz per zone Ideal for high-temperature testing in combination with the Zwick testing machine Load Cell TC-LC100KN.G02 Iodpfoxt Hn Ssx Adija Nominal force: 100 kN Protection rating: IP67 Precise force measurement to ISO 7500/1 Weight: 20 kg, GTM design Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see pictures) Zwick/Roell Materials Testing Machine BTC-FR100SW.A4K MAYTEC High-Temperature Furnace HTO-09/2 1200°C-SG Load Cell TC-LC100KN.G02 (100 kN) Connection cables and mounting accessories (if available) (Specifications and technical data may be subject to change and errors.) Further questions can be answered by phone.

Condition: used, Year of construction: 2002, crown gear diamter max. 500 mm distance crown gear spindle - front pinion spindle 150 - 350 mm distance pinion spindle - front crown gear spindle 120 - 340 mm Ijdpfx Asvxwpujdija control GE FANUC Series 160i-M 70 mm pinion turning speeds max. 0 - 3.000 mm crown gear turning speeds max. 0 - 2.600 U/min inner taper pinion spindle Ø 99,2 mm inner tape crown gear spindle Ø 99,2 mm rated current 30 A weight of the machine ca. 6,40 t dimensions of the machine ca. 2,40 x 2,20 x 2,10 m Own lapping system included Was also operated at a lapping center

Condition: excellent (used), Haida Type: HD-B604-S Sensor: TECSIS load cell Max. Capacity: 2T / 20 kN Unit: G, kg, N, LB (adjustable) Resolution: 1/250,000 Accuracy: ± 0.5% Max. Stroke: 700 mm (without fixture) Test speed: 0.1-500mm/min (adjustable) Voltage: 220V AC ± 10%, 50/60Hz Clamping jaws: 0-7 mm Weight: approx. 175 kg Dimensions (WxDxH): 88 x 50.5 x 150 cm Condition: used Scope of delivery: (see picture) Ijdpfx Ador Ixq Roija (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, Year of construction: 2008, ratio of transmission 10:1 min. number of teeth 3 max. number of teeth 200 range of tooth size 20 mm tooth width max. 58 mm spindle speeds (infinitely variable) 6000 U/min work piece spindle speed 1200 U/min diameter of tools max. 230 mm diameter of tools min 69,85 mm x-axis 325 mm y-axis 350 mm z-axis 470 mm b-axis + 90,1 / - 1 ° work piece table - Ø 212,71 mm Control SIN 840 D SIEMENS total power requirement 75 kW Ijdpfjvxwmtox Adisa weight of the machine ca. 10.000 Kg dimensions of the machine ca. 6,10 x 4,40 x 3,30 m Internal probe Renishaw LP2 (axis X2;Y2) Hoffmann coolant filter system HSF 100SE/K (built in 2008) Tank capacity 2500L VT oil mist filter system

Condition: used, SincoTec Type: Exciting Mot Resonance test bench POWER SWINGLY 20 kN The resonance test bench POWER SWINGLY BigTable is designed as a two-mass oscillator. It consists of an oscillating head excited by a frequency-controlled asynchronous motor using an unbalance motor, which is arranged in the upper part of the machine and generates the dynamic amplitude. The oscillating head is supported by pre-tensioned helical compression springs on the upper crossbeam and is guided centrally. The medium-load drive is arranged in the lower part of the machine and applies the static preload with the help of a gear motor via a spindle drive. The sample space is located above the clamping table and is limited at the top by the adjustable crossbeam. The test bench is controlled by the EXCITING MOT control system. The complete control electronics for the control system are housed in an industrial PC cabinet. The control cabinet is made of powder-coated sheet steel and meets protection class IP 50 according to EN 60529. Technical data: General data test bench: Total height of test bench 1840 to 2240 mm Height of machine table 1030 mm Width of test bench 800 mm Depth of test bench 1500 mm Height of sample chamber max. 600 mm (without force transducer) Free column passage 550 mm Maximum force amplitude 10000 N Maximum total force ±20000 N Maximum vibration path ±5 mm Test frequency 30 to 110 Hz Accuracy of the measuring sensors min. Class 1 (according to DIN EN 10002-3) Weight of test bench approx. 1880 kg Max. weight of clamping device 150 kg General data Control cabinet: Total height of control cabinet 1900 mm Height of table top 1080 mm Width of control cabinet 650 mm Depth of control cabinet 700 mm Weight of control cabinet 152 kg Color RAI 9006 (white aluminum), table top midnight Conditions for the installation location: Space requirement 2.5 x 2.5 m Iedpfx Adovx Su Seiea Required ceiling height 2.8 m Floor load capacity 170 N/cm² Power supply 400 V / 50 Hz (clockwise rotating field) Connection plug CEE socket, 2-pole, 16 A Fuse 16 A Connection and ambient conditions Mains conditions: Voltage 400 V rotating current with ΜΡ conductor and protective earth, clockwise rotating field Voltage fluctuations < ± 10% Short-term dips < 20 ms Limits for continuous interference Radio interference level A according to VDE0871 Frequency 50 Ηz ± 1% Protective earth Earthing resistance < 0.3 Ω Model: POWER SWINGLY MOT Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Zwick/Roell Zwick/Roell ProLine Universal Testing Machine Z010 TN – 10 kN Type: BT1-FB010TN.D30 Ijdpfxjw Uifdj Adisa For sale is a high-quality materials testing machine, model Zwick/Roell Z010 TN ProLine (BT1FB010TN.D30), supplied with comprehensive equipment. This system is ideally suited for tensile, compression, bending, and component tests and is offered with original Zwick software, accessories, and safety screen. Complete system Including safety screen (CE-compliant, with electric interlock) Comprehensive accessories and software included Technical data of the testing machine: Model: Z010 TN ProLine, nominal force 10 kN Test area (W x H): 440 x 1050 mm Testing speed: 0.001 – 1000 mm/min, continuous up to nominal force High-precision guidance, very low noise emission High-resolution, maintenance-free DC motor Electrical connection adjustable in 6 voltage ranges Including interface card for force transducer (additional slot available for expansions) Expandable with options and modules Safety – Safety screen (included in delivery): Suitable for ProLine Z005TN, Z010TN, Z020TN With electric interlock and additional manual locking Makrolon pane, 6 mm thick, pivoting (hinged left) CE-compliant Mandatory for applications with risk of operator injury Force transducer: Xforce HP force transducer, nominal force 10 kN Accuracy class: 1 from 20 N, 0.5 from 100 N (according to ISO 7500-1) Extremely good linearity (

Condition: used, Zwick Type: Z30 Technical Specifications: Total Height 2114 mm Width 748 mm Depth 580 mm Fmax: 20 kN Vmax: 125 mm/s Accessories: Clip-On Extensometer 13.5 mm Clip-On Extensometer 40 mm Computer + Software testXpert II V3.5 Condition: Used Total Weight Approx. 500 g Scope of Delivery: (See Image) (Subject to change and errors in the technical specifications, information is subject to change!) We are happy to answer any further questions over the phone. Written orders can be placed by email or fax. Ijdpjv Rn Ifsfx Adioa