Used Genome Sequencer for sale (428)

Condition: used, Multifunction Safety Tester KT 1880B Multifunctional Safety Tester KT 1880B – Test Automation in 6 U The KT 1880B is a compact safety tester in a 19" rack-mount format (5 U) and combines all relevant test types in one device: high-voltage testing (AC/DC), protective conductor testing, insulation testing, touch current testing, functional testing, and continuity testing. This enables the KT 1880B to meet the requirements for efficient, safe, and standards-compliant safety testing according to IEC, EN, UL, VDE, and other international standards – ideal for final testing, production, and quality assurance. Technical Performance Data - AC High-Voltage Test: 100 - 5,500 V / 0 - 3 mA - DC High-Voltage Test: 100 - 6,000 V / 0 - 10 mA - DC Insulation Measurement: 100 - 6,000 V / 250 kΩ - 1 GΩ - AC Protective Conductor Test: 10 - 30 A / 0 - 400 mΩ - AC Touch Current Test: 100 - 270 V / 0 - 10 mA - DC Continuity Test: 24 V / 0 - 600 mA Bjdpozwlfwjfx Aiwjww - Function Test / Current Consumption AC: 4 A (Option: 1 A, 10 A, or 16 A) - Wide-Range Power Supply: 90 to 253 V / 50 Hz / 60 Hz Test Automation & Ease of Use Thanks to the integrated 4.3" TFT color display with intuitive menu navigation and freely configurable test programs, the KT 1880B enables a fully automated test sequence. The device under test only needs to be connected once – no re-wiring is required. This significantly reduces test times and potential sources of error, making it a clear advantage, especially in automated production environments. Standards Compliance & Operational Safety With a short-circuit current of 3 mA AC / 10 mA DC, the KT 1880B meets the requirements of EN 50191 for current-limited devices. As a result, it can also be operated by non-specialist personnel – ideal for companies with mixed testing staff structures. Fully Electronic High-Voltage Generator The integrated digital high-voltage generator ensures high accuracy and stable test results – even with demanding test cycles and under production conditions. Typical Application Areas - Series production & final testing - Type testing according to international safety standards - Production of electrical devices, components & modules - Automated testing environments & test benches Flexibility, Safety & Automation Combined The KT 1880B is the ideal solution for safety testing in industrial environments. With six integrated test types, fully electronic high-voltage technology, intuitive operation, and current-limited design, it meets all the requirements for modern test automation. Safety Tester KT 1880B Year of Manufacture: 2025 Manufacturer's Price: €6,545.00 (including VAT) Calibration: March 6, 2025 Remaining warranty available Accessories A3/1800-K Connection and Control Panel + CEE16 Manufacturer's Price: €1,318.00 (including VAT) Knürr TW 05 Mobile Device Cart, pre-assembled with: HL 02 Holder for High-Voltage Test Probes SP 02 / SP 03 HL 81 Holder for Protective Conductor Test Probe PE 81-i KH 01 Cable Holder Manufacturer's Price incl. Accessories: €3,300.00 (including VAT) Test Probe SP02 + SP03 Manufacturer's Price: €521.00 (including VAT) Protective Conductor Test Probe PE 81-i Manufacturer's Price: €311.00 (including VAT) SPS D 2012 Test Dummy Manufacturer's Price: €711.00 (including VAT) Rack-Mount Housing EH 1905-y Manufacturer's Price: €653.00 (including VAT) Warning Light Set with LED WL25 Manufacturer's Price: €327.00 (including VAT) "Everything from one source: We are happy to offer you a suitable ba

Condition: used, Year of construction: 2022, PANEL SAW WITH TILTING SAW BLADE Linvincibile SI 5 KEY FEATURES SLIDING TABLE: GUARANTEED SUPERIOR CUTTING QUALITY OVER THE LONG TERM TELESCOPIC ARM: AN “UNBEATABLE” SMOOTH MOVEMENT SAW UNIT: FOR A PERFECT CUT Technical Data SI 5 Main saw blade diameter (mm): 550 Cutting capacity with extendable fence - with table 3200 mm - with table 3800 mm 3200x3200 3800x3200 Saw blade tilt (degrees): 46 Max. cutting height at 90° (mm): 200 Max. cutting height at 45° (mm): 130 Saw blade speed (rpm): 2500-3500-5000 Scoring blade speed (rpm): 8500 - Extractor port diameter: - on frame - on blade guard 120 100 Main motor power [S6 -40%] Hz50 kW: 7 Scoring motor power [S6 -40%] Hz50 kW: 0.9 Cutting width at rip fence (mm): 1600 Standard equipment and accessories - Optimizer/Process control app for tablets: SCM Thundercut. The app can be downloaded from the App Store or Play Store for tablets compatible with iPadOS or Android. It can be activated via the QR code supplied with the machine. The app enables: * Management of machine fleet and material/panel storage * Creation and editing of projects, importing projects from main furniture design software (file format "cpout"), importing cutting lists * Optimization of cutting lists by selecting one or more proposals from the optimization software integrated into the app * Correct machine settings for each cut, thanks to the simple and intuitive graphics of the 3D sequencer, guiding the operator step by step * Printing barcode labels to identify the various parts, via Bluetooth connection with compatible label printers. - 10-year warranty on the sliding table guide system - Sliding carriage entirely made of aluminum structure with guidance on crimped, hardened and arc-ground steel rails with large contact area - Max. saw blade diameter* up to 450mm with scoring blade mounted* up to 550mm without scoring blade - eye-S 15" electronic control including: * 15" touchscreen monitor * Direct control of the following working axes with manual, semi-automatic, automatic, and incremental modes: - Height adjustment of the main saw blade - Tilt adjustment of the saw unit - Rip fence adjustment - Height and lateral adjustment of the scorer (the scorer is automatically raised to the set position on activation and lowered on deactivation) * Operator assistance functions for complex cuts * Ability to store up to 1000 programs with associated image * Ability to store up to 1000 different tools with associated image * Cutting process management of preloaded parametric machining programs * Environment for creating and storing new sequenced working programs * Automatic import of working dimensions from Thundercut app * USB port * Ready for network connection - Auxiliary function of the electronic control, including: * Determination of correct fence position on rip fence for format processing with tilted saw blade * Determination of correct fence position on rip fence for angle cuts with mitre fence on the work table with or without tilted saw blade - Pivoting control panel above the table - Scoring unit with independent Bwsdpsz Hb Nbofx Aiwew

Condition: used, Year of construction: 2021, - Working width 1,350 mm - Belt feed speed 2 to 16 m/min - PRO SAND electronic control Automatically Calibrating Sanding Machine Manufacturer: SCM Type: DMC system Year of manufacture: 2021 Technical data - Working width 1,350 mm - Belt feed speed 2 to 16 m/min - PRO SAND electronic control - PLC terminal with 10.4" LCD color display Unit 1 TIE 5000 working unit for additional table, internal cross-padding - Sequencing system of the unit for belt change by only one machine operator - Automatic brake - Linear blower with timed activation for belt cleaning - Belt dimensions: 150 x 5,000 mm - Chevron belt dimensions: 140 x 4,710 mm PE16T EPICS electronic sector sanding, pitch 16 mm - 16 mm distance between sectors from center to center - Double-acting pneumatic cylinders with adjustable feed/counter feed - Graphite cloth with quick extraction device - Complete management of functions via the electronic Pro Sand control - Motor with inverter power up to 15 kW Unit 2 DO19 orbital unit for 19 rotating disc brushes - Manual adjustment of the unit's working position - 1.1 kW main motor with inverter drive - Independent motor for controlling the orbital movement - Diameter of the rotating disc: 125 mm FT/19/125 Set with 19 rotating discs, diameter 125 mm Unit 3 BF300 working unit for brush roller, diameter 300 mm - Manual adjustment of the roller's working position - 4 kW main motor with inverter drive FT 300 brush roller, diameter 300 mm Unit 4 BF300 working unit for brush roller, diameter 300 mm - Manual adjustment of the roller's working position - 4 kW main motor with inverter drive FT 300 brush roller, diameter 300 mm Bwsdpfxozuzbcs Aiwew Unit 5 SC 2620 working unit for super finish pad - Rotation of the belt in the opposite direction of the conveyor belt - Electronic belt swiveling control - Disc brake - Chevron belt dimensions: 1,370 x 2,186 mm - Belt dimensions: 1,370 x 2,620 mm PE16/C EPICS electronic sanding block with sector pitch 16 mm - 16 mm distance between sectors from center to center - Double-acting pneumatic cylinders with adjustable feed/counter feed - Graphite cloth with quick extraction device - Complete management of functions via the electronic Pro Sand control - Inverter motor with a power of up to 15 kW Inverter-controlled vacuum motor integrated into the machine frame, up to 7.5 kW - Rubber-coated conveyor belt, 50 Shore - 4 kW conveyor belt motor with inverter drive Console with integrated PC eye-M and electronic Maestro Pro Sand control with tele service system Device connected to the machine that enables the use of the Maestro Pro Sand software. The integrated LED light strip enables the operator to monitor the machine's status in real time (emergency, operation, etc.) without having to be near the machine itself. It is equipped with a fanless industrial PC with protection class IP53 (IP65 on the front). This robust solution guarantees the highest level of resistance even under the most adverse environmental conditions that an industrial site can offer. The 21.5" LCD color display with a large 16/9 touchscreen enables particularly easy and efficient control of the machine's most important functions: - Full HD display resolution 1920x1080 - LED backlight - Capacitive

Condition: used, Year of construction: 2019, pressure 60.0 t chamfer lenght 1270 mm distance between columns 1000 mm column arm 410 mm ram stroke speed 160 mm/sec work speed 10.0 mm/sec return speed 165 mm/sec work stroke 275 mm dayligth 530 mm table height 900 mm table width 90.0 mm back stop - adjustable 500 mm control DA 66T oil volume 150 ltr. voltage 380 V engine output 7.5 kW Weight 4320 kg range L-W-H 2250 x 1960 x 2750 mm current new price approx. 65.000 euros very rarely used! Special price on request - in checked condition - machine video - ?v=KRifrqTgkVU ----- SPEED BEND PRO CNC press brake: * increased installation height * increased cylinder stroke * and increased bending beam speeds ----- Equipment: - CNC electro-hydraulic press brake - DELEM CNC control model "DA-66T" graphics/touchscreen * 2D graphic touchscreen programming mode * 3D representation in simulation and production * 17" color TFT screen with high resolution * Bending sequence calculation * Product programming and representation in actual size * USB interface - CNC controlled axes: Y1 - Y2 - X - R - CNC electro-motorized back stop (X axis) * on ball screws * Travel path .. 500 mm * Travel speed .. 500 mm/s * with 2x manually adjustable stop fingers - CNC electro-motor height adjustment (R axis) * Travel path .. 250 mm Bwodpfx Aiezlulpewjw * Travel speed .. 350 mm/s - AMADA/PROMECAM upper tool holder * including clamping jaws with upper wedge camber * 1x ROLLERI split set 60° upper tool - AMADA/PROMECAM lower tool holder * including 1x die shoe "C 1050-R" * 1x AMADA 1-V die 85° - Safety device at the rear (door including safety switch) - BOSCH/HOERBIGER hydraulic components - SIEMENS electrical components - FIESSLER AKAS laser protection device in front of the machine - 2x front support arms with SLIDING system (HIWIN plain bearings) - 1x freely movable double foot control - CE mark / Declaration of conformity - Operating instructions including circuit and hydraulic diagram

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2019, Nortec Type 817 – 2000 Stationary Pallet Turner Bodpfxjzp Nw Uo Aiwjww Technical Data: Pallet size up to 1,200 x 800 mm Loading height 600 to 2,000 mm Load capacity up to 800 kp – tilting angle selectable 90° and 120° – Hydraulic drive for all operations – Duration for one repalletizing process: 90…120 seconds – Control system: electronic – Program sequence: automatic or in individual steps – Operation via a push-button panel – Safety switch strip on the lifting table – Electrical modification in 2019 to B + R control system

Condition: used, Year of construction: 2016, Overview This Represa LAGUI 3.2 is an automatic rotary labeling machine for self-adhesive labels on cylindrical bottles, built in 2016 by the Spanish manufacturer Represa Construcciones Mecánicas. It has been used for wine bottling and is configured with three labeling heads for front label, back label and tax strip stamp on 75 cl and 150 cl wine bottles. The bottles are spaced by an infeed screw, transferred by starwheels onto rotating bottle plates and labeled in sequence by the three heads; each head is adjustable in height, angle and travel. Bottle height is set automatically from the touch panel, and up to 30 formats (bottle heights and label sets) can be stored and recalled for fast changeovers. Technical data - Manufacturer: Represa Construcciones Mecánicas - Model: LAGUI 3.2 - Year of manufacture: 2016 - Machine type: rotary self-adhesive labeler for cylindrical bottles - Labeling heads: 3 (front label, back label, tax strip stamp) - Output: up to 3,000 bottles per hour, adjustable - Bottle formats: 75 cl and 150 cl - Format memory: up to 30 formats - Power supply: 400 V - Compressed air: 2.5 bar minimum operating pressure - Construction: stainless steel frame with transparent safety guarding Equipment - Bottle infeed screw and transfer starwheels - Rotating bottle plates - 3 self-adhesive labeling heads with label detection sensors - Photoelectric bottle detection - Automatic height adjustment of the machine and the heads - Control panel with multifunction touch screen on a 180° swivel arm - Safety-interlocked doors and emergency stop - CE declaration and operating manual (Spanish) Condition Bwodpfxez Syvfj Aiwjw The machine is still installed and can be inspected on site by appointment. Availability Available immediately. Location: Spain.

Condition: excellent (used), LANG Embossing Station Macro-Grip 41200 2 units available, price per unit Please refer to the image sequence for the respective embossing station, identified by the internal number. ----- Condition of the item: The item comes from a company liquidation. Good used condition. Internal number: SK6, SK7 Bsdpfxs Adamyo Aiwoww

Condition: excellent (used), functionality: fully functional, Vollmer circular saw sharpening machine, completely overhauled in 2015. Bwodpe Afhixsfx Aiwew For circular saws with a diameter of up to 1250 mm. Switchable for alternating or straight grinding. Grinding wheel: 200 mm. 2 built-in, switchable tooth profiles. 3 switchable feed speeds. Automatic, adjustable compensation of the grinding wheel. Automatic sequence during sharpening. After the leveling operations, the machine switches off automatically.

Condition: used, Year of construction: 2014, x-travel 1740 mm y-travel 760 mm z-travel 660 mm Control PC-Fusion-640M spindle taper SK 40 spindle turning speed range 40 - 12.000 U/min spindle motor 30 kW distance spindle centre table top edge 180 - 840 mm table load 1400 Kg distance spindle center to column 830 mm rapid travel x/y/z 36 m/min table width 760 mm table length 2000 mm 5-T-slots - width x distance 18 x 125 mm table height over floor 825 mm tool change unit 30 tool changing time 4,7 sec wotkpiece diameter with 2 vacant positions 110 mm workpiece diameter at full load 80 mm max. tool weight 8 kg tool length - max. 350 mm air pressure - required 5 - 9 bar Air volume 140 l/min electrics - voltage/frequency 400 / 50 V/Hz coolant tank 360 l high-performance coolant system 15 bar total power requirement 22 kW weight of the machine ca. 11 t dimensions of the machine ca. 4,5 x 3,5 x 3,1 m Standard Equipment / Included Accessories - Through-Spindle High-Pressure Coolant System (15 bar) - Manual Pulse Generator (MPG) - Hinged Belt Chip Conveyor, Right-Hand Side Discharge - Torque-Controlled Chip Breaking Drilling Cycle - Performance Software Package Performance Software Package Includes - 600 User Variables - MAZAK Tornado Boring & Tapping Cycle (EIA/ISO) - Synchronous Tapping - EIA/ISO Program Input - Extended EIA/ISO Functions - G93 Inverse Time Feed - G37 Automatic Tool Length Measurement - Sequence Number Comparison Stop Function - G0 Inclination Constant - Additional Work Coordinate Systems (G54.1) - Thread Cutting Function General Machine Features Adaptive Feed Control (AFC) The Adaptive Feed Control system continuously monitors spindle motor load and feed axis servo load. If a significant deviation from the programmed load is detected, the feed rate is automatically adjusted to maintain optimum cutting conditions, improve productivity and protect the cutting tool. - MAZAK Standard Machine Colour Safety Equipment - Operator Safety Door with Interlock Switch - Fully Enclosed Splash Guard - Integrated Work Area Lighting - CE Conforming Machine Coolant System Through-Spindle Coolant (TSC) - Through-spindle coolant system - Pump pressure: 5 bar Complete coolant system including pumps, valves, piping and coolant nozzles for efficient machining and reliable chip evacuation. Bwjdpfx Aszz Afieiwow Measuring System Automatic Tool Length Measurement Automatic measurement of small-diameter tools without operator intervention. Chip Disposal Machine prepared for side-mounted chip conveyor CNC Control - MAZATROL PC Fusion CNC 640M - 10.4" Colour LCD Display - Relocation Detector MAZAK Tornado Boring & Tapping Cycle (MAZATROL) Helical interpolation allows boring and tapping operations over a wide range of diameters using a single tool, significantly reducing programming time and machining time while increasing flexibility. Background Tool Path Verification Tool paths can be verified in the background while another NC program is being executed in automatic mode. Machining Navigation – Prediction Prior to machining, the control predicts machining time, spindle load and other operating parameters, allowing programs to be optimized for maximum productivity. Machining Navigation – Monitoring Real-time display of machining conditions and machine loads with continuous feedback for process optimisation. Machining Navig...

Condition: ready for operation (used), Year of construction: 2019, operating hours: 600 h, number of axes: 2, Plasma cutting machine manufactured in 2019. This KOIKE PNC-12 Extreme features an effective cutting area of 1,500 x 3,000 mm and a maximum programmed cutting speed of 3,000 mm/min. It includes a robust downdraft cutting table and a Cebora plasma power source with a maximum cutting current of 110 A. If you are looking to get high-quality plasma cutting capabilities, consider the KOIKE PNC-12 Extreme machine we have for sale. Contact us for further details. • Operating hours: approx. 600 h • Condition: Excellent Bwsdez Dhqaspfx Aiwsw • Effective cutting area: 1,500 x 3,000 mm • Rapid travel speed: 4,000 mm/min • Maximum programmed cutting speed: 3,000 mm/min • Drive system: Rack-and-pinion X/Y with linear guides • Control unit: KOIKE D420, 7-inch colour display, USB and manual program input • Torch control features: Initial height sensing, arc-voltage height control, collision/breakaway protection • Plasma cutting performance: • Maximum cutting current: 110 A • Recommended mild-steel cutting capacity: up to 35 mm • Maximum cut: approx. 40 mm • Maximum severance: up to 50 mm • Mild-steel piercing capacity: up to 20 mm • Duty cycle: 90 A at 100% / 95 A at 60% / 110 A at 50% • Oxy-fuel cutting performance: • Mild-steel cutting capacity: up to 80 mm (depending on nozzle, gas type, material and cutting conditions) • CNC-controlled piercing sequence Additional equipment • Plasma power source: Cebora Plasma Sound PC 110/T (Art. 336) • Machine torch: Cebora automatic torch with approx. 10 m cable package • Oxy-fuel: Original KOIKE motorised oxy-fuel cutting torch; automatic gas solenoid valves • Downdraft cutting table: Sideros Engineering Sirion 1000 (2019), S/N 1027/19 • Max air pressure: 6 bar • Max table load: 500 kg/m² • Design: Sectional/zoned downdraft table with central extraction channel • Nesting/CAD-CAM software on USB drive • Available documentation and accessories

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, clamping force: 2,200 kN, screw diameter: 60 mm, clearance between the columns: 610 mm, displacement volume: 749 cm³, injection pressure: 1,690 bar, injection weight: 689 g, mold height (min.): 195 mm, ejector force: 77 N, ejector stroke: 160 mm, plate width: 865 mm, plate height: 825 mm, total length: 6,500 mm, total width: 1,800 mm, total height: 2,050 mm, overall weight: 7,900 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 157 A, warranty duration: 12 months, Equipment: documentation/manual, Base machine: UN220A5-IU1269 D=60 Servo-hydraulic Clamping force 220T Tie bar spacing 610x570 Tool mounting height 195 to 610 Robot interfaces Euromap 67, Euromap 18 Suitable 12kg linear robot available upon request Standard options, see brochure Optional features: CE standard 400 V / 3 phases / 50 Hz Oil preheating Ceramic heating PID control of the nozzle Bwsdpszz Rkaofx Aiwsw Maximum tool height increased by 100 mm Bimetallic screw and cylinder unit, version B Interface for conveyor belt Quick-change version of the plasticizing unit with Harting interface 3 hydraulic core pulls on the moving platen 2 air blow units, permanently mounted on the fixed platen Metering signal interface with HAN-3A connector Additional 220 V / 10 A Schuko socket 20-mA interface for mold temperature controller KEBA 2985 EU67 1 set of hydraulic sequence valve for needle closing Quick-change version of the plasticizing unit with Harting interface Socket package: 3 × 220 V / 16 A Schuko sockets 2 × 400 V / 16 A CEE sockets 1 × 400 V / 32 A CEE socket 6 freely programmable input/output signals Centering rings on both platens

Condition: used, Year of construction: 2016, machine/vehicle number: SO125, Used Blow Molding Machine Terekas up to 5L 1000 bph This used blow molding machine from Terekas, model FlexBlow 1, is designed for demanding PET bottle production, offering advanced flexibility and efficiency. With a maximum bottle capacity of up to 5 liters and a throughput of up to 1,000 bottles per hour, the system is engineered for operations that require consistent product quality across multiple neck finishes and formats. The FlexBlow 1 utilizes a linear blow molding architecture, equipped with a single cavity, making it ideal for short production runs, frequent changeovers, or pilot lines. It integrates seamlessly into existing filling and packaging lines, thanks to its modular design and compatibility with multiple container types. The preform feed system includes a tipper, unscrambler, and loader, all designed to ensure reliable, jam-free supply of preforms into the production cycle. Bedpfx Ao Adyymsiweww The core of the process begins with a robust preform heating tunnel, employing infrared (IR) lamps enclosed within a secure, ventilated housing. Preforms are conveyed through the heating zone by an articulated chain system, which ensures precise and uniform exposure to the heat source. The IR heating zone is shielded by a protective grid, preventing accidental contact while maintaining optimal thermal consistency across the preforms. The tunnel design avoids excessive hot spots or thermal degradation of the preform, contributing to higher end-product quality and reduced scrap rates. Precise Control and Reliable Operation After exiting the heating tunnel, preforms are transferred automatically into the blow molding station. The FlexBlow 1’s single-cavity blow unit utilizes high-efficiency pneumatic actuators and robust mold clamping mechanisms to produce containers up to 5 liters in volume. This configuration allows for rapid cycling and excellent pressure control throughout the stretch-blow sequence. The complete air handling system is engineered for reliability, with integrated air recovery to optimize compressed air consumption and reduce overall utility costs. Critical to the system’s operation is the dedicated chiller, which ensures mold cooling circuits remain within the required temperature range, guaranteeing consistent bottle wall thickness and minimizing cycle times. All pneumatic and hydraulic components are mounted in a well-organized auxiliary area, with clearly labeled connections for maintenance and diagnostics. Filtration and lubrication points are readily accessible, supporting a high level of system uptime and minimizing unscheduled stops. Machine operation and process parameters are managed through a touchscreen HMI panel installed directly on the electrical cabinet. This interface provides real-time control over all production settings, alarm management, and maintenance prompts. The entire machine is wired in a highly organized manner, with secured electrical panels, neatly routed cables, and clearly identified terminals for ease of troubleshooting. All safety guards and interlocks are present and functional, ensuring the operator’s safety while maintaining access...

Year of construction: 2018, condition: excellent (used), DYCOMETAL CRT2VT-180 Ice Water Immersion Chamber / Thermal Shock Test Chamber Manufacturer: DYCOMETAL Equipos Control Calidad, S.L. Type: CRT2VT-180 Year of manufacture: 2018 Machine type: Thermal shock test chamber / Ice water immersion chamber Test volume / model class: approx. 180 liters For sale is a used DYCOMETAL CRT2VT-180 thermal shock test chamber with a combined hot air / water bath testing system. The system is used to perform rapid thermal shock tests. The test specimen is placed on a pneumatically movable test specimen carrier (cradle), heated in the upper hot air zone, and then immersed in the lower, temperature-controlled water bath. The rapid change between the hot air zone and the water bath subjects components, assemblies, and materials to significant thermal stress. The change can be carried out manually or via a programmed sequence; the immersion depth is adjustable. Technical data: Model: CRT2VT-180 Year of manufacture: 2018 Protection class: IP22 Temperature range: 0 °C to +200 °C Testing system: Hot air / water bath system Upper zone: Hot air testing area Lower zone: Temperature-controlled water / immersion bath Bjdpjzzbwwsfx Aiwsww Test specimen carrier: Pneumatic cradle Max. controlled travel: approx. 500 mm Operating modes: Manual / Automatic Water bath / cooling system: Temperature-controlled immersion bath Automatic water level monitoring Water inlet / water outlet Integrated water circuit with circulation pump Refrigerant: R134a / 3.4 kg GWP: 1,430 CO₂ equivalent: 4.86 t Electrical data: Mains connection: 400 V / 3N~PE / 50 Hz Connected load: 5.32 kW Current consumption: 11.51 A Control / equipment: EUROTHERM 2604 program controller Manual / automatic test operation PLC control Ethernet communication Anybus Modbus gateway Eaton easy controller EUROTHERM iTools software Pneumatic test specimen carrier / cradle Adjustable immersion depth Stainless steel interior Circulation fans Observation window / test chamber lighting Emergency stop / alarm and safety system Documentation and software as shown in the pictures Application areas: Thermal shock and ice water immersion testing Thermal cyclic stress Electronics and automotive components Sensors and control units Material and component testing Quality assurance / research and development Reliability testing Dimensions / transport data: Internal dimensions (L × W × H): approx. 650 × 650 × 450 mm External dimensions (L × W × H): approx. 1,800 × 1,250 × 2,320 mm Additional height of pneumatic lifting cylinder: approx. 1,500 mm Total height including lifting cylinder: approx. 3,820 mm Weight: approx. 810 kg Transport by freight forwarder Condition / scope of delivery: Used – Year of manufacture 2018 Optical condition as shown in the pictures. DYCOMETAL CRT2VT-180 EUROTHERM 2604 controller Software and documentation as shown in the pictures Accessories as shown in the pictures Availability: by arrangement. Scope of delivery as shown in the pictures. Subject to change, errors and prior sale.

Condition: used, Year of construction: 2013, machine/vehicle number: MBI17, Used Casepacking Monoblock ITAL PAL 1650 bph The Used Casepacking Monoblock ITAL PAL 1650 bph is a packaging system that consists of three independent units that operate in sequence to ensure an efficient and continuous process. Consequently, it enhances production flow while minimizing bottlenecks. The machines that make up the Used Casepacking Monoblock ITAL PAL 1650 bph were manufactured by ITAL PAL in 2013. Notably, the system’s design focuses on efficiency, durability, and flexibility. The monoblock consists of a FCN70 case erector (Case Erector), a PK300 T1 case packer (Case Packer), and a CSN70 case sealer (Case Sealer), which allow for high flexibility in packaging management. Additionally, these three units operate in sequence to ensure an efficient and continuous process. As a result, the monoblock seamlessly integrates into various production lines. Bwjdpfx Aij Adywfjwow Structure and Components The FCN70 Case Erector automatically opens boxes from flat blanks, ensuring precision in folding and maximum stability. Furthermore, the process automates the handling of materials and supports a straight entrance for optimal integration with the subsequent packaging stages. The PK300 T1 Case Packer is the central element of the system and performs the packing function by inserting products into the cartons with precision. Moreover, this model operates at a production capacity of 1650 bottles per hour (bph), thereby optimizing cycle times and reducing material waste. Similarly, its robust structure ensures long-term performance with minimal maintenance. Finally, the CSN70 Case Sealer completes the process by applying an adhesive tape closure, thus ensuring packaging integrity and product security during transport and storage. Additionally, the sealing system allows for consistent adhesion, reducing the risk of package failure. Technical Features The Used Casepacking Monoblock ITAL PAL 1650 bph features 24 electrical sockets for connecting the different units and controlling and integrating peripheral equipment, such as external conveyor belts, sensors for quality control, barcode scanners, and communication interfaces for seamless connectivity with other machines in the production line. In particular, these additional systems help maintain process accuracy. Furthermore, its modular configuration allows for separate maintenance of the machines, thereby reducing system downtime. The integrated safety features ensure compliance with industrial standards, with protection systems and interlocks that prevent accidents during operation. Likewise, the user interface is designed for intuitive management by technical personnel, while control panels allow the adjustment of processing parameters in real-time. Consequently, the machine offers a balance between automation and operator control. System Operation The process begins with feeding the blanks into the FCN70 (Case Erector), which performs the opening and forming of the cartons using suction systems and pneumatic pistons. At the same time, the system monitors precision to prevent misalignment. The carton...

Condition: good (used), Year of construction: 2010, sheet width 2020 mm plate thickness 3.0 mm thickness at "Niro-steel" 2.0 mm bending angle max. 135 ° stroke of upper beam 250 mm Swing beam adjustment 80.0 mm Control POS 2000 back stop - adjustable ca. 1.000 mm Bsdpfxoz Icy Ro Aiweww total power requirement 6.0 kW weight of the machine ca. 3775 kg dimensions of the machine ca. 3850 x 2250 x 2250 mm Original price at the time: approx. 70.000 Machine from a maintenance workshop Special price upon request (!) Features: - Robust, electric-motor-driven CNC swivel bending machine - dynamic, high-performance drive motors - SCHRÃ?DER "POS 200" CNC control unit * touchscreen control panel * fast programming of individual parts * programming of bending sequences * Tool and bending program library * Graphical and numerical display - Swiveling control panel, front right - CNC electric-motor-driven material/backgauge * With rear sheet metal support surface (stainless steel) - CNC electric-motor-driven lower rail adjustment - 1x freely movable dual foot switch - Bending/insert tools * 1x upper cutting rail * 1x lower bending rail -- 10 mm * 1x lower bending rail -- 25 mm - User manual (PDF)

Condition: used, mileage: 87,906 km, first registration: 06/2025, Equipment: had accident, Engine: 13L, 510 hp / 375 kW with turbo compoundcharger, 2,856 Nm, Euro 6 with SCR, Transmission: AT2812F, 12-speed I-Shift, Engine brake: VEB+ with compact retarder, Wheelbase: 3800mm, Axle ratio: 2.31:1, Long/extra-high safety cab: Globetrotter XL, Parabolic suspension front, 2-leaf (normal hardness), Front axle load: 7.5t, Rear axle load: 13t, Stabilizer rear: normal, Three ride heights for air suspension, Disc brakes, EBS, ABS, ESP, Adaptive cruise control (ACC) with collision warning and emergency braking function, Emergency braking assistant: not deactivatable, Lane keeping assistant: deactivatable, Side collision avoidance and turning assistant (on both sides), Driver warning system, 8 speakers, Radio AM/FM and DAB/DAB+, Rear view monitoring/camera, Battery box at the rear overhang, 1 folding chock, Spoiler kit on the cab, Roof spoiler, Side spoilers, Battery box in the rear overhang, Two aluminum tanks (900l left, 710 mm high with steps in the side paneling and 405l right, 710 mm high, 1030 mm long), 900l AdBlue tank right, LED taillights, Brake lights with emergency braking flashing sequence, Tires front: 315/70R22.5, Tires rear: 315/70R22.5, No jack, Without spare wheel, Fuel package for long-distance transport I-See with map-based topographic information (high resolution), Cruise control with ECO function, Air deflector/spoiler kit, Edge extension, Folding, removable side panel, Roof spoiler, Side under-run protection, Foldable and removable, Driver comfort package: heated and electrically adjustable exterior mirrors, Wide-angle mirrors on both sides, Ramp mirror on the passenger side, Sun visor outside, Air conditioning with automatic temperature control and sun sensor, Two armrests on the driver's seat, Roof window and emergency exit manual, Media/infotainment system with navigation, Second driver information display, 9-inch touch color display, Load/axle load display in the vehicle display, Light package Plus, Rain sensor, LED headlights with automatic beam leveling, Headlight cleaning system, Static cornering lights, Automatic light switch, Electric windows, Side sun visor driver side, Inner sun visor manual roller blind, Driver's seat: comfort, air-suspended, Passenger seat: standard, 2 bunks, Parking heater cab, I-ParkCool (integrated parking air conditioning), Cool box with freezer compartment 33l under the bunk, Additional thermal insulation of the rear and side walls of the cab, Tinted windows, Central locking, Daytime running lights LED, 2 LED fog lights, Preparation for CB radio, Fifth wheel coupling: Jost JSK 42, 160mm above the frame, Fifth wheel dimension +550mm, Fifth wheel coupling lighting: LED, Working platform, Trailer recognition with LED sensor. Bedpoz Ifliefx Aiwsww

Condition: used, This listing is for a Life Technologies Ion Torrent OneTouch 2 The Ion OneTouch 2 Instrument performs template amplification as part of the manual workflow for the Ion PGM, Ion Proton, Ion S5, and Ion S5 XL systems. It provides scalable template preparation for all Ion semiconductor chips. The instrument has a small footprint and fits easily on any bench top. For a fully automated workflow, please see the Ion Chef Instrument. The Ion OneTouch ES enrichment module is not included in this purchase. For both the Ion OneTouch 2 Instrument and ES module Bwedpfexzg T Dox Aiwow Efficiency and flexibility The Ion OneTouch 2 instrument integrates multiple manual template preparation steps into a single system. This enables parallel processing of multiple samples per day through modular design. It is flexible and supports scalable template preparation for all Ion semiconductor sequencing chips with up to 400 bases on the Ion PGM, up to 200 bases on the Ion Proton System, up to 400 bases on the Ion 520 and Ion 530 chips, and up to 200 bases on the Ion 540 chip. The need for gas is eliminated by the use of a peristaltic pump. Contributing technologies At the heart of the Ion OneTouch 2 Instrument are three breakthrough technologies that enable automated delivery of the template Ion Sphere particles. The first is the reaction filter that creates millions of microreactors in which clonal amplification occurs. The second is the fully integrated thermal cycler and disposable path amplification plate that enables robust thermal cycling of the microreactors. The third is the integrated centrifuge, which recovers the template Ion Sphere particles. Altogether this allows the OneTouch2 instrument to deliver massively parallel clonal amplification and recovery, all in a small bench top footprint.

Condition: excellent (used), Year of construction: 2011, CATALOGUE NUMBER 8016 TECHNICAL DATA - Range of diameters of processed pins: 60-160mm - Max. diameter of input material: 210mm - Min. length of input material: 1000mm - Max. allowance for machining per side: 30mm - Fitted sleeve with a diameter of 90mm - Cutting head drive motor: 22kW - Smooth feed speed adjustment + forward/reverse via frequency inverter - Feed motor: 1.5kW In sequence: Bodpfx As Af Uvneiwjww - Infeed trough - Toothed pull rollers: 6 pcs - 4-knife cutting head - Smooth pull rollers: 6 pcs - Includes 10 sleeves - Dimensions (L/W/H): 2800x1300x2150mm - Weight: approximately 2200kg ADVANTAGES – Manufactured by the Polish brand SAFO – DTR+CE documentation included – Includes sleeves – Used turning machine, very good condition Net price: 98,900 PLN Net price: 23,000 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to higher fluctuations)

Condition: used, Year of construction: 2014, operating hours: 4,908 h, machine/vehicle number: LC658, Used Tetra Pak A3 Speed V40 250ml Prisma filling lineTechnical Specifications & Performance DataThis used bottling line is a complete Tetra Pak aseptic carton solution centered on the A3 Speed filler. Engineered for industrial packaging and beverage production, it delivers high output with precise handling of Prisma cartons. All core modules share the same manufacturing year, providing a cohesive and modern second hand system suitable for efficient aseptic operations.Production speed: up to 24,000 packages/hourPrimary format: 0.25L Prisma cartonContainer type: Carton (aseptic brik)Filler: Tetra Pak A3 Speed, version 040V, year 2014, working hours 4,908Accumulator: Tetra Pak ACHX 30, version 070V, year 2014, working hours 5,528Straw applicator: Tetra Pak SA30, version 040V, year 2014, working hours 5,821Case packer: Tetra Pak CBP30 Speed, version 030V, year 2014, working hours 38Filling process: Aseptic carton fillingManufacturer: Tetra PakAdvanced Automation & Control SystemsThe line combines Tetra Pak engineering across all modules for synchronized operation and high uptime. Centralized operator interfaces and coordinated control logic simplify start-up, ramp-up, and stop sequences, while ensuring consistent product and package quality across the filling, straw application, accumulation, and case packing stages. Format handling for 0.25L Prisma cartons is streamlined with fast, repeatable adjustments and clear operator guidance.Integrated line control for coordinated speeds and bufferingOperator-friendly HMI on core equipmentAutomated interlocks across modules for safe operationRecipe-based format management for 0.25L Prisma cartonsProduction Line Integration CapabilitiesDesigned as an inline solution, this used bottling line accommodates continuous flow from aseptic carton filling to secondary packaging. The accumulator provides essential buffering to keep the filler running during short downstream stops. The straw applicator and case packer complete a compact, high-throughput configuration for beverage production.Machine typeManufacturer / ModelYearFilling MachineTetra Pak A3 Speed (040V)2014Various EquipmentStraw Applicator Tetra Pak SA30 (040V)2014Various EquipmentAccumulation System Tetra Pak ACHX 30 (070V)2014Case PackerTetra Pak CBP30 Speed (030V)... Bodpjzmpzbofx Aiweww

Condition: not inspected (used), Year of construction: 2001, SCM SUPERSET XL Moulder 5 spindles (Comp.5) Description Number of spindles 5 Spindle sequence bottom-right-left-top-bottom Infeed table length 2500mm Working width 25-260mm Working height 6-180mm Feed speed 6-36 mtr / min Bwedpfx Aszqc Snjiwow Spindle speed 6,000 rpm 400Volt 50Hz CE (All changes, mistakes in technical data, info and prices reserved. Availability subject to prior sales. No guarantee on printed data!) (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: used, Year of construction: 2016, Coolant cleaning system Manufacturer: Zyklomat Type: ZKR 14/350 Year of manufacture: 2016 For cleaning grinding emulsions Supply rate: max. approximately 250 L/min at approximately 3.5 bar water pressure Overflow to the filter system is provided on-site, air and foam-free. Maximum temperature: 50°C Cleaning capacity: 350 L/min Recirculation from the clean tank to the dirty tank: 100-350 L/min Machine supply: max. 250 L/min Filtration principle: ZYKLOMAT high-performance hydrocyclone Z1B-9/3 Particle separation limit: approximately 5 µm Medium: Emulsion 3-6% Operating temperature: Ambient temperature Solid particle volume: approximately 5.14 m3 Maximum operating volume: approximately 4.58 m3 Minimum operating volume: approximately 3.60 m3 Process sequence: Fully automatic full-flow filtration Sludge discharge: Fully automatic, with consistent consistency The dirty liquid is fed via on-site pumping stations. The chips and fine sludge generated during grinding (grinding swarf, scale, corundum) are discharged via a scraper conveyor. The sludge is pre-dried in the upper scraper section. Filtration takes place via ZYKLOMAT high-performance hydrocyclones. The system operates fully automatically. Maintenance: annual maintenance Availability: 10-2026 Double scraper tank for discharging grinding sludge Type: KR 1.75-5.1 Total volume: approximately 5.14 m3 Maximum volume: approximately 4.58 m3 Length: approximately 4,000 mm, including 70 mm stiffening Width: approximately 1,890 mm, including 140 mm stiffening Height: approximately 1,105 mm, including 100 mm bottom profile Bodpfxszwccms Aiwsww Neck height: approximately 2,300 mm Theoretical maximum discharge volume: 15 kg/h Function: Coolant storage tank with integrated clean tank, sedimentation and flotation tank with fully automatic sludge discharge. 1 bevel gear motor Voltage 400 V, 50 Hz, IP 54 as scraper drive 3 connection nozzles for return lines from three machines 1 clean liquid tank, integrated at the rear into the scraper tank Oil-tight welded, with internal circumferential bevel gear, various cover plates (non-walkable plates screwed onto angle frame), without ladder, without railing, without internal access rungs Maximum volume: approximately 0.55 m3 41126ä

Condition: used, Desoutter CVI II Controller with Angle Screwdriver Manufacturer: Georges Renault (Desoutter) Controller: CVI II Angle Screwdriver: 01C11200 CVI II Controller From simple start-up procedures to complex sequence applications – with up to 20 phases and 250 cycles – for optimal speed, accuracy, and operator comfort in every fastening process. The controller features various interfaces, including an Ethernet port, an RS232 port, and 7 logic inputs as well as 8 logic outputs (24 volts). The CVI II controller can be used to control a handheld electric tool from the ER series or a stationary screw spindle from the EM series. It is important to note that the CVI II can also be used in combination with a measurement sensor-controlled angle screwdriver, such as the Desoutter ERA40J, which has a torque range of 8 to 40 Nm and a 3/8" output. Memory capacity: Between 2,500 and 8,500 fastening results per station, depending on the number of cycles and operating mode (asynchronous or synchronous). Tightening strategies: Bwedswxv Hkjpfx Aiwew – Torque and angle monitoring – Angle and torque monitoring – Torque and angle monitoring – Torque and angle rate – Prevailing torque – Yield point – Stall torque – Torque and angle – Detection of the plastic zone of the joint – Additional torque and angle sensors – Self-tapping – Current monitoring Connectable tools: Angle screwdriver / Straight screwdriver / Pistol screwdriver / Stationary screw spindles Dimensions (L x W x H): 400 x 400 x 330 mm Weight: 30 kg You can find more items – new and used – in our shop! International shipping costs available upon request!

Condition: used, Year of construction: 2011, machine/vehicle number: M327, Used GANGLOFF filling triblock 23000 BPHTechnical Specifications & Performance DataThis rotary Filling Monoblock CX 6/12 is engineered for high-efficiency beverage production and industrial packaging. Manufactured by Gangloff, it integrates precise filling with reliable capping to support demanding used bottling line and second hand equipment projects without compromising quality. Optimized for PET bottles and still water, the machine combines robust construction with a compact rotary footprint and neck-handling transfer for stable container control at high speeds.Manufacturer: GangloffModel: CX 6/12Year of manufacture: 2011Production speed: up to 23000 bottles/hourFiller configuration: 54 valvesCapper configuration: 13 heads (Zalkin)Current bottle format: 1.5LCompatible container material: PETNeck finish: 29/25Transfer type: Neck-handlingMachine type: RotaryWork direction: CounterclockwiseMaximum bottle height: 340 mmOperating pressure: 6 barControl platform: Schneider PLC and HMIAdvanced Automation & Control SystemsThe monoblock is equipped with Schneider PLC and HMI for stable, intuitive operation and simplified diagnostics. Automated sequences manage filling and capping synchronization, while recipe-based adjustments support quick format transitions. The neck-handling architecture reduces mechanical adjustments when switching bottle heights, enhancing uptime and repeatability. Operator interfaces provide clear status visualization and alarms to maintain consistent beverage production quality.Production Line Integration CapabilitiesDesigned for seamless integration in a complete bottling line, the machine can operate inline with upstream rinsing machines and downstream labeling, inspection, and packaging machinery. The neck-handling conveyor interface ensures gentle container transfer, minimizing scuffs and misalignment. Format flexibility centers on PET bottles with 29/25 necks, with the current setup optimized for 1.5L water. The rotary monoblock layout conserves floor space while delivering continuous, stable throughput for industrial packaging applications.Machine Condition & Maintenance HistoryThe unit is ready for operation and has been overhauled. It is supplied with compatible spare parts and includes a 6-month guarantee. Its current configuration supports immediate deployment in beverage production environments, particularly for still water in PET bottles. The maintained condition and recent service provide a reliable starting point for second hand line upgrades or capacity expansions.Operational Performance & VersatilityThis monoblock is ideal for Water production in PET containers. The 54-valve filler delivers uniform fills at high speeds, while the 13-head Zalkin capper ensures precise torque application and consistent sealing for 29/25 neck finishes. Neck-handling transfer enhances stability across tall form... Bwjdpo Adt Nbsfx Aiwow

Condition: new, Year of construction: 2026, DIABERG SPECTRA — Automatic Screen Printing & Finishing Line A configurable sheet-fed finishing line combining automatic screen printing with UV curing, cold foil and holographic laser-transfer processes. Machine configuration Automatic sheet feeder with sheet-position and feeding-fault detection. Drum-stop cylinder screen-printing unit. Adjustable screen registration and squeegee settings. Touchscreen controls with physical operating buttons. Centralized lubrication for the printing unit. Connected finishing module configured for the selected processes. Automatic sheet collection with alignment, pile-height adjustment and counting. Selectable finishing functions Process Configuration Spot UV Screen-applied UV varnish with UV curing Cold foil Screen-applied adhesive with foil-transfer and curing equipment Laser transfer UV transfer varnish with holographic-pattern transfer and curing Wrinkle effects Compatible screen-printing ink with wrinkle-activation and curing lamps The combined configuration supports different finishing modes. Process settings and production sequences are selected for each job. Reference technical specifications Parameter Catalogue reference Maximum printing area 1,050 × 750 mm Minimum sheet size 560 × 350 mm Printing-unit speed 1,000–4,000 sheets/hour Printing-unit paper range 90–350 g/m² Transfer-module paper range 157–450 g/m² These are individual module specifications. Complete-line material compatibility and operating speed depend on the selected process, matched equipment and sample trials. Bodpj Ahduujfx Aiweww Optional equipment Water-cooled air-cooling section. Servo-controlled squeegee pressure adjustment. Alternative feeder arrangements matched to the substrate. Configuration enquiry Please provide your required sheet size, substrate, grammage, finishing effects and production target to receive a matching machine configuration and technical quotation.

Condition: used, Year of construction: 2006, Overview This Eticap System AR/M 5T 4S CA is an automatic rotary labeling machine for self-adhesive labels on cylindrical bottles, built in 2006 by the Italian manufacturer Eticap System. It has been used for wine bottling and is fitted with four labeling heads for front label, back label, tax strip stamp and neck label. The bottles enter on the conveyor, are spaced by an infeed screw, transferred by starwheels onto the rotating bottle plates of the carousel and labeled in sequence by the heads. The label size is adjustable to the format. The neck label head was never used in production. Technical data - Manufacturer: Eticap System - Model: AR/M 5T 4S CA - Year of manufacture: 2006 - Machine type: rotary self-adhesive labeler for cylindrical bottles - Labeling heads: 4 (front label, back label, tax strip stamp, neck label) - Output: up to 2,000 bottles per hour - Label size: adjustable - Power supply: 380 V - Weight: 1,600 kg - Construction: stainless steel frame with transparent safety guarding Bwodpfx Aez Sp Iwjiwow Equipment - Infeed and outfeed conveyor - Bottle infeed screw and transfer starwheels - Carousel with rotating bottle plates - 4 self-adhesive labeling heads - Stainless steel control cabinet with operator text display, start/stop and conveyor controls - Safety-interlocked doors and emergency stop - CE marking Condition The machine is still installed and can be inspected on site by appointment. Availability Available immediately. Location: Spain.