Used Grain for sale (717)

Condition: used, Refurbished granulator, heavy-duty series, hard-faced Can be used for dry and wet shredding Typical applications: Plastic hollow bodies, secondary shredding of pre-shredded waste, Rotor 800 mm diameter x 1600 mm width Open F7 rotor with replaceable blade supports Drive power 160-250 kw With forced feeding by 3 load-dependent controlled feed screws Hydraulically hinged, hydraulically swiveling screen basket Dwsdpfx Ajztm Eqonzsa Throughput capacity up to 5 t/h depending on material and grain size

Condition: used, The machine is suitable for the agglomeration of thermoplastic films and fibres. The throughput can be estimated to be 500 kg - 1000 kg/h, depending on the material, its condition and humidity. Dwedpfx Aneztm Dmjzea The system consists of: • conveyor belt • load-dependent control for the belt conveyor. • metal detector • HERBOLD granulator type SMS 45/100-H5-3 • pneumatic material transport to the storage silo • plastcompactor unit HV-70 (consisting of a storage silo feeding screw, plastcompactor, central blower, cooling circuit) • HERBOLD secondary granulator type SML 45/100-S4-2 • intensive cooling • SZS II 630/200 conveying fan • screening machine, undersize grain will be returned into the compactor silo. • material conveyor type MFT with big bag station and automatic switchover to the on-site silo • automatic exhaust air filter • electrical control unit • compressor.

Condition: used, Refurbished granulator, heavy-duty series, hard-faced Dsdpjztm Aiefx Anzswa Can be used for dry and wet shredding Typical applications: Plastic hollow bodies, secondary shredding of pre-shredded waste, Rotor 800 mm diameter x 1600 mm width Open F7 rotor with replaceable blade supports Drive power 160-250 kw With forced feeding by 3 load-dependent controlled feed screws Hydraulically hinged, hydraulically swiveling screen basket Throughput capacity up to 5 t/h depending on material and grain size

Condition: used, Refurbished granulator, heavy-duty series, hard-faced Can be used for dry and wet shredding Typical applications: Plastic hollow bodies, secondary shredding of pre-shredded waste, Rotor 800 mm diameter x 1600 mm width Open F7 rotor with replaceable blade supports Drive power 160-250 kw Dwedpsztmv Aofx Anzoa With forced feeding by 3 load-dependent controlled feed screws Hydraulically hinged, hydraulically swiveling screen basket Throughput capacity up to 5 t/h depending on material and grain size

Condition: used, Refurbished granulator, heavy-duty series, hard-faced Can be used for dry and wet shredding Typical applications: Plastic hollow bodies, secondary shredding of pre-shredded waste, Dedpfx Aeztmuronzewa Rotor 800 mm diameter x 1600 mm width Open F7 rotor with replaceable blade supports Drive power 160-250 kw With forced feeding by 3 load-dependent controlled feed screws Hydraulically hinged, hydraulically swiveling screen basket Throughput capacity up to 5 t/h depending on material and grain size

Condition: used, functionality: fully functional, Year of construction: 2023, load capacity: 800 kg, empty load weight: 200 kg, construction width: 1,800 mm, Bulk material bucket Dsdpsu Dyd Njfx Anzswa Technical condition: New Description: Transport of material with a density &#8804 2100 kg/m3 Perfect for transporting grain, soil, gravel... Reinforced construction for maximum load capacity Leveling aid for greater precision Optional bolted LDR shoe rail available on certain models

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2025701, total width: 2,600 mm, total length: 9,500 mm, total height: 1,900 mm, cutting length (max.): 530 mm, type of input current: three-phase, compressed air connection: 8 bar, power of the servo motor: 4,000 W, power: 4 kW (5.44 HP), overall weight: 8,000 kg, inner diameter: 76 mm, feed rate X-axis: 160 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 35 m/min, feed length X-axis: 530 mm, feed length Y-axis: 130 mm, feed length Z-axis: 800 mm, working width: 1,050 mm, input voltage: 380 V, installation height: 2,500 mm, GUTENBERG MASTER BAG 300X (2026) – PPWR-READY High-Speed Square-Bottom Paper Bag Machine High-speed, fully automatic roll-fed machine for producing square-bottom paper bags without handles. The MASTER BAG 300X is designed for industrial paper-bag manufacturers supplying food, bakery, retail, agricultural and European packaging markets. The PPWR-READY EDITION combines efficient bag production with controlled production recipes, approved-material management, batch traceability, waste monitoring and quality documentation. Main features Production speed: up to 180 bags/min Fully automatic roll-fed production Fully servo-driven control system Automatic paper feeding and tension control Precision tube forming and cutting Controlled side-seam and bottom gluing Automatic bottom folding and forming Automatic stacking and counting Dsdpowzm I Rofx Anzewa Multilingual HMI touchscreen Production of printed and unprinted bags Optional inline flexographic printing unit Suitable for approved kraft and coated-paper structures CE conformity for machinery safety PPWR-READY production package The machine can be configured to support the controlled production and documentation of paper bags designed for conformity with Regulation (EU) 2025/40 on Packaging and Packaging Waste—PPWR. Available functions include: Registration of paper supplier, grade and batch Recording of coatings, inks and adhesives Approved-material lists for each bag specification Password-protected production recipes Prevention of unauthorised material substitutions Customer, product and SKU identification Raw-material-to-finished-bag lot traceability Operator identification and production timestamps Paper, adhesive, waste and reject monitoring Recording of dimensional and bonding inspections Production batch and traceability reports Support for technical documentation requested by EU customers Barcode or QR-code material identification option Camera inspection and automatic reject options Suitable applications Flour, sugar, rice, pasta and grains Coffee, tea, spices, lentils and nuts Dried fruit and bakery products Bread, pastries and takeaway food Grocery and retail paper bags Seeds, animal feed and pet-food products Herbal products, powders and supplements Hardware and small industrial parts PPWR-READY acceptance test Final acceptance can be performed using the customer’s actual paper, coating, printing ink, adhesive, bag dimensions and intended filling weight. The test can confirm: Dimensional accuracy Side-seam and bottom integrity Stable production speed Glue consumption Waste percentage Production traceability Batch-report generation Important regulatory information The MASTER BAG 300X is a PPWR-ready production platform. Final PPWR conformity applies to each finished paper-bag specification and depends on the actual paper, coating, ink, adhesive, components, intended use and recycling pathway. Machine CE conformity covers machinery safety and is separate from PPWR conformity of the finished packaging. Model year: 2026Machine type: Square-bottom paper bag machineBag type: Without handlesMaximum speed: Up to 180 bags/minCondition/configuration: Available according to selected equipment package Contact us for price, complete technical specifications, material trials, factory acceptance testing, installation, and delivery conditions.

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, used wet polishing machine from PERS, model Vibra-Line B 150 l, with buffer tank, in combination with PERS dryer Vibra-Dry A 200 l - both demo machines Technical data / Vibra-Line B 150 l: U-shaped work container with automatic discharge Capacity (gross): 150 l Usable volume (depending on workpiece geometry and material): 80 l Year of manufacture: 2024 Diameter, external: 1,170 mm Height: 860 mm Lining in the bowl: 22 mm, yellow or brown PU Total weight (empty): 320 kg Drive power: 2.2 kW Electrical connection: 3 x 400 V, 16 Amp. CEE Device color: RAL 7015/7035 Control cabinet with touch panel and frequency inverter Buffer tank – 90 l: The compound (soap solution) itself flows through the filter basket into the buffer tank, from which a submersible pump pumps the water back to the rotary vibrator. Dimensions of the buffer tank (L x W x H): 700 x 400 x 460 mm 1 submersible pump and 1 filter basket (630 µm) are included Technical data / Vibra-Dry A 200 l: Dwsdpoy A N U Asfx Anzsa Corn/grain dryer with automatic discharge - vibration dryer Year of manufacture: 2024 Volume: 220 l Motor power: 1.5 kW Heating: 3 kW per element (PTI temperature control) Capacity, workpieces: up to 65 kg Capacity, corn: 25-35 kg Speed: 1400 rpm Heating effect: 6 x 1.5 kW Length: 1,141 mm Width: 1,200 mm Height: 905 mm Internal dimensions of the bowl: 240 mm Electrical connection: 3 x 400 V, 16 Amp. CEE Device color: RAL 7015/7035 Corn granule temperature: +30 to +50 degrees Digital temperature control pneumatically controlled outlet valve For commissioning, 25 kg of corn kernels of type GM 16 or GM 20 must be used.

Condition: new, empty load weight: 2,980 kg, maximum load weight: 10,020 kg, overall weight: 13,000 kg, axle configuration: 2 axles, loading space length: 5,110 mm, loading space width: 2,430 mm, suspension: steel, color: other, gearing type: other, driver cabin: other, emission class: none, Equipment: compressed air brake, Three-way tipper, side walls hot-dip galvanized, loading height approx. 940 mm, front wall – foldable for overloading, automatic rear wall opening when tipping backwards, side walls pivoting and foldable, central locking for side and rear walls, side walls with spring relief, floor made of fine-grained steel 4 mm, 8 heavy-duty lashing eyes recessed in the floor, 5-stage, hard-chrome plated three-way tipping cylinder, tipping angle: 50 degrees to the rear and 45 degrees to the side, continuously adjustable drawbar height, rear crossbars can be inserted, geared support winch with load and fast gear, front, integrated receptacle for two aluminum ramps in the chassis, lockable ramp compartment (privacy screen), contour marking according to ECE R 048 standard, -- subject to printing errors, errors and changes, sample images --, more data at: !, More Details: ! Dsdoztntvopfx Anzowa

Condition: new, empty load weight: 2,980 kg, maximum load weight: 8,920 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,110 mm, loading space width: 2,430 mm, suspension: steel, tire size: 245/70 R 17,5, color: other, gearing type: other, front tire size: 245/70 R 17,5, rear tire size: 245/70 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Three-way tipper, loading height approx. 940 mm, front wall foldable for overloading, central locking for side and rear drop sides, automatic tailgate opening when tipping backwards, side boards with spring relief, platform floor made of 4 mm fine-grain steel, 8 strong lashing eyes recessed in the floor, 5-stage hard-chromed three-way tipping cylinder, tipping angle: 50 degrees to the rear, 45 degrees to the sides, infinitely height-adjustable drawbar, removable stakes at the rear, gear support winch with load and quick mode, front-mounted, integrated compartment for two aluminum loading ramps in the chassis, lockable ramp compartment (privacy protection), contour marking according to ECE R 048 regulation, vehicle with day registration, -- subject to printing errors, mistakes and changes, sample images --, More data under: !, More Details: ! Dedpfsztnq Usx Anzjwa

Condition: new, empty load weight: 3,280 kg, maximum load weight: 7,220 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 5,110 mm, loading space width: 2,430 mm, loading space height: 900 mm, loading space volume: 11 m³, suspension: steel, color: other, gearing type: other, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Three-way tipper, loading height approx. 940 mm, front wall - foldable for overloading, central locking for side and rear drop sides, automatic rear wall opening when tipping backwards, side drop sides swinging and foldable, side drop sides with spring relief, bridge floor made of fine-grained steel 4 mm, 8 x strong lashing eyes recessed in the floor, 5-stage hard chrome-plated three-sided tipping cylinder, tipping angle: 50 degree tipping angle to the rear and 45 degree tipping angle to the side, infinitely height-adjustable drawbar, stanchions pluggable at the rear, geared support winch with load and fast gear, front, mounting shaft for two aluminum ramps integrated in the chassis, lockable ramp shaft (privacy screen), contour marking according to ECE R 048 regulation, , Rental price from 550 ¤, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Dwjdpfsztnp Rsx Anzoa

Condition: new, empty load weight: 2,980 kg, maximum load weight: 8,920 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,110 mm, loading space width: 2,430 mm, suspension: steel, tire size: 245 / 70 R 17,5, color: other, gearing type: other, front tire size: 245 / 70 R 17,5, rear tire size: 245 / 70 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Three-way tipper, loading height approx. 940 mm, front wall foldable for overloading, central locking for side and rear drop sides, automatic rear wall opening when tipping backwards, side walls swinging and foldable, side drop sides with spring assistance, platform floor made of 4 mm fine-grain steel, 8 strong lashing eyes recessed into the floor, 5-stage hard-chromed three-way tipping cylinder, tipping angle: 50 degrees to the rear and 45 degrees to the sides, continuously height-adjustable draw tube, removable rear stakes, gearbox support winch with load and high-speed mode at front, integrated receiver compartment for two aluminum loading ramps in chassis, lockable ramp compartment (privacy protection), contour marking according to ECE R 048 regulation, vehicle with day registration, -- Subject to misprints, errors and changes, sample images --, More data at: !, More details: ! Dwedpfx Asztnqnsnzja

Condition: new, empty load weight: 3,280 kg, maximum load weight: 9,720 kg, overall weight: 13,000 kg, axle configuration: 2 axles, loading space length: 5,110 mm, loading space width: 2,430 mm, loading space height: 900 mm, loading space volume: 11 m³, suspension: steel, color: other, gearing type: other, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Three-way tipper, with side wall extension 900 mm high, loading height approx. 940 mm, front wall - foldable for overloading, central locking for side and rear drop sides, automatic rear wall opening when tipping backwards, side drop sides swinging and foldable, side drop sides with spring relief, bridge floor made of fine-grained steel 4 mm, 8 x strong lashing eyes recessed in the floor, 5-stage hard chrome-plated three-sided tipping cylinder, tipping angle: 50 degree tipping angle to the rear and 45 degree tipping angle to the side, infinitely height-adjustable drawbar, stanchions pluggable at the rear, geared support winch with load and fast gear, front, mounting shaft for two aluminum ramps integrated in the chassis, lockable ramp shaft (privacy screen), contour marking according to ECE R 048 regulation, , Rental price from 550 ¤, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Dwsdpfx Ajztnqujnzoa

Condition: new, empty load weight: 2,980 kg, maximum load weight: 8,920 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,110 mm, loading space width: 2,430 mm, suspension: steel, tire size: 245/70 R 17,5, color: other, gearing type: other, front tire size: 245/70 R 17,5, rear tire size: 245/70 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Three-way tipper, loading height approx. 940 mm, front wall foldable for overloading, central locking for side and rear drop sides, automatic tailgate opening when tipping backwards, side boards with spring relief, platform floor made of 4 mm fine-grain steel, 8 strong lashing eyes recessed in the floor, 5-stage hard-chromed three-way tipping cylinder, tipping angle: 50 degrees to the rear, 45 degrees to the sides, infinitely height-adjustable drawbar, removable stakes at the rear, gear support winch with load and quick mode, front-mounted, integrated compartment for two aluminum loading ramps in the chassis, lockable ramp compartment (privacy protection), contour marking according to ECE R 048 regulation, vehicle with day registration, -- subject to printing errors, mistakes and changes, sample images --, More data under: !, More Details: ! Dwodpfoztnq Iox Anzja

Condition: used, maximum load weight: 25,260 kg, overall weight: 38,000 kg, axle configuration: 2 axles, first registration: 03/2024, next inspection (TÜV): 04/2027, Equipment: ABS, Excerpt of Equipment: Load area: Low-bed with central beam in extendable design, length approx. 6,750 mm. 5 pairs of lashing rings that can be folded outwards (LC 5,000 daN). 1 pair of lashing rings that can be folded outwards (LC 10,000 daN). 1 pair of lashing rings lying horizontally at the rear in the loading area (LC 10,000 daN). The supply lines are protected in the central beam and adapt to the respective low-bed length. Gooseneck: Gooseneck, length approx. 3,900 mm. Gooseneck can be hydraulically raised/lowered and extended. Technical saddle load: 23,000 kg. Rear axle: Rear axle in short design with closed outer frame and diamond plate cover. Axle with excavator trough, which is closed in the rear half to accommodate the air tanks. 2 pairs of lashing rings that can be folded outwards (LC 5,000 daN). 1 pair of lashing rings that can be folded outwards (LC 10,000 daN). Axles: BPW axles, hydro-mechanically forced steering. Technical axle load: 12,000 kg each. Air suspension with raise and lower valve. Axle tool. Tires: Tires 245/70 R 17.5 3PMSF – Manufacturer of our choice. Load index (146/146F). Braking system: Braking system according to EU regulations with EBS-E (2S2M) without connection lines to the tractor unit. Steel construction: Steel construction made of high-strength fine-grained steels. Steel grades: S355J2+N/S355MC (yield strength 355 MPa). S690QL/S700MC (yield strength 690 MPa). Paint: High-quality 2-component (2K) topcoat in a single color, RAL 3002 carmine red. Dodpfszdxlksx Anzswa Includes the following additional equipment: - 2-inch kingpin. - One galvanized steel front bulkhead, approx. 400 mm high. - One spare wheel holder in front of the bulkhead. - Yellow-red air couplings on the galvanized connection strip at the front. - 4 wheel chocks with holder (± 5 kg). - Steering from the front and rear by means of a cable remote control with push buttons, with single-axle control (without installation in the tractor unit). - Electro-hydraulic unit (± 45 kg). - Yellow reflector tape according to EU regulations on the side, on the extension and at the rear of the trailer. - 1 wooden block, approx. 500x250x200 mm. - Mounting rail for aluminum loading ramps at the rear of the vehicle. - One holder for a rotating beacon at the rear of the trailer. - One mud flap at the rear of the trailer. - European reflector signs (red-yellow) at the rear of the trailer. - On the gooseneck and at the rear panel on the left and right, one holder each for the warning signs, including socket. - Manual and instructions on a USB stick. - Speed sticker 80 km/h at the rear and on both sides. - Load manometer for determining the axle loads including load diagram. Includes special accessories: On the gooseneck, aluminum side boards and rear panel, pluggable, approx. 2,440 x 400 mm (L x H). The rear galvanized plug-in supports are removable (length of the superstructure approx. 2,560 mm) (± 46 kg). On the gooseneck, a separate air connection with an air gun. 2 work spotlights with switch on the trailer, mounted on the left and right on the gooseneck platform. 6 pairs of rung pockets for plug-in supports, approx. 100 x 50 mm in the outer frame of the loading area, 2 pairs in the outer frame of the axle (± 29 kg). Extensions galvanized, extendable by approx. 230 mm on each side (± 262 kg). Hydraulic connections from the gooseneck to the low-bed with multi-coupling instead of screw couplings. Central lubrication system with 2 pumps BEKAMAX (Pico) with normal grea

Condition: used, axle configuration: 3 axles, first registration: 09/2021, loading space length: 9,700 mm, loading space width: 2,480 mm, loading space height: 2,200 mm, loading space volume: 53 m³, Chassis, Light Version Aluminium (15-6-12) Two fully-automatically welded I-beam longitudinal members with welded cross members. Chassis width: 1,600 mm. Axles and Suspension: SAF-Intradisc light axle assemblies, 'off-road version', with 3 x 9 t disc brake axles (430 mm), SAF air suspension, centrally arranged to the chassis longitudinal members. 1st axle with liftable air bellows, starting aid and manual forced lowering. Smart Board Info Center, Hebert lowering valve, front load pressure gauge. Tyres and Wheels on Alloy Rims 6 wheels with tyres size 385/65 R 22.5 approx. 50% tread, 11.75 x 22.5 ET 120, UNI wheel bolts for alloy rims. Kingpin 2" screwed into an 8 mm thick 'light' plate. Landing Gear Support winches, load capacity 2 x 20 t, with swivel foot for air suspension. Braking System In accordance with E.G. standards, twin-line Wabco system, spring-actuated parking brake operating on two axles, with Wabco EBS-E including RSS (Roll Stability System), Wabco Smartboard Info Center, aluminium air reservoir system. Electrical System In compliance with StVZO guidelines, 3 round three-chamber lamps (Aspöck type), 24-volt system with 2x 7-pin and 1x 5-pin socket, 2x 7 side marker lamps, 2 central rear LED reverse lights, 1 round fog lamp, 4 LED work lights, 1 interior LED lamp, 4 red LED position lights in the door header. All air and electrical lines are neatly laid in plastic conduits. Dwjdpfx Aozr Tcaonzoa Tipper Body / Tipping Skip "Smooth Construction" Internal structure fully welded. Aluminium skip, side walls made from 30 mm thick plank profiles (2-3 mm), 600 mm wide and welded, floor plate 8 mm thick highly wear-resistant alloy (5383H34/HB 110) with 90-degree profile to side walls, front wall 4 mm reinforced in straight design, rear wall as universal door in straight design with 2 wing doors (1/2–1/2 configuration) and grain slide. Universal door operated automatically-pneumatically, separately lockable lever, rear frame in swing-out ALU design, two hold-downs with rubber buffers on the tipper skip fixed to the chassis at the front wall. Hydraulic System Tipping Cylinder with "Sheath" Suspension Hydraulic cylinder mounted on the front wall, operating pressure 150 bar, manufacturer Edbro, approx. 2.5 m hydraulic hose and loose end 1", tipping angle approx. 48 degrees. Accessories 6 Parlok mudguards, complete spray flaps across full vehicle width fixed to underrun protection, no spare wheel holder ALU, side underrun protection right side foldable, large tool box type 860, approx. 3 m aluminium ladder, 3 aluminium swing hoops in the centre approx. 150 mm elevated, additional central hoop support, roll tarp with central light strip and separate reinforcements in high wear areas, approx. 660 g/m² quality, tarp rolling system with quick tension closure, continuous rubber rope at rear edge with two tension hooks to be fastened to rear swing hoop, walkway on the chassis, rear tarp closure welded with rubber rope to prevent water ingress, robust folding underrun protection, 2 "Clear-Pass" spray flaps on mudguard (EG-compliant), aluminium grain funnel with sack fitted laterally to frame, holder for shovel, broom and scraper mounted above the axles, etc. Unladen weight: 5,950 kg Offer and images non-binding

Condition: used, axle configuration: 3 axles, first registration: 06/2024, loading space length: 8,900 mm, loading space width: 2,480 mm, loading space height: 2,200 mm, loading space volume: 49 m³, Lightweight chassis version Made of aluminum (15-6-12) Two fully automatically welded I-beam longitudinal members with welded cross members. Chassis width 1,600 mm Axles and suspension: 430 mm disc brake "off-road version" JOST (formerly DCA) axle assemblies, 3 x 9 tons with air suspension, air bellows in a central arrangement on the chassis longitudinal member. 1st axle can be lifted with starting aid and manual forced lowering, Smart Board infocenter, lift/lower valve, BVA brake wear indicator Dwjdpfx Anozr Tcgjzsa Tires and wheels: 6 wheels with tires size 385/65 R 22.5, approximately 60% tread, with steel rims 11.75 x 22.5 ET 120, universal wheel bolts for aluminum rims Kingpin: 2" screwed into an 8 mm thick plate "light" Landing gear: Landing gear with two speeds, 2x 20 tons support load for air suspension, we use swivel feet Braking system: According to E.E.G. standard, dual-line system Wabco, spring-loaded parking brake acting on two axles and Wabco EBS-E incl. RSS (Roll Stability System), Wabco Smartboard Infocenter, Aluminum air tank system Electrical system: According to STVZO guidelines with 2 five-chamber lights type Aspöck, 24-volt system with 2x7 and 1x 15-pole socket with side marker lights, 2 separate LED reversing lights 1 LED work light inside at the front All air and electrical lines are neatly routed in plastic pipes! Tipping body/dump body: interior fully welded Aluminum dump body, side walls 30 mm thick plank profiles (2-3 mm) 600 mm wide, welded, floor 6 mm thick, highly wear-resistant alloy (5383H34/HB 110) with 45-degree angled profile to the side wall, front wall 4 mm thick, reinforced in an angled design, rear wall as a universal door in a straight design with 2-wing doors in a 2/3-1/3 design with a grain slide, ALURound profile for sealing the door gap on the rear doors, welded on the side and bottom, rear doors partially clad with aluminum, operation of the universal door automatically-pneumatically with a separate lever, lockable, rear supports made of aluminum, swivelable, two lower retainers with rubber buffers on the tipping body attached to the frame on the front wall Hydraulic system: tipping cylinder with "small" housing, suspension Hydraulic cylinder mounted on the front wall with a working pressure of 150 bar, manufactured by Edbro with approximately 2.5 m hydraulic hose and male coupling 1", tipping angle approx. 48 degrees Accessories: 6 Parlok fenders, complete splash guards over the entire vehicle width attached to the U-shaped protection, without spare wheel holder, aluminum, side underrun protection on the right in foldable design, toolbox type 860 large, approx. 3 m aluminum ladder, 3 aluminum swivel supports in the middle, raised by approx. 150 mm, additionally, a centrally mounted support receiver for positioning a total of 2 supports to increase the loading width, tarpaulin with a central light strip and separate reinforcements in the wear areas, quality approx. 660 g/m2 with tarpaulin system, continuous rubber cord in the rear end of the tarpaulin to be attached to two tension hooks on the swivel support at the rear, walkway on the frame in chassis color, tarpaulin closure with quick-release fastener, tarpaulin end at the rear with welded rubber cord against water ingress, robust foldable underrun protection in aluminum, 2 "Clear- Pass" splash guards on the fender according to EC standard, an aluminum grain chute with tarpaulin bag attached to the side on the frame, holder for shovel, broom and scrape

Condition: used, axle configuration: 3 axles, first registration: 10/2023, loading space length: 8,900 mm, loading space width: 2,480 mm, loading space height: 2,200 mm, loading space volume: 48 m³, Lightweight chassis version Made of aluminum (15-6-12) Two fully automatically welded I-beams with welded crossmembers. Chassis width 1,600 mm Axles and suspension: Disc brake 430 mm "off-road version" JOST (formerly DCA) axle units, 3 x 9 tons, with air suspension, air bellows arranged centrally to the chassis longitudinal beam, 1st axle liftable with starting aid and manual forced lowering, Smart Board info center, lifting/lowering valve, BVA brake wear indicator Tires and wheels: 6 wheels with tires size 385/65 R 22.5, approx. 60% tread, with steel rims 11.75 x 22.5 ET 120, UNI wheel bolts, aluminum rims Kingpin: 2" - screwed into an 8 mm thick plate "light" Landing gear: Landing gears with two speeds, 2x 20 tons support load. We use swivel feet for air suspension. Dodpfxezr Tcye Anzjwa Braking system: According to E.E.G. standard, two-line system Wabco, spring-loaded parking brake acting on two axles and Wabco EBS-E incl. RSS (Roll-Stability System), Wabco Smartboard info center, Aluminum air tank system Electrical system: According to the guidelines of the STVZO (German Road Traffic Licensing Regulations) with 2 five-chamber lights, type Aspöck, 24-volt system with 2x 7 and 1x 15-pole socket with side marker lights, 2 sep. LED reversing lights 1 LED inside on the front wall All air and electrical lines are neatly routed in plastic pipes! Tipping body/dump bed: Fully welded interior Aluminum dump bed, side walls made of 30 mm thick plank profiles (2-3 mm) welded together, 600 mm wide, bottom made of 6 mm thick, highly wear-resistant alloy (5383H34/HB 110) with 45-degree angled profile to the side wall, front wall reinforced, 4 mm, in an angled design, rear wall as a universal door in a straight design with 2-wing doors in a 2/3-1/3 design with a grain slide, ALU round profile for sealing the door gap welded to the rear doors on the side and bottom, rear doors partially covered with smooth aluminum, operation of the universal door automatically-pneumatically with a separate lever that can be locked, rear support outriggers made of ALU, swiveling, two tie-down straps with rubber buffers attached to the frame on the front wall of the tipping bed, Hydraulic system: Tipping cylinder with "small" housing Hydraulic cylinder mounted on the front wall with a working pressure of 150 bar, manufacturer Edbro with approx. 2.5 m hydraulic hose and coupling half 1", tipping angle approx. 48 degrees Accessories: 6 Parlok fenders, complete splash guards over the entire vehicle width attached to the U-shaped protection, without spare wheel holder made of aluminum, side underrun protection on the right in a foldable design, toolbox type 860 large, approx. 3 m aluminum ladder, 3 aluminum swivel supports in the middle, raised by approx. 150 mm, additional centrally mounted support holder for positioning a total of 2 supports to increase the loading width, tarpaulin with a central light strip and separate reinforcements in the wear areas in approx. 660 gr./m2 quality with tarpaulin system, circumferential rubber cord in the rear end of the tarpaulin to be attached with two tension hooks on the swivel support at the rear, walkway on the frame in chassis color, tarpaulin closure with quick-release fastener, tarpaulin end at the rear with welded rubber cord to prevent water ingress, robust foldable underrun protection made of aluminum, 2 "Clear- Pass" splash guards on the fender according to EG standard, an aluminum grain chute with a tarpaulin bag attached to the side

Condition: used, axle configuration: 3 axles, first registration: 09/2008, loading space length: 9,700 mm, loading space width: 2,350 mm, loading space height: 2,165 mm, loading space volume: 50 m³, Chassis ALU chassis, aluminium alloy 5383H34 Two fully automatically welded T-profiles (width 200 mm) Corrosion protection between steel and aluminium components, continuous rubber bonded under pressure onto the longitudinal beams for maximum stability via integrated tipping bearing shaft with wear-resistant, pressed-in special bushes, chassis width approx. 1,600 mm, air and electrical lines integrated in a plastic conduit. Axles and Suspension, Disc Brakes Jost-disc axle assemblies 3 x 9 tons with DCA air suspension, lift and lower valve, load pressure gauge, 3rd axle automatically liftable Tyres and Wheels 6 wheels fitted with 385/65 R 22.5 tyres approx. 50–60% tread remaining, on silver steel rims, 11.75x22.5 ET 120 Landing Gear Mechanical support legs, 2 x 20 ton load capacity, pivoting feet used for air suspension systems Brake System In compliance with EC standards, dual-circuit Wabco system, spring-loaded parking brake acting on two axles, EBS-E system Wabco 2S/2M, with RSS system (Roll Stability Support), aluminium air tanks Electrical System According to German Road Traffic Licensing Regulations (StVZO) with two five-chamber Aspöck LED lights, 24V system with two 7-pin and one 15-pin sockets at front, EBS socket, LED side marker lights, 2 clearance lights, 2 separate LED reversing lights Tipping Body / Bin ALU bin, side walls with welded vertical aluminium profiles, floor approx. 6 mm thick wear-resistant aluminium alloy (5383H34), Brinell HB 110, front wall sloped design in 4 mm ALU with reinforcement profiles for tipping cylinder mount, side walls in 3 mm hard alloy, straight rear wall, universal door with automatic-pneumatic (lockable) swinging and 2/3-1/3 split hinged tailgate, double linkage, manufactured from 4 mm aluminium, 1 grain chute with water protection, wear plates on sides approx. 400-1,000mm x 3,000mm x 4mm Hydraulic System Hydraulic cylinder mounted on front wall with working pressure 150 bar, make: Edbro, with approx. 2 m hydraulic hose and 1" loose half-coupling Accessories 6 Parlok plastic mudguards with 2 Stas mud flaps, 3 m aluminium ladder, reinforced underrun protection in folding execution with 2 towing eyes, 1x folding side guard, walkway on front wall with side access ladder (left), 3 ALU hoops in pivoting design, 1x centre hoop support, rolling tarpaulin with central aluminium tube, rolling tarpaulin system, tarpaulin approx. 660 g/m², quick-release fastener (without tension belts), wheel spanner, 2x wheel chocks, toolbox type 800, continuous splash guard mounted on underrun protection, etc. Djdpfxozr Tcte Anzewa Offer and pictures subject to change.

Condition: new, empty load weight: 3,490 kg, maximum load weight: 8,110 kg, overall weight: 11,600 kg, axle configuration: 2 axles, loading space length: 5,700 mm, loading space width: 2,430 mm, suspension: steel, tire size: 355/60 R 18, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 355/60 R 18, rear tire size: 355/60 R 18, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Three-sided tipper, side walls 600 mm high, galvanized, + lattice extension 1,000 mm high, wide tires 355/60 R 18, loading height approx. 970 mm, central locking for side and rear walls, side walls pivoting and foldable, side walls with spring relief, floor made of fine-grained steel 4 mm, 12 x heavy-duty tie-down points recessed in the floor, tipping angle: 50 degrees rearward and 45 degrees sideways, continuously adjustable drawbar height, rear supports pluggable, geared support winch with load and fast gear, front, receiving shaft for two aluminum ramps integrated into the chassis, contour marking according to ECE R 048, surcharge for aluminum ramps, load capacity per pair 10 tons and 2 x folding supports, rear, ramps suitable for steel-tracked vehicles and rubber-tired vehicles, price: 1,900 euros, -- printing errors, errors and changes reserved, sample images --, more data at: !, More details: ! Dodpozr Ummefx Anzowa

Condition: new, empty load weight: 3,280 kg, maximum load weight: 7,220 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 5,110 mm, loading space width: 2,430 mm, loading space height: 900 mm, loading space volume: 11 m³, suspension: steel, color: other, gearing type: other, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Three-way tipper, loading height approx. 940 mm, front wall – foldable for overloading, central locking for side and rear drop sides, automatic rear wall opening when tipping backwards, side drop sides swinging and foldable, side drop sides with spring relief, bed made of fine-grain steel 4 mm, 8 x heavy-duty lashing eyes recessed in the floor, 5-stage, hard-chrome-plated three-way tipping cylinder, tipping angle: 50 degrees to the rear and 45 degrees to the side, continuously adjustable drawbar, rear posts can be inserted, geared support winch with load and fast gear, front, integrated receiving shaft for two aluminum access ramps in the chassis, lockable ramp shaft (visual protection), contour marking according to ECE R 048 regulation, -- printing errors, errors and changes excepted, sample images --, more data under: !, More Details: ! Dwodpfozr Ukrsx Anzea

Condition: new, empty load weight: 2,980 kg, maximum load weight: 10,020 kg, overall weight: 13,000 kg, axle configuration: 2 axles, loading space length: 5,110 mm, loading space width: 2,430 mm, suspension: steel, color: other, gearing type: other, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Three-way tipper, loading height approx. 940 mm, front wall - foldable for overloading, central locking for side and rear drop sides, automatic rear wall opening when tipping backwards, side drop sides swinging and foldable, side drop sides with spring relief, bridge floor made of fine-grained steel 4 mm, 8 x strong lashing eyes recessed in the floor, 5-stage hard chrome-plated three-sided tipping cylinder, tipping angle: 50 degree tipping angle to the rear and 45 degree tipping angle to the side, infinitely height-adjustable drawbar, rear stanchions can be plugged in, geared support winch with load and fast gear, front, mounting shaft for two aluminum drive-on ramps integrated in the chassis, lockable ramp shaft (privacy screen), contour marking according to ECE R 048 regulation, , -- Misprints, errors and omissions excepted, sample images --, More data under: !, More Details: ! Dedpfx Aozr Sfaenzewa

Condition: new, empty load weight: 2,980 kg, maximum load weight: 8,920 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,110 mm, loading space width: 2,430 mm, suspension: steel, tire size: 245 / 70 R 17,5, color: beige, gearing type: other, front tire size: 245 / 70 R 17,5, rear tire size: 245 / 70 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Three-way tipper, loading height approx. 940 mm, front wall foldable for overloading, central locking for side and rear drop sides, automatic rear wall opening when tipping backwards, side walls swinging and foldable, side drop sides with spring assistance, platform floor made of 4 mm fine-grain steel, 8 strong lashing eyes recessed into the floor, 5-stage hard-chromed three-way tipping cylinder, tipping angle: 50 degrees to the rear and 45 degrees to the sides, continuously height-adjustable draw tube, removable rear stakes, gearbox support winch with load and high-speed mode at front, integrated receiver compartment for two aluminum loading ramps in chassis, lockable ramp compartment (privacy protection), contour marking according to ECE R 048 regulation, vehicle with day registration, -- Subject to misprints, errors and changes, sample images --, More data at: !, More details: ! Dodpfx Anezr Sd Nozowa

Condition: new, empty load weight: 3,090 kg, maximum load weight: 8,510 kg, overall weight: 11,600 kg, axle configuration: 2 axles, loading space length: 5,700 mm, loading space width: 2,430 mm, suspension: steel, tire size: 355/60 R 18, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 355/60 R 18, rear tire size: 355/60 R 18, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Three-way tipper, sideboards 500 mm high, galvanized, wide tires 355/60 R 18, loading height approx. 970 mm, central locking for side and rear sideboards, side sideboards pivoting and foldable, side sideboards with spring relief, platform floor made of fine-grained steel, 4 mm thick, 12 x heavy-duty lashing eyes recessed in the floor, tipping angle: 50 degrees rear tipping angle and 45 degrees side tipping angle, continuously adjustable drawbar, rear stakes can be inserted, geared support winch with load and fast gear, front, integrated receiving shaft for two aluminum loading ramps in the chassis, contour marking according to ECE R 048 regulation, surcharge for aluminum ramps, load-bearing capacity per pair 10 tons and 2 x folding supports, rear, ramps suitable for steel-tracked vehicles and vehicles with rubber tires, price: 1,900 euros, -- subject to printing errors, errors and changes, sample images --, more data at: !, More details: ! Dedpjzr Sb Iefx Anzswa

Condition: new, empty load weight: 3,280 kg, maximum load weight: 9,720 kg, overall weight: 13,000 kg, axle configuration: 2 axles, loading space length: 5,110 mm, loading space width: 2,430 mm, loading space height: 900 mm, loading space volume: 11 m³, suspension: steel, color: other, gearing type: other, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Three-way tipper, with side wall extension 900 mm high, loading height approx. 940 mm, front wall - foldable for overloading, central locking for side and rear drop sides, automatic rear wall opening when tipping backwards, side drop sides swinging and foldable, side drop sides with spring relief, bridge floor made of fine-grained steel 4 mm, 8 x strong lashing eyes recessed in the floor, 5-stage hard chrome-plated three-sided tipping cylinder, tipping angle: 50 degree tipping angle to the rear and 45 degree tipping angle to the side, infinitely height-adjustable drawbar, stanchions pluggable at the rear, geared support winch with load and fast gear, front, mounting shaft for two aluminum ramps integrated in the chassis, lockable ramp shaft (privacy screen), contour marking according to ECE R 048 regulation, , Rental price from 550 ¤, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Dwedpfx Aezr Sdcenzsa