Used Grinding Head for sale (19,033)

Condition: excellent (used), Rema double grinding head / school machine wheel mass (in mm) 300/40/76 power (in KW): 1,8 Speed (rpm): 1450 Voltage: 380 Volt Lamp Shields Location: Ex stock 54634 Bitburg Itjdpfx Aohaf Ndsg Non - immediately available -

Year of construction: 2016, condition: excellent (used), REF: MM6207 1 x Cotswold Mechanical Ltd 4-head linear weigher, previously used for pizzas toppings. Technical specification ⚙️ Isdpexdkcnsfx Ag Netn ✅ Manufacturer - Cotswold Mechanical Ltd ✅ Model - C4000. ✅ Date of manufacture - 2016. ✅ Weighing range - 30g up to 20-30kg (depending on product). ✅ 4 x weighing heads feeding into 2 x depositing hoppers. ✅ Overall dimensions - 1400mm long x 1800mm deep x 3100mm high.

Condition: used, This listing is for the Labtec SciLog Tandem 1081 ChemTec Peristaltic Pump with Tandem Model 1081 Head The unit is in full working condition and is ready for immediate use Dual‑head design Equipped with two independent pump heads, allowing simultaneous delivery of two separate fluid lines or higher combined flowrate. Flow & pressure range Capable of delivering metered flow in applications like bioreactors, diafiltration, titration, and general chemical dosing. It handles pressures from 0 up to approximately 60 psi. Precise liquid metering Designed for volumetric and mass flow measurement tasks, maintaining consistency in dosing/reagent addition. Control interface Includes an RS‑232 serial interface for external control via software or integration into automation systems Use Cases Bio‑processing & fermentation: Automated nutrient or reagent addition in tandem line setups. Filtration processes: Controlling flow through membranes in diafiltration or tangential flow filtration. Isdsxhfg Nopfx Ag Notn Titration and pH control: Precise dosing of acids/bases based on sensor or feedback-controller inputs. General lab fluid handling: Pumping corrosive or viscous liquids safely without contamination, thanks to peristaltic tubing.

Condition: good (used), Indoor crane, crane, trolley, crane running gear, crane undercarriage, girder undercarriage, headcarriage for bridge cranes, ceiling crane headcarriage, headcarriage single girder bridge crane Isdpfjtpkv Aox Ag Nstn -Manufacturer: Demag, 1 set of end carriages for single girder bridge crane -Load capacity: 3000 kg -Drive motor: Mannesmann Demag 16I6 KF 8-2 0.15/0.60 Kw -Support rollers: Ø 160 mm / support width 148 mm, dimensions see photos -Dimensions: 2300/650/H570 mm / 300 kg each -Transport dimensions: 2300/1230/H570 mm -Weight: 600 kg/total

Condition: used, Year of construction: 1990, table length 600 mm table width 380 mm control FANUC 0-M longitudinal travel 500 mm cross travel 300 mm largest grinding diameter 230 mm control FANUC 0-M Jig grinding machine | HAUSER - S35-400 The machine is in a well-maintained condition. Isdpfx Agjw Eykys Netn Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: S35400 | S35 400 | S35CNC400 | S35 | S-35 | S 35

Condition: new, Lot of Sanding Belts / Grinding Belts 420x1900 Large lot of new sanding belts / grinding belts / non-woven belts from brands including Tapir. Approx. 140 pieces. See images for type and grit. Isdpfxoxnxuyo Ag Njtn Condition: New Type: Sanding Belt Belt Width: 420 mm Belt Length: 1900 mm

Condition: as good as new (ex-display), 1 unused universal milling head for retrofitting to conventional, NC or CNC milling machines or boring mills of any kind, "HURON" system, swivels over 2 axes, every angle adjustable. Spindle taper: ISO 40 Reach approx. 360 mm Designed drive power: 10 HP Max. speed: 1,800 rpm Weight: approx. 82 kg Accessories / Special features: • Manual tool clamping • Main spindle and all shafts and gears made of case-hardened and tempered chrome-nickel steel • 2 rotatable axes making every setting angle possible! "HURON" system • Tapered drives ground according to "KLINGELNBERG" system • Main spindle bearings made of high-precision tapered roller bearings • 1 tool drawbar • Operating manual Delivery time: immediate, subject to prior sale Itedpfx Ajdbny Ejg Non Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Year of construction: 2015, condition: excellent (used), REF: MM6206 1 x Cotswold Mechanical Ltd 4-head linear weigher, previously used for pizzas toppings. Technical specification ⚙️ Iodoxdi Ehspfx Ag Nstn ✅Manufacturer Cotswold Mechanical Ltd ✅ Model - C4000. ✅ Date of manufacture - 2015. ✅ Weighing range - 30g up to 20-30kg (depending on product). ✅ 4 x weighing heads feeding into 2 x depositing hoppers. ✅ Overall dimensions - 1400mm long x 1800mm deep x 3100mm high.

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 0112F-01, grinding length: 600 mm, grinding width: 300 mm, grinding wheel diameter: 320 mm, overall weight: 2,500 kg, No reserve price – guaranteed sale to the highest bidder! The payment period for the machine is one week after purchase! Submitting a bid obligates you to collect the machine in a timely manner between 17/11/2025 and 21/11/2025! TECHNICAL DETAILS Grinding length: 600 mm Grinding width: 300 mm Iodpfxexm R A Te Ag Nstn Grinding wheel diameter: 320 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,500 x 2,400 x 1,800 mm Total weight: 2,500 kg EQUIPMENT Magnetic chuck (600 x 300 mm) Coolant treatment system

Condition: excellent (used), Grinding wheel, cup wheel, double grinder, surface grinder, cylindrical grinder -Inside: Ø 50 mm -Outside: Ø 200 mm -Width: 40 mm -Number: 12x grinding wheels available -Price: per piece Itjdpsb A Ni Asfx Ag Nen -Weight: 2.1 kg

Condition: used, Year of construction: 2017, grinding range 600 x 300 x 400 mm magnetic plate size 600 x 300 mm distance spindle center to table 5500 mm max. table load 250 kg grinding wheel speeds 1.900 U/min longitudinal feed 680 mm cross travel 245 mm control STÖCKEL - ST-2 Surface Grinding Machine | STÖCKEL - FX 6030 ST-2 The machine is in good condition. Itsdpfx Ageu Rt Tqe Nen A machine video will be shared on request. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: FX6030 | FX-6030 | FX6030ST | FX 6030 ST

Condition: ready for operation (used), Head and Return Drums in divers diameters and Lengths Iedpfxsi A Aq So Ag Netn

Condition: excellent (used), Year of construction: 2011, Series 19-No.6 with chain loader, 5-position grinding wheel changer Itedpfxoxl Txnj Ag Nsn

Condition: good (used), 1 x Fortress Technology twin-head metal detector with flip-arm reject into reject bin. Technical specification ⚙️ Itsdpsxdiy Eefx Ag Nen ✅ Model - Stealth standard head and Stealth ferrous head. ✅ Aperture dimensions - STD - 350mm wide x 150mm high (110mm useable). ✅ Ferrous - 370mm wide x 135mm high (95mm high). ✅ Belt dimensions - 2100mm long x 305mm wide.

Condition: new, width of the strips 50.0 mm Ijdpfx Agoxaaxqo Njtn band length 940 mm band speed 3.0 - 22 m/min turning speeds 1450 U/min tube diameter 16.0 - 114 mm radius 180 ° total power requirement 4.75 kW weight of the machine ca. 265 kg range L-W-H 1000 x 750 x 1300 mm Furnishing: - stationary pipe belt grinders - Automatic material feed with separate drive motor - Replacement sanding belts - Stepless speed adjustment - Manual adjustment of tube tension - Polish bent pipes up to 180" (angle). - Manual work possible without feed - CE mark / declaration of conformity

Condition: used, diameter 85 mm tool adaptor SK 50 bore of diameter max. 130 mm adjustment of the slide 40 mm tool tapers in the slides 20 mm weight ca. 3 kg Machine dealer with own stock of 1600 m². Itedpfxjv Dx Aao Ag Non

Condition: used, Deckel engraving tool grinding machine SOE with various grinding wheels, various collets + accessories Itodpfoxpimvox Ag Njn

Condition: excellent (used), Year of construction: 2014, Surface grinding machine Manufacturer: Ziersch Type: ZT 24 Year of construction: 2014 Control system: Mitsubishi GOT-1000 Technical data of the vehicle: ----- - Travel X/Z: 400 / 250 mm - Magnet: 400 x 200 mm P9 - Table load max.: 250 kg - Distance from center of grinding wheel to table: 540 mm - Y-axis with direct path measuring system - Grinding wheel: 250 x 38 mm (50.8 mm bore) - Gradual grinding spindle control 1,000 to 4,500 rpm - Grinding spindle new in 04-2024! - V-constant - automatic vertical infeed with compensation of the dressing amount - Coolant device / paper belt filter - Magnetic separator - Weight: approx. 2,900 kg Itodjpwkt Ispfx Ag Njn - Dimensions: 2,600 x 1,800 x 2,350 mm Accessories: ----- - Documentation - Handwheel

Condition: good (used), Year of construction: 2008, functionality: fully functional, Technical specifications: Grinding range 3200 x 1800 mm Cross travel 1680 mm Longitudinal travel 3300 mm Distance from table to spindle center 1155 mm Distance between columns 2000 mm Magnetic clamping plate size 3200 x 1500 mm Table load including magnet 6000 kg Feed - longitudinal axis 5000 - 30000 mm/min. Feed - cross axis 2000 mm/min. Feed - vertical axis 2000 mm/min. Grinding wheel dimensions: Diameter 500 mm Width 120 mm Bore 203.2 mm Grinding spindle motor power 32 kW Grinding spindle motor control range 1000 to 3000 rpm. Connected load: 66 kW Machine weight: 39000 kg Space requirements: Length: 11030 mm Width: 6075 mm Height: 4450 mm Equipment and accessories: Itodpfxow Hwrds Ag Nsn MITSUBISHI GOT 1000 CNC control system 1000-liter coolant system with paper belt filter system Oil mist extraction system Various grinding wheels Automatic dresser for the grinding wheel Magnetic plate 3200 x 1500 mm Machine documentation

Condition: used, The Rema S2/60 is a robust and precise drill grinding machine for professional sharpening of spiral drills from Ø3 to Ø60 mm. Equipped with an Ausspitz motor for split-point grinding, this machine offers optimal centering and low drilling forces. Ideal for workshops and industrial applications where accuracy and durability are required. Specifications Drill diameter (min–max): Ø 3 mm to Ø 60 mm. Point angle range: 10° to 180°. Number of cutting edges: 1–12 (right- or left-handed). Slide motor (grinding): 0.9 kW. Ausspitz motor (split-point): 0.25 kW. Itodpfjxnvtasx Ag Nsn Coolant pump: 0.9 kW. Total drive power: 0.9 kW. Power supply: 400 V (50 Hz). Dimensions Length: 530 mm. Width: 410 mm. Height: 1100 mm. Weight: approx. 300 kg.

Condition: used, Year of construction: 1990, table length 800 mm table width 300 mm grinding wheel diameter 400 mm grinding wheel width 50 mm turning speed range 1470 U/min In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Itsdpfx Agexmk Ezs Nsn Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: good (used), Year of construction: 1997, Geldmacher engraving tool grinding machine GS 10 with collet set Itsdpfsxpfc Tex Ag Njn

Condition: excellent (used), Year of construction: 1999, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, overall weight: 9,500 kg, spindle speed (max.): 12,000 rpm, mount diameter: 40 mm, 3-axis machining center Manufacturer: DMG Series: DMU-80P Year of manufacture: 1999 Control type: Heidenhain TNC-430 Switch-on hours: approx. 95,900 h Program run: approx. 28,100 h technical data: ----- - Travel X-Y-Z: 800 x 700 x 600 mm - Work table: 900 x 630 mm - Spindle max.: 12,000 rpm - Swivel head H/V - Tool holder: SK40 - Tool magazine: 30x / chain - Coolant system - Central lubrication - SpäFö - Weight: approx. 9.2 t Accessories: ----- - Manuals - 3D workpiece probe TS-641 Remarks: ----- - FEB 2023: new spindle + kinematics Ijdporqhbbsfx Ag Notn - FEB 2023: new E-module 36kW - APR 2023: new AC servo inverter - DEZ 2015: General overhaul - Machine absolutely true to size!

Condition: used, Year of construction: 1988, Year 1988 In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject Itodpfxjxmk Eus Ag Njn to prior sale!

Condition: used, grinding length 500 mm grinding width 200 mm Ijdpfxjxmk Ens Ag Nstn In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!