Used Haas Multigrind for sale (227)

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 1,016 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, controller manufacturer: HAAS, table load: 1,814 kg, overall weight: 7,485 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 44,700 W, number of slots in tool magazine: 30, number of axes: 3, This 3-axis HAAS VF-3YT/50 was manufactured in 2019. It features an impressive X-axis travel of 1,016 mm, Y-axis travel of 660 mm, and Z-axis travel of 635 mm. The machine is equipped with a high-performance spindle capable of 10,000 rpm and a 30-position automatic tool changer. If you are looking to get high-quality machining capabilities, consider the HAAS VF-3YT/50 vertical machining centre we have for sale. Contact us for further details. • Condition: Used, fully operational • Operating/cycle hours: 6,744 h • Spindle/cutting hours: 4,454 hTravels • Spindle nose to table: 201–836 mm • Rapid traverse: 18 m/min • Maximum cutting feed: 12.7 m/minSpindle and tool changer • Maximum torque: 460 Nm • Drive system: Vector drive with 2-speed gearbox • Tool changer capacity: 30 toolsTable • Table size: 1,372 × 610 mm • T-slots: 7 • T-slot width: 15.9–16 mmShipping • Note: Dimensions listed as 1,370 × 660 × 630 mm are not overall machine dimensions • Export shipping dimensions (approx.): 3,970 × 2,600 × 3,230 mm • Approx. shipping weight: 7,485 kg Additional equipment • Chip conveyor with four additional augers • Haas Chip Lift • Through-Spindle Coolant (TSC), 300 psi / 21 bar • Programmable coolant nozzle • Coolant chiller • ACF 25-micron auxiliary coolant filter • Coolant mist condenser • Minimum Quantity Lubrication (MQL) • Automatic air gun Ibjdpfx Amszwd Auo Dec • Through-Tool Air Blast (TAB) • PulseJet system • Renishaw Wireless Intuitive Probing System (WIPS) with probe riser block • Fourth-axis drive and wiring • High-Speed Machining (HSM) • DWO/TCPC (Dynamic Work Offsets/Tool Center Point Control) • RTAP-3 synchronized tapping • Wi‑Fi network connection and Wi‑Fi camera • Automatic door • High-intensity lighting • Approximately 15 tool holders • Complete documentation Technical Specification Taper Size ISO 50

Year of construction: 2009, condition: used, NH3 refrigeration system. Refrigeration system includes the following: - Compressor 1, GEA Grasso type OS3 - Compressor 2, GEA Grasso type OS3 - NH3 separator - Air condenser - Heat exchanger for energy recovery with pump - 2 x ice water pumps - Brewing water pump - 2 water coolers - Expansion tank with control cabinet for NH3 separator and compressors 1 and 2, with SIMATIC MULTI PANEL touch control Additional title: refrigerant ammonia Brew water flow: 5 m3/h 2 bar Ice water flow: 15 m3/h 2 bar Refrigerant capacity: 85 kg Ammonia Compressor capacity: 145 m³/h Power: Q0: 2 x 119 kW Operation / Control: Siemens S7 Isdpfxsxbn Upe Am Dsbc Features: 2 x compressors: 145 m³/h, 26 kW with Frequency Converter, 37 kW nominal output; ammonia separator mounted on frame, with brewing water-cooler and ice water-cooler; air condenser on frame 3 x 2.95 kW; heat-exchanger for recovery with pump; 2 x ice water pumps ( 2.2 kW, 15 m3/h, 2 bar ); brewing water pump ( 1.1 kW, 5 m3/h, 2 bar ); expansion tank, max. permissible operating pressure: high pressure side: 22 bar, low pressure side: 16 bar

Condition: ready for operation (used), Year of construction: 2011, operating hours: 4,500 h, functionality: fully functional, machine/vehicle number: 1084327, travel distance X-axis: 1,016 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 10,000 rpm, Equipment: chip conveyor, The following automation systems are also being auctioned from the same location: System 3R Workpartner (Search ID: 21119877) System 3R Workpal 1 (Search ID: 21119737) System 3R Transformer Workmaster (Search ID: 21119557) Ibedpfx Ajyfuq Tom Doc TECHNICAL DETAILS X-axis travel: 1,016 mm Y-axis travel: 508 mm Z-axis travel: 635 mm Spindle speed: 10,000 rpm Number of tool positions: 40 Tool holder: BT 40 MACHINE DETAILS Control: Haas Spindle hours: approx. 4,500 h EQUIPMENT Chip conveyor Hardened clamping plate, 20-M10 Tool measurement / tool breakage monitoring Digital 3D touch probe Renishaw Automation interface Automatic side door Oil mist extraction Internal coolant supply

Condition: ready for operation (used), Year of construction: 2014, operating hours: 60,000 h, controller manufacturer: HAAS, spindle speed (max.): 12,000 rpm, number of axes: 3, This 5-axis HAAS UMC-750 was manufactured in 2014. It features a vertical machining center with a 12000 rpm spindle, BT40 tooling, and a 40 tool holder capacity. Additional highlights include coolant through spindle, a probe, toolsetter, and high-speed machining capabilities. Consider the opportunity to buy this HAAS UMC-750 vertical machining center. Contact us for more information about this machine. • Through-spindle coolant (water and air), 21 bar • High-speed machining option • ATC capacity: 40 tools • Workpiece probe • Tool setter • Prepared for side automation (PP) Technical Specification Ibjdpfjx Ixh Nsx Am Dsc Taper Size BT 40

Condition: good (used), Year of construction: 2008, HAAS VF-5D / 40 MACHINING CENTER TRAVELS : X : 1,270 mm Y : 660 mm Z : 635 mm DISTANCE BETWEEN PLANE – TABLE AND SPINDLE NOSE : 178 – 813 mm TABLE : DIMENSIONS : 1,321 x 584 mm LOAD CAPACITY : 1,815 mm NUMBER AND SIZE X PITCH OF T-SLOTTS : 7.14 X 80 mm SPINDLE : ROTATIONAL SPEED : 8,000 RPM SPEED RANGES : 2 SPINDLE NOSE : ISO 40 HIGH PRESSURE / INTERNAL COOLANT FEEDS : RAPID SPEED : 18,000 mm / min. WORKING SPEED : 12,700 mm / min. JOG : 0 – 1,260 mm / min. TOOL MAGAZINE : 24 POSITIONS POWER : 15 KW WEIGHT : KG. 7,000 Ibsdpjvf Nw Djfx Am Djc YEAR OF FIRST INSTALLATION : 2008

Year of construction: 2010, condition: ready for operation (used), Travel X/Y/Z: 1016mm/508mm/635mm, speed: 10000rpm, table dimensions X/Y: 1219mm/457mm, max. table load: 1550kg, tool positions: 20, rapid traverse X/Y/Z: 25m/min/25m/min/25m/min. Machine dimensions X/Y/Z: approx. 4000mm/2800mm/2600mm, weight: approx. 5400kg. Documentation available. On-site inspection is possible. Isdpou T Rgqofx Am Debc

Year of construction: 2006, condition: ready for operation (used), Number of axes: 3, table dimensions: 1210x267mm, max. spindle speed: 4000rpm, weight: approx. 2t. An on-site inspection is possible. Ibjdpfx Aey Uyf Asm Dec

Condition: used, Year of construction: 2007, turning diameter 250 mm turning length 500 mm control FANUC tool taper VDI 40 weight of the machine ca. 3,0 t HAAS SL-20THE CNC Lathe – Year 2007 Isdpozvq Disfx Am Dobc Technical specifications - Max. turning length: 500 mm - Max. turning diameter: 250 mm - Swing over bed: 584.2 mm - Swing over cross slide: 241.3 mm - Distance between centers: approx. 609.6 mm - X-axis travel: 214.6 mm - Z-axis travel: 508 mm - Spindle nose: A2-6 - Spindle bore: approx. 76.2 mm - Max. spindle speed: 4,000 rpm - Spindle motor power: 14.9 kW / 20 HP - Driven/live tool stations: up to 10 - Input voltage: 360–480 V - Power supply: 3-phase

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 12,000 rpm, spindle motor power: 22,400 W, number of axes: 3, This 3-axis HAAS VF-4SS vertical machining center was manufactured in 2008. It features a 1270 × 508 × 635 mm travel range, 22.4 kW spindle power, and a maximum spindle speed of 12,000 rpm. The machine includes a 40 + 1 position tool changer and a high-speed machining package. If you are looking to get high-quality milling capabilities, consider the HAAS VF-4SS machine we have for sale. Contact us for more information. • Distance spindle–table: 102 mm Iodpfox D Irmsx Am Dobc • Tool holder taper: CT40 (DIN 69871) • Max cutting feed: 20.5 m/min • Rapid feed (X/Y/Z): 35.6 m/min • Tool changer type: Random vertical • Tool magazine capacity: 40 + 1 positions • Data interface: USB • Options/Features: • Through-spindle coolant system (21 bar) • 4th axis drive and wiring (prepared for 4th axis) • Intuitive programming system • Dual spindle orientation • Coordinate rotation system • Macro variables and scaling functions • High-speed machining package Additional equipment • Screw-type chip conveyor • Auxiliary high-pressure filtration system

Condition: excellent (used), Year of construction: 2019, travel distance X-axis: 711 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 394 mm, spindle speed (max.): 15,000 rpm, spindle nose: BT 30, number of slots in tool magazine: 20, These are two identical Haas DT-2 machining centers equipped with automation. · Yaskawa GP-series industrial robot · Tray transport via robot · Parts handling for both items using a combination robot gripper Ijdpeyg Dfisfx Am Dobc · Machining: one workpiece per machine Equipment: Through-spindle coolant (IKZ) Wireless probing system Chip conveyor Including automation

Condition: used, TECHNICAL DETAILS - Number of axes : 3 MILLING SPINDLE - Tool holder type : BT40 - Spindle power : 15 [kW] - Spindle speeds : 8100 [rpm] - Gearbox - Speed ranges : 2 - Number of spindle hours : 4000 [h] LINEAR AXES - Travels on X/Y/Z axes : 1270/508/635 [mm] - Rapid traverses rates (X/Y/Z) : 35.6/35.6/35.6 [m/min] - Cutting feed rates (X/Y/Z) : 21 [m/min] - Distance table / spindle nose (min./max.) : 742 [mm] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 40 TABLE - Table dimensions : 1321/495 [mm] - Maximum weight upon table : 794 [kg] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 30 [kW] WEIGHT & DIMENSIONS - Machine floor space : 3870/2510 [mm] - Machine height : 2690 [mm] - Machine weight : 6260 [kg] MACHINE HOURS - Number of hours under power : 16247 [h] Ibjdpfxeyn R Igs Am Dsc - Number of working hours : 6025 [h] EQUIPMENT - CNC : HAAS - Interface : Ethernet / RS232 / USB / PCMCIA - Interactive programming - Electronic handwheel - Rigid tapping - Prepared for a 4th-5th axis divider - Coolant tank : 208 [l] - Chips conveyor - Tool probe - Electric transformer

Condition: ready for operation (used), Year of construction: 2023, operating hours: 1,775 h, spindle speed (max.): 4,500 rpm, travel distance X-axis: 239 mm, travel distance Y-axis: 102 mm, travel distance Z-axis: 584 mm, spindle motor power: 22,400 W, number of axes: 4, This 4-axis HAAS DS30Y horizontal turning machine was manufactured in 2023. It features a maximum part swing of 533 mm and a maximum cutting diameter of 349 mm. The machine is equipped with a robust turret that accommodates 12 tools and offers a maximum cutting length of 826 mm. If you are looking to get high-quality turning capabilities, consider the HAAS DS30Y machine we have for sale. Contact us for further details regarding this machine. • Capacities (S.A.E / Metric) • Chuck size: 10.0 in (254 mm) • Max part swing: 21.0 in (533 mm) • Max cutting diameter (with BMT65 turret): 13.75 in (349 mm) • Max cutting length (varies with workholding): 32.5 in (826 mm) • Bar capacity: 3.00 in (76 mm) • Between centers: 32.5 in (826 mm) • Feedrates (S.A.E / Metric) • Rapids on X: 472 ipm (12.0 m/min) • Rapids on Y: 472 ipm (12.0 m/min) • Rapids on Z: 945 ipm (24.0 m/min) Ibjdszhwx Dopfx Am Doc • Axis Motors (S.A.E / Metric) • Max thrust X: 4100 lbf (18,238 N) • Max thrust Y: 2300 lbf (10,231 N) • Max thrust Z: 5100 lbf (22,686 N) • Main Spindle (S.A.E / Metric) • Spindle nose: A2-6 • Drive system: Direct speed, belt drive • Max torque: 275.0 ft-lbf @ 500 rpm (373.0 Nm @ 500 rpm) • Draw tube bore: ø 3.0 in (76 mm) • Spindle bore: ø 3.50 in (88.9 mm) • Main Spindle C Axis (S.A.E / Metric) • Max speed: 60 rpm • Max rating: 5.0 hp (3.7 kW) • Positioning (±): 0.01° • Brake diameter: 13.9 in (353 mm) • Brake holding torque: 250 ft-lbf (339 Nm) • Control type: Interpolated motion and positioning • Secondary Spindle (S.A.E / Metric) • Chuck size: 8.3 in (210 mm) • Spindle nose: A2-5 • Drive system: Direct speed, belt drive • Max rating: 15.0 hp (11.2 kW) • Max speed: 4000 rpm • Max torque: 100.0 ft-lbf @ 870 rpm (135.6 Nm @ 870 rpm) • Spindle bore ø (non-through): 0.81 in (20.7 mm) • Secondary Spindle C Axis (S.A.E / Metric) • Max rating: 5.0 hp (3.7 kW) • Max speed: 60 rpm • Positioning (±): 0.01° • Brake diameter: 8.5 in (216 mm) • Brake holding torque: 140 ft-lbf (190 Nm) • Control type: Interpolated motion and positioning • Secondary Spindle Positioning (M119) (S.A.E / Metric) • Positioning (±): 0.02° • Brake diameter: 8.5 in (216 mm) • Control type: Positioning only • Turret (S.A.E / Metric) • Number of tools: 12 stations • OD vs ID tools: Any combination (will vary with turret) • Boring bar rear clearance (from back of turret): 4.00 in (102.0 mm) • Live Tooling (S.A.E / Metric) • Max speed: 4000 rpm • Drive ratio: 1:1 • Tooling: BMT65 • General (S.A.E / Metric) • Coolant capacity: 55 gal (208 L) • Air Requirements (S.A.E / Metric) • Air required: 4 scfm @ 100 psi (113 L/min @ 6.9 bar) • Inline air hose: 3/8 in • Coupler (air): 3/8 in • Air pressure min: 80 psi (5.5 bar) • Electrical Specification (S.A.E / Metric) • Drive system: Direct speed, belt drive • Spindle power: 30.0 hp (22.4 kW) • Input AC voltage (3 phase) - Low: 220 VAC; Full load amps (Low): 70 A • Input AC voltage (3 phase) - High*: 440 VAC; Full load amps (High*): 35 A • Dimensions - Shipping (S.A.E / Metric) • Domestic pallet: 171 in x 90 in x 98 in (434 cm x 229 cm x 249 cm) • Export pallet: 171 in x 90 in x 98 in (434 cm x 229 cm x 249 cm) Additional equipment • Bar feeder Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 500 mm, rotational speed (max.): 7,500 rpm, Equipment: chip conveyor, Longitudinal travel X: 508 mm Cross travel Y: 400 mm Vertical travel Z: 508 mm CNC type: Haas Table length: 600 mm Table width: 355 mm Max. table load: 1350 kg Tool magazine: 20 positions Spindle taper: ISO 40 Iedpfx Amexq D Ece Dsbc Max. spindle speed: 7500 rpm Spindle motor power: 8.3 kW Dimensions (L x W x H): 2200.0 × 2000.0 × 2300.0 mm Weight: 3190 kg

Condition: used, Year of construction: 2005, turning diameter 250 mm turning length 700 mm control FANUC weight of the machine ca. 3,35 t HAAS SL-30THE CNC Lathe – Manufactured in 2005 Ibsdpfx Aszvq Dvjm Djc Technical Specifications - Max. turning diameter: 250 mm - Max. turning length: 700 mm - Number of axes: 2 - X-axis travel: 287 mm - Z-axis travel: 864 mm - Spindle bore: 69 mm - Max. spindle speed: 3,400 rpm - Tool turret: 12-station - Tool holder: VDI 40 - Power supply: 360–480 V, 3-phase, 50/60 Hz - Rated power: 22 kW - Max. connected load: 70 A - Full-load current: 40 A - CNC control: FANUC Features - 12-position tool turret - VDI-40 tool holder - Hydraulic chuck - Hydraulic tailstock - Chip conveyor - Coolant system - Full enclosure with safety interlock - Suitable for single-part and series production - Technical documentation

Condition: used, Year of construction: 2020, workpiece weight (max.): 5 kg, table width: 267 mm, table length: 1,466 mm, table load: 159 kg, tool diameter: 89 mm, Used Machining Center Brand: Haas Model: TM-2P Year: 08/2020 Serial Number: 1170479 Operating hours: Spindle on time: 12,000h Specifications: - Travels (X, Y, Z): 1016mm, 406mm, 406mm - Spindle to table distance (Min. - Max.): 102 - 508mm - Spindle speed: 6000 rpm - Spindle power: 5.6 kW - Taper: BT 40 - Tool changer carousel: 10 positions - Maximum tool diameter: 89mm (adjacent) - Maximum tool weight: 5.4kg - Coolant pump kit - HAAS CNC - Table dimensions: 1466x267mm - Maximum table load: 159kg Iedpfsxqc H Sex Am Dobc - Maximum feed rates on all three axes: 10.2m/min.

Condition: used, Year of construction: 2008, turning diameter 432 mm turning length 864 mm control HAAS bar diameter 76 mm 3-jaw-chuck diameter 254 mm travel -z axis 864 mm travel -x axis 287 mm spindle speed: 3400 1/min spindle bore 88 mm swing over bed 762 mm swing diameter over bed slide 432 mm turret head 12 Pos. VDI 40 drive capacity - spindle motor 22 kW voltage 400 V weight of the machine ca. 7.250 t dimensions of the machine ca. 3,90 x 2,00 x 1,90 m Ijdpfx Amoupmhwo Dsbc - serial-no.: 3082298 - Machine Run Time: ---- h - control: HAAS - tool measuring arm - chip conveyor - collant equipment

Condition: ready for operation (used), Year of construction: 2018, operating hours: 7,016 h, travel distance X-axis: 1,626 mm, travel distance Y-axis: 813 mm, travel distance Z-axis: 762 mm, spindle speed (max.): 12,000 rpm, number of axes: 3, This 3-axis HAAS VM-6 was manufactured in 2018. It features an impressive X-axis travel of 1,626 mm, Y-axis travel of 813 mm, and Z-axis travel of 762 mm. If you are looking to get high-quality machining capabilities, consider the HAAS VM-6 vertical machining centre we have for sale. Contact us for further details. Ibsdezh Hgdepfx Am Dec

Condition: ready for operation (used), Year of construction: 2008, operating hours: 1,752 h, functionality: fully functional, machine/vehicle number: 2052592, travel distance X-axis: 1,626 mm, travel distance Y-axis: 1,270 mm, travel distance Z-axis: 813 mm, table load: 4,536 kg, spindle speed (max.): 6,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range X-axis: 1,626 mm Travel range Y-axis: 1,270 mm Travel range Z-axis: 813 mm Table length: 1,626 mm Table width: 914 mm Table load: max. 4,536 kg Spindle speed: 6,000 rpm Drive system: geared head Torque: max. 610 Nm at 500 rpm Power: max. 22.4 kW Thrust force X/Y axis: max. 24,910 N Thrust force Z axis: max. 33,362 N Rapid traverse: max. 13.7 m/min Cutting feed rate: max. 12.7 m/min Tool diameter with full tooling: max. 102 mm Tool diameter with free adjacent positions: max. 254 mm Tool-to-tool time: 10.3 s Chip-to-chip time: 12.6 s MACHINE DETAILS Dimensions (L x W x H): 3,660 x 3,880 x 3,190 mm Operating hours (see image) Spindle hours: 1,752 h Ibedpfxozd Tcds Am Dec Servo hours: 15,789 h

Condition: used, Year of construction: 2008, functionality: fully functional, Used HAAS rotary table model HRT310 complete with HAAS pneumatic drive and tailstock. Ibedpfx Ajwu Uahem Dsc

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 2,134 mm, travel distance Y-axis: 813 mm, travel distance Z-axis: 762 mm, spindle speed (max.): 7,500 rpm, spindle motor power: 22,400 W, number of axes: 4, This 3-axis HAAS VF 7/50 was manufactured in 2017, featuring extensive axis travels with X-Axis at 2,134 mm, Y-Axis at 813 mm, and Z-Axis at 762 mm. It supports a maximum workpiece weight of 1,814 kg and includes a spindle speed up to 7,500 rpm. Ideal for robust machining tasks, consider the opportunity to buy this HAAS VF 7/50 vertical machining centre. Contact us for more information about this machine. • Spindle-to-table distance: 127–889 mm • Table • Dimensions: 2,134 × 711 mm Ibodpfx Aex Imrpsm Doc • T-slots: 5 • T-slot width: 125 mm • Max workpiece weight: 1,814 kg • Spindle • Tool holder taper: CT 50 • Tool magazine • Tool capacity: 30 + 1

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 1,626 mm, travel distance Y-axis: 1,016 mm, travel distance Z-axis: 762 mm, spindle speed (max.): 7,500 rpm, spindle motor power: 15,000 W, number of axes: 3, This 3-axis HAAS VF-8 vertical machining center was manufactured in 2003. It features a 1626 x 1016 x 762 mm travel range, a 15.4 kW spindle power, and a maximum spindle speed of 7500 rpm. Equipped with a BT-40 tool holder, a 24+1 position tool changer, and a screw-type chip conveyor. If you are looking to get high-quality milling capabilities consider the HAAS VF-8 machine we have for sale. Contact us for more information. • Distance spindle–table: 102 mm • Max cutting feed: 12 m/min • Rapid feed (X/Y/Z): 18 m/min • Tool changer type: Random vertical • Tool magazine capacity: 24 + 1 positions • CNC memory: 1 MB • Monitor: 15" color • Data interface: RS232 • Rigid tapping: Yes • Options/features included: • 2-speed gearbox spindle • 4th axis drive and wiring • Intuitive programming system • Coordinate rotation system • Macro variables and scaling functions • Programmable coolant nozzle • Internal work light Additional equipment • Screw-type chip conveyor Ibjdox D H Rujpfx Am Djc Technical Specification Taper Size BT 40

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, table load: 680 kg, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel X-axis: 762 mm Travel Y-axis: 406 mm Travel Z-axis: 508 mm Table length: 914 mm Isdpfx Aox Up Dhem Dobc Table width: 356 mm Table load capacity: max. 680 kg Spindle speed: 12,000 rpm Feed Rapid traverse X-axis: max. 35.6 m/min Rapid traverse Y-axis: max. 35.6 m/min Rapid traverse Z-axis: max. 35.6 m/min Tool Changer Capacity: 24+1 Tool holder: CAT 40 Max. tool diameter: 76 mm Tool change time: 1.6 s Chip-to-chip time: 2.2 s MACHINE DETAILS Machine weight: 3,629 kg

Condition: ready for operation (used), A small universal tool grinding machine Haas Trossingen is available. Grinding spindle diameter: 60mm-90mm, grinding wheel diameter: 175mm, taper: 15mm. The machine has been overhauled. An on-site inspection is possible. Ibjdpoyyb Txjfx Am Doc

Condition: ready for operation (used), Year of construction: 2003, spindle speed (max.): 3,200 rpm, travel distance X-axis: 318 mm, travel distance Z-axis: 660 mm, spindle motor power: 224,000 W, total height: 1,900 mm, overall weight: 7,200 kg, product length (max.): 3,800 mm, number of axes: 2, This HAAS SL-30 was manufactured in 2003. A robust horizontal turning machine featuring X/Z travel of 318/660 mm, turning diameter of 533 mm, and length of 660 mm. It includes a bar capacity of 76 mm, spindle power of 22.4 kW, and a maximum spindle speed of 3,200 rpm. Equipped with a 12-position tool turret and a semi-automatic hydraulic tailstock. Consider the opportunity to buy this HAAS SL-30 horizontal turning machine. Contact us for more information. • Turning diameter: 533 mm • Turning length: 660 mm • Spindle nose: A2-6 • Bar capacity: 76 mm • Spindle bore diameter: 254 mm • Max cutting speed: 10.2 m/min • Rapid feed rate: 24 m/min • Tool presetter: Yes Iodpfx Amsx D Irgj Dobc • Tailstock: Semi-automatic hydraulic • Tool turret: 12 positions, VDI 40 Additional equipment • Chip conveyor: Screw type • Bar feeder: LNS Quik Load Servo III Dimensions Machine Depth 1800 mm

Condition: ready for operation (used), A Haas CNC vertical milling center is available. Travel X/Y/Z: 1010mm/508mm/635mm, table dimensions X/Y: 1200mm/450mm, max. table load: 1500kg, rapid traverse: 25m/min, feed rate: 16m/min, tool stations: 20, machine dimensions X/Y/Z: approx. 3500mm/2500mm/2800mm, weight: approx. 6000kg. An on-site inspection is possible. Ibodpoyv H Hiefx Am Doc