Used Haas Sl 20 for sale (211)

Condition: used, Year of construction: 2013, travel distance X-axis: 508 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, spindle speed (max.): 15,000 rpm, Equipment: chip conveyor, TECHNICAL DETAILS Travel range, X-axis: 508 mm Travel range, Y-axis: 406 mm Travel range, Z-axis: 508 mm Distance from spindle nose to machine table: max. 610 mm Distance from spindle nose to machine table: min. 102 mm Rated power: max. 22.4 kW Torque: max. 122.0 N·m at 2,000 rpm Torque with optional gearbox: max. 339 N·m at 450 rpm Spindle design: metric Spindle taper: SK40 Spindle speed: 15,000 rpm Cjdpozxhmtsfx Apberh Table length: 660 mm Table width: 356 mm Width of T-slots: 15.90 to 16.00 mm Center distance of T-slots: 125 mm Number of T-slots in standard configuration: 3 Load capacity of the table with uniform distribution: max. 1,361 kg Feed rate during machining: max. 16.5 m/min Rapid traverse, X-axis: 25.4 m/min Rapid traverse, Y-axis: 25.4 m/min Rapid traverse, Z-axis: 25.4 m/min Tool diameter (overall): max. 89 mm Tool weight: max. 5.4 kg Tool-to-tool change time (average): 4.20 s Chip-to-chip change time (average): 4.50 s MACHINE DETAILS Coolant tank capacity: 208 l Input voltage AC, three-phase, low: 220 V AC Full-load current, three-phase, low: 70 A Input voltage AC, three-phase, high: 440 V AC Full-load current, three-phase, high: 35 A Weight: 3539 kg The seller estimates the operating hours to be approximately 9,000 hours. EQUIPMENT 20-position tool changer Chip conveyor Internal cooling, 21 bar Coolant mist extraction system Additional coolant filter

Condition: good (used), Year of construction: 2015, Traverses XYZ: 762 x 508 x 508mm, 500mm Diameter table, max table weight 300kg, table tilt +120°, -35°, 22.4kW, 12000rpm, Crodokticxspfx Apbjh CT40, 40 station tool changer, coolant, Tool Setter, Programmable coolant, swarf conveyor,

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 1058083, controller manufacturer: HAAS/FANUC, number of slots in tool magazine: 40, MACHINE DETAILS Tool changer: 40 positions Codjxuikxopfx Apborh Tool holder: BT40 Control: HAAS/FANUC Electrical data Voltage: 360–480 V Phases: 3 Frequency: 50/60 Hz Full load: 20 A Maximum load: 35 A

Condition: excellent (used), Year of construction: 2023, operating hours: 1,168 h, functionality: fully functional, Controller HAAS Swing dia. 641 mm Swing over carriage 413 mm Maximum cutting diameter 229 mm Maximum cutting length 356 mm X axis travel 200 mm Z axis travel 355 mm Bar Capacity 44mm Spindle Speed 6000 rpm Spindle Nose A2-5 Rapid Feedrates X/Y/Z = 30,5 / 30,5 m/minute Spindle Motor Power 11 kW Turret Positions 12 stations Weight 3200 Kg Dimensions LxWxH = 3048 x 2108 x 1803mm Accesories, features - Integrated tool presetter - Chip conveyor - 3 jaws hydraulic chuck D160 mm - Without tailstock Credpfewvgbyjx Apbjh - Foot pedal - Machine mounts - Manuals The machine is barelly used and is in great technical and optical condition.

Condition: used, YEAR 2015 MANUFACTURER HAAS AUTOMATION INC MODEL VF 5/40 Crjdpfx Asz Dwqvepbjh CNC HAAS

Condition: excellent (used), Year of construction: 2022, operating hours: 2,394 h, functionality: fully functional, Controller HAAS Swing dia. 641 mm Swing over carriage 413 mm Maximum cutting diameter 229 mm Maximum cutting length 356 mm X axis travel 200 mm Y axis travel +/-50 mm Z axis travel 355 mm Bar Capacity 44mm C axis 0,01 degrees Spindle Speed 6000 rpm Spindle Nose A2-5 Milling spindle speed 6000 rpm Rapid Feedrates X/Y/Z = 30,5 / 12,7 / 30,5 m/minute Spindle Motor Power 11 kW Codpfswvf Thox Apbjrh Turret Positions 12 stations Tool holder type VDI30 Weight 3600 Kg Dimensions LxWxH = 3048 x 2108 x 1803mm Accesories, features - C Axis programmable - Y Axis - Live tool turret (each places) - Integrated tool presetter - Chip conveyor - 3 jaws hydraulic chuck D160 mm - Tailstock - Foot pedal - Machine mounts - Manuals The machine is barelly used and is in great technical and optical condition.

Condition: ready for operation (used), Year of construction: 2011, controller manufacturer: HAAS, This 3-axis HAAS VF-4 was manufactured in 2011. It features a generous X-axis travel of 1270 mm, Y-axis travel of 508 mm, and Z-axis travel of 635 mm. The machine is equipped with a 40-tool automatic tool changer and includes a probe and toolsetter for enhanced precision. If you are looking to get high-quality machining capabilities, consider the HAAS VF-4 vertical machining centre we have for sale. Contact us for further details. Credpfezxp D Hjx Apbjh

Condition: excellent (used), Year of construction: 2019, operating hours: 6,300 h, functionality: fully functional, machine/vehicle number: 311539, With a 310 mm diameter chuck with 3-jaw operation Jorgensen conveyor and coolant system Standard technical data Spindle Chuck: 12 inches (305 mm) Bar capacity: 102 mm Spindle nose: A2-8 Maximum speed: 3,200 rpm Power: 40 hp (≈30 kW) Machining capabilities Maximum turning diameter: 533 mm Maximum cutting diameter: 349 mm Maximum turning length: 826 mm Maximum distance between centers: 826 mm Axis travels X: 239 mm Y: ±50.8 mm (total travel 102 mm) Crodpfxjzzw Npe Apboh Z: 826 mm Turret and powered tools 12-position turret Powered tools Integrated C-axis for milling, drilling, and tapping Rapid traverse rates X: 12 m/min Y: 12 m/min Z: 24 m/min Subject to errors and omissions, this data is provided without any commitment.

Condition: excellent (used), Year of construction: 2008, HAAS VF-2SSYTCE cnc machining center Year: 2008 Technical details: X axis travel 762mm Y axis travel 508mm Z axis travel 508mm Spindle nose BT 40 Spindle speed max 12000 rpm Power 22.4 kW Tool changer 24 positions Maximum tool diameter 64mm Maximum tool length 279mm Maximum tool weight 5 kgs Table size 914x457mm Maximum weight allowed on table 680 kg Machine weight: 3600 kg Machine dimensions: 2670 x 2600 x 2570 mm Accessories/options: Spiral chip conveyor Inline direct Spindle Drive 12000 rpm spindle Extended Y-travel, 508 mm Digital remote control Prepared for 4.axis ( drive and wiring included ) USB port Coolant tank Under power in our warehouse, possible to test it anytime! Codpezyk N Hsfx Apbsrh

Condition: ready for operation (used), Year of construction: 2005, operating hours: 5,934 h, travel distance X-axis: 406 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 254 mm, controller manufacturer: HAAS, spindle speed (max.): 40,000 rpm, number of axes: 3, This 3s HAAS Super Mini Mill HE was manufactured in 2005, featuring a robust Haas CNC Control and an IBAG Switzerland spindle with a maximum speed of 40,000 rpm. The machine includes an Automatic Tool Changer with a capacity for 18 tools, ensuring efficient operation. If you are looking to get high-quality machining capabilities, consider the HAAS Super Mini Mill HE vertical machining centre we have for sale. Contact us for further details. • Spindle: • IBAG Switzerland spindle • Water-cooled • Tool holder: HSK E32 • Tool changer: • Type: Automatic Tool Changer (ATC) • Capacity: 18 tools • Working hours (from control): Crjdpfx Apsyhfltjbjh • Servo time: 9,158 h • Motion time: 4,984 h • Spindle time: 5,934 h • Idle time: 0:44 h • Electrical data: • Voltage: 360–480 V • Phase: 3 • Frequency: 50/60 Hz • Full load current: 20 A • Largest load: 35 A • Short-circuit interrupting capacity: 10,000 A Technical Specification Taper Size HSK 32

Condition: ready for operation (used), Year of construction: 2023, operating hours: 2,403 h, functionality: fully functional, machine/vehicle number: 1201414, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range X-axis: 1,270 mm Travel range Y-axis: 508 mm Travel range Z-axis: 635 mm Cedpfozl Rzyjx Apbjrh Spindle speed: 12,000 rpm Tool interface: CAT40 Tool positions: 30 MACHINE DETAILS Operating time: 11,136 hours (as of July 26, 2026) Machining hours: 2,403 hours (as of July 26, 2026) Cycle hours: 3,364 hours (as of July 26, 2026) EQUIPMENT Internal coolant supply Renishaw intuitive wireless probe system Mist collector Chip conveyor Approx. 15 tool holders

Condition: like new (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 1110809, HAAS Mini Mill 2 CNC Machining Center – Year of Manufacture 2014 Crodpfx Aezai T Sepboh For sale: a HAAS Mini Mill 2 CNC vertical machining center from 2014. This compact and versatile machine is suitable for precision machining of small to medium-sized workpieces and is widely used in machine construction, supply industries, and general machining. Technical specifications: Manufacturer: Haas Model: Mini Mill 2 Year of Manufacture: 2014 Control: Haas CNC Control Travels (X/Y/Z): approx. 406 x 356 x 508 mm Tool changer: 10 positions Taper: CT40 Coolant system available Special features: The machine was taken out of production approximately 2 years ago and has not been used since. It was fully operational before being taken out of service. The control system has the latest available Haas software update. The machine is offered complete, including standard equipment and tooling. Condition: The machine is in good optical and technical condition. The machine has been fully inspected by a Haas dealer. Availability: The machine is available immediately. Inspection is possible by appointment. Please contact us for additional information, photos, or a price quote.

Condition: good (used), Franz Haas Wafer Stick Baking Oven, Model EWB 1/1, completely refurbished. The machine is constructed from ASIS 304 stainless steel (with the main frame made of carbon steel). The oven is equipped with a rotating ring, which has adjustable speed control to achieve the desired baking characteristics for the wafer sticks. The ring has been cleaned and checked (re-aligned), and the supports/bearings are brand new. Fans have been replaced with new units. Codpjywgaxjfx Apberh The exhaust outlet and flange have been replaced for quick installation. The machine comes with two extruders with bushings for ribbon forming and tube diameter shaping. Equipped with a cutting knife featuring a pneumatic actuator and photoelectric sensor for precise cutting (tube length adjustment is possible). The oven includes a stainless steel batter tank mounted on a frame with a trolley. Fitted with pumps that feed batter from the tank onto the ring surface. Comes with a new control panel and a new gas pressure regulator. Speeds of the ring and pumps are adjustable via frequency inverters. Dimensions: length 3200 mm, width 1400 mm, height 1700 mm. The machine is powered by natural gas, high-methane type, symbol E (previously GZ 50). Electrical requirements: 3x400V / 16A, consumption approx. 2.5/3 kWh. The machine has undergone a complete overhaul. All thermal elements have been replaced with new, environmentally-friendly components—resulting in lower gas consumption and enhanced efficiency. Output: approx. 120-150 kg per 8 hours.

Condition: refurbished (used), Year of construction: 2007, Completely overhauled Haas Multigrind HT grinding machine available in Q1/2027. Used for re-sharpening involute milling cutters / beveloid gear milling cutters / cutting rotors / form cutters / industrial knives / circular knives / spur gears / skiving tools / deep-hole drills, and other workpieces / components. Control system: Siemens 840 D X-axis: 650 mm Y-axis: 400 mm Z-axis: 280 mm A-axis (indexing table): 360° SK50 C-axis (rotary table): 270° X3-axis: electrically driven, with tailstock Grinding spindle: HSK80 (conversion to HSK50 possible) Dressing unit Tool changer: 10-position magazine Coolant system: Turbo Separator Extraction system: LTA CO2 extinguishing system Additional accessories available from the factory Software can be supplied customized according to customer requirements Pre-acceptance at the factory, commissioning, training, and final acceptance at the customer's site Financing / lease purchase possible Modifications possible Csdpfex Tr H Nox Apborh

Condition: used, 20-position tool changer Cedpezz Hqvsfx Apbjrh Operating hours: approx. 5,886 hours Footprint: approx. 1700 x 2500 x 2700 mm

Year of construction: 2016, condition: ready for operation (used), Control Unit Brand HAAS Model Sigma 5 Credpex H Uz Nofx Apbsh Main Drive Number of axis 2 This HAAS TR160 with Sigma 5 was manufactured in 2016. It features a 2-axis table and is equipped with a Sigma 5 servo motor, ensuring precise and efficient operation. Ideal for those looking to enhance their machining capabilities. Contact us for more information. Application Types Other Machine Tools

Condition: good (used), functionality: fully functional, Used Haas grinding machine in good condition, fully functional. Csdpfozdrmhex Apbsrh

Condition: used, Year of construction: 2008, travel distance X-axis: 1,016 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, number of slots in tool magazine: 30, Equipment: chip conveyor, Used Haas VF3YT/50 CNC milling machine. Ideal for precision machining of metals and other materials. Year of manufacture: 2008 Specifications: Axis travel: X-1016mm, Y-660mm, Z-635mm Table: 1372mm x 610mm Rapid traverse rate: 18 m/min Crodpfszwhlgox Apbjh Table load: 1814 kg Spindle taper: SK50 Spindle speed: 7500 rpm Spindle gearbox: 2-speed Spindle power: 22.4 kW Number of tools in the magazine: 30 pcs Machine weight: 7.5 t Dimensions: L x W x H 3.5 x 2.4 x 2.9 m The machine is equipped with: - Renishaw OMP40 workpiece probe - TSC internal spindle cooling - Automatic chip conveyor - Programmable coolant nozzle - Side tool magazine - Rigid tapping - Macro - HSM high-speed machining option - Increased memory up to 16MB It is possible to equip the milling machine with a 4th-axis rotary table. The machine has been serviced, is in good working order and ready for operation. The milling machine can be inspected and tested at our company's premises. If you have any questions or require additional information, please send a message or contact us by phone.

Condition: ready for operation (used), Year of construction: 2017, operating hours: 3,163 h, travel distance X-axis: 1,016 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, controller manufacturer: HAAS, table load: 794 kg, spindle speed (max.): 12,000 rpm, number of axes: 3, This 3-axis HAAS VF-3SS was manufactured in 2017 and features a robust Haas CNC Control. It offers X-axis travel of 1,016 mm, Y-axis travel of 508 mm, and Z-axis travel of 635 mm. The machine supports a spindle speed of 12,000 rpm and a rapid traverse of 30.5 m/min. If you are looking to get high-quality milling capabilities, consider the HAAS VF-3SS machine we have for sale. Contact us for more information. • Machine hours (as shown on the screen): • Power On: 25,416 h • Cycle Start: 8,164 h • Table: • Size: 1,372 × 457 mm • Tool changer: 30+1 positions (side-mount) • CNC control: Haas CNC Control Crsdpox D I Stjfx Apbeh

Condition: excellent (used), Year of construction: 2013, Available end of July. Technology Inline direct drive Speed 12,000 rpm Power 22 kW Tool holder SK40 Tool changer SMTC, 41 positions Technology 2 axes, with counter bearing B-axis -35° / +110° C-axis 360° Clamping surface ø630 x 500 mm Table load (max.) 300 kg Cooling Standard coolant including P-Cool and through-spindle cooling (TSC) Renishaw probe WIPS system with touch probe and tool measurement 8M functions Rotating and scaling 16MB memory storage Codpfx Apeyimnceberh HSM high speed milling Rigid tapping Machine cycle time: 5,446 h Machine power-on time: 21,246 h

Condition: good (used), Year of construction: 2007, functionality: fully functional, Haas TM 1 HE vertical milling machine, year of manufacture 2007, Haas CNC control, travel in X/Y/Z 762/305/534 mm, table size 1213 x 267 mm, spindle speed up to 4,000 rpm, Crodezh Unpspfx Apbeh spindle taper BT 40.

Condition: ready for operation (used), Year of construction: 2019, operating hours: 4,456 h, functionality: fully functional, machine/vehicle number: 1163744, travel distance X-axis: 1,016 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, workpiece weight (max.): 1,814 kg, spindle speed (max.): 10,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel, X-axis: 1,016 mm Travel, Y-axis: 660 mm Travel, Z-axis: 635 mm Spindle speed: 10,000 rpm Rapid traverse rate, X-axis: 18,000 mm/min Rapid traverse rate, Y-axis: 18,000 mm/min Rapid traverse rate, Z-axis: 18,000 mm/min Feed length, X-axis: 1,016 mm Feed length, Y-axis: 660 mm Feed length, Z-axis: 630 mm Feed rate, X-axis: 12,700 mm/min Feed rate, Y-axis: 12,700 mm/min Feed rate, Z-axis: 12,700 mm/min Workpiece length (max.): 1,370 mm Workpiece width (max.): 610 mm Workpiece height (max.): 630 mm Workpiece weight (max.): 1,814 kg Table width: 610 mm Table height: 630 mm Table length: 1,372 mm Table load capacity: 1,814 kg Number of tool positions in the tool magazine: 30 MACHINE DETAILS Operating hours: 20,865 h (as of July 26, 2026) Machining hours: 4,456 h (as of July 26, 2026) Cycle hours: 6,745 h (as of July 26, 2026) Control system manufacturer: Haas Rated power: 45 kVA Torque: 460 Nm Spindle motor power: 44.7 kW Dimensions (L x W x H): 1,370 x 660 x 630 mm EQUIPMENT Chip conveyor with 4 additional feed screws ISO 50 tool holder 30-position automatic tool changer (ATC) RTAP-3 synchronized thread cutting TSC 300 psi (21 bar) Coolant cooler Programmable coolant nozzle MIN QTY LUBE (minimum quantity lubrication) Automatic air nozzle Air cooling through the spindle Renishaw WIPS High Speed Machining ACF 25-micron filter Control cabinet cooler Mist separator 4th axis pre-wired DWO/TCPC Crodpszlxnhefx Apbeh WIFI connection to the local network WIFI camera Automatic door 15 tool holders

Condition: excellent (used), Year of construction: 2001, Haas VF 6/40 TRHE 5-axis machining center Crjdpfxszwulto Apboh Year of manufacture: 2001 X-axis: 1,626 mm Y-axis: 813 mm Z-axis: 762 mm A-axis (table tilting): ±120° B-axis (rotation): 360° Rapid traverse: 15,240 mm/min Feed rate during cutting: 12,700 mm/min Distance from spindle nose to table (min.–max.): 102–864 mm Distance from spindle nose to clamping plate (min.–max.): 279–483 mm Tool changer: 24-position Rotary table: Diameter of clamping plate: 310 mm Max. weight on the clamping plate: 227 kg Chip conveyor Handwheel Internal coolant system High-speed machining Quick code Extended memory 16MB Macro Rigid tapping

Condition: used, HAAS Wood Chip Screening Machine Manufacturer: HAAS Recycling Systems Crsdpfx Apezmfq Sobeh Country of origin: Germany Type: Vibrating chip screen Designed for screening wood chips, bark and biomass materials Suitable for separating fine particles and contaminants Vibrating screening system Multiple material discharge fractions Approximate dimensions: Length: 4.29 m Width: 2.10 m Suitable for woodworking and biomass processing industries

Condition: used, Year of construction: 2012, x-travel 2134 mm y-travel 1016 mm z-travel 762 mm CNC-control HAAS CNC Table dimensions 2134 x 914 mm max. table load 1814 kg spindle taper SK 50 spindle turning speed range 7500 U/min spindle motor 22,4 kW feed range 1270 mm/min rapid traverse 15,2 m/min Codpfsx E Dn Nsx Apbsrh tool change unit 30 Pos. coolant IKZ voltage 400 V weight of the machine ca. 13,2 t dimensions of the machine ca. 4,70 x 2,95 x 2,99 m - Serial No.:1099476 - Year of manufacture 11/2012 - Through spindle coolant TSC - 5-Axis pivotable rotary table HAAS TR310 (as new condition) PRICE FOR MACHINE WITHOUT ROTARY TABLE TR310: 82.000,- EUR