Used Hardness Test for sale (12,608)

Year of construction: 2025, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 54942, No minimum price – guaranteed sale to the highest bidder! EXW – Dismantling and loading must be organized by the buyer! TECHNICAL DETAILS Nominal test force: 50 kN Test stroke: < 1,400 mm Itodpfoz Tf D Rjx Acpjn Usable distance between pressure plates: approx. 800 mm Test area width: 500 mm Test speed: continuously variable 0.001–1,200 mm/min Resolution of displacement measurement: ≤ 0.001 mm Diameter of pressure plates: 246 mm Centering bore: 40 mm Thread: M12 Hardness: ≥ 56 HRC Design: Steel, hardened, rotatable at the top and bottom, lockable at 0° Measuring range of the enveloping circle: 30–250 mm Design: Probe with bearing rollers Measurement: Recording under load MACHINE DETAILS Control system: Control system with control computer Test program: Enveloping circle measurement Network: Fast Ethernet, 100 Mbit/s between the control computer and the separately required operating PC Software delivery: USB stick with installation software Documentation: Version and license status not documented separately Last calibration: 08/04/2025 Dimensions & Weight Machine dimensions: approx. 750 × 900 × 1,950 mm Base frame dimensions: approx. 730 × 900 × 700 mm Control cabinet with control computer dimensions: approx. 600 × 600 × 1,900 mm Machine weight: approx. 490 kg Base frame weight: approx. 50 kg Voltage supply: 3 × 400 V AC, 50 Hz, N + PE Type plate power: 3,000 W Connected power: approx. 3 kVA EQUIPMENT Base frame Control cabinet with control computer Rotatable pressure plates Enveloping circle measuring device with probes and bearing rollers USB stick with installation software Compressed air connection: Pneumatic connection with shut-off valve Note: The functionality has been tested and confirmed. However, an unresolved error message on the drive prevents further use. The machine is in like-new condition visually. The operating PC is not included in the offer.

Condition: used, Hardness testing device, hardness measuring machine, hardness tester, hardness tester Ijdpfob A Rkvsx Acpjtn -Hardness tester: according to Brinell and Rockwell Accessories are missing and therefore it is sold as defective. -Handover in its current condition as inspected -Dimensions: 600/220/H660 mm -Weight: 92 kg

Condition: used, Year of construction: 1962, rockwell hardness . brinell hardness . Hardness tester Rockwell measurement with underframe table all technical data without guarantee Itodpfxowugq So Acpjn

Condition: used, Year of construction: 2007, voltage 400 V current capacity 800 VA frequency 50 Hz weight of the machine ca. ca. 355 kg In our opinion, the machine is in good used condition and can be viewed under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery Iedjxwdxcspfx Acpetn if this is noted in the additional information. Changes and errors in the technical data and information as well Subject to prior sale!

Condition: good (used), 1 used hardness tester Manufacturer: Mitutoyo Model: Wizard 810 208 D Testing methods: Itodoxup Uwspfx Acpen Rockwell Brinell

Year of construction: 1990, condition: good (used), Hardness tester, hardness tester, material testing machine make FRANK type 38533 Serial number 17024 year of construction ca.1990 test chamber height 220 mm projection 150 mm Isdpfx Acjn Snkkspetn

Condition: good (used), Manufacturer: WMW WPM Material Testing Machines Leipzig Year of manufacture: Model: Test method: Table diameter: 200 mm Support diameter: 100 mm Itjdey Hka Uepfx Acpon Throat depth: mm Test height: 300 mm Spindle diameter: 50 mm Test force: 15.5 to 250 kg Accessories: Weight: 130 kg Footprint: 500 x 200 mm Dimensions: 500 x 300 x 730 mm Condition: good

Condition: excellent (used), For sale: Professional automatic Vickers hardness tester Mitutoyo HV-100, made in Japan, in excellent technical and visual condition. The device is equipped with the AUTOVICK automatic measurement system and the Mitutoyo Vision Unit, enabling fast, repeatable and fully automatic hardness measurements without operator subjectivity. Intended for measurement laboratories, quality control departments, manufacturing plants, automotive, aerospace, and toolmaking sectors. Itodpez Slltjfx Acpon —— Key information • Measurement method: Vickers (HV) • Model: HV-100 (series HV-100B / HV-100C / 100D) • Load range: up to 100 kgf • Automatic AUTOVICK system • Integrated Mitutoyo Vision Unit • Automatic impression recognition and HV calculation • Made in Japan • Power supply: 230 V • Stable, heavy-duty laboratory construction —— Technical condition • Device operational and complete • Very good visual condition • Regularly used in an industrial environment • Last technical inspection: 2020 • Ready for immediate operation after connection —— Included in the set • Mitutoyo HV-100 hardness tester • Vision Unit (measuring camera) • AUTOVICK automatic system • Set of weights • Original accessories and holders • Transport cases with equipment • Original Mitutoyo documentation and manuals • Weight: 65 kg

Condition: used, Hardness tester, hardness measuring machine, hardness tester, impact hardness tester Itsdjhck U Sjpfx Acpjn -Handover: in its current condition as inspected -Tool set: incomplete -Hahn & Kolb: mobile hardness testing device -Individual components: see photos -Box dimensions: 355/190/H95 mm -Weight: 5.4 kg

Year of construction: 2021, condition: new, THE classic among the universal hardness testers with swivel system with motorized change between indenter and objective Standard accessories (included in the price): * Hardness testing machine with integrated load cell Load system, optical unit * video measuring system: WINDOWS test software IMPRESSIONS * objetives for 95x and 150x magnification * clamping cap * test table flat Ø 80 mm Itsdocw Iyhspfx Acpjn * Installation and operating instructions * certificate of inspection * incl. action accessories: - ring light for Brinell measurements - ISO / ASTM - certified Vickers and Rockwell indenters plus packaging, transport with commissioning on site plus optional equipment

Year of construction: 2025, condition: new, Top technology at a fair price! Itodpfx Acscxvbbepjn The FALCON 500 series is a new generation of micro-Vickers / Macro-Vickers / micro-Brinell hardness testing machines with an integrated load cell.

Condition: used, TECHNICAL DETAILS - Durometer for production line control of soft rubber and elastomers and all natural rubber products. Itsdpfjuhb I Isx Acpjn

Condition: used, TECHNICAL DETAILS - Brinell tests 3000 Kg and 750 Kg, HB according to DIN EN ISO 6506-01 - Test height with table : 0 - 610 [mm] - Test height without table : 370 - 1.120 [mm] - Clamping surface on table : 500 x 600 [mm] - Clamping surface on sole : 810 x 1.425 [mm] - Reach : 310 - 1.095 [mm] - Arm swiveling : 220 [°] - Test group swiveling around its axis : 180 [°] - Vertical stroke of the test group : 750 [mm] Itedpfxeuhb Iuo Acpsn - Floor space (except hydraulic unit) : 810 x 2.155 [mm] - Height : 3.500 [mm] - Weight : 4.000 [kg] - Voltage : 3x 400 [V] - Frequency : 50/60 [Hz] - Installed power : 3,5 [kVA] EQUIPMENT - Control panel : Stiefelmayer - Optical measuring system : Zeiss - Measuring electronics HM-Control - 2 measuring rules of imprint size : Heidenhain - Warning lights : good / outside the tolerance range - Statistic function - Exit for PV printing - Table - Hydraulic unit

Condition: excellent (used), Impact hardness tester Design according to Professor Baumann Type: No. 523 Operating manual available Iodpfx Aod R Rhwecpotn Dimensions of the case: L. 380 x W. 220 x H. 95 mm Weight: 5.5 kg

Year of construction: 1982, condition: used, Technical details: z-travel: 260 mm pressure capacity max.: 49 - 7355 (Prüflast) N checking height: 260 mm workpiece weight: max. 160 kg throat: 200 mm interface: RS 232 voltage: 230V / 50Hz V total power requirement: 200 VA machine weight approx.: 250 (ohne Unterschrank) kg dimension machine xH: 0,7x 0,6 x 1,8 (mit Unterschrank) m The hardness tester with depth measurement operating mode is on sale with a base cabinet from Emco for hardness testers. The device is suitable for testing the following methods(Specifications according to manufacturer): Metals according to Brinell, Vickers, Rockwell Plastics testing according to DIN 53 456 Other materials for testing only after consultation with the manufacturer. Test loads: electronically controlled via microprocessor, DMC and DC motor for M4R-075 = 49 to 7355 N Test table height adjustable via handwheel; Ø 90mm Test bench mounting according to DIN 51 225 = Ø 25mm Ijdpou N Avxefx Acpjtn Operation and programming via control panel accessories: a few test tables and plates (comparable with the pictures) *

Year of construction: 1990, condition: used, Universal hardness testing machine High-quality general overhaul with warranty Itsdpfx Aeptcyecpsn Optional modernization for Vickers, Brinell, and Rockwell testing with PC connection

Year of construction: 1970, condition: used, Technical details: x-travel: - mm y-travel: - mm z-travel: - mm workpiece weight: 800 kg machine weight approx.: 0,75 kg dimension machine xH: 1,2 x ,08 x 2,0 m The impact toughness is a measure of how resistant a material is to sudden, impact loads, especially when it has a notch (kerf) beforehand. It is mainly used for metals to assess fracture toughness under dynamic loading. * Ijdpfxexu Dwys Acpjtn

Year of construction: 2023, condition: like new (used), machine/vehicle number: 530211, Properties: → robust machine housing made of cast iron → automatic loading and unloading of the test force → change between lens and indenter automatically → LED lighting → digital measuring eyepiece → LCD color display touch screen → Conversion to other hardness scales (e.g. HRC) → easy to use Technical data: → Test loads in kg (0.3 / 0.5 / 1 / 3 / 5 / 10 / 20 / 30) → Test method Vickers → Eyepiece 10X → automatic Revolver → Objectives 10X / 20X / 40X → Test force application 50µm/sec → height Capacity max. 210mm → depth Capacity max.160mm → Conformity: DIN EN ISO 6507 / ASTM E-384 → Weight approx. 75kg → Power supply 230V / 50Hz Standard delivery: → Hardness tester → Diamond indenter 136° Vickers → Flat Anvil Ø80mm → V-Anvil Ø80mm → Eyepiece → Objectives 10X / 20X / 40X → LED lighting → Power cable → Accessory case → Operating instructions OPTIONALS: → VMS3-Software (Video-Measuring-System) → X/Y-Stage 200x200mm (Movement 25 x 25mm) → Digital micrometer (to transmit the edge distance to the VMS3-Software) → “Automatic measurement” module Ijdpfxoc Ipc Us Acpotn (only in combination with VMS3-Software)

Condition: like new (used), Year of construction: 2021, OMAG AFFRI WIKI 90 JS-C – Automatic Vickers/Knoop Hardness Tester | 2021 | Excellent Condition For sale is a professional, automatic OMAG AFFRI WIKI 90 JS-C hardness tester from the renowned Italian manufacturer, AFFRI. The unit is from 2021, is fully functional, complete, and ready for operation. This hardness tester is designed for precise hardness measurements of materials in quality control laboratories, research and development departments, and manufacturing plants. It is equipped with a digital measuring system with a camera and a computer with dedicated software that enables automatic analysis of indentations. Technical Specifications * Manufacturer: OMAG AFFRI (Italy) * Model: WIKI 90 JS-C * Year of manufacture: 2021 * Condition: very good, fully functional * Power supply: 115–230 V * Weight: approx. 70 kg * Made in: Italy Equipment * Control computer with software, * Digital measuring system with camera, * XY measuring table, * Complete cabling, * Emergency stop switch, * Ready for immediate operation. Application Iodszkpptspfx Acpotn The device is ideally suited for hardness measurements using the following methods: * Vickers (HV), * Knoop (HK), * (depending on the configuration, also other measurement methods). Ideal for laboratories, the automotive and aerospace industries, toolmaking, and quality control. Please send a specific price offer.

Condition: as good as new (ex-display), Year of construction: 2018, - Mobile hardness testing device for almost all application areas Standard scope of delivery: - MKII hardness testing device - Diamond indenter - Indenter protection - HRC hardness comparison plate (without test certificate) - HRB hardness comparison plate (without test certificate) - Holder for flat and round components - Power supply - Sturdy storage case - Operating manual The current data sheet is available on our website. Iedpsdzzvzjfx Acpstn

Year of construction: 2021, condition: new, New universal hardness testing machine with excellent European quality (Netherlands) and a price-quality ratio approx. 1/3 cheaper than the established suppliers. One of the most flexible universal hardness testers / hardness testing machines available on the market with an integrated turret head for holding several penetrators and lenses Standard accessories (included in the price): * Machine body with mot. turret * Linear actuator (lowering test head) * Load cell, closed loop * Optical measuring system with up to 3 lenses with 0.7 to 1000x magnification * Optical LED illumination and LED ring light illumination * Laser pointer for exact test position determination * Built-in industrial PC with 15" industrial colour touch screen * Installation and operating instructions Ijdpfx Acocw Iy Hspotn * incl. action accessories: - ISO / ASTM - certified Vickers and Rockwell penetrators plus packaging, transport with commissioning on site plus optional equipment

Year of construction: 2023, condition: as good as new (ex-display), machine/vehicle number: 520511, Features: → Robust machine housing made of cast iron → Automatic application and release of the test force → Automatic switching between objective lens and indenter → LED illumination → Digital measuring eyepiece → LCD color touchscreen display → Conversion to other hardness scales (e.g., HRC/HB) → Simple operation Technical Data: → Test loads in grams (10 / 25 / 50 / 100 / 200 / 300 / 500 / 1000) → Testing method according to Vickers → Cross table 110 x 110 mm / travel range 25 x 25 mm → Eyepiece 10X → Automatic objective turret → Objectives 10X / 40X / 60X → Max. specimen height 90 mm → Max. specimen depth 110 mm → Compliance: DIN EN ISO 6507 / ASTM E-384 → Weight approx. 50 kg → Power supply 230V / 50Hz Scope of delivery: → Hardness testing device → Diamond indenter 136° → Cross table 110 x 110 mm → Eyepiece 10X Isdpfxoc Ipcks Acpjtn → Objective turret → Objectives 10X / 40X / 60X → LED illumination → Power cable → Accessory case → Operating manual OPTIONAL → VMS3 software (Video Measuring System) → Digital built-in measuring screw (for transmitting the edge distance to the VMS software) → Module "automatic measurement" (only in conjunction with VMS3 software) → PC system / monitor

Condition: good (used), Lever-type measuring device, dial gauge, probe, centering device, 3D probe, probe insert for hardness tester, hardness measuring machine, hardness tester, universal hardness testing machine, Rockwell hardness tester -Spare part: Rockwell dial gauge for hardness tester type Testor HT -Diameter: 130 mm -Height: 50 mm Ijdjfbyc Ajpfx Acpjtn -Weight: 0.6 kg

Condition: refurbished (used), functionality: fully functional, Testing method: Vickers Testing forces: HV0.2 / 0.3 / 0.5 / 1 / 2 / 3 / 5 / 10 Scope of supply: - Hardness testing device - Diamond indenter 136° Vickers - LED lighting - Cross slide table 135 x 135 mm - Objective revolver Itodpfx Ajdmz Uzecpon - Objectives 20X / 40X / 60X Optional: - VMS3 (Video Measuring System) - Digital micrometer screw - PC system

Condition: good (used), Stock number: 2938 Manufacturer: Wolpert Year of manufacture: 1960 Type: Testor HAT 1E Test method: Rockwell 150 kg Brinell 250 kg (?) Table diameter: mm Projection: 125 mm Test height: 200 mm Iedpfx Acjvcbu Ajpetn Accessories: Machine is without table Weight: approx. 70 kg Machine dimensions: 200 x 400 x 700 mm Condition: good