Used Head Lathe for sale (14,556)

Condition: ready for operation (used), Year of construction: 2003, operating hours: 4,256 h, functionality: fully functional, turning length: 570 mm, turning diameter: 176 mm, travel distance X-axis: 245 mm, travel distance Z-axis: 570 mm, controller model: MSG-805 V, TECHNICAL DETAILS Turning diameter: 176 mm Turning length: 570 mm Swinging diameter: 510 mm Machining diameter: 420 mm Travel X-axis: 245 mm Travel Z-axis: 570 mm Rapid traverse X/Z-axis: 24 m/min Spindle bore: 43 mm Spindle speed: 60–6,000 rpm Tailstock diameter: 85 mm Tailstock travel: 120 mm MACHINE DETAILS Control system: MSG-805 V Total power requirement: 5.5 kW Dimensions & Weight Footprint: approx. 2,000 × 1,700 × 1,800 mm Machine weight: approx. 3,400 kg Operating hours: 4,256 h EQUIPMENT Integrated CNC control system Inductively hardened flat guides for bed and cross slide Continuously variable AC main spindle drive Programming of constant cutting speed Integrated cold light Power meter for main spindle drive Operator controls for automatic and manual operation CNC programming and control panel Tailstock with hydraulically actuated quill, MK 4 Continuously variable quill pressure Programmable actuation of the tailstock quill via toggle switch and M function High-dynamic three-phase servomotors for X and Z axes Backlash-free, pre-tensioned precision ball screws for X and Z axes Automatic central lubrication with electrical monitoring Coolant system with tank, pump, lines, and nozzle Electric 12-station turret system MORI SEIKI Itedpfx Aozul Tvsn Njk Automatic direction logic on the turret Direct coolant supply through the turret disk Fixed hydraulic unit for power chuck Full enclosure of the work area Front sliding door with large viewing window Electrical preparation for chip conveyor Electrical equipment according to VDE 0113 Data interface V.24 / RS-232-C Mounted control cabinet Freestanding transformer: 400 V / 200 V

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Technical details faceplate diameter 1800 mm swing diameter 2000 mm turning height 1270 / 1120 mm Control SIEMENS 840 D workpiece weight max. 5000 kg ram head dimension 250 x 250 mm table turning speeds 1 - 320 U/min cross rail - adjustment 400 mm ram head - cross travel (X) -2770 / +2275 mm ram head - vertical travel (Z) 1250 mm c-axis 360° (0,001°) deg milling drive 37 kW turning speed range - milling 10 - 3000 U/min power capacity - table 100 kW Torque 31784 Nm feed range (X/Z) 0,1 - 15000 mm/min weight of the machine ca. 55 t Additional information Used CNC vertical lathe for turning, drilling and milling First machine installation in the year 2011. The machine was meticulously maintained by the previous owner. It was sold due to a factory closure Max. workpiece diameter: 2040 mm Max. workpiece height: 1270 mm Ram stroke: 1250 mm Max. workpiece weight: 5000 kg (per pallet/chuck) Itsdpfxezr D Tco An Njk Table speed range: 1.0 - 320 rpm Table drive motor: 100 kW Drilling and milling spindle: 37 kW Crossbar travel: 2 steps of 200 mm each Total electrical connection value: 218 kVA CNC control: Siemens 840 D Number of NC axes: 4 (X, Z, C, crossbar adjustment) Travels: X-axis: -1650 to + 2165 mm Z-axis: 1250 mm Rapid traverse X- Z-axis: 15 m/min Number of tool magazine spaces: 80 spaces in the chain magazine, of which 60 x HSK 100 and 20 x Capto C6 Disc magazine 12-pos. for rotary holders and attachment heads Coolant system with filter and circulation unit Chip conveyor Oil-mist-extractor 1 pallet with jaws, diameter 1800 mm 1 hydraulic chuck with base jaws, diameter 1800 mm Various drilling and milling heads 2 measuring probes Several turning tool holders Special feature: Pallet changer with two stations, equipped with a face plate Ø1800 mm and a six-jaw lever compensation chuck with mechanical centrifugal force compensation Ø1800 mm. Note: The machine is in a pit. Condition description: The cross roller bearing on the Carnaghi was replaced about half a year ago. The Siemens components in the control cabinet were also completely replaced at the end of 2023. The machine also has a measuring probe for tool measurement and an external Renishaw measuring probe for workpiece measurement. As a special feature, the machine also has a measuring probe installed on the Z-axis (Z1-axis). This brings an advantage in terms of accuracy and time, as the tool does not have to be put down for measuring. However, it is currently shut down and should be overhauled when it is put back into operation. The machine also has a Rotomors six-jaw lever compensating chuck with centrifugal force compensation, which was completely overhauled in 2020/21.

Condition: used, Year of construction: 1998, Control Siemens 840 D swing diameter over slide rest 650 mm Itjdox I Simepfx An Nsk max. turning speeds 3800 min/-1 spindle diameter in front bearing 150 mm spindle bore 92 mm spindle head A8 DIN55026 number of tool places 2x 12 Pos. tool taper VDI 40 weight of the machine ca. 7,0 t In our opinion, the machines are in good used condition Condition and can be viewed under power by appointment. Technical features: - Nominal length: 1500 mm Accesories: - chip conveyor - Felsomat loading system - lathe chuck - milling body There are 2 identical machines available. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well Subject to prior sale!

Condition: used, Technical details: spindle passage: 60 mm turning length: 45 mm turning diameter: max. 56 mm drill depth: max. 70 mm revolution per minute: 48 - 1500 (spindle) U/min threading: Drehzahl: 24 - 750 U/min tool turret - number of stations: 8 total power requirement: 5,5 kW weight of the machine ca.: 2,4 t space requirement of the machine approx.: L:2,1x1,0x1,8 m Cam-controlled automatic lathe according to template. Workpiece is clamped via clamping cartridge. Turret head: disk turret Hahn&Tessky Esslingen, tool path 80mm, adjustment 36mm, distance collet/turret head min./max.: 72/188mm 2 pieces turning support, working stroke 45mm 2 piece cutting off support, working path approx. 40mm Cooling water system Machine is not connected. Sale at a low selling price. Isdpeu Iwyijfx An Netk *

Condition: used, This listing is for the Watson Marlow 313DW Peristaltic Pump Head The unit is in full working condition and is ready for immediate release Key Features The Watson-Marlow 313DW is a single-channel, rapid-load peristaltic pump head designed for laboratory and industrial fluid handling applications. It is part of the 300 Series, known for their flip-top design that facilitates quick and easy tubing changes. Key Features High Flow Rate: The 313DW model is equipped with a three-roller mechanism, enabling a maximum flow rate of up to 2,000 mL/min when using 1.6 mm wall thickness tubing. Tubing Compatibility: Accepts standard 1.6 mm wall thickness tubing with bore sizes ranging from 0.5 mm to 8 mm, offering flexibility for various applications. Durable Construction: The pump head is built with a glass-filled polypropylene back; IXEF front; glass-filled nylon rotor, clamps, and mounting plate; and MoS₂-filled nylon rollers. These materials ensure strength, chemical resistance, and long service life. Roller Options: Choose the three-roller model for high-flow applications or the four-roller model for smoother flow and reduced pulsation. Extension Capability: Add up to five extension pump heads, depending on the type and size of tubing used. Note: The number of extension pump heads allowed depends on the type and size of tubing being used. Warranty: Includes a 1-year manufacturer warranty for quality assurance. Itedpfxjxv Apwj An Njk Applications Chemical Processing: Ideal for accurate, contamination-free chemical transfer. Biotechnology: Suitable for sterile fluid handling. Food and Beverage: For transferring additives, colorants, and ingredients. Water Treatment: Used in dosing and chemical feed systems

Condition: used, Year of construction: 2005, Technical details: spindle passage: 36 mm Article: CNC-controlled multi-spindle automatic lathe Manufacturer: Schütte Type: A36PC Yob: 2005 Loading magazine by Pietro Cucchi Knoll unit Iodpfx Anszg Aw Ns Njtk 7 radial cross-type carriages 2 additional speed motors in 4th and 5th positions 2 additional speed motors for front spindles in position D (pick-up) and B (for front motorized spindle) 1 polygon cutter 1 motorized front spindle 1 radial motorized in position IV for cross-type carriage 1 radial motorized in position V to be mounted on X-type carriage only (no cross-type carriage) 1 straight head for motorized position IV 1 90-degree tilted head for motorized position IV 1 tilt-adjustable head for motorized position IV Please, contact us for getting more information and pictures on mail(at) or *

Condition: new, Year of construction: 2018, functionality: fully functional, Standard technical data: Swing diameter over bed: 580 mm Swing diameter over carriage: 470 mm Maximum machinable diameter: 360 mm Max. workpiece length: 250 mm Traverse (X): 260 mm Traverse (Z): 350 mm Traverse (Y): 100 mm (+/- 50) C axis: 360 degrees (0.001-degree increments) Spindle speed: 50-6,000 rpm Spindle nose: JIS A2-6 Spindle bore diameter: Ø62 mm Front spindle bearing diameter: Ø100 mm Turret type: M-V12 Number of tools: 12 Tool size: 20x20 mm Tool shank diameter: Ø32 mm Tool change time: 0.1 sec Driven tool speed: 45-6,000 rpm Rapid traverse (X): 25 m/min Rapid traverse (Z): 30 m/min Rapid traverse (Y): 12.5 m/min Main motor power (15 min/continuous): 11/7.5 kW (PREX) Driven tool motor power: 5.5/3.7 kW (PREX) Machine dimensions (L x W x H): 2,020 x 1,734 x 2,250 mm Machine weight: 4,050 kg Control: OSP P300L Standard specification: 1 OKUMA CNC Lathe Model LB2000 EXII MYC with OSP-P300L CNC Controller, including CE mark & EMC 1 set European Standard Specification 1-1. V12 radial turret head, 1 set 1-2. Spindle, 1 set (1) Spindle speed: 50-6,000 rpm (1 set) (2) Spindle motor PREX 11/7.5 kW (1 set) (3) Spindle: JIS A2-6; bore Ø62 mm (1 set) (4) C-axis control, 360 degrees (0.001-degree increments) (1 set) (5) SR1146 hydraulic cylinder for chuck (1 set) 1-3. MT4 tailstock 1-4. Dual-action foot pedal for chuck and tailstock side, 2 sets 1-5. Driven tool motor PREX 5.5/3.5 kW (2 min continuous) 1 set Itodpfx Ajy H H Afen Nok 1-6. Driven tool speed: 45 - 6,000 rpm, 1 set 1-7. Work area lighting, 1 set 1-8. Full enclosure, 1 set 1-9. Chip tray, 1 set 1-10. Door interlock, 1 set 1-11. Lubrication monitoring, 1 set 1-12. Automatic chuck open/close on main spindle, 1 set 1-13. Chip air blow, 1 set 1-14. Foundation bolts, 1 set 1-15. Tool setter, 1 set 1-16. CE marking, 1 set 1-17. IEC standard compliance, 1 set 1-18. Transformer, 1 set 1-19. Coolant system with 250W pump, 1 set 1-20. OSP-P300L CNC control with 15" color touchscreen monitor, 1 set 1-21. OSP-P300L Advanced One Touch IGF-M-E kit specification (1 set) * Multitasking machines coordinate conversion (1 set) * Multitasking machines profile generation (1 set) * Advanced One Touch IGF (graphical programming assistant with dialogue-based interface) (1 set) * Real 3D simulation (1 set) * Cycle time monitoring (1 set) * Load monitor (1 set) * NC operation monitor (1 set) * Cycle time reduction function (1 set) * Hi-Cut Pro (machining-specific servo optimization) (1 set) * Variable spindle speed control (1 set) 1-22. 2-stage position indicator lamp, 1 set 1-23. Program storage: 2GB, 1 set 1-24. Operation memory: 2MB, 1 set 1-25. Spindle orientation, electric, 1 set 1-26. Inch/metric conversion, 1 set 1-27. Ball screw pitch error compensation on X/Z axes, 1 set 1-28. Workpiece ejection monitoring, 1 set 1-29. Lifting hooks, 1 set 1-33. TAS-C thermal compensation on the frame 6” chuck Chip conveyor

Condition: used, Hardinge HLV-H High Speed Super Precision Tool Room Lathe Max’ Distance Between Centres 18” Max’ Swing over Bed 11” Max’ Swing Over Carriage 9” Max’ Swing over Cross Slide 6” Spindle Capacity: Though Spindle - 1 1/4” 5C Round Collets - 1 1/16” 5C Hex Collets - 7/8 Itjdpfoy Nfqmox An Nok 5C Square Collets - 3/4” With Step Chucks – 1 1/16” to 6” With Jaw Chuck (Through Spindle) - 1 5/32” With Expanding Collets 3” Variable Spindle Speeds - 125 to 3000 rev/min Tailstock M/T 2 3 Phase Electrics Net Weight (approx.) 750Kgs Supplied with: 2 Axis Digital Readout 4 Jaw Chuck Faceplate 3 off Multifix Tool Holders Set of Misc’ 5C Collets For Sale Jet Machinery Ltd Jet Machinery Stock No: #79017 Machine Serial Number: HLV-H14793T Cost: £8,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: like new (used), functionality: fully functional, Weiler Commodor guide and feed spindle lathe with 3-axis digital display K&C NEW Overhauled with acceptance certificate for tolerances of new machines Technical data: >> Machine no. 1824 >> Center height 180 mm >> Center width 1000 mm >> Spindle speeds: from 13 to 2000 rpm >> Spindle passage 56 mm >> Short taper spindle head DIN 55029 size 5 >> Tailstock MK 4 >> Feed rates from 0.026 to 0.888 mm / rev >> Possible threads metric, inch, module and diametric pitch >> Metric thread pitches from 0.35 to 12 mm >> Weight approx. 1500 kg >> Spindle brake can be switched on >> Drive power 2.0/4.0 KW >> Length 2.2 m, height 1.5 m, depth 1 m Accessories and equipment: >> 3-axis digital display from K&C New, 12-month manufacturer's guarantee with operating instructions Functions: Switching mm/inch, coordinate selection ABS/INC, halving of the display value, reference mark, tool programming 200 pcs., cone calculation, radius / diameter, quick zeroing, switching of the counting direction, >> Three-jaw chuck wedge bars as good as new 200mm 1 set of jaws >> Mulifix size B with 2 pcs steel holders NEW >> Bed stop >> Machine feet >> Coolant system >> LED machine lamp For safety, the machine is equipped with: >> Electronic spindle protection >> Spindle brake >> 2 emergency stops On request: covers for the guide. and feed spindle About the machine: A Weiler Commodor guide and feed spindle lathe is offered in a geometrically overhauled condition. The guides have been reground or re-scraped. With acceptance according to the test report. 2K glossy white paint. The Multifix and chuck accessories are new. Iodpfx Aovrcqden Nstk For safety: The machine has a brake motor, electronic spindle protection and two emergency stops - an absolutely new lathe. Even at high speeds, the Weiler runs very quietly. This new generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to view this machine on site under power and see for yourself its condition.

Condition: good (used), Year of construction: 2000, functionality: fully functional, Ge Fanuc control 3 jaw 10 inch Pratt and Barnet manual chuck 10HP spindle Quick change tool post Itsdpfxszakk Eo An Nok Tailstock Coolant tank and tray 6 tool holders

Condition: excellent (used), functionality: fully functional, spindle bore: 40 mm, turning length: 1,016 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 67 rpm, Colchester Master 2500 40" between centres Spindle speeds 30-2500rpm Imperial dials 2 axis DRO Coolant pump and system Morse taper 3 tailstock Spindle bore 40mm Quick change tool post Comes with 4 jaw 10" Ijdjzphivspfx An Nstk 3 jaw with reverse jaws 8" 12" face plate Drive dog plate 4 x quick change tool holders

Year of construction: 2016, condition: ready for operation (used), - USED - 7-AXIS TWIN-SPINDLE CNC LATHE MAX ROTATING DIAMETER: 800 mm MAX TURNING LENGTH: 350x2 mm MAX TURNING DIAMETER: 300 - 390 mm BAR CAPACITY: 76 mm SPINDLE: 3500 rpm; 22-26 kW; ASA A2-8 Iodpfjyyd Ulsx An Njtk COUNTER SPINDLE: 3500 rpm; 22-26 kW; ASA A2-8 X1-AXIS TRAVEL: 255 mm X2-AXIS TRAVEL: 190 mm Y-AXIS TRAVEL: ± 60 mm Z1-AXIS TRAVEL: 800 mm Z2-AXIS TRAVEL: 900 mm RAPID FEEDS X-Y-Z: 20 - 7,5 - 24 m/min DRIVEN TURRET HEAD: 12 ; 12 POS; 4000 ; 4000 rpm; 5,5 ; 5,5 kW CONTROL UNIT: FANUC 31i-B WEIGHT: 12700 Kg OVERALL DIMENSIONS: 4050 x 2210 x 2480 mm ACCESSORIES: SWARF CONVEYOR ; PIECE CONVEYOR ; TOOL SETTER

Condition: ready for operation (used), Year of construction: 2012, XYZ SLX555 x 3m ProtoTRAK Control Gap Bed Centre Lathe ProtoTRAK SLX Control (2012) Max. Distance Between Centres 3000mm Max. Swing over Bed 560mm Max. Swing over Gap 935mm Max. Swing over Cross slides 350mm Max. Cross slide Travel 290mm Spindle Nose D1-11 Spindle Bore 104mm Spindle Speeds 30 – 1800rpm Spindle Motor 15Hp Quick Change Tool Post Tailstock MT7 Tailstock Dia’ 75mm Tailstock Travel 160m Manufactured | 2012 Dimensions: L x D x H 5220 x 2150 x 1950 mm Weight 7400 kg Supplied with: 3 Jaw Chuck Itodpfxoyaywhj An Njk Machine Handbooks TRAKing®. Constant Surface Speed. Rapid Traverse with Joy Stick. QCTP & Holders 2 x Fixed Steadys 15” Interlocking Guards Auto Lubrication. Coolant. Worklight We can offer delivery & installation, operator training and warranties. *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79024 Machine Serial Number: SLM00035 £47,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: like new (used), functionality: fully functional, Weiler Praktikum 160B precision center lathe 3-axis digital display K&C NEW. Reconditioned with acceptance certificate for tolerances of new machines Technical data: >> Machine no. 87 160 760 >> Center height 160 mm >> Center width 650 mm >> Spindle speeds: from 24 to 2500 rpm >> Spindle passage 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock Ijdpevrdlcjfx An Notk >> Tailstock MK 3 >> Feed rates from 0.02 to 0.63 mm / rev >> Possible threads metric, inch, module and diametric pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight approx. 680 kg >> Spindle brake can be switched on >> Length 1.6 m, height 1.25 m, depth 0.7 m Accessories and equipment: >> 3-axis digital display from K&C New, 12-month manufacturer's guarantee with operating instructions Functions: Switching mm/inch, coordinate selection ABS/INC, halving the display value, reference mark, tool programming 200 pcs., cone calculation, radius / diameter, quick zeroing, switching the counting direction, >> Collet device New, collets NEW from 3 to 25 mm, 1 mm increasing >> Three-jaw chuck 160 mm New with 2 sets of jaws >> Mulifix size A with 3 steel holders >> Electronic spindle protection >> Machine lamp LED New >> Machine feet NEW >> Splash guard >> Operating instructions, spare parts plan (PDF) About the machine: Offered is a Weiler Praktikum 160 B guide and feed spindle lathe with toolmaker precision in a completely geometrically overhauled condition. Reconditioned with acceptance certificate for tolerances of a new machine. For safety: Electronic spindle protection of the work spindle, cover of the lead and feed spindle, 2 emergency stops and a brake motor. This new generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to view this machine on site under power and see for yourself its condition.

Condition: used, Year of construction: 1990, functionality: fully functional, Fanuc OT control 3 jaw Kitagawa chuck 620mm swing 1000mm between centres 10 station turret Tailstock Coolant pump and tank Swarf conveyor Itedpfxszakgtj An Nek

Condition: excellent (used), Year of construction: 2012, Colchester Student 2500 Gap Bed Centre Lathe (2012) Ex Research Machine Super Condition Swing over Bed 330mm Swing in Gap 480m Swing Over Cross Slide 210mm Distacne Between Centres 635mm Spindle Bore 40mm Spindle Nose D1-4 Spindle Speeds 40 – 2500rpm Spindle Power 2.2kW Supplied with: 3 Jaw Chuck with Forwards and Reverse Jaws Tool Holders as Picures QCTP Coolant Tool Box 5C Collet Chuck Chuck Keys 3 Phase 415V Electics For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #79230 Machine Serial Number: 308029 Cost: £7,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Iedjy U Rtwopfx An Nstk Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Webster & Bennett 72” CNC Elevating Rail Vertical Turning & Boring Machine Fanuc control Tool changer Table Size 72” Machine swing 84” Itedpfx Aozrpmujn Njk Table speed Range 3.8 to 150 rpm. Feed range .156mm to 7.5mm per rev. Max Height under cross slide 48” Max Height under turret 48” Ram Travel 38” Main motor 50hp Fully interlocked guards with swarf conveyor

Condition: used, Table Size 72” Machine swing 84” Table speed Range 3.8 to 83 rpm. Feed range .005” to 0.250” per rev. Max Height under cross slide 48” Max Height under turret 48” Ram Travel 38” 4 Std jaws Ijdpfxjzkkcuo An Njtk Main motor 40hp Newall 2 Axis Digital Read Out

Condition: used, Year of construction: 2022, turning diameter 420 mm turning length 1350 mm spindle passage 101 mm control Siemens SL 828D ShopTurn number of controlled axis 4 turning speed range 3000 U/min power requirement 22/18,5 kW rapid speed 30 m/min number of tapers in turret head 12/24 BMT 65 Ijdpfszfqf Sjx An Nstk number of driven tools in turret 12 BMT 65 Spindel speed of driven tools 5000 U/min Spindelpower on driven tool 7,5/5,5 kW y-axis +/- 65 mm tail stock MT-5 weight 8,0 t dimensions 5,7 x 2,3 x 2,32 m Heavy CNC- lathe with driven tools and Y- Axis in very good condition. First instalation: 03/2023 Appr. 5400 h Power on. - 2x 3-jaw chuck Ø 325 + 400 mm - some fixed tool holders - Tool pre- setter - chip conveyor - 4x driven tool holders - 2 + 2 driven toolholders with Capto C4 - oildust collector - band filter system with appr. 1000 ltr. - hydr. steady moveable wit turret SMW Autoblock SLU-X3.1 (Ø 20- 165 mm) - 3 colour signal lamp - coolant gun - some jaws - external programming system MCS40501/2 - build in spindle

Condition: used, Year of construction: 2008, turning diameter 250 mm turning length 400 mm control Siemens 840 D swing diameter max. 300 mm workpiece length - max. 400 mm travel -x axis 280 mm feed in x - axis - 30 m/min rapid traverse X-axis 30 m/min travel -z axis 1150 mm feed range Z-direction mm/min rapid traverse Z-axis 60 m/min spindle bearing diameter 90 mm spindle head DIN 55026 - Size A6 turning speeds 1 - 5000 U/min tool taper Capto C4 total power requirement 45 kW weight of the machine ca. 11 t Ijdpfxsynbcbs An Netk dimensions of the machine ca. 7,0 x 5,0 x 3,2 m CNC lathe with SIEMENS SINUMERIK 840D control; Screw conveyor with chip breaker and return pumping station; NC-steady SMW-SLU-1-OLD Ø10-70mm; 12-fold tool turret SAUTER 0.5.460.220; NC tailstock; Artis monitoring; Pickup-loading incl. conveyor. Without coolant system, was connected to central supply. Machine can be inspected under power.

Condition: used, Year of construction: 2008, turning diameter 250 mm turning length 400 mm control Siemens 840 D swing diameter max. 300 mm workpiece length - max. 400 mm travel -x axis 280 mm feed in x - axis - 30 m/min rapid traverse X-axis 30 m/min travel -z axis 1150 mm feed range Z-direction mm/min rapid traverse Z-axis 60 m/min spindle bearing diameter 90 mm spindle head DIN 55026 - Size A6 turning speeds 1 - 5000 U/min tool turret 12 times C4 Capto Itodpfx Anjynbcho Njk total power requirement 45 kW weight of the machine ca. 11 t dimensions of the machine ca. 7,0 x 5,0 x 3,2 m CNC lathe with SIEMENS SINUMERIK 840D control; Screw conveyor with chip breaker and return pumping station; NC-steady SMW-SLU-1-OLD Ø10-70mm; 12-fold tool turret SAUTER 0.5.460.220; NC tailstock; Artis monitoring; Pickup-loading incl. conveyor. Without coolant system, was connected to central supply. Machine can be inspected under power.

Condition: like new (used), Year of construction: 2022, operating hours: 105 h, functionality: fully functional, Haas ST50 Horizontal Turning Machine Slant Bed Lathe. Isdpexrf Stjfx An Notk Bought new directly from Haas and installed in Early 2023. As a "last of line" model from Haas (which they've yet to make this size since), this machine is fully loaded and as you can see from the build list below it is very well spec'd. It also only has 105 hours use. Viewing advised and welcome at our workshop in Canterbury, Kent. Videos can be sent and or uploaded to Youtube also. This machine and others we are selling are also listed else where. Please get in touch with us at Showan Hydraulics, Barham, Kent if you require any further details. £325,000 + VAT PRODUCT OVERVIEW • Maximum Capacity: 25.5" x 80" (648 x 2032 mm) • Spindle Bore: 8.5" (216 mm) • Swing Over Bed: 34.5" (876 mm) • Main Drive: 55 hp (41 kW) vector drive • Spindle Speed: 1200 rpm, 2-speed gearbox • Spindle Nose: Front and rear A2-15 • Chucks: 25" (635 mm) Manual 3-Jaw and 4-Jaw Chucks • Turret: 12-station bolt-on turret • Tailstock: Programmable servo with MT6 quill • Control System: 15" touchscreen interface with USB port, memory lock keyswitch, and colour remote jog handle • Additional Features: Rigid tapping and variable flow coolant pump _____ STANDARD FEATURES • Bolt-On Toolholder Kit: Comprehensive set of toolholders, sleeves, coolant block, and turning stick clamps for flexible setup. • 1200-RPM Spindle: Powerful 55 hp (41 kW) A2-15 spindle with 2-speed gearbox for optimal torque and speed. • Program Memory: 1 GB onboard memory for program storage and backup. • Coolant System: 95-gallon (360 L) tank with 3/4 hp (0.6 kW) pump del

Condition: good (used), Year of construction: 2010, 400mm max machining diameter, 640mm max cutting length, 685mm swing, 12 Station Turret, Itodjzqr N Aspfx An Nsk Fanuc 32i Control, spindle motor power 25kW, 77mm diameter bar cap, 3 jaw chuck, swarf conveyor, tool presetter, coolant,

Condition: used, Year of construction: 2015, 3 axis cnc lathe DMG MORI CTX BETA 2000 Itsdpfx Anjulw Ige Njk Year of production 2015 Siemens 840D control C axis driven tools Tool head 16 positions Sauter VDI40 Max. workpiece diameter 600mm Max. workpiece length 2,000 mm Spindle clearance: Ø104mm Hydraulic support Measuring probe

Condition: good (used), Year of construction: 2005, machine/vehicle number: SBLG 0005, Proto Trax VL 3 jaw SMW chuck 11KW Spindle motor 104mm spindle bore Spindle speeds 30-1800RPM 350mm swing over cross slide X axis travel 280mm Z axis travel 1650mm Iodpfx Aozb Ipzsn Netk 1750 mm between centres Coolant pump and tank