Used Hermes for sale (382)

Condition: reconditioned (used), Plate size: 1000 x 1500 mm Forming area: 960 x 1460 mm Drawing depth: 600 mm Ncjdpewf D R Refx Ahzsl If you would like further details or a quote, please contact us.

Condition: used, functionality: unexamined, For sale here is an Illig Sb 74 D, which is suitable for skinning, blistering not possible. Njdpfxowpvbpe Ahzjcl Please request technical data.

Condition: reconditioned (used), functionality: fully functional, Plate size: 2000 x 1000 mm Forming area: 1960 x 960 mm Drawing depth: 600 mm Nedpfxjwf Ebwj Ahzocl If you would like further details or a quote, please contact us.

Condition: used, Year of construction: 2007, functionality: fully functional, film width: 1,500 mm, ILLIG Universal Thermoformer UA 250 1G with BE 250 sheet / roll, sheet size max. 2500 x 1500mm, forming area max. 2450 x 1450mm, mold height max. 860mm, material thickness max. 12mm Equipment machine: > automatic loading including roller block and Sheeter for additional roll production > Screen controls > Upper and lower heating can be regulated via 4 zones > Automatic pre-blow and demolding > Vacuum cascade can be set to 5 percentages - table speed, upper punch speed, pre-blowing, demoulding, table vacuum > 8-fold air-blowers D06 > Lot control at the table > Ball table for easier mold changes > pneumatic blow box ventilation > Plate loading with centering table > Various clamping frames / window panels incl. We offer the machine in the following technical state: Ncedpfx Ahjft S Easzel 1. technically tested with dry run acceptance 2. technically overhauled, blending in green, tested with dry run acceptance 3. technically overhauled, completely repainted in white and blue, tested with acceptance in dry running (example image in white / blue)

Condition: used, functionality: fully functional, ILLIG Universal Forming Machine Type UA 155 4g solo Technical Data - Siemens control system - Max. material size: 1500 x 1250 mm - Max. forming area: 1450 x 1200 mm - Max. tool height: 700 mm - Max. material thickness: 12 mm - Heating capacity: 96 kW - Total power: 105 kW - Electrical protection: 160 A - Vacuum pump capacity: 250 m³/h - Compressed air requirement: 6 bar Features - Top heater with 5-zone HTS control (700ºC) - Bottom heater with 5-zone HTS control (500ºC) - Cooling fan D06 - Table cascade Ncsdpfoxlzqfox Ahzsl - Vacuum cascade - Top punch - Includes ILLIG chiller and ILLIG temperature control unit

Condition: used, Year of construction: 1998, ILLIG Universal Forming Machine UA 155 4G + BE 155 P FHZ Technical Specifications: - Maximum material size: 1500 x 1250 mm - Maximum forming area: 1460 x 1210 mm - Maximum tool height: 600 mm - Maximum material thickness: 12 mm Forming Station - Schleicher P03 control system - Automatic tooling infeed and removal function - Top heater with ceramic elements and 5-zone control - Bottom heater with ceramic elements and 3-zone control - Storage of programs and heating settings - Clamping frame with quick-change system - Upper frame parallel, longitudinal crossbars for use with fixed-format frames - Lower clamping frame for frame installation from below, central clamping via electric motor - Bottom table pneumatically operated, rapid/creep speed adjustable by percentage - Upper stamp rapid/creep speed adjustable by percentage - Pre-blow automation adjustable by percentage - Pre-vacuum adjustable by percentage - De-moulding automation adjustable by percentage - Sheet sag control by light barrier with support air - Six-fold cooling fan - Large front opening for tool changes - Vacuum pump Sheet Feeding - Automatic sheet feeding system - Finishing heater in feeding area for pre-heating or final heating of sheets - Motorized sheet lifter Ncedpoxlzrcsfx Ahzel - Motorized adjustable sheet positioning - Motorized transport lifter - Motorized adjustable transport width

Condition: used, functionality: fully functional, Machine DU 1500 x 1000 x 620 T7 No. 98 15254 Plate size: 1000 x 800 mm, Draw depth: 620 mm Year of manufacture: 1998 Rated current: 238 A Total connected load: 164.5 kW Control system: Siemens OP 37 Equipment: • Loading/unloading machine Ncjdpfxjxmgvco Ahzol • 6 cooling fans • Upper punch • Film sag control • Motorized adjustable clamping frame • Flash emitter • Heating pyrometer • Cooling pyrometer

Condition: reconditioned (used), > Upper heating with small individual radiators via toggle switch > Lower heating with large radiators > Upper stamping system Ncedpfx Ajfug Anshzsl > Protective grille > 4 cooling fans D05 > Automatic pre-blowing and demoulding

Condition: reconditioned (used), functionality: fully functional, Max. forming area 960 x 660 mm Min. forming area 269 x 444 mm Max. sheet thickness (manual loading) 12 mm Max. sheet thickness (automatic loading) 10 mm Max. tool height 450 mm Year of manufacture 2000 Technical features of forming station UA 101 L: - Siemens control with swiveling operating panel - Powered movement of upper and lower heaters via rocker arm - Upper heater: 5 temperature control circuits via pilot radiators - Lower heater: 3 temperature control circuits via pilot radiators - Height-adjustable upper heater - Upper plunger system - Parallel clamping frame Nodowf Dtxepfx Ahzocl - Automatic window plate adjustment, lower frame - Automatic window plate adjustment, upper frame - Vacuum for sub-table adjustable via cascade control - Pre-blow/demolding adjustable via cascade control - 4 cooling fans - Front opening with pneumatic interlock for tool change - Film sag control - Film pre-blow control - Vacuum preparation at the upper plunger - Tempering connection - Automatic tool change system, large setup - Vacuum pump Technical features of loader BE 101 L: - Upper and lower preheating - Powered movement of upper and lower heaters via rocker arm - Upper heater: 5 temperature control circuits via pilot radiators - Lower heater: 3 temperature control circuits via pilot radiators - Height-adjustable upper heater - Motorized, parallel lifting film transport - Film transport via pin chain - Film guidance with rollers - Automatic transport width adjustment - Motorized sheet lifter with automatic tool clamping - Mobile sheet loading trolley Options (price on request): - Pyrometer in upper heater for measuring temperature on film - Retrofit for roll material processing

Condition: reconditioned (used), functionality: fully functional, Plate size: 1250 x 1500 mm Ncjdpfx Ahjwf Ea Tozol Forming area: 1200 x 1460 mm Drawing depth: 700 mm If you would like further details or a quote, please contact us.

Condition: reconditioned (used), functionality: fully functional, Technical Specifications: - Maximum material size: 2500 x 1500 mm - Maximum forming area: 2450 x 1450 mm - Maximum tool height: 600 mm - Maximum material thickness: 12 mm Equipment: Forming Station - Schleicher P03 control system - Automatic setup function - Top heater: ceramic emitters (500 W) with 4-zone control - Individual selection of upper heating elements, including lowering - Bottom heater: ceramic emitters (300 W) with 4-zone control - Individual selection of lower heating elements, including lowering - Program and heating settings storage - Clamping frame with quick-change system - Parallel upper frame, longitudinal runners for use of fixed format frames Nedpswf Eb Refx Ahzecl - Lower clamping frame for frame installation from below, central clamping via E-motor - Pneumatic lower table with rapid/creep speed, adjustable in 15 steps via control panel - Upper punch with rapid/creep speed, adjustable in 7 steps - Vacuum pump with cascade control, adjustable in 15 steps via control panel - Pre-blow automation, percentage adjustable - Pre-vacuum adjustment, percentage adjustable - Automatic demolding, percentage adjustable - Plate sag control via light barrier with support air - 8-fold cooling fan with spray nozzle cooling - Large front opening for tool change Loading - Automatic sheet loading system - Centering table for precise positioning of sheets in the feeder - Motorized sheet lifter - Motorized sheet positioning adjustment - Motorized transport lifter - Motorized adjustment of transport width

Condition: reconditioned (used), functionality: fully functional, Plate size: 1000 x 1500 mm Forming area: 960 x 1460 mm Drawing depth: 600 mm Ncodpfx Aswf D S Uohzol If you would like further details or a quote, please contact us.

Condition: good (used), Temperature controller, temperature sensor, temperature converter, temperature monitor, thermostat, flue gas thermostat, trace heating thermostat Ncjdponch H Tsfx Ahzel -Manufacturer: Raychem, thermostat with temperature sensor -Type: TRDR -Temperature range: - 0-15 °C / 0-15 °C -Dimension: 160/105/H55 mm -Weight: 0.6 kg

Condition: good (used), Thermal motor contactor relays, relays, heating current monitoring, preheating for generators, contactors, semiconductor contactors, contactors -60-100 A Class 10 -Weight: 0.8 kg Ncsdpfx Aob A Svyohzsl

Year of construction: 1999, condition: ready for operation (used), A Multivac thermoforming machine is available. Film width: 562mm, max. forming depth: 200mm, overall system dimensions X/Y/Z: approx. 14000mm/1400mm/2000mm, weight: approx. 4500kg. An on-site inspection is possible. Nodpfx Aeyarqmjhzjcl

Condition: used, mileage: 172,695 km, power: 130 kW (176.75 HP), first registration: 02/1965, fuel type: diesel, axle configuration: 6x4, wheelbase: 5,680 mm, fuel: diesel, driver cabin: day cab, gearing type: mechanical, suspension: steel, total length: 7,840 mm, total width: 2,440 mm, Year of construction: 1965, Equipment: trailer coupling, = Additional Options and Accessories = - Leaf suspension - Parabolic suspension - Towing eye = Remarks = Nsdpfexr Nqtox Ahzjcl MACK B53 Thermodyne - 40,798 Stock no.: 40,798 [GENERAL INFO] Brand: MACK Model: B53 Thermodyne Configuration: 6x4 Category: Flatbed Year: 1963 Mileage: 172,695 Chassis number: B53S3717 [ENGINE] Displacement: 11,000 cm³ Number of cylinders: 6 Power: 177 HP [GEARBOX] Brand: Transmission: Manual Number of gears: [OPTIONS] Dutch/NL registration Unique unit [MORE INFORMATION?] = Further Information = Technical Details Number of cylinders: 6 Engine displacement: 11,000 cc Axle Configuration Suspension: Leaf suspension Front axle: Max. axle load: 8,160 kg; Steered Rear axle 1: Max. axle load: 9,050 kg Rear axle 2: Max. axle load: 9,050 kg Weights Curb weight: 8,089 kg Payload: 18,171 kg Gross vehicle weight: 26,260 kg Environment Emission class: Euro 0 Identification License plate: BH-07-75

Condition: used, Industrial washing machine Emsa Rotatherm Mini for cleaning parts and tools from grease, oil, resin, wax, paints, chips and much more. Core diameter: 410 mm Ncedpfsx Sx Ecsx Ahzsl

Condition: excellent (used), Mathis THN 10988 Laboratory Thermosol System Application This padder-dryer combination has proven itself extremely effective in practice. It is used in this form for a wide variety of hot air treatment processes, such as drying, setting, condensing, thermosolizing, etc. This system is used wherever a certain sample size is required, for example, to produce sample collections or similar. THA Dryer If the padder and dryer are to be used separately in addition to continuous operation, the THA dryer should be selected. This unit is equipped with an unwinder at the dryer inlet and an extractor at its outlet. This element determines the fabric speed when operated separately. This offers the advantage of using the padder and dryer independently and simultaneously. The fabric is then transferred to the dryer for drying, setting, condensing, etc. If all of the above-mentioned applications are to be ensured and if the use of pin frames is also desired for stand-alone operation of the dryer, the THN model is preferable. The standard pin frames are suitable for a sample size of max. 50 x 50 cm (larger pin frames available upon request). Lengthwise adjustable frames for woven fabrics or lengthwise and widthwise adjustable material holders for warp-knitted and knitted fabrics, nonwovens, etc., as well as clamp frames for foils and paper, are available. Drying Chamber The drying chamber, including the electrical equipment box and control panel, are mounted on a base frame and bolted together to form a single unit. Good thermal insulation of the dryer is ensured by its double-walled construction with insulation between them. The nozzle array, with a length of 1300 mm, is divided into an upper and lower nozzle compartment. A control flap allows for equal ventilation from top and bottom, or more air from top or bottom. Fan and Heater Intense air circulation is ensured by a powerful fan with a capacity of approximately 900-3500 m³/h, combined with a well-tuned heating output, resulting in optimal evaporation performance. A dual-protection monitoring system reduces maintenance and increases the operational reliability of the dryer. The heating capacity is designed for rapid heating and is automatically reduced once the desired temperature is reached to avoid unnecessary power surges. Nodpfx Aou D Ariohzocl The temperature is controlled by an electronic measuring and control device in the range of 20-250°C. The fresh air is drawn directly into the recirculation fan via a fan. The desired flow rate can be adjusted using a step switch. Technical Specifications Air velocity approx. 4-12 m/sec Air flow approx. 900-3500 m3/h Temperature range up to 250°C Heating output approx. 27 kW Nozzle area 1300 mm Fabric tension continuously adjustable Fresh air supply adjustable to multiple levels Dimensions: LxWxH = 4800 x 1380 x 1750 mm Purchase price: €86,275 Other items in other sizes – new and used – can be found in our shop! International shipping costs upon request!

Condition: excellent (used), Mobile plasticiser for press processing of thermoplastics Manufacturer: KMH Type: 60 S Hydraulics PN: 150 bar Pn: 16,5 kW P heating: 8 kW 400 V Single STW 150/1-3-10-K  Temperature control unit  3.9 kVA Heating capacity 3 kW 380 V Nsdpfxjg H I Nxo Ahzocl Hydraulic pump Complete factory closure, large selection of storage platforms, pallet racks, shelf racks, paternosters. High-quality industrial machines, lathes, grinding machines, hand machines. Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: good (used), approx. 7 pieces Sato printer CG408DT-LAN thermal printer with LAN connection | label printer - used - : Price per piece from location: only €85 (net)! Manufacturer: Toshiba Type: CG408DT-LAN Year of manufacture: unknown Sato printer CG408DT-LAN - label printer with LAN connection Sato printer CG408DT-LAN, a reliable thermal printer for professional labeling in various areas of application such as warehouse, logistics or office. The LAN connection means the printer can be easily integrated into the network, which ensures flexible use. Product details: • Model: Sato CG408DT-LAN • Print technology: Thermal printing (direct thermal printing) Ncsdpfovx E Rajx Ahzol • Print resolution: 203 dpi • Print speed: Up to 152 mm/s • Media width: 25 mm to 112 mm • Connection: LAN connection (network capable) • Areas of application: Label printing for logistics, shipping, warehouse, retail The printer is in perfect condition and offers high print quality with fast turnaround times. Ideal for a variety of label formats. Condition: good Available: immediately Location: Braunschweig

Condition: excellent (used), THERMAL TRANSFER PRINTING SYSTEM WITH PUNCH (printing, laminating, punching) Ncsdpfx Aovf Ig Djhzjl Equipment / Additional information: Car inspection stickers were last produced

Condition: good (used), Code: 0283 Brand: ITALPRESSE Model: 25/13 Fabricated platen for diathermic oil press Technical data: Platen dimensions: mm 2500 x 1300 Max temperature up to 120° Max working pressure: 3/5 kg/cm2 Heating medium pressure 0,5 ate Composition: Aluminium - Flat gauged steel sheet - Coil of piping for fluid circulation - Reinforcement piping - Flat gauged steel sheet - Insulating material Nedpfx Ahsyazdiozscl

Condition: like new (used), Year of construction: 2021, operating hours: 1,000 h, functionality: fully functional, film width: 1,640 mm, pressure: 6 bar, total width: 5,406 mm, total length: 6,840 mm, total height: 3,808 mm, heating capacity: 9 kW (12.24 HP), pump capacity: 60 l/min, - The machine must be dismantled. The conversion costs have already been deducted from the listed price. + 2x auxiliary pressurized water units up to 95°C for table tools; Nedpfjxmwl Iex Ahzscl 60 l/min pump capacity, 6.3 kW cooling capacity, 9 kW heating capacity + Automatic heating control + Fully automatic central lubrication + Feed unit, standard right + Ejector device for molded parts + Fully automatic central lubrication BSM + 2 loading magazines + Cooling with floor-mounted central blower and 6 adjustable air outlets + Hardware interface for external device

Condition: excellent (used), RS Simulators RS Simulators ST2K 320/70D Water-cooled Shock Test System For sale is a high-performance thermal shock test system, model ST2K 320/70D. This unit is ideally suited for standardized thermal shock testing according to DIN EN 60068‑2‑14, including optional humidity testing in the upper test chamber. With its two temperature chambers (–70 °C to +240 °C) and automatic test basket transfer, this system provides the perfect solution for component, material, and reliability testing in industry, research, and quality assurance. Main technical data: Temperature ranges: Upper test chamber: +40 °C to +240 °C Temporal deviation: ±0.8 K (per DIN 50011, empty chamber) Lower test chamber: –70 °C to +240 °C Temporal deviation: ±0.8 K (per DIN 50011, empty chamber) Optional humidity test – Upper test chamber: Temperature: +40 °C to +90 °C Relative humidity: 20% to 98% r.h. (±2–5%) Test basket transfer: Vertical movement, < 10 seconds changeover time Power supply: Total power: 16 kVA Ncjdpfx Aowx Ip Dshzol Current consumption: 32 A Main fuse: 3 × 35 A slow-blow Mains connection: 3 × 400 V / N / PE / 50 Hz Main cable: 5 × 16 mm² Water & compressed air connections: Cooling water inlet: G ¾", approx. 3 bar, max. 10 bar / max. 15 °C Cooling water requirement: max. 1.4 m³/h Cooling water return: G ¾", max. 25.2 °C Condensate drains: 2 × G ½", 1 × G ¼", unpressurized Deionized water inlet: G ⅜", approx. 3 bar, max. 6 bar Compressed air connection: Quick coupling NW 7.2 (G ¼"), min. 4 bar, max. 10 bar Dimensions & weight: Test basket internal dimensions (Type ST2K 320): Internal dimensions: Width approx. 430 mm, Height approx. 470 mm, Depth approx. 700 mm External dimensions: Width: approx. 1100 mm, Height: approx. 2300 mm, Depth: approx. 2300 mm Weight: approx. 1150 kg Other technical data: Sound level: approx. 60 dB(A) at 1 m distance (free field) Refrigerants: R-404A: approx. 2.5 kg (GWP 3800, limit value 0.48 kg/m³) R-23: approx. 0.8 kg (GWP 12100, limit value 0.68 kg/m³) Permissible operating environment: Temperature: +12 °C to +30 °C Humidity: 25%–75% r.h. For your safety as the buyer, please note the following information! The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant, if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Specifications and details subject to change and errors reserved!) We are happy to answer further questions by phone.

Condition: excellent (used), Bystronic Type: ERMM180 Thermoplastic applicator Field of application The thermoplastic applicator applies a thermoplastic material to rectangular glass panes rectangular glass panes as part of a production line for solar modules. The plastic forms a seal to a second pane of glass, which is applied in a later step. applied in a later work step. Ncjdpfx Aed N Erpshzsl The panes are fed, applied and removed on horizontally running belts/belt conveyors. belts/conveyors. The thermoplastic applicator is a highly technical machine that has to fulfill many requirements with great precision. For this reason, you should only use products (glass, sealant) that meet the specifications on the following pages. the following pages. This helps to achieve high-quality and safe production. production. Performance and connected loads Maximum transport speed: 18 m/min Height of the glass running surface: 1100 mm Height of the applied sealant line: 0.5 to 1.2 mm Maximum width of the applied sealant line: 12.0 mm Required constant pneumatic inlet pressure: 6.5 to 8.0 bar Pneumatic operating pressure: 6.0 bar Compressed air consumption in normal operation: 10 standard liters/min Compressed air consumption when changing barrels: 500 standard liters/min Average energy consumption per hour: 10 kWh Working temperature of the sealant: 110°C to 130°C Ambient conditions and emissions Minimum ambient temperature: +15°C Maximum ambient temperature: +35°C Maximum relative humidity:: 75% Noise level: less than 70 dB (A) Requirements for the drums for the sealant Design: Material lidded container D18 according to DIN 6644 - with base (F1) and smooth outer surface (jacket design, smooth). Capacity: 216 liters Inner diameter: 571.5 mm Height: 874 mm Minimum wall thickness: 1.25 mm Machinable glass panes Types of glass Glass panes with a smooth surface can be processed (float glass). Dimensions and weights Smallest dimensions Largest dimensions Geometry 1198 mm 1200 mm Length LS 498 mm 600 mm Width BS 1.8* mm 5.0* mm Thickness DS Thermoplastics based on poly-iso-butylene (butyl) can be processed. The plastic must be flowable in the range of approx. 110°C to 130°C and have a defined viscosity curve. viscosity curve. Only use materials that have proven themselves in practice and that have been approved by the manufacturers of these materials and by Bystronic. by the manufacturers of these materials and by Bystronic for your intended use. intended use. For detailed product descriptions and information on handling, storage and disposal of the plastic disposal of the plastic used can be found in the information sheets and safety data sheets provided by the manufacturers of the plastics. Dimensions of gantry robot with glass conveyor Height x width x depth: 2800 x 1890 x 2735 mm Weight of the gantry robot: 850 kg Weight of the glass conveyor: 1400 kg Drum pump dimensions Height x width x depth: 3320 x 1060 x 1200 mm Weight (without drum): 850 kg Weight (with drum): 1100 kg Height H for drum pump FP1: 4400 mm Height H for drum pump FP2: 4000 mm Control cabinet dimensions Height x width x depth: 2200 x 1800 x 600 mm Weight: 450 kg The applicator was used with the material butyl. Condition: second-hand / used From test laboratory, as good as new condition, only a few operating hours for testing! Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.