Used Hinge Drill for sale (5,919)

Condition: good (used), End mill, shank mill, milling cutter -Four-cutter -Roughing end mill -Diameter: 16 mm -Usable length: 20 mm -Type: HSSE -Quantity: 17 pieces -Sale: only complete set Isdjb A Sruspfx Addoht -Weight: 4 kg

Condition: used, Year of construction: 1979, Technical details: grinding diameter min/max: Aufnahme: Ø 200 x 32 mm number of spindle speeds: 3000 U/min total power requirement: ca. 1,2 kW weight of the machine ca.: 0,24 t dimension machine xH: 0,7 x 0,9 x 1,6 m The grinding spindle is equipped with two hand levers: Working range left = hand grinding device for small shank drills, grinding wheel currently Ø 120 x 30mm; admission=Ø 32mm; speed 3000 rpm.; with grinding support Working range right = swiveling device for conical shank drill; cup grinding wheel currently Ø 160 x 30mm; admission=Ø 32mm; speed 3000 rpm. Cutting angle max 180° for double-edged and 120° for triple-edged Ihedpou Ng Ncsfx Addot Clearance angle 5° - 9°; drill-Ø 8 - 40mm, possible grinding modes e.g.: normal grinding, DK-grinding, center grinding, spiral grinding, step drill grinding Machine illumination available *

Condition: excellent (used), Year of construction: 1993, Catalogue number 7718 TECHNICAL DATA - Number of spindles: 23 pcs - Head prepared for screw-in drills - Distance between outermost spindles: 704 mm - Distance between spindles: 32 mm - Pneumatic clamps: 2 pcs - Table surface dimensions: 1200x850 mm - Height to table surface: 930 mm - Feed cylinder stroke: 70 mm - Max drilling diameter: 12 mm - Drilling adjustment vertical/horizontal and at an angle - Drilling unit adjustment pneumatic - Main motor: 2×0.75 kW - Dimensions L/W/H: 1270x1330x1350 mm - Weight: approx. 700 kg ADVANTAGES – Made in Poland – 23 spindles – Head prepared for screw-in drills – Not repainted – DTR technical documentation – Used drilling machine, very good condition Ihjdew I R Tiepfx Addjt Net price: 8900 PLN Net price: 2120 EUR based on exchange rate of 4.2 EUR (Prices may change depending on currency fluctuations)

Condition: new, Special offer price incl. shipping within DE (without islands) While stocks last Technical data: Iedsd R A Dcspfx Addsht Drill diameter: 3 - 13 mm point angle: 90° - 140 Speed: 4800 1/min Connection: 230 V Motor power: 0,18 kW weight, approx.: 8,1 kg Dimensions, approx.: 320 x 180 x 190 cm Features: - Ideal for grinding HSS/hard metal twist drills. - Safe operation due to force-guided grinding process - Point angle adjustable from 90° - 140 - Compact design, with collet storage in the machine and handle for quick stowage - Including pointing device to reduce the feed force - Device for relief grinding of drill cutting edges to reduce friction between drill and workpiece - Rotor with precision ball bearing Scope of delivery: - Grinding wheel CBN - 11 collets ER 20, 3 - 13 mm - Collet holder ER 20

Year of construction: 1980, condition: used, Drill bit sharpening machine Ihjdpfx Adox Tvg Tjdjt

Condition: new, Bench drill OPTIMUM D 23 Pro-Set OPTIdrill - Exhibition machine - ----- Technical data ----- Number of speeds: 12 steps, Speed range: 200 - 2,440 rpm, Spindle stroke: 80 mm, throat depth: 180 mm, Table size: 280 x 245 mm, max. drilling capacity in steel: 25 mm, Motor: 750 watts, Columns Ø: 73 mm, Dimensions (LxWxH): 615 x 330 x 1,015 mm, Weight: 63.5 kg, Spindle holder: MK 2 Bench drill with V-belt drive - Industrial motor - User-friendly safety switch in accordance with IP 54 - Digital drilling depth and speed display integrated in the housing - Separate emergency stop switch - Precision spindle bore - Safety electrics with 24 V DC voltage - Guaranteed concentricity of less than 0.02 mm measured in the drill sleeve - Drill spindle with precision ball bearings - High-quality quick-action drill chuck - Drilling depth stop - Precisely machined, stable drill table with diagonal Ihsdpfsu R S Exex Addet T-slots running diagonally and circumferential cooling water channel - V-belt cover with safety switch - One-piece cast aluminum Die-cast quill lever with soft-grip handles - Largely dimensioned, height-adjustable safety screen with safety switch - Heavy-duty design of the entire machine - GATES quality belt - Right/left rotation -- Scope of delivery Quick-action drill chuck 1 - 16 mm Morse taper MK 2 / B16, T-nuts Special offer set including machine vice BMS 100 - new exhibition machine -

Condition: good (used), End mill, shank mill, milling cutter -Four-cutter -Roughing end mill -Diameter: 25 mm -Usable length: 55 mm -Corner radius: 4 mm -Type: STG-160 Quantity: 16 pieces Ihedpob A Srlsfx Addet -Sale: only complete set -Weight: 6.5 kg

Condition: used, Year of construction: 1984, Technical details: grinding diameter min/max: 8 / 40 mm number of spindle speeds: 3000 U/min total power requirement: ca. 1,2 kW weight of the machine ca.: 0,24 t dimension machine xH: 0,7 x 0,9 x 1,3 m The grinding spindle is equipped with two hand levers: Working range left = manual grinding device for small shank drills. working range right = swiveling device of conical shank drills cutting angle max 180 Drill swivel arm small: clearance angle 5° - 9°; drill Ø 8 - 15mm manually adjustable; grinding wheel cup wheel Ø 200 x 40mm with holder Ø 32mm Drill swivel arm large: clearance angle 5° - 9°; drill Ø max 400mm; pitch 6x with index grid manual; grinding wheel currently clamped Ø 180 x 31mm with receptacle Ø 32mm Grinding modes: Normal grinding, DK grinding, center grinding, spiral countersink, multiple step drill. * Ihjdpsu Ng Irofx Addot

Condition: used, Year of construction: 2003, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, FANUC ROBODRILL T21i DL CNC DRILL-TAP MACHINE MAKE FANUC, MADE IN JAPAN MODEL ROBODRILL T21i DL CONTROL FANUC 16I-MB YEAR 2003 TABLE SIZE 850.0 x 410.0 mm Ijdpfx Ajtnh Aljddsht TRAVERSES X Y Z 700.0 x 400.0 x 330.0 mm SPINDLE SPEED 10 – 20,000 RPM ATC 21 STATIONS SPINDLE TRAPER ISO 30 RAPID TRAVERSE 54m/min DISTANCE BETWEEN SPINDLE NOSE TO TABLE 150.0 mm – 480.0 mm CUTTING FEEDRATE 1 – 30,000mm/min TOOL CHANGE TIME 1.6 sec MAX TOOL DIA 80.0 mm MAX TOOL LENGTH 200.0 mm MAX TOLL WEIGHT 2 kgs POWER RATING 5.5 Kw PLUS SWARF TRAY COOLANT SYSTEM SET OF TOOLING SET OF MANUALS

Condition: ready for operation (used), Beautiful Alzmetall industrial column drilling machine, ready for use and immediately available. Column drilling machine manufacturer: Alzmetall, model AB3 / ESV. The machine runs smoothly and drills precisely, just like on the first day. It is equipped with a retrofitted emergency stop switch and thus complies with DGUV Regulation 3, which was valid until 10/25 and can be renewed upon request. Technical data: - Drilling capacity in steel: 32 mm Ijdpfx Aox Tfkzsddsht - Spindle mount: MK3 - Throat depth: 290 mm - Quill stroke: 160 mm - Speed range: 30 - 1600 RPM - Motor power: 380V, 4.4 A = 2.3 HP according to nameplate - Machine weight: approx. 500 kg Used machine, fully operational, in well-maintained condition. Additional accessories available. Details, video, or test run upon request. Inspection by appointment possible. Delivery no problem.

Condition: excellent (used), Year of construction: 1989, Alzmetall AB 40 SV MK 4 in original condition Infinitely variable speed 60 - 1530 rpm 4-step feed Table 720 x 560 mm Throat 345 mm Spindle stroke 180 mm Dimensions: H 1.98 m, W 0.72 m, D 1.2 m Weight approx. 650 kg Condition: very good, runs smoothly and quietly, all functions operational. Iedoyagxropfx Addjht Of course, inspection under power is possible Free loading from D - 88433 Schemmerhofen

Condition: used, functionality: fully functional, machine/vehicle number: 19111064, Good day, We hereby offer you, without obligation, a used bench drill type TB 10 from the manufacturer Flott. Manufacturer: FLOTT Type: TB 10 Machine No.: 19111064 Drilling capacity in steel, approx. Ø 10 mm Drilling capacity in aluminium, approx. Ø 12 mm Speed range (rpm): 400 – 4800 rpm Note: The above-mentioned technical data have been taken from the operating manual, manufacturer’s brochures, or other sources, for which we cannot guarantee the accuracy or completeness. Scope of delivery: - 1 used Flott TB 10 bench drill, without vice - 1 steel pedestal base Application area and condition: The machine was sporadically used in a factory locksmith’s workshop for repair work and reproduction of spare parts for our own machinery. The machine is fully functional and can be inspected under power in our workshop. We would be pleased if this machine is of interest to you. Ijdox Rcrdspfx Addjht Your Service Team at Mertens & Frowein GmbH

Condition: good (used), End mill, shank mill, milling cutter -Two-knife -Finish cutter -Diameter: 14 mm -Usable length: 30 mm -Corner radius: 0.7 mm Iodpob A I Rbsfx Addjht -Carbide: equipped -Quantity: 88 pieces Price: per piece -Weight: 8 kg

Condition: used, Year of construction: 1982, Technical details: Iodpfx Adeu Ngxdodeht dimensions of grinding wheel: Ø 150 x 20 mm grinding spindle speed: 3600 U/min height over floor: 900 mm current type: 220 V machine weight approx.: 27 kg dimensions L x W x H: 0,37 x 0,35 x 1,4 m Double sanding bench sitting on foot stand (foot Ø 353mm) Left side with drill grinding device (angle 90° - 180°), longitudinal adjustment 25mm incl. accessories *

Condition: used, diameter 5-20 mm length 10-200 mm tool adaptor MK different drilling, milling and turning tools and other accessories. Drills, tapper and mills 30 Euro/kg Ihsdpfsi Eg Rtjx Addet other accessories: 10 Euro/kg

Condition: new, Gear driven column drill 400V-3Phase Max. drilling capacity Cast iron / Steel --- 40 / 35 mm Max. tapping capacity Cast iron / Steel --- 24 / 22 mm Spindle adaptor --- MK4 Spindle stroke --- 120 mm Ijdpfxjk H Ig Re Addsht Spindle speed --- (12) 75~3200 rpm Automatic spindle feed --- 0.10/0.18/0.26 mm/omw Column diameter --- 125 mm Unloading --- 320 mm Distance from spindle nose to table --- 85~665 mm Distance from spindle nose to base --- 1140 mm Drilling table --- 500 x 380 mm T-slot --- 14 mm Foot --- 470 x 670 mm Motor --- 1.5 kW Machine dimension --- 470 x 710 x 2000 mm Weight --- 470 kg

Condition: good (used), Description: Robust industrial pillar drill manufactured in the Soviet Union. The STANKO 2H118-1 is designed for workshop use and is suitable for drilling, boring, countersinking, as well as basic thread cutting operations. Exceptionally heavy-duty construction, mechanical gearbox, and long-lasting design. Technical Data (typical version) - Drilling capacity in steel: approx. 23 mm - Spindle taper: Morse taper MT2 - Spindle speeds: 9 steps - Speed range: approx. 90 – 1,400 rpm - Feed: manual - Feed stages: mechanical selection - Motor power: approx. 1.5 – 2.2 kW - Connection: 380–400 V / 50 Hz - Clockwise/Counterclockwise rotation: yes - Spindle brake: mechanical - Depth stop: available - Machine weight: approx. 400 – 500 kg (estimated) - Space requirement: approx. 700 × 800 × 2,100 mm Equipment: - Mechanical gearbox - Solid machine table - Depth stop with scale - Tool ejector - Main switch Iedpfx Asx U Agcoddeht Condition: The machine is used and shows age-appropriate signs of use. Functionality checked. Visual signs of wear are present, technically solid.

Condition: excellent (used), TOS WHN 13 - 5-axis bench-type boring machine Year of manufacture: 1991 spindle diameter 130 mm Table size 2000 x 1600 mm Ihodpfouy Tb Hjx Addot X: 3,500 mm y: 2000 mm Z: 1250 mm W: 800 mm B: 360.000/°1 Spindle speeds 1300 rpm (37kW) SK 50 Heidenhain TNC 355

Condition: good (used), Drill bushings -10x Type: Z10W/36/15 -10x Type: Z10W/36/30 -9x Type: Z10W/36/10 Isdpjb A R Naofx Addeht -9x Type: Z10W/36/9 -10x Type: Z10W/36/14 Price: complete -Weight: 4 kg

Condition: excellent (used), CATALOG NUMBER 6608 TECHNICAL DATA - Number of spindles: 21 pcs - Distance between outermost spindles: 640 mm - Spindle pitch: 32 mm - Max drilling depth: 60 mm - Vertical drilling width: 60 mm - Adjustable drilling (up/down and at an angle) - Right/left drill bits, mounted with hex screws - Pneumatic clamps: 2 pcs - Table surface dimensions: 490x1040 mm - Height to table surface: 920 mm - Main motor: 2.2 kW - Operating pressure: 6-8 bar - Dimensions (L/W/H): 2830/1150/1320 mm - Weight: 442 kg Isdpfjx Sq Amsx Addsht - German manufacture - Original DTR documentation - Unpainted - Mobile Net price: 7,900 PLN Net price: 1,880 EUR (based on a rate of 4.2 EUR) (Prices may vary in case of significant fluctuations)

Condition: excellent (used), BM5139 High Qaulity paper drilling machine. Professional production equipment standing model electric operated - foot pedal triggered Ihjdpev Idfnsfx Addjt heavy duty construction For paper, plastic, textiles, leather - two speed drilling. With automatic lift - two button or foot pedal operated. You are welcome to test this machine with us. We can arrange transport/packaging and loading onto truck or in container. Ask for our price - but your offers are also welcomed.

Condition: excellent (used), Professional drill chuck with SK40 / ISO40 taper, compliant with DIN 69871 A standard. Manufacturer: EROGLU Präzisionswerkzeuge (Germany) – high-precision manufacturing. Model: 03180PB05553 (3/16-IK). Maximum tightening torque: 20 Nm – ideal for drilling and tapping with controlled force. Version with internal cooling (IK – Innenkühlung). Chuck with torque adjustment + / –, allowing protection of tools and workpieces. Solid and durable industrial design – suitable for use in CNC machining centers and conventional machines. Condition: used, in very good technical condition – ready for immediate use. ✅ German quality – precision industrial-grade drill chuck ✅ Ideal for production and workshop applications. Ihedpfx Aexlcz Seddot

Condition: good (used), Year of construction: 2003, Bench drill, stand drill, pillar drill, pillar drill -Manufacturer: Ixion, bench drill type BT13ST -Clamping table: 170 x 170 mm Iedpfxok Tuwve Addsht -Travel: 210 mm -Spindle holder: drill chuck B16 -Projection: 180 mm -Speeds: 420 - 2100 rpm stepless -Pillar: diameter 65 mm -Spindle stroke: 70 mm, with fine stop -Motor: AEG 0.7/1.0 kW -Voltage: 380V -Dimensions: 620/235/H800 mm -Weight: 70kg

Condition: excellent (used), Professional drill chuck from the renowned brand GEWEFA, made in Germany. Designed for clamping drills with a diameter from Ø2.5 to 16 mm in CNC machines, machining centers, and conventional milling machines. The high-quality construction ensures excellent concentricity, secure tool holding, and long service life even under intensive production work. Type: SK40 × Ø2.5–16. Catalogue number: 28.05.046.002. Taper: SK40 DIN 69871. Manufacturer: GEWEFA – Made in Germany. Year of manufacture: 2007. Condition: very good, used. An ideal choice for professional industrial applications and metalworking workshops specializing in precision machining. Price is per unit. Ihedpfx Adoxizauodst

Condition: excellent (used), For sale: professional cutter and drill bit sharpener, model PP U3. Condition: very good, complete unit ready for operation. Included in the set: • Set of grinding wheels • Adjustable angular tool holder • Workshop lamp with flexible arm • Keys and clamping elements Specifications: • For sharpening cylindrical and spiral end mills • For sharpening step and cylindrical drills • Wheel linear speed up to 35 meters per second • Maximum noise level: 66 dB Ijdpsxdh Hqefx Addeht • Machine weight: 41 kg Solid, stable construction—ideal for precise tool machining. A reliable solution for tool rooms, CNC workshops, and machine shops.