Used Homag Bof 211 for sale (490)

Condition: excellent (used), Numerical Control Type Power Control PC85T Software WoodWOP + TOPDRILL No. 2 Through-feed motorized conveyoring belts Ksdjyv Ev Aopfx Abvjdi No. 2 Horizontal units/supports (with Digital quota/axes display) No. 1 Drilling head for each horizontal unit (1 x Kw 1,5) No. 21 Splindles for each horizontal drilling head Max. working width (mm) 2500 Min. working width (mm) 250 No. 4 Bottom vertical units/supports (with Digital quota/axes display) No. 2 Drilling heads/blocks for each bottom vertical unit (2 x Kw 1,5) No. 4 Vertical top pressure clamps Motorized carpet to evacuate chips and wastes Total installed power (Kw) 35

Condition: excellent (used), Year of construction: 2001, machine/vehicle number: 0-200-24-6287, functionality: fully functional, input voltage: 400 V, input current: 56 A, edge thickness (max.): 20 mm, Equipment: CE marking, Used single-sided HOMAG edge-banding machine for straight edges – KL 78/A20/S2 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2001 SPEZIFICATION & EQUIPMENT: Basic machine with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness max. 60 mm - top pressure with compound V-belt, motorized height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - clamping of glue application unit before rear end of workpiece, for even glue application - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors (clock-wise, counter clock-wise), 2x4kW, jumping function GLUING SECTION A20, consisting of: - QA34 glue application unit, on request with PTFE-coating (Teflon) - Pre-melter for EVA glues - Edge magazine, edge thickness min. 0,4 mm to max. 20 mm Edge width (height) max 65 mm - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 6 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit HL81, 2 motors, with straight/chamfer cutting function motorised fine-positioning of snipping stop - Pre-milling (rough trimming) 1,5 kW, top/bottom - Corner rounding FK13, 2 motors (top/bottom) with automatic 8-fold tool changer and several exchangeable trimming heads - Profile (radius-) scraping MN21, with NC-axis positioning - Flat scraping (glue joint) FA10, top/bottom, (version with 3 tracer rollers) - Straight belt sanding unit KS10 - Buffing unit top/bottom Kedjyv Da Hspfx Abvjdi ELECTRONIC CONTROL: - HOMATIC NC21 OPERATING SYSTEM

Condition: excellent (used), FLEXIBLE C.N.C. WORKING CENTER 3 axes (X-Y-Z) Movable panel (workpiece), static working head - Horizontal position of the panel (workpiece) Safety cabin (enclosure) of the working head Numerical Control PowerControl PC86 power Touch (Software woodWOP) Separate electric and command cabinet No. 2 Workpieces fixing clamps (for the panels introduction in the working area) WEEKE Prepositioning Unit - to position workpieces in machine with clamp grippers faster. In-feeding working table (panel support) and Out-feeding table (with motorized belts) Minimum workpieces dimensions (X - Y - Z) mm 200 x 70 x 8 (2 x 4 mm) Maximum workpiece dimensions (X -Y- Z) mm 3000 x 1000 (option mm 1300) x 80 (2 x 40 mm) Two panels simultaneously processables (in Z axe) Separate electric and command cabinet WORKING GROUPS (TOP): 2V42, 2H8X/2Y, N2 X-Y90,F2-ETP-6 KW No. 1 Vertical electro-spindle ETP-6 (power Kw 6) No. 1 Circular Grooving Saw (90° on X-Y axe) dia. mm 125 No. 42 Vertical drilling spindles (power Kw 2.3) Kdedpfxeyu S I Is Abvsi No. 10 Horizontal drilling spindles (8 in X + 2 in Y) WORKING GROUPS (BOTTOM) 2V42, 2H8X/2Y, N2 X-Y90,F2-ETP-6 KW No. 1 Vertical electro-spindle ETP-6 (power Kw 6) No. 1 Circular Grooving Saw (90° on X-Y axe) dia. mm 125 No. 42 Vertical drilling spindles (power Kw 2.3) No. 10 Horizontal drilling spindles (8 in X + 2 in Y)

Condition: good (used), Power supply, control board, input board, control unit, edgebander, edgebander Manufacturer: Homag Homematic -Type: 2Type: 2083027006 -Number: 5 tax cards available -Price: per piece -Dimensions: 20/195/H265 mm -Weight: 0.34 kg Kdedocczk Nopfx Abvei

Condition: ready for operation (used), Year of construction: 2014, A CNC dual spindle woodworking machining system Homag is available. Travel speed: 35m/80m/25m/min, C-axis: 360°, A-axis: +/-100°, Z stroke: 600mm. Workpiece length range: 2450mm/17400mm, max. workpiece width: 1900mm, max. workpiece thickness (incl. clamping devices): 300mm. Main spindle power: 15kW, speed: 24000rpm, tool holder: HSK-F63, saw blade diameter: 350mm. Second spindle power: 18.5kW, speed: 24000rpm, tool holder: HSK-F63. Tool positions: 18/2x10. Total system dimensions X/Y: approx. 19000mm/6300mm, control: Homag. Including underfloor milling unit Homag, 3xtool changers, pickup position, clamping platforms, vacuum clamps, workpiece lifter, laser and additional units. Documentation available. An on site inspection is possible. Ksdpfx Asytgn Tebvodi

Condition: used, Number of machnines 9 Stk. Wooden window production line for sale on behalf of a customer. Machines still in operation can be viewed. Sale includes machines, tools, and programming of the systems produced. Includes angled window and arched window production. Item 1: Weinig Powermat 500, year of manufacture 2010, window version ----- - 6 spindles, 5 of which are PowerLock - 8,000 rpm - Large PowerCom control system - Spindles 2, 3, and 4 axially CNC-controlled - Spindles 2, 3, 4, and 5 radially CNC-controlled - Window package for glazing bead removal: Pneumatic indexing of right and top spindles for bead removal - Includes existing Leitz planing and beading tools - Linked to a Maweg Saturn Duo single-slice wood sander, year of manufacture 1985 and a workpiece return conveyor Item 2: SCM Windor 40 R window system, year of manufacture 2006 ----- - 2 long CNC-controlled slotting spindles - Optima 16: Drilling units for face and longitudinal drilling - ROTATEN: Angled window attachment - 3 long CNC-controlled profile spindles + top and bottom drilling units - Rebating carriage for small sashes - Workpiece return - Includes Leitz window and door tools - Includes separate OKOMA UF 3 rebating machine with tools Item 3: HOMAG CNC machining center BMG310/42/F/K, year of manufacture 2018 ----- - Gantry machine, 5-axis Drive 5C+ with 15 kW - Ceiling laser - Working dimensions 4200 mm length, 1350 mm depth - 32-position disc changer - 8-position linear changer - Fixed drilling head with 18 spindles V12/H6/S0/90 degrees - 8 consoles - 6 lifting rails - Connection for 8 PowerClamp clamps - Approx. 30 vacuum clamps - 4 x PowerClamp clamps - WoodWop - Chip conveyor belt - Various small solid wood clamps, used for casement windows - Including Leitz tools for Homag with arched window production - Including Barbaric vacuum lifter, year of manufacture 2015 Item 4: Löwer MZP 1 mini dovetail press ----- - ??For arched window production Item 5: S+S frame press type Bavaria 200 L, year of manufacture 2014 ----- - Working dimensions 4000 x 2600 mm - With center pressure beam and cross pressure device - Motorized width adjustment - Basic equipment counter profiles - Slanted window control - Pendulum pressure plates + extension for pointed windows - Intermediate insert for small-scale crimping - Various carrier plates for counter profiles and counter profiles Item 6: Striffler sash fitting table ----- - With automatic screwdriver and screw feeder - Fitting rack - Punch for Roto fitting Item 7: Tools ----- All tools belonging to the machines for the wood+wood-aluminum systems IV 72 + 92 mm shown in the PDF - Windows - Lift-and-slide doors - Round and angled windows - Box windows - Entrance doors in many variations - Putty rebate variations - ... Ksdpfxoyclwxo Abvedi Sale of the tools in their current condition, scope, and with accessories as they are currently available. Note regarding window cuts, tool drawings, and tool system listings: Engelfried GmbH does not guarantee that the tools actually present correspond t...

Condition: good (used), Year of construction: 2005, Gluing unit Motorized height adjustment Homatic NC 21 control unit Frequency converter A20 hot melt adhesive unit for roll material up to 3 mm and strip material up to 20 mm edge thickness End trimming unit (two motors) Feed control LCD flat panel display Kdjdpfx Abeyvy D Ievoi Feed rate 18.5 m / min ? Feed rate steplessly adjustable 8–24 m/min or 12–24 m/min Minimum working width 55 mm at workpiece thickness 22 mm / 100 mm at workpiece thickness 60 mm depending on workpiece length Workpiece projection 30 mm Workpiece thickness 12–60 mm Workpiece thickness without contour milling and finishing unit min. 8 mm Jointing/milling unit Workpiece preheating A 20 gluing unit / A 34 hot melt adhesive unit Magazine for solid wood edging, strip material, and roll material Roll cutting device Pressure zone KL end trimming unit Release agent spraying device top/bottom Melting unit with granulate hopper instead of glue pot QA glue pot front section, quick-change (for color changes) Pre-milling unit Contour milling unit with interchangeable heads Universal milling unit Automatic multi-trimming unit, complete Finishing unit The illustrated return unit is not included in the scope of delivery. The data were taken from a data sheet and are therefore supplied without guarantee. Exact configuration on request.

Condition: excellent (used), SINGLE SIDE EDGE BANDER (Left) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Edges thickness in strips / lippings (min/max) mm 0,4 / 20 Panels thickness (min/max) mm 8 / 60 NEW (in 2024) Numerical Control EDGETEQ MOD - Power Touch (WoodCommander) Adjustable Feeding speed up to 25 m/min In-feeding system EZ 14 Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) 2 x Kw 3 Glueing Unit (P.U.R. Glue + Quick Melt system) Band Pressure zone, adjustable by N.C. Edge coils supporting unit (with No. 2 reels) Snipping (end-cutting) unit HL 84 (2 x Kw 0,5 ca.) Pneumatic swivelling and adjustment Rough Trimming unit BF 20 (2 x Kw 1,5 ca.) Multi Function Unit (Profile contour Trimming) FK 11 (2 x Kw 0,4 ca.) Profile edge scraping unit Finish processing unit (Glue scraper + Buffing unit) FA 11 Kdjdpfx Asyt Izbjbvji Panels Return System "LIGMATECH" Mod. ZHR 541/L/095 (with Portal bridge and 360° rotating vacuum head)

Condition: used, Year of construction: 2021, functionality: fully functional, 1. unit steelroller Ø140 mm 2. combi unit - rubberroller and electronic segmented pad, eps system working widt 1100 mm_ working height 3-160 mm - belt size 1900 X 1120 MM Kjdpjym Rl Nsfx Abvedi total 30 kw - total kg ca. 1900

Condition: used, machine/vehicle number: 008395, X axis working area: 3050 mm Y axis working area: 1250 mm Main Electrospindle power: 10 KW Kodpfxjygtcqj Abvedi Number of controlled axes: 3 axes Total number of drilling spindles: 27 Total number of tool changer positions: 8

Condition: used, Year of construction: 2014, CNC-controlled 5-axis machining center in gantry design for milling and drilling workpieces made of wood or wood-based materials. Console table with 8 consoles Vacuum system WoodWop package for AV-PC LED position display system for manual positioning of vacuum clamps and consoles. Positioning accuracy +/- 2.5 mm 5-axis main spindle 10 kW Drive5C. Cardanic 5-axis head for milling, drilling, and sawing at any angle. - Interface for HSK F 63 - Z-axis travel 450 mm - Liquid cooling with temperature monitoring - Spindle with hybrid bearings for maximum precision and long service life - Frequency inverter for electronic speed control 0–24,000 rpm - Maximum tool weight 6 kg incl. holder - Maximum tool length 230 mm from bottom edge of motor spindle - 18-position disc tool changer below Drilling head with 21 spindles, 2.2 kW Vertical spindles: 17 Max. drill diameter: 35 mm Total drill length: 70 mm Shank diameter: 10 mm Kodpsxvaymefx Abvsdi Horizontal spindles: 4 One reinforced boring spindle with mount for grooving saw Max. drill diameter: 10 mm Total drill length: 70 mm Drill holder: 10 mm

Condition: used, Year of construction: 2010, machine/vehicle number: 0-200-95-8810, functionality: fully functional, operating hours: 24,804 h, We have a fully operational Single side edge bander with return conveyor very high spec machine .The machine is currently being used so more than welcome to see it run. Kdsdpfxex Upuaj Abvsi

Condition: like new (used), Year of construction: 2021, Used CNC machining center Manufacturer: Homag Model: Drillteq V-200 (Optimat BHX 055) Year of manufacture: 2021 X-axis working range: 200 – 3050 mm Kodpfx Asymzkvsbvsdi Y-axis working range: 70 – 850 mm Z-axis working range: 12 – 60 mm, special workpiece thickness: 8 mm Vertical drilling spindles: 13 pcs. Horizontal drilling spindles in X: 4 pcs. Horizontal drilling spindles in Y: 2 pcs. Grooving saw in X direction Milling spindle: 10 kW; 1,250 – 24,000 rpm 4-position tool changer (ATC) Workpiece clamping system with collet Max. workpiece length: 3050 mm Workpiece width: 70 – 850 mm Workpiece thickness: 8 – 56 mm; max. weight: 35 kg POWERCONTROL PC86 power touch control unit with Full HD multi-touch 24″ display, operating system Windows 10 Network connection, Tapio-ready prepared WoodWop 7.0 including MDE and production list software BASIC barcode reading system Delivery exclusively includes all tools and HSK holders shown!

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, For right-sided edgebander To suit machine length 6m-7m Ideal for Homag Edgeteq S-300 (KDF1440/1450) or Homag Edgeteq S-380 (KDF1650) Workpiece length: 300 - 2,500 mm Workpiece width: 50 - 1,450 mm 4-sided processing* min. workpiece length: 300 x 300 mm Kdodpfxox Igbdo Abvoi 4-sided processing* max. workpiece length: 1,450 x 1,450 mm Workpiece thickness: 8 - 60 mm Workpiece weight max.: 50 kg Mass per unit area: 25 kg/m² Working height: 835 - 950 mm Feed speed: 8 - 25 m/min

Condition: excellent (used), Year of construction: 2013, Used 5-axis CNC machining center Manufacturer: Homag Model: PROFI BMG 511/40/15/F/K Year of manufacture: 2013 5-axis spindle 15 kW, Drive5C+ MPU drilling head with 30 spindles, 360° Vertical drilling spindles: 20 Horizontal drilling spindles: 10 Additional routing spindle: 6 kW Speed Pack 18-position disc tool changer D=130 below PickUP station for saw blade 350 mm Tool transfer station Workpiece length: All units: Single 4,000 mm, pendulum 2,250 mm, min. 500 mm Tool diameter 25 mm: Single 4,175 mm, pendulum 2,250 mm, min. 500 mm Workpiece width: Rear stop: 1,900 mm Front stop, all units: 1,450 mm; with tool diameter 25 mm: 1,675 mm – Workpiece thickness: – Max. 300 mm including clamping devices – Up to 60 mm with standard clamps Console table with 10 movable consoles, each with 2 suction cups, side and longitudinal stops, LED position display for vacuum suction cups 14* for laminate overhang; 10 extraction rails, connection for Power-Clamp, vacuum connection for templates SAFETY AND PROTECTIVE DEVICES: CE Compliant; SAFETY FENCING ON THE RIGHT WITH DOOR Equipment: DRILLING HEAD 30 SPINDLES: V20 / H10/ S360° “MPU” 10 HORIZONTAL SPINDLES GROOVING AND SEPARATING SAW ADDITIONAL ROUTING SPINDLE 6 KW FOR MPU DRILLING HEAD DRILLING/MILLING UNIT 4-SPINDLE FOR TOOL CHANGER MACHINING SPINDLE 15 KW DRIVE5C+ AGGREGATE INTERFACE DRIVE5C+ TOOL MEASURING PROBE FOR TOOL CHANGER SOFTWARE FOR POSITION MEASUREMENT & CNC AXIS ROTATION TOOL TRANSFER STATION 18-POSITION DISC TOOL CHANGER D=130 BELOW Kdjdpfjym Am Ssx Abvji PICKUP STATION FOR 350 MM SAW BLADE FOR DRIVE5(C)+ COOLANT TANK FOR MACHINING SPINDLE VACUUM PUMP 300/360 M³/H Control: POWERCONTROL PC85 WITH POWERTOUCH CONTROL SYSTEM; IPC POWERPACK, OPERATOR CONSOLE FOR PROGRAM START; CAMERA SYSTEM WITH TABLET PC WOODWOP CAD/CAM INTERFACE STANDARD DOCUMENTATION AND CONTROL TEXTS: GERMAN Delivery includes only the depicted tools and HSK holders!

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, operating hours: 1,350 h, HOMAG OPTIMAT BHX 200 Excellent condition. Low operating hours. Two drilling units for simultaneous line drilling. 5 milling tool positions. purchasing at schreinerei-moldaschl.de Kedpfoyr Rakox Abvodi

Condition: used, functionality: unexamined, Ferwood Code: RU0010622 - Manufacturer Code: 2-083-01-0276 - Condition: Used - Functionality: Not tested - Compatible Machine: - Weight: 3KG - Dimensions: 36X26X21 cm - If interested, we offer a refurbishment service. Please contact us. Kdsdpeyrq Alsfx Abvei

Condition: used, functionality: unexamined, Ferwood Code: RU0010621 - Manufacturer Code: 2-083-01-0278 - Condition: Used - Functionality: Not tested - Compatible Machine: - Weight: 3KG - Dimensions: 36X26X21 - If interested, we offer a reconditioning service. Please contact us. Kdsdpfx Absyrqzuevji

Condition: used, functionality: unexamined, Ferwood Code: RU0006834 - Manufacturer Code: 4-085-08-0202 - Condition: Used - Functionality: Not tested - Compatible machine: - Weight: 10KG - Dimensions: 70X46X34 - If interested, we offer refurbishment services, please contact us. Kdsdpsyrqyksfx Abvei

Condition: used, functionality: fully functional, Ferwood Code: AGG0073 - Manufacturer Code: 1-056-11-0660 - Condition: Used - Functionality: Fully functional - Compatible Machine: CNC HOMAG BAZ - HOMAG CENTATEQ - HOMAG BOF - WEEKE - Weight: 10KG - Dimensions: 46x39x27 - If interested, we offer an overhaul service; please contact us. Kjdpfx Absyrpxxjvodi

Condition: used, functionality: fully functional, Ferwood Code: AGG0073 - Manufacturer Code: 1-056-11-0660 - Condition: Used - Functionality: Fully functional - Compatible Machine: CNC HOMAG BAZ - HOMAG CENTATEQ - HOMAG BOF - WEEKE - Weight: 10KG - Dimensions: 46x39x27 - If interested, we offer an overhaul service; please contact us. Kdodpfx Ajyrpw Iobvei

Condition: like new (used), functionality: fully functional, Ferwood Code: RS0003572 - Manufacturer Code: 2-007-03-3970 - Condition: As new (showroom item) - Functionality: Fully functional - Compatible machine: - If interested, we offer an overhaul service, please contact us. 2KG - 36X26X21 Kdsdpfx Absyrn Ryevei

Condition: like new (used), functionality: fully functional, Ferwood code: RS0003547 - Manufacturer code: 3-008-23-1410 - Condition: As new (display item) - Functionality: Fully functional - Compatible machine: - If interested, we offer an overhaul service, contact us. 4KG 46X39X27 Kdedsyrn I Espfx Abvsi

Condition: like new (used), functionality: fully functional, Ferwood Code: RS0003546 - Manufacturer Code: 3-812-08-5500 - Condition: As new (display item) - Functionality: Fully functional - Compatible machine: - If interested, we offer a refurbishment service, please contact us. 3KG 36X26X21 Kdedjyrn Irspfx Abvji

Condition: like new (used), functionality: fully functional, Ferwood Code: RS0003545 - Manufacturer Code: 2-025-15-2020 - Condition: Like new (showroom piece) - Functionality: Fully functional - Compatible Machine: - If interested, we offer overhaul service. Contact us. 3KG 36X26X21 Kedpeyrn Ifsfx Abvodi