Used Hood for sale (851)

Condition: used, Year of construction: 2005, Machine: Kematec Korma 1 / Agraffa 1 Cork for sparkling wine / Wirehooder Dedpfs Ahlt Eox Aizjwd

Condition: used, Year of construction: 2003, Capacity: 900 to 3.000 bottles/hour Wirehood: Four-wire closures Bottle height: approx. 235 - 360 mm Magazine capacity: 1.600 corks Dsdpfs Ahln Sjx Aizjwd

Condition: repair required (used), Miwe Roll-in rotary oven - used - year of manufacture: 2011 - for sheet metal 60 x 100 Dodpfx Aj Aif Evsizewd - CS computer control system - fume hood with fan - oil burner - heat exchanger damaged - collection/dismantling from the bakery - price on request

Condition: used, This listing is for a QuattroFlow QF150 Diaphragm Pump. The unit is in full working condition and is ready for immediate release. The Quattroflow 150S is a 4-piston Diaphragm pump, which is mainly used to pump water-like fluids that are typically handled in research-, pilot plant- or production facilities of the pharmaceutical, biotech,food or cosmetic research centres or plants Examples: • Solutions containing proteins (albumin, IgG, Clotting factors, monoclonal antibodies, enzymes, vaccines.) • Solutions of polymers or suspensions (silicon, latex, chromatography media) • Cell suspensions (bacteria, yeast, algae, fungi, mammalian cells) • colloidal solutions • Suspensions of viruses or phage • Dairy products • Gelatine Dedsxx Avpjpfx Aizjwd • Supplements and ingredients for cosmetic and food Flow rate max.: Eccentric shaft 3° l/h (lpm) 100 (1.67) 100 (1.67) Eccentric shaft 5° l/h (lpm) 180 (3) 180 (3) Flow rate min.: Eccentric shaft 3° l/h (lpm) 1 (0.017) 1 (0.017) Eccentric shaft 5° l/h (lpm) 1 (0.017) 1 (0.017) Pressure: Temperature of fluid < 40°C bar (psi) 6 (87) 6 (87) Temperature of fluid > 40°C bar (psi) 4 (58) 4 (58) Temperature max.: Fluid °C (°F) 80 (176) 80 (176) CIP °C (°F) 90 (194) 90 (194) SIP °C (°F) 130 (260) 130 (260) Autoclave °C (°F) 130 (260) 130 (260) Suction lift dry at: 3000 rpm 3000 rpm Eccentric shaft 3° m (ft) 1-1,5 (3.2-4.9) 1-1,5 (3.2-4.9) Eccentric shaft 5° m (ft) 2-3 (6.6-9.8) 2-3 (6.6-9.8) Volume specifications: Approximated volume per revolution at free output ml 0,72 (3°) 1,2 (5°) 0,72 (3°) 1,2 (5°) Filling volume without connectors ml 15 15 Residual volume (after idle with highspeed motor) ml 1-3 1-3 Product wetted surface (approx.) cm² (inch²) 112 (17) 112 (17) Speed range pump rpm 10-3000 10-3000 Connection specification inlet (standard) Connector " 1/4" TC 1/4" TC Flange diameter mm (inch) 25 25 Internal diameter mm (inch) 4,7 4,7 Connection specification outlet (standard) Connector " 1/4" TC 1/4" TC Flange diameter mm 25 25 Internal diameter mm (inch) 4,7 (0.19) 4,7 (0.19) Position of connectors Inline Inline Number of flow directions 4 4 Diameter drive shaft mm 7 7 Product wetted materials (standard): Pump housing SS316L SS316L Valve plate SS316L SS316L Diaphragms Santoprene Santoprene Valves EPDM EPDM O-rings EPDM EPDM Non-product wetted materials (standard): Pump housing SS316L SS316L Bearing housing SS316L SS316L Base plate SS316 SS316 Hood SS316 SS316 Dimensions pump with motor and housing: Length mm (inch) 257 (10,2) 277 (10-91) Width mm (inch) 164 (6,5) 200 (7,87) Height mm (inch) 185 (7,2) 195 (7,67) Weight pump with motor and housing kg (lb) 9,8 (22) 11,2 (25) IP protection class pump IP 54 54 Operating temperature range °C (°F) 0…40 (32…104) 10…30 (50…86)

Condition: used, Manufacturer: MSK Tip: KOMBI-MULTITECH Year of manufacture: 2007 manual Dwsdpfx Ajq U Rhpjized The device is already disassembled and can be delivered immediately!

Condition: used, Hobart FTN Conveyor Dishwasher For sale is a professional, modular HOBART conveyor dishwasher from the proven FTN series. It was specifically designed for large-scale kitchens, hospitals, and canteens to quickly and efficiently clean immense quantities of dishes, trays, and cutlery. The unit has been professionally dismantled for removal and transport. Since the nameplate was lost during use, the model was identified as the Hobart FTN series based on the components, dimensions, and control system. It is an extremely robust, minimalist model that is operated directly and decentrally via the push buttons on the tunnel hoods (no vulnerable central display). Zone layout (from left to right): 1. Infeed zone with drive shaft for the finger chain and manual start/stop control 2. Pre-wash zone for coarse cleaning 3. Main wash zone for intensive hot cleaning 4. Rinse & neutral zone 5. Drying zone / outfeed with a powerful fan system for dry dishes Technical data: • Manufacturer: HOBART • Model series: FTN (Flight-Type Conveyor) • System type: Conveyor dishwasher / conveyor dishwashing system • Overall length: 7,000 mm (7.00 meters) • Overall depth: 820 mm (very compact, kitchen-friendly depth) • Overall height: 1,950 mm • Throughput / washing capacity: approx. 2,000 to 2,600 plates per hour • Fresh water consumption: very economical, approx. 240 – 300 liters per operating hour • Transport system: Original Hobart finger chain with pin guidance (included) • Operation: Decentralized start/stop buttons directly on the infeed and outfeed tunnel • Accessories: Integrated Ecolab dosing station for detergent & rinse aid Important: Since there is no longer a nameplate, the sale is expressly as shown in the pictures, without any guarantee regarding specific years of manufacture or exact sub-model numbers. A functional test on-site is currently not possible due to the dismantled condition. "Everything from one source: We would be happy to offer you a suitable financing solution for your project." Dwedpfo Adqhhex Aizod More items - new and used - can be found in our shop! International shipping costs on request!

Condition: new, Year of construction: 2024, functionality: fully functional, The REPLAY evo range offers basic products without sacrificing excellent quality. Equipped with advanced new and exclusive systems, it represents the most competitive solution of the new machines with bell from minipack®-torre. REPLAY 55 evo combines technological performance with essential and compact shapes, without sacrificing the excellent quality that characterizes minipack®-torre machines. - Power supply V 200/230 - Phase ph 1 - Installed MAX power kW 3.15 - Production per hour p/h (pph): 0-300 - Sealing bar useful dimensions: 540x390 mm - MAX product dimensions: 500x380x200 mm - MAX coil dimensions (diameter): 250 mm - MAX film reel dimensions (width): 600 mm - Work table height: 940 mm Djdpfeuakl Hsx Aizewd - Machine dimensions with protective cover open: 1260x810x1400mm - Machine dimensions with closed protective cover: 1260x810x1190mm - Machine weight (net/gross): 105/126 kg

Condition: used, Year of construction: 2007, Machine design: Cantilever machine Travel in X-direction: 5000 mm Travel in Y-direction: 1815 mm Travel (Z-axis): 600 mm Clearance height: 370 mm Number of main spindles: 1 Main spindle power: 12 kW Main spindle speed: 600-24000 rpm Vector-controlled spindle: Yes Clamping system: HSK-63 F Spindle cooling: Liquid cooling Number of axes: 5 Tool changer: Disc tool changer Tool change positions: 24 Back wall milling units: Yes Vertical drilling spindles – in X-direction: 12 Spindle speed vertical drilling spindle: 2000-6000 rpm Horizontal drilling spindle in X-direction: 2 + 2 Horizontal drilling spindle in Y-direction: 1 + 1 Spindle speed horizontal drilling spindle: 2000-6000 rpm Dwedpfxozwg H Ao Aizsd Monitor size: 15" Control type: PC control Operating system: Windows XP Typewriter keyboard: Yes Mouse: Yes Programming system: xilog Plus DXF interface: Yes Online connection possible: Yes CD-ROM drive: Yes Floppy disk drive: Yes Table design: Console table, tubeless Stop system: Stop cylinders Support arms: 8 Suction plates and clamps: various included Linear guides: 2 Number of vacuum pumps: 1 Vacuum pump capacity: 250 m³/h Alternating field configuration: Yes Safety guard, left: Yes Safety guard, right: Yes Extraction hood: controlled via axes Setup aid: Dot laser setup aid Safety features: Safety floor mats Central lubrication: automatic Tools: various tools available at an extra charge Dimensions: 7820x4730 mm Extraction diameter: 300 mm Storage location:

Condition: good (used), Year of construction: 2024, functionality: fully functional, Biesse ROVER C 1982 CNC Machining center (5-axis) Description; Working fields X = 8125 mm; Y =1950 mm Z= 470/500 mm UPS Closed chain cable holder X-axis 12 ATS Panel supports 48 sliding bases Pneumatic locking system in 2 work areas in X 8 aluminium lifting bar supports for loading ease of large and heavy pieces. 290 m3/h rotary claws vacuum pump Vacuum module - Size 132x146 - H74mm Vacuum module - Size 132x75 - H74mm Vacuum module - Size 132x54 - H74mm Belt conveyor for the removal of chips and off-cuts 21.6 kW (29.4 HP) operating unit with 5 interpolating axes HSK F63 adaptor and liquid cooling Djdpfe Af Ii Nsx Aizowd Suction hood with continuous positioning in Z controlled by NC Air-Jet cooling system Liquid chilling unit for liquid cooled systems Chain tool changer with 22 places at 180 mm centerdistance Strengthened gripper PC bTouch Presetter for the measurement of the tool length with diameter up to 130 mm bSolid 3D CAD-CAM program Additional license for bSolid Additional filter for vacuum pump SOPHIA - IoT Connection Roller lifting support in replacement of the standard one Enlargement of mesh guards and movement of the doors from front side to rear side to load profiles with length up to 11 meters (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: used, all stainless steel Dodpfx Aie Aid Rbozewd suitable for thermal oil heating heating separately adjustable in two areas adjustable speed belt width ± 1.000 mm total length ± 9.400 mm canopy with electric hoists Suitable for steam injection (to heat up and to improve product yields) suitable for CIP cleaning system outside dimensions (l x w x h): ± 12.609 x 2.098 x 3.400 mm with extra outfeed conveyor: (l x b): ± 2.000 x 1.000 mm in good condition Fully mechanically overhauled: New bearings, chains, seals, slide bushings, gears, … All (motor-)driven transmissions overhauled or replaced with new ones Hood and tank completely re-insulated New grill belt, standard dimensions for snack products All wear-sensitive components replaced or fully overhauled General cleaning, overhaul, and inspection of the construction Fully electrically overhauled + update of electrical cabinet and control system: All electrical components and cables replaced with new ones Conventional push-button operation with Jumo temperature PID controller New electrical diagrams (E-Plan) New sensors Coding/labeling of components and cables New thermal oil control station : Pneumatically operated 3-way thermal oil control valves (A, B, AB) By-pass circuit Thermal oil filters Bellows-sealed shut-off valves with handwheel Temperature reading Pressure measurement Stainless-steel frame (protective side panels for hot piping and components) Stainless-steel piping and flanges (for the thermal control station only)

Condition: like new (used), Year of construction: 2019, operating hours: 137 h, T45 thicknesser from Martin with Tersa cutterhead Planing width approx. 630 mm Planing height adjustable electrically from 2.8 to 300 mm, with digital display for reading in 1/10 mm accuracy with positioning control. The control system also offers the possibility of incremental adjustment, i.e., you can, for example, set a value of 1 mm and then repeatedly press the start button to change the planing height by 1 mm each time, without having to set a new absolute height each time. Furthermore, 99 fixed values can be saved as a program. Drive motor 5.5 kW with automatic motor brake 4-knife Tersa cutterhead with new knives Feed rate 6 + 12 m/min Rubber-coated infeed roller Rubber-coated outfeed roller Planed machine table guided on four leadscrews and guides for optimal stability Low-noise design with soundproof hood Dust extraction port 160 mm Emergency stop at the front and rear New Tersa knives Operating manual CE marking Original paint, not repainted Carpet in original condition No scratches on the table!! Only 137 operating hours, i.e., only 25 minutes per week!!! Dimensions approx. 1200 x 1300 x 1250 mm (L x W x H). Weight approx. 1200 kg. Djdpjz Icvlofx Aizewd The machine can be demonstrated on site by appointment. We only offer machines that are available in our warehouse and ready for demonstration, see "other offers from this seller".

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Mafell Elektronik handheld router LO 65 Ec with Arunda 80N Maxi and LO-FA router adapter used, from business liquidation Woodworking machine with fine adjustment for routing depth for delicate work, as well as template applications in solid wood Technical data according to the manufacturer: Mafell handheld router Type: LO 65 Ec Year of manufacture: 2021 Routing depth: 0 - 65 mm Universal motor: 230 V Tool holder (mm): 1/2" / 6 - 12 mm Dsdpfxsz H Up Is Aizewd Design: MidiMAX in T-MAX Weight: 6.9 kg Idle speed: 10000 - 22000 1/min Power: 2600 W additional accessories, as shown in the picture: Mafell Arunda 80 N router template, year of manufacture 2022 Mafell LO-FA router adapter Copy ring ø 27mm Dust extraction hood We recommend an inspection to avoid misunderstandings. Information provided without warranty Information, details, and technical data from the manufacturer To prevent any misunderstandings regarding the item's condition and the scope of the auction, we generally recommend an inspection BEFORE placing a bid! Further technical data can be requested from the manufacturer. Our business hours are from Monday to Friday between 8:30 am and 12:00 pm and 1:00 pm to 4:30 pm. During this time, inspections and collections are possible and desired, AFTER prior appointment. Subject to prior sale, changes, errors and printing errors.

Condition: used, This listing is for a Qiagen Qiagility PCR Prep System. The unit is in full working condition and is ready for immediate release. The Qiagen QIAgility Automated PCR Prep System provides users with a fully automated PCR setup, responsive software, and increased productivity. This compact, bench-top liquid handling robot eliminates the need for manual pipetting steps, with high precision and reproducibility. The Qiagen QIAgility uses Qiagen PCR kits and step-by-step guided software to automatically calculate all mixes and worktable set up so you won’t need to program pipetting steps. This PCR prep system uses a single-channel pipetting head with dynamic liquid level sensing and supports almost any kind of thermal cycler and lab ware. HEPA filter: Preinstalled dual-cartridge 3M Air-Mate HEPA (High-Efficiency Particulate Air) filter system provides positive pressure clean air within the closed hood. Liquid-level sensing: Minimum detection volume (10 µl in 200 µl PCR tubes). Only functional in combination with QIAGEN Conductive Filtered Tips. Dwjdpfx Aisxx Axqszed Pipetting head: Single-channel Precision: CV

Year of construction: 2024, condition: used, functionality: fully functional, Exhaust hood M4000 Technical specifications for each exhaust hood: Working width 4,000 mm Working height 3,000 mm Overall width 4,050 mm Overall height 3,050 mm Overall depth 750 mm Airflow rate 15,000 m³/h Fan 2 units, Atex Motor 2 x 3.6 kW, with Ex protection Scope of supply for the exhaust hood: 1 Exhaust hood housing, consisting of modules, entirely made of galvanized sheet metal 1 Set of labyrinthine pre-filters made of paper Dodpfx As Ahmwyjizowd 1 Set of filter mounting frames with filter material made of glass fiber 2 Radial fans with spark protection, Ex protection

Condition: used, Year of construction: 1997, Manufacturer: Telstar Model: LPP1600 Year : 1997 (never used)   Material :Polished stainless steel Power : 2500 w 1 vertical box 1 horizontal box Dwodjx R Awgjpfx Aized Flux placed across the width of the other box Control panel on 1 side 3 sides with straps 3 neon lights laminar flow surface 200 x 150 cm Height: 200 cm Overall dimensions 250 x 150 x 250 cm   Feet or suspension mounting required

Condition: used, Year of construction: 2010, Overview This wirehooder was manufactured in 2010 by Robino & Galandrino. The RECORD 14000 is designed for the application of wire hoods on bottles. The machine was in production until the end of March 2026 and is in working condition. The machine has been inspected, cleaned, and lubricated. Technical data  - Capacity: up to 14,000 bottles/hour Dodpfx Aszdb Ensizewd - Application: Wire hood application - Configuration: RECORD 14000 - Utilities: 400 V / 3F / 50 Hz / ICC 20 A / IN 4.15 A

Condition: excellent (used), operating hours: 2,871 h, fuel type: electric, total height: 1,550 mm, color: other, Year of construction: 2018 GVW: 1.190 kg Lifting capacity: 5.000 kg Fork length: 0 cm Dsdpfx Ao Ad Rz Ioizowd Battery 24V 3PzS 465Ah 2021! 220V high frequency charger, Wheels 90%, Hoods 100% OK!

Condition: used, Year of construction: 2020, Panel saw Manufacturer: Felder Format4 Type: Kappa 550 Year of manufacture: 2020 Technical data - Circular saw unit, 0 - 46° swivel, maintenance-free, - Maximum cutting height 200mm, under-table dust extraction - Upper guard, cutting width 1000mm, hood for 90° cuts and hood for angled cuts, height-adjustable and can be swiveled away - Dust extraction connection 100mm - Circular saw table extension up to 1200mm behind the saw axis - Parallel fence with fine adjustment, fence ruler length 1200mm, can be swiveled - Crosscut fence 3200mm, swivels 90-45° - Kappa 550 control unit with programmable angle and height positioning, cutting height correction during swiveling - Machine stand Kappa 550, circular saw table 1180x610mm - Electrical system Kappa 550, 2x400V 50Hz CE, 10 kW S6 with star-delta starter - 3 speeds 3000/4000/5000 rpm. Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding. Dwodpfx As Ah E Rzeizjd

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Video available at: Dedpfx Aiozt Twyozewd Base machine - Dynestic 7535-R Automatic 12.7 Dynestic table For classic nesting machining with wear plate Machining length: 3700 mm Working direction: from right to left Machine frame in welded construction with ground and hardened prism guides for the traversing carriage, aggregate head and consoles Traversing carriage in gantry design Rack and pinion drive, helical, in X and Y direction, Ball screw spindles Z-axis for precise positioning Technical data: Machining dimensions: Max. load on nesting table X = 3700 mm Y = 2200 mm Max. travel distances X = 5295 mm Y = 2935 mm Z = 565 mm Max. clearance height DYNESTIC table Z = 250 mm from the top of the table (without wear plate) Maximum programmable speed Vector speed: 128.0 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min 4-stage extraction hood with pneumatic height adjustment and viewing window Voltage 400 V, 50/60 Hz CONTROL: Dual-core processor Operating system: Windows XP 80 GB hard drive / 1 GB RAM RJ45 network connection 10/100 Base-T Fast Ethernet US keyboard and Microsoft IntelliEye mouse (optical) CD-ROM / CD-RW drive (CD burner) Remote maintenance Integrated network card for data transmission of control and program data. Data transmission via high-speed internet connection Requirement: High-speed internet connection to the machine. DYNESTIC table Solid, continuous machining table with grid spacing, continuous grooves in X and Y direction, Groove spacing: 50 mm with 25 meters of sealing cord for securing the wear plate 1 machining field with stop strips / stop Height: 30 mm, pneumatically lowerable 2 stop strips in Y direction and 1 stop in X direction on the right (when viewed from the front of the machine) Vacuum fields 1-circuit vacuum system Drilling unit 7881-R, 24 spindles Drive power 3.0 kW, incl. saw unit 18 vertical spindles individually selectable Arrangement in L-shape, 11+2 in X and 6 in Y direction 32 mm grid Max. drill diameter: 35 mm Total drill length: 70 mm from the mounting end (depending on plate thickness) Spindle extension stroke: 70 mm Rotation direction: alternating clockwise / counterclockwise n(max.) 1000 - 5710 min-1, infinitely variable Mount: M 10 thread - clearance fit 11 mm without tool, without mount 6 horizontal spindles 2 twin drill spindles in X direction (distance 32 mm between 1st and 2nd horizontal drill spindle) 1 twin drill spindle in Y direction Mount: M 10 thread, clearance fit 11 mm Total drill length max. 70 mm from the mounting end without tool, without mount Pressure booster, increases the standard pressure from 6 to 8 bar 5-axis milling unit 7844, Power: 10.0 kW (S6) cardanic, C-axis rotatable +/- 360°, A-axis rotatable +/- 180° n(max.) = 0 - 24000 min-1, infinitely variable, max. power at 12000 min-1 to 24000 min-1 Liquid cooling (cooling unit included) with HSK-F 63 tool holder with right-hand thread (for right-hand cutting tools) with collet chuck with HSK shank Ceramic ball bearings (hybrid bearings) Tool weight max. 6 kg (incl. holder) Tools:

Condition: excellent (used), Year of construction: 2016, operating hours: 1,198 h, Brandt Ambition 1120 c edge banding machine with 2 glue pots, joining, corner copying, and two trimming blades. A good entry-level machine with extensive features. A video of the machine in operation can be sent upon request. Edge thickness: approx. 0.4 - 3 mm Workpiece height: approx. 10 - 40 mm Feed rate: approx. 8 m/min Noise protection hood Extendable workpiece support Dust extraction connection: 1x100mm, 4x80mm including the depicted ducting to 200mm Easy-Touch control with color screen for easy machine operation 10 programs can be saved Units: Upper pressure: manual adjustment with crank and SIKO counter Infeed fence: manual adjustment with SIKO counter Joining cutter with diamond cutters, sharpened Total of 2 interchangeable glue pots for quick color change from white to transparent Gluing unit with automatic edge feed for roll material up to 3mm Pressure zone with 3 rollers Miter saw with 2 motors Combination milling unit, easily adjustable by hand for flush trimming, chamfering, and radius Dwsdpezn Afpjfx Aized Corner rounding cutter R2 with diamond cutter, 1 motor Radius trimming blade R2, manually adjustable Glue joint trimming blade with large roller, pneumatically controlled Hood locking mechanism CE marking Operating manual as a binder All insertable blades of the milling units and trimming blades have been replaced or re-sharpened, saws sharpened, and diamond joining cutters sharpened. The machine is therefore ready for immediate use. Only the diamond cutter of the profiling cutter has not been replaced, but is still sharp. Original paint, with only a few spots retouched. Dust extraction hoses renewed. Approx. 1200 operating hours, which is only 1/2 hour per day. Machine dimensions: approx. 4300 (with table) x 1250 x 1600 mm (LxWxH) Weight: approx. 950 kg. The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration and are in stock in our warehouse; see "other offers from this supplier".

Condition: used, functionality: fully functional, The Dibipack 4255 EV from Italdibipack is a small, microprocessor-controlled shrink wrapping machine. Automatic adjustment of the sealing temperature to the operating cycle guarantees stable and consistent seams. The shrinking process, combined with the simultaneous sealing of the film, is completed in a single operation. The product is placed inside the film and then drawn into the shrink chamber. The hood is now manually closed and held in place by an electromagnet. The automatic cycle then begins, during which the film is sealed around the product Dwode Afdmyjpfx Aized and shrunk, conforming closely to the product's shape. The shrinking is achieved by heating the air, which is simultaneously circulated by a fan. Once the process is complete, the hood opens automatically, and the finished, packaged product can be removed. For bagging products, the film can be sealed without subsequent shrinking. Up to 8 different work programs can be stored via the control panel. Parameters such as shrink temperature, shrink time, and the sealing time of the sealing strip can be easily and conveniently adjusted on the operating panel. An electronic counter informs you about the product flow. A mobile base, which makes the Dibipack 4255 EV even more flexible, is available as an accessory. The Dibipack 4255 EV can be used to process PVC, PE, PO, LDPE, OPP, CP films, all sealable films, as well as micro-perforated and food-grade films. The machine has undergone a thorough inspection in our in-house workshop and is fully functional. Upon request, a video of the machine can also be sent. You will receive an invoice with VAT shown. Our used equipment service for you: 6-month warranty on electrical parts, limited to the replacement of defective parts, without installation and removal costs. High-quality branded equipment at fair prices. Professional refurbishment / inspection & expert cleaning. Checked & fully functional - or your money back. Flexible options for shipping or self-collection. Competent advice - before and after purchase. Provision of operating instructions, wiring diagrams & spare parts. Inspection according to DGUV V3. Technical data: Max. output per hour: 240-360 pieces Power connection: 230 V - 1 phase Rated power: 3 kW Working table height with base: 920 mm Sealing frame L x W: 550 x 420 mm Max. product height: 200 mm Machine dimensions, L x W: 1,235 x 750 mm Max. film width: 600 mm Max. film roll diameter: 250 mm Machine weight: 87 kg Condition: used, fully functional Further details: Up to 8 different work programs can be stored. Microprocessor-controlled processes. Energy-saving standby function. Hood opening system with gas spring. Electronic counter. Quick and easy adjustable film unit for different product sizes. Processing of different films. Shipping: Delivery or self-collection by arrangement. Worldwide shipping on request. Shipping to islands or mountain stations only by arrangement. Subject to change and errors.

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 04/2001, loading space length: 13,630 mm, loading space width: 2,550 mm, loading space height: 2,970 mm, total length: 13,900 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 445/45 R19.5, wheelbase: 12,000 mm, color: other, Equipment: ABS, = Additional options and accessories = - Air Suspension - Expandable - Lift Axle - Lifting Roof - Stability Control - Sunroof - Super Single Tires Dsdszzp Idopfx Aizjwd - Work lamp(s) = Remarks = Superstructure Fifth wheel height: 95 cm Meusburger Mega Low Loader Year: 2001 Extendable: 310 cm Height adjustable: 347 cm Length: 13.63 cm Floor height: 99 cm Lashing eyes Sliding hood (Edscha) Heavy-duty semi-trailer (Peak load) Perfectly maintained Completely renovated in 2017. = More information = General information Year of construction: 2001 Registration number: OP-64-XS Axle configuration Tyre size: 445/45 R19.5 Suspension: air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg; Brakes: disc brakes Rear axle 3: Max. axle load: 9000 kg; Brakes: disc brakes Weights Empty weight: 8.000 kg Carrying capacity: 27.500 kg GVW: 35.500 kg Functional Height of cargo floor: 99 cm Condition Technical condition: very good Visual appearance: very good = Dealer information = For more photos see: Why you buy from Thomas Trucks? That choice is simple. Thomas Trucks is one of the independent trading companies worldwide in the field of used commercial vehicles. Here you can choose from an ever-changing stock of second hand trucks, tractors, trailers and trailers. Our offer includes all European brands, construction years and price ranges. Here you will always find a good vehicle for the right price! Thomas Trucks always has: - Sharp prices - Good service - Spacious, rapidly changing stock - Known quality - Decent business - We speak many languages - Accompaniment input and transport - (Export) license plate quickly arranged - Professional technical services - And more. Visit the website: and view our complete range and competitive offers We are open 6 days a week. Do you need help with exporting, importing, or shipping your vehicle? Contact our sales team. Selling your current vehicle to us is also possible. We do our best to display the data as accurately as possible, however no rights can be derived from this data We can also arrange financing for you within the Netherlands.

Condition: used, Year of construction: 2010, machine/vehicle number: GA25, Used ROBINO & GALANDRINO WIREHOODER 14000 BPH - Year 2010Technical Specifications & Performance DataThe Robino & Galandrino RECORD 14000 is a high-performance wire-hooding machine engineered for consistent and precise application of wirehoods on glass bottles. Built in 2010, this second hand unit has been maintained in working condition and is well-suited to upgrade an existing used bottling line or expand industrial packaging capacity in beverage production. Its robust design and dependable mechanics enable stable, continuous operation at elevated speeds typical of modern bottling equipment.Machine Type: WirehooderManufacturer: Robino & GalandrinoModel: RECORD 14000Year of manufacture: 2010Production speed: up to 14,000 bottles/hourContainer types: Designed for Glass bottle handlingApplication: Wirehood application for sparkling beveragesElectrical supply: 400 V, 3-phaseFrequency: 50 HzNominal current (In): 4.15 AProtection (ICC): 20 AWiring diagram code: REC262Certification: CEAdvanced Automation & Control SystemsThe machine integrates an industrial electrical system referenced by wiring diagram code REC262 and operates on a 400 V 3-phase, 50 Hz supply. Designed with CE-compliant safeguards, the wirehooder supports reliable, repeatable performance with consistent wirehood placement and twist integrity. Safety interlocks and emergency-stop circuitry help protect operators during operation and changeovers. The unit’s design facilitates quick adjustments for bottle handling components, simplifying setup across compatible formats and maintaining high uptime on a modern packaging line.Production Line Integration CapabilitiesThis wirehooder integrates seamlessly downstream of corking and upstream of labeling within a glass bottling line. It is compatible with standard conveyor interfaces and can be synchronized with upstream and downstream equipment such as corkers, foil applicators, labeling machines, and secondary packaging systems. The RECORD 14000 supports continuous in-line operation or can be configured as a standalone station with appropriate infeed and outfeed conveyors. Its performance profile and interface flexibility make it an effective addition to beverage production lines focused on sparkling products packaged in glass bottles.Machine Condition & Maintenance HistoryThe unit remained in production until the end of March 2026 and is currently in working condition. It has been inspected, cleaned, and lubricated, demonstrating careful upkeep consistent with efficient line operation. The machine is available immediately, enabling rapid deployment and minimal downtime for facilities seeking to augment capacity or replace an older wire-hooding station.Operational Performance & VersatilityEngineered by Robino & Galandrino, the RECORD 14000 delivers high-speed wirehood application with stable bottle handling and consistent twist quality. Its construction supports sustaine... Dwedpjzvprlefx Aizod

Year of construction: 2013, condition: refurbished (used), functionality: fully functional, This is an XXL SCC 102 with 10 x 2/1 or 20 x 1/1 GN combination steamer, offering the same capacity as a standard SCC 201 model with a tray trolley in an electric version, from the premium manufacturer Rational, built in 2013, including the base frame. A matching Rational UltraVent exhaust hood can be purchased separately, upon request. The combination steamer does not have racking shelves, but rather a tray trolley. A suitable transport trolley for easier loading can also be purchased upon request. The unit has been completely refurbished in our in-house workshop, and the combination steamer is fully functional. The list price is €18,170 net. You will receive an invoice with VAT shown. Service: We will gladly assist you in arranging a certified Rational customer service technician. Are you looking for a specific Rational device type? Ask us, we have access to a wide range of used and new equipment. We will be happy to advise you on all device types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. Our used equipment service for you: • 6-month warranty on all electrical parts, limited to the replacement of defective parts, without installation or removal costs • High-quality branded equipment at fair prices • Professional overhaul / inspection & expert cleaning • Tested & fully functional - or your money back • Flexible shipping or self-collection options • Competent advice - before and after purchase • Provision of operating manuals, wiring diagrams & spare parts • Inspection according to DGUV V3 Technical data: • W x D x H: approx. 1069 x 976 x 1042 mm • Power connection: V: 400 / kW: 36.7 / Hz: 50/60 • Capacity: 10 x 2/1 GN or 20 x 1/1 GN • Weight: approx. 185 kg • Serial number: E12SH13112376801 • Year of manufacture: 2013 Condition: used, completely refurbished, fully functional Additional information: • In combination steamer mode, 3 operating modes are available: steam (30°C to 130°C), hot air (30°C to 300°C) and combination (30°C to 300°C) • Care Control - self-cleaning system • Core temperature sensor • Handheld spray nozzle with automatic retraction • 8.5-inch color display and touchscreen • 5 fan speeds programmable • Integrated, maintenance-free grease separation system • Automatic start time preselection • 7 cleaning levels for unattended cleaning - also overnight • Moistening can be adjusted in 3 stages - from 30°C to 260°C • 5 programmable fermentation stages • USB interface • Seamless, tub-shaped hygienic baking chamber, rounded corners • Halogen baking chamber lighting Dwedpfj Agu Hysx Aizod Shipping: • Delivery or self-collection upon request • Worldwide shipping on request • Shipping to islands or mountain stations only upon request Subject to changes and errors. Do you have any questions, would you like to receive advice or would you like to see something on site? You can reach us by telephone during our opening hours: Monday to Friday from 9:00 a.m. to 1:00 p.m. and from 2:00 p.m. to 5:00 p.m. The sale is exclusively subject to our general terms and conditions.

Condition: used, This listing is for the J Engelsmann Jolting Volumeter STAV 11 The unit is in full working condition and is ready for immediate use Engelsmann Jolting Volumeter STAV 11) — a compact laboratory instrument used to assess the tamped density and volumes of bulk solids before and after compaction. The Jolting Volumeter STAV II, produced by J. Engelsmann AG, is a laboratory device engineered to measure the apparent (pre-compaction) and tapped (post-compaction) volumes of bulk materials—such as powders, granulates, and fibrous products—thus enabling calculation of tamped or tapped density Compliance with standards: Supports analysis in line with European Pharmacopoeia, DIN ISO 787 Part 11, ISO 3953, ISO 8967, and ASTM B 527-93 Adjustable tamping mechanism: Allows custom setting of the number of jolting strokes deviating from default programs Dwodpfoxhd E Rsx Aizjd Measurement cylinders: Compatible with a range from 10 ml to 1000 ml, with 250 ml typically standard; cylinders are interchangeable and secured via a strong retaining ring and gasket Ease of use and cleaning: Designed with a modern, rounded “soft design” that’s easy to clean and operate via a user-friendly display and control unit Optional accessories: Can be fitted with a sound-absorption hood for quieter operation